Fulltext results:
- Error message: Your connection has been blocked temporarily - Try again later
- er'', this means the Intrusion Prevention System (IPS) in VPOP3 has detected abnormal behaviour from your IP address, and it has applied a temporary block to ... MTP Service===== You can set how the SMTP Service IPS works by going to ''Services -> SMTP -> IDS/IPS'' in the VPOP3 settings. {{:how_to:smtp_ips.png?noli
- How To Setup VPOP3 Service Security
- rious services depending on the client computer's IP address. This is useful if you want to allow access from only certain IP addresses (eg within your LAN) and prevent access from other IP addresses (eg the Internet). With some services ... an also restrict access to certain users on those IP addresses. These are generally only those service
- Setting up an iPhone/iPad/iPod Touch
- ======Setting up an iPhone/iPad/iPod Touch====== To set up an iPhone to access VPOP3's mail, you first of all need to configure VPOP3 t
- We installed a new router and now nothing works
- cause it may be that the new router allocates new IP addresses on your network. Note that this topic ... are set up with a router automatically allocating IP addresses to computers. It does this using a syst... with payment details for this service. =====New IP address===== If the router decides to allocate a new IP address to VPOP3, then anything which is connecti
- Allow Remote Access to VPOP3 Mailboxes
- -> Webmail**, as appropriate). Then, go to the **IP Access Restrictions** tab. Press the **Add** butt... -> Webmail**, as appropriate). Then, go to the **IP Access Restrictions** tab. Press the **Add New Re... nyone with a valid username and password from any IP address - you may want to [[VPOP3 Access Security... t to the Internet, and use your external Internet IP address assigned by your ISP. If your office has
- Exchange 2007
- he same computer, you will need to change the TCP/IP port assignments for the SMTP service in Exchange... tab. In the top half of this page, called **Local IP Addresses** select each address in turn, and pres... art hosts:** - Press **Add**. Enter the name or IP address of the VPOP3 computer. Press **OK**. Pres... art hosts:** - Press **Add**. Enter the name or IP address of the VPOP3 computer. Press **OK**. -
- 421 4.3.2 VPOP3 Too many connections from your IP address - try later
- ===421 4.3.2 VPOP3 Too many connections from your IP address - try later====== If you see this error m... ected too many simultaneous connections from your IP address. This would usually happen if the sender... ns are incoming or not by looking at the sender's IP address. If this is allowed by the IP Access Restrictions with 'No Auth' specified, then it is treate
- 550 5.7.1 Relaying not allowed! Bad sender IP address
- ======550 5.7.1 Relaying not allowed! Bad sender IP address====== This SMTP error message means that ... ase, you need to go to Services -> SMTP Server -> IP Access Restrictions, and check that the required ... ration to make sure that it is using the internal IP address of the VPOP3 server. Some routers have a ... Reflection]] which allows you to use the external IP address from inside the network. That is OK, but
- Find the IP address of the VPOP3 Computer
- ======Find the IP address of the VPOP3 Computer====== To find the IP address of the VPOP3 computer, in Windows go to C... Press the Local Area Connection link {{:how_to:ipaddr1.png|}} Then press 'Details'. {{:how_to:ipaddr2.png|}} Look for the 'IPv4 Address' setting.
- Setting up VPOP3 to work with Exchange 2003
- he same computer, you will need to change the TCP/IP port assignments for the SMTP service in Exchange... il servers, they may both try to use the same TCP/IP ports which will lead to conflicts if they are bo... o the following smart hosts option, and enter the IP address of the VPOP3 computer in square brackets,... given to you by your ISP, and 192.168.1.1 is the IP address of the Exchange Server computer. Also, i
- Using VPOP3 with Microsoft Exchange Server
- he same computer, you will need to change the TCP/IP port assignments for the SMTP service in Exchange... en to you by your ISP, and ''192.168.1.1'' is the IP address of the Exchange Server computer. Also, i... the email address on the Exchange Server, and the IP address:port of the Exchange Server SMTP service.... e ''Forward all messages to host:'' and enter the IP address of the VPOP3 computer. ===Avoiding other
- Accepting Incoming SMTP through a router
- r to allow inbound connections on port 25 for the IP address of the mail server. Your ISP should be able to tell you what IP address they have assigned as the address of your... have specified that your mail server should be on IP address ''123.123.123.123'', you would need to have something like: interface BRI0 ip access-group 110 in ! access-list 110 permit
- Incoming SMTP Feed
- er the **@** sign). * You must have a permanent IP address on the Internet for incoming SMTP to work... e to know where to send your messages, so if your IP address can change, they will lose track of where... open relay, but if you change the SMTP service **IP Access Restrictions** without understanding what ... t to a host name which resolves to your permanent IP address. That's it - Ensure that the ''Local Do
- Sender Policy Framework / SPF
- = SPF is a system used to tell mail servers which IP addresses can send mail from which domains. It is... your mail software can check that it came from an IP address authorised to send mail from your bank, a... th suspicion if it didn't come from an authorised IP address. SPF is described in detail at [[http://... em: - configuring SPF to indicate the approved IP addresses for sending mail. This is useful to hel
- Delete OutQueue messages directly from the database
- n tell this because the 'senderip' is an external IP address, and the 'authsender' is blank * 'hacke... n tell this because the 'senderip' is an external IP address, and the 'authsender' is not blank - in t... n tell this because the 'senderip' is an internal IP address - check the computer with that IP address ====To delete the messages==== To delete all the
