Fulltext results:
- Mail Collectors @reference
- ner in the cycle than others. If you have, say, 10 Collectors which each take 1 minute and are scheduled every 10 minutes, each with the priorities 1-10, then the 'priority 1' Collector will be processed at, say, 10:00, 10:10, 10:20 etc. The 'priority 5' Collector
- PostgreSQL Replication @how_to
- we will have a Master PC, on IP address 192.168.1.10, a Slave PC on IP address 192.168.1.20, and a file share at \\192.168.1.10\pgsql\db_replication (note that you need to ac... e = on archive_command = 'copy %p \\\\192.168.1.10\\pgsql\\db_replication\\%f' max_wal_senders = 5... the lines: host replication postgres 192.168.1.10/32 trust host replication postgres 192.168.1.20
- Can I add two licences together? @faq
- cannot add VPOP3 licences together. If you have a 10 user licence, and you need more users, you need t... t buy a 5 user licence and add it to the existing 10 user licence. This is because the price per user... as the licence sizes increase (eg £9 per user for 10 users, and £6 per user for 25 users). Some other ... han to add licences. For instance, if you have a 10 user licence, then need to upgrade to 20 users, i
- Mail Connectors -> Connector Schedule @reference
- ecting every 1 minute, and you have it set to use 10 connections, it is entirely possible the later co... o connect every minute, but this option is set to 10 minutes, then VPOP3 will only connect every 10 minutes, rather than every minute. Use **0** (zero) t... nnect every 5 minutes, and the time is changed to 10:00, VPOP3 will now connect at 10:05 if this optio
- Users.AutoresponderConditions table @reference
- field For instance, a datetime range of 2012-03-10 10:00:00 to 2012-03-17 15:00:00 will act for the whole time period from 10 am on 10th March 2012 to 3 pm on 17th March 2012, but a date range of 2012-03-10 to 2012-03-17 and a time range of 10:00:00 to 15:
- Autoresponder Commands @reference
- ill work between the two dates, eg **<Valid:1/2/2010-10/2/2010>** to make the autoresponder work between 1st February 2010 and 10th February 2010 (inclusive), assuming the
- Performance Requirements @how_to
- (or more processors). Don't worry about bursts to 100% for a minute or so, or while VPOP3 is downloadi... the number of striped disks you have in a RAID 0/10 array) then performance is probably being limited... M SAS (SCSI) drive will be capable of around 175-210 IOPS, a typical 7200 SATA drive will be capable of around 75-100 IOPS. If you put these into a RAID 0 or RAID 10
- SMTP Relay Service FAQ @faq
- s / 750 MB per month - £40 per yr * 7000 msgs / 1050 MB per month - £55 per yr * 10,000 msgs / 1.5GB per month - £70 per yr * 15,000 msgs / 2.25GB p... nted multiple times. So, if you send 1 message of 100kB to 1 person, that counts as 1 message, and 100kB size. If you send the same message to 15 people,
- Which versions of Windows will VPOP3 run on? @faq
- [[https://www.microsoft.com/en-us/windows/windows-10-s|Windows 10 S]]") =====Version 9.0 or later===== VPOP3 version 9.0 or later requires Windows 8.1/20... 32 bit and 64 bit Windows. =====Version 7.2 to 7.10===== VPOP3 version 7.2 to 7.10 requires Windows Vista/2008 or later. It should run on both 32 bit and
- Mail Sender Advanced Settings @reference
- e the last number So, a Sender Retry setting of '10,30' means that VPOP3 will retry a message 10 minutes after first trying to send it. If that fails as ... st retry or two set to a short delay such as 5 or 10 minutes. This will mean that [[wp>greylisting|gre... not slow down other messages. So, for instance, **10,10,30,60,60,180** could be a sensible retry schem
- Lua SMTP MX Server Rules @reference
- this destination =====CheckServer===== (VPOP3 7.10 and later) ''CheckServer("<Domain>", "<MX Server... It will also hold the message in the Outqueue for 10 minutes, so it isn't immediately resent. (If it is attempted after 10 minutes, and there are still lots of recent failu... mber(x[1].cnt) > 5 then return false, 10; end end end </code> =====FinalOv
- Error Message Handling @how_to
- see several lines something like this: 0~0~0~0~10060 1~0~0~0~11001 Each line is made of 5 fields, separated by '~' This means that VPOP3 has receiv... '0' (displayed as In Mail '1') which was an error 10060 and one on In Mail '1' (displayed as In Mail '2') which was an error 11001 The 3 '0's between the 'object ID' and the 'Er
- Find biggest messages @reference
- ======Find biggest messages====== To find the 10 biggest messages in your VPOP3 message store: Go to... ON u.usernumber=f.userid ORDER BY size DESC LIMIT 10; </code> N.B. VPOP3 does not need to be stopped
- Management Scripting @reference
- ore continuing, so if the '1 minute' script takes 10 minutes to run, it will run it again soon after the first one has completed, rather than having 10 copies of the script running at once.
- SMTP Direct Sender Settings @reference
- you don't specify a priority, then the priority '10' is used. - Check message size - specify ''$siz... s VPOP3 how many messages it should send at once. 10 is a good starting number. If you set it too high
