Fulltext results:
- PostgreSQL Replication
- we will have a Master PC, on IP address 192.168.1.10, a Slave PC on IP address 192.168.1.20, and a file share at \\192.168.1.10\pgsql\db_replication (note that you need to ac... e = on archive_command = 'copy %p \\\\192.168.1.10\\pgsql\\db_replication\\%f' max_wal_senders = 5... the lines: host replication postgres 192.168.1.10/32 trust host replication postgres 192.168.1.20
- Performance Requirements
- (or more processors). Don't worry about bursts to 100% for a minute or so, or while VPOP3 is downloadi... the number of striped disks you have in a RAID 0/10 array) then performance is probably being limited... M SAS (SCSI) drive will be capable of around 175-210 IOPS, a typical 7200 SATA drive will be capable of around 75-100 IOPS. If you put these into a RAID 0 or RAID 10
- Internet Explorer 10 Issues
- ======Internet Explorer 10 Issues====== If you are using IE10 with VPOP3 prior to v6.2, then you may have issues accessing the ... ettings. These can usually be solved by telling IE10 to use '[[http://windows.microsoft.com/en-GB/internet-explorer/use-compatibility-view#ie=ie-10|compatibility mode]]'. Alternatively, using anot
- Accepting Incoming SMTP through a router
- hing like: interface BRI0 ip access-group 110 in ! access-list 110 permit tcp any host 123.123.123.123 eq smtp in your configuration. ====Wit... hing like: interface BRI0 ip access-group 110 in ! ip nat inside source static 192.168.1.1 123.123.123.123 access-list 110 permit tcp any host 123.123.123.123 eq smtp in y
- Error Message Handling
- see several lines something like this: 0~0~0~0~10060 1~0~0~0~11001 Each line is made of 5 fields, separated by '~' This means that VPOP3 has receiv... '0' (displayed as In Mail '1') which was an error 10060 and one on In Mail '1' (displayed as In Mail '2') which was an error 11001 The 3 '0's between the 'object ID' and the 'Er
- How to configure Outlook 2010
- ======How to configure Outlook 2010====== In many ways, configuring Outlook 2010 is a similar to configuring [[outlook_2007|Outlook 2007]... SMTP authentication, to set it up with Outlook 2010's new ribbon interface, go to **File -> Info -> A
- Installation conficts
- (eg AVG) installs a POP3 'proxy' service on port 110. This will appear to conflict with VPOP3. However... ly. If you change the POP3 service port (eg to 5110) then you must remember to change the email clien
- Troubleshooting Tips
- For instance, to test the POP3 service (port 110) if VPOP3 is on 192.168.1.1, type: Telnet 192.168.1.1 110 The response should say something like: +OK
- Upgrading VPOP3 to version 8.x from v7 or earlier
- m v7 or earlier====== VPOP3 v8.x uses PostgreSQL 10 as its database engine, which is the latest suppo... aller uses the '[[https://www.postgresql.org/docs/10/pgupgrade.html|pg_upgrade]]' utility to perform t
- Messages being put into an 'Unwanted' folder
- tering. See: [[http://exchangeitup.blogspot.co.uk/2014/10/exchange-2010-extra-junk-or-unwanted.html]]
- How To Encrypt Sessions
- fferent TCP port from normal (eg POP3 is on port 110, POP3S is on port 995). SSL connections are encry... carried out on the same port as normal (eg port 110 for POP3). With STARTTLS connections they start o
- Don't download big messages during the working day using Download Rules
- === Say you don't want to download messages over 10,000,000 bytes long between 8:00am and 6:00pm. To ... * **Size** - **Is Greater Than Or Equal** - **10000000** You also have to tell VPOP3 to **Leave M... t tells VPOP3 to ignore messages if they are over 10,000,000 bytes and the time now is between 8am and
- Delete OutQueue messages directly from the database
- ===To see summary information of the most recent 10 messages=== ''SELECT senderip, authsender, return... OM outqueue.outmessages ORDER BY msgid DESC LIMIT 10;'' The three most common causes of unwanted mess
- Total Rebuild of Database
- atabase - Restart VPOP3 The process may take 5-10 minutes, or more depending on the size of your da
- Setting up VPOP3 to work with Microsoft Exchange
- Exchange you are using (5.5, 2000, 2003, 2007, 2010 or any later version), but the relevant settings
