Fulltext results:
- Error Messages
- *[[421 4.3.2 VPOP3 Too many connections from your IP address - try later]] *[[450 4.3.2 Content Filt... ] *[[550 5.7.1 Relaying not allowed! Bad sender IP address]] *[[550 5.7.1 Recipient Prohibited (x)... - text 550 5.7.1 Relaying not allowed! Bad sender IP address]] *[[Exceptions]] *[[LAN Forward Warn
- How To: Move VPOP3
- stalled_new_router_and_now_nothing_works|Changing IP address of VPOP3 server]] * [[https://support.p
- Move VPOP3 Version 3 or 4 to a new PC
- may will need to specify the database server TCP/IP port in the pg_restore command, as version 5 and
- How To Move VPOP3 Version 2 to a New PC
- tall those on the new PC as well If the new PC's IP address is different from the old PC's address, y... new mail server. You may also need to check the ''IP Address to Bind'' to setting on the ''Services ->
- PostgreSQL Replication
- ake of this article, we will have a Master PC, on IP address 192.168.1.10, a Slave PC on IP address 192.168.1.20, and a file share at \\192.168.1.10\pgsql... OP3 service on the Slave PC - Either change the IP address on the Slave PC to match that which was u... ocal DNS server to point email clients at the new IP address, or change all the email account settings
- Setting up an iPhone/iPad/iPod Touch
- r details - The Host Name is the the external IP address of your office network which is mapped th
- Accepting Incoming SMTP through a router
- r to allow inbound connections on port 25 for the IP address of the mail server. Your ISP should be able to tell you what IP address they have assigned as the address of your... have specified that your mail server should be on IP address ''123.123.123.123'', you would need to have something like: interface BRI0 ip access-group 110 in ! access-list 110 permit
- Timeout problems downloading/uploading messages with attachments
- but they may also be associated with Windows TCP/IP or dial-up adapter issues. You may not have probl... talled. These programs will process all email TCP/IP connections and scan the messages at that point. ... llowing settings one at a time: * Disable TCP/IP Nagle Algorithm * Set the 'TCP/IP' block sizes to 512 bytes * Set the 'Winsock Buffer' sizes
- How to make VPOP3 re-download POP3 messages from the ISP
- and you will see something like: http:/ /<server IP address>:5108/admin/index.html#connectors_206 Su
- 550 5.7.1 Relaying not allowed! Bad sender IP address
- ======550 5.7.1 Relaying not allowed! Bad sender IP address====== This SMTP error message means that ... ase, you need to go to Services -> SMTP Server -> IP Access Restrictions, and check that the required ... ration to make sure that it is using the internal IP address of the VPOP3 server. Some routers have a ... Reflection]] which allows you to use the external IP address from inside the network. That is OK, but
- Remote Access to VPOP3 without a permanent Internet connection
- service and configure this to allow incoming TCP/IP connections. If the Remote Access Server is runn
- VPOP3 Server Access Not Allowed
- VPOP3, then this means that the relevant server's IP Access Restrictions defined in VPOP3 do not allow... access from your client computer. To change the IP Access Restrictions, go to the **Services** page ... d click on the relevant service. Then go to the **IP Access Restrictions** tab. In the access restri... === Very early versions of VPOP3 did not have any IP access restrictions capability because they were
- Allow Remote Access to VPOP3 Mailboxes
- -> Webmail**, as appropriate). Then, go to the **IP Access Restrictions** tab. Press the **Add** butt... -> Webmail**, as appropriate). Then, go to the **IP Access Restrictions** tab. Press the **Add New Re... nyone with a valid username and password from any IP address - you may want to [[VPOP3 Access Security... t to the Internet, and use your external Internet IP address assigned by your ISP. If your office has
- 421 4.3.2 VPOP3 Too many connections from your IP address - try later
- ===421 4.3.2 VPOP3 Too many connections from your IP address - try later====== If you see this error m... ected too many simultaneous connections from your IP address. This would usually happen if the sender... ns are incoming or not by looking at the sender's IP address. If this is allowed by the IP Access Restrictions with 'No Auth' specified, then it is treate
- How to Access VPOP3's WebMail
- browser and, in the address box type **%%http://<ip address of VPOP3>:5108%%** Then, enter the relev