Fulltext results:
- Configuring iCal on Mac OSX to connect to VPOP3's CalDAV service
- llowing instructions are for Mac OS X v10.7.5 but should work with similar versions. We have **not** been... nt Settings** page, press **Create** again. You should, hopefully, eventually end up at a page called **... - leave this as **None** * **User Name** - this should be completed with your VPOP3 user name, but check it * **Password** - this should be completed with your VPOP3 password * **Serve
- Repairing corrupted database
- se backup and the time when you restore it, so it should be done as soon as possible to avoid excessive da... e able to recover anything. Before you start you should: - stop the VPOP3 service - stop the VPOP3DB ... ice yet. Once you have repaired the database you should ideally perform a manual database backup & restor... maged relation is an index, so a database reindex should fix the problem. If it is 'r' then it is a normal
- Accepting Incoming SMTP through a router
- for the IP address of the mail server. Your ISP should be able to tell you what IP address they have ass... igned as the address of your mail server, and you should make sure that this is the address you use. Beca... uring them we cannot give the details of how this should be done. You should contact the suppliers of the router who should be able to do this. Note that most ro
- Data stream contained NUL character
- th value 0) are not allowed in email messages and should not be transmitted over POP3, SMTP or IMAP4 excep... ay that these characters are not allowed, so they should not be passed on. For incoming SMTP, VPOP3 will ... sage that contains a NUL character and the sender should receive a delivery failure report. This is the co... em out, as the problem is coming from there (they should either reject the message, or recode the message
- How to Restore a backup of VPOP3
- into the location where you restored VPOP3. This should reinstall the PostgreSQL database system. //Do no... ts of errors, then there may be a problem and you should contact support@pscs.co.uk. - Start VPOP3 ====... into the location where you restored VPOP3. This should reinstall the PostgreSQL database system. //Do no... ts of errors, then there may be a problem and you should contact support@pscs.co.uk. - Start VPOP3 ====
- Upgrading VPOP3 to version 8.x from v7 or earlier
- ==== When upgrading from VPOP3 v5 or later, this should be a relatively quick process, usually taking no ... he pg_upgrade process will be rolled back and you should be able to continue using the old version of VPOP3. You should then contact support@pscs.co.uk with details of t... d. In all other cases, the upgrade from v2 to v8 should be straightforward because VPOP3 will automatical
- Move VPOP3 Version 5 (or later) to a new PC
- installer asks you to enter your licence key, you should enter it here. If you do not enter it, make sure ... ts of errors, then there may be a problem and you should contact support@pscs.co.uk. ====If you had previ... correct =====Check Settings on new PC===== You should check for common potential issues on the new PC -... ings, and you do not want VPOP3 to run on it, you should disable VPOP3 on it. If you don't do this, you m
- 1069 or 7000 Login Failure error when starting VPOP3DB service
- ng: * User must change password at next logon (should be unchecked) * Password never expires (should be checked) =====Windows desktop, standalone server or ... g: * User must change password at next logon (should be unchecked) * Password never expires (should be checked)
- Setting up VPOP3 to work with Exchange 2003
- y incoming mail directly to Exchange Server. You should first of all set up VPOP3 to send and receive Int... using the wildcard will forward all addresses, so should only be used if you have a VPOP3 licence which su... using the wildcard will forward all addresses, so should only be used if you have a VPOP3 licence which su... configuration. Unfortunately we cannot write the exact entries that you should use in our help documents.
- How To Upgrade VPOP3 to version 5 or later
- ill be the minimum amount of extra free space you should have over what you are already using (if you are ... e the minimum amount of extra free disk space you should have. If you move the backups to a different loc... the VPOP3 directory. =====Downgrading===== You should not downgrade from one version of VPOP3 to an ear... sly upgraded to version 5. PSCS technical support should be able to resolve any database inconsistency pro
- How to Install VPOP3
- can cause the database to be corrupted. * You should definitely disable write-back caching if your VPO... reboot, possibly corrupting the database. * You should consider disabling write-back caching if your VPO... ower fails, you may corrupt the database. * You should be OK if you have a disk controller with a batter... l) as part of our free email support service. You should contact your antivirus/firewall vendor for help,
- VPOP3 - SMTP Client Problem
- bnormal circumstances. Following this text there should be a further description of the specific error wh... ir SMTP server. In this case, the first thing you should do should be to contact the ISP to see if they can tell you why their server thinks that you shouldn't be... e allowed to send mail through their server, they should be able to help you change your setup to make thi
- How To Move VPOP3 Version 2 to a New PC
- es to version 1.x) To move VPOP3 to a new PC you should go through the following steps: - Copy the VPO... ny VPOP3 addins (eg the VPOP3 FaxServer etc), you should reinstall those on the new PC as well If the new... tep (3a) in the sequence above. In this case, you should also check for any possible issues with Windows/o
- Some PCs cannot access VPOP3 when VPOP3 is connected to the Internet
- and ''192.168.2.254''. On the VPOP3 computer you should go to a DOS prompt and run: ROUTE ADD 192.168.... VPOP3 is running on a Windows 95/98 computer, you should put this in a batch file and run it from the Star... roup. If VPOP3 is running on Windows NT/2000, you should add a ''-P''' after the ''ROUTE'' and before the
- Configuring Calendar on iOS
- OP3 v6.3 may cause authentication problems - this should be fixed in VPOP3 v6.4. - In iOS go to **Setti... S. Press **OK** at this popup window. - There should now be an **Advanced Settings** button you can pr... f you now go to the **Calendars** app in iOS, you should see the VPOP3 calendars listed when you press the
