Fulltext results:
- SMTP Server Lua Scripting @reference
- d return a text string which can be used to block connections. This text string is used as the 'welcome' respo
- Error Messages @how_to
- scanner problem!]] *[[421 4.3.2 VPOP3 Too many connections from your IP address - try later]] *[[450 4.3.2
- Mail Connectors @reference
- other mail servers. This page lets you set: * [[Connections]] - how VPOP3 connects to the outside world * [
- POP3 Server -> General Tab @reference
- P3 what sort of encryption should be used on POP3 connections between email clients and VPOP3. This option is o
- POP3 Server @reference
- ith different settings for instance, to allow SSL connections for local users using the older **POP3S** (port 9... utlook Express), while still allowing unencrypted connections or the newer TLS encryption for incoming SMTP fee
- 450 4.3.2 Content Filter Timeout @how_to
- slow and/or you have allowed too many concurrent connections. Check the disk fragmentation, also use Task Mana
- How To Encrypt Sessions @how_to
- also support this for backward compatibility. SSL connections are usually done on a different TCP port from nor... g POP3 is on port 110, POP3S is on port 995). SSL connections are encrypted from the start, so any connections on that port MUST be encrypted. - STARTTLS - (this is call... thod, but recent versions of Outlook do. STARTTLS connections are carried out on the same port as normal (eg po
- Mail Connectors -> Connector Schedule @reference
- , VPOP3 will immediately connect to the 'default' Connections If you create a file called **CONNECT.PAUSE** in... v6.1 and later), VPOP3 will not perform scheduled connections. This can be useful if you wish to start VPOP3 'p... ule is enabled or not. ====Caution with multiple connections===== Note that if you have multiple connections configured, then each time the scheduler 'triggers', all the c
- SMTP -> Load Limiting tab @reference
- ions]]. This does not affect internal users' SMTP connections to VPOP3, only incoming sessions. If you set thi
- Remote Access to VPOP3 without a permanent Internet connection @how_to
- rvice and configure this to allow incoming TCP/IP connections. If the Remote Access Server is running on the V... this by going to ''Settings - Network and Dial-up connections - Make New Connection''. Then choose ''Accept Incoming Connections'' and set it up appropriately. If the ''Remote A
- FATAL: connection limit exceeded for non-superusers @fatal
- s====== This error means that there are too many connections to the PostgreSQL database server. =====VPOP3 ha... reSQL database, then you can reduce the number of connections that VPOP3 will make to the database at once. Thi... s at **Settings -> Database -> Connection**, "Max Connections". The default value here is 50 Also, there's a r... ses'. The default of this is 80. If the number of connections has reached the normal 'Max Connections' limit, a
- Mail Sender Advanced Settings @reference
- isk is full, greylisting, etc. Network errors (eg connections dropping or timing out) are also treated as this
- Mail Connectors -> Mail Senders -> SMTP Direct @reference
- business class Internet connection (home Internet connections are more often blocked by receiving mail servers)
- SMTP Direct Sender Settings @reference
- mited because of the large number of simultaneous connections. If you set it too low, then there will be wasted
- SMTP Server -> IDS/IPS @reference
- r Block list is used to tell VPOP3 never to block connections from the specified addresses. This can be useful