Fulltext results:
- We installed a new router and now nothing works @how_to
- s====== If you installed a new router on your network and left it at the default settings, you may find that VPOP3 doesn't seem to work afterwards. This is because it may be that the new router allocates new IP addresses on your network. Note that this topic can be quite complicated, ... at address (make sure it is still in the same 'network address range' as the router, or it won't work).
- 550 5.7.1 Relaying not allowed! Bad sender IP address @how_to
- rying to send messages from outside your local network, and you have not configured VPOP3 to allow this.... allow relaying of mail from outside your local network. If you are having this problem for people inside your local network then it may be because someone has changed the default restrictions, or you may have a complex network with multiple subnets defined. In this case, you
- Autoresponder Commands @reference
- this specifies that the autoresponder should only work during the specified dates. See below for more de... ictions to indicate when the autoresponder should work. You can specify multiple restrictions in one <Va... pecify a single date, the autoresponder will only work on that day. Otherwise you can specify <From Date>"-"<To Date> and it will work between the two dates, eg **<Valid:1/2/2010-10/2/
- How To Setup VPOP3 Service Security @how_to
- edia.org/wiki/CIDR_notation|CIDR format]], as <network address>/<mask>, eg 192.168.0.0/24) or all addres... routers) - create an **ALLOW** rule for each network which the VPOP3 computer is directly connected to... r address) * ALLOW 192.168.1.0/24 (the local network) * ALLOW 127.0.0.0/8 (the loopback addresses) If there are multiple network adapters (or multiple IP addresses bound to a sin
- VPOP3 Server Access Not Allowed @how_to
- strictions to sensible settings for your local network, but you may need to manually change them if you want to allow access from outside your local network. See [[VPOP3 Access Security]] for more informat... rictions are specified as text. Each line is a network address and subnet mask, eg: 192.168.0.0 255.2... - 172.16.x.y - 192.168.x.y If your local network has a different network range, do not install the
- Incoming SMTP Feed @how_to
- ng via a POP3 mailbox: * Incoming BCCd messages work correctly without any effort * Incoming mail ar... t IP address on the Internet for incoming SMTP to work. Other mail servers have to know where to send yo... if it may go down for a few minutes, but it won't work with a dial-up connection unless you are almost p... due to differences in the way the two mechanisms work - for instance you cannot have VPOP3 ask you if y
- Timeout problems downloading/uploading messages with attachments @how_to
- - Check for driver/firmware updates for your network card. If possible try changing the network card in the VPOP3 server for one of a different model/make. The rest of the network may work OK, but we see many cases where changing the network card will fix the problem even if it seem
- How To Allow Mail Relay Through VPOP3 @how_to
- dress of the computer which is connected to it to work out whether that user can send outgoing messages.... ending outgoing email, and anyone on the local network will be able to send outgoing mail. Now you have... ted' networks, eg other subnets on your office network, you may also choose to check the **Allow Unauth*... you may check the **No Auth** box next to the network address for your local network. This will allow y
- ping_test @how_to
- ''ping'' command is a useful way of diagnosing network problems. It's similar to the sonar ping in a sub... then everything would seem to be OK with your network configuration - you've got another problem. * If ''ping %%www.pscs.co.uk%%'' didn't work, then try typing ''ping 195.112.5.192''. You shou... tion - ask your ISP for help. * If that doesn't work, then you've got a problem elsewhere in your netw
- Remote Access to VPOP3 without a permanent Internet connection @how_to
- the VPOP3 computer or another computer on the network. This only works reliably if the dial-inserver is... u need to install the ''Remote Access Server'' network service and configure this to allow incoming TCP/... will need to allow inward access to the whole network. ===Dial-in server using Windows 2000 (Professio... Windows 2000. Do this by going to ''Settings - Network and Dial-up connections - Make New Connection''.
- RBL Checking not working in VPOP3 Enterprise @how_to
- ere are a few reasons why the RBL feature may not work. * if you don't get your mail via incoming SMTP, then RBL can't work * if you get your incoming mail feed via a thir... r ISP or a mail filtering company, then RBL can't work * if you get your incoming mail feed via a prox... y server, eg a security appliance, then RBL can't work * if the VPOP3 PC isn't configured to use a wor
- Allow Remote Access to VPOP3 Mailboxes @how_to
- s to anyone connecting from outside your local network, so you need to tell VPOP3 to allow access from a... tatic IP address and want computers to be able to work from both inside and outside your network, you MAY be able to use the external IP address in both cases... router supports [[http://en.wikipedia.org/wiki/Network_address_translation#NAT_loopback|NAT loopback]],
- PostgreSQL Replication @how_to
- ervices are running as have full access to the network share. The network share can be on either of the computers involved in the replication, or on a totally... re using the UNC path, mapped drives will //not// work). VPOP3 is installed in c:\vpop3 on both PCs Bot... op3, etc), or settings relating to paths will not work if you have to fail over to the Slave PC. Alterna
- Which versions of Windows will VPOP3 run on? @faq
- ows is not listed above does not mean it will not work on it, just that it hasn't been tested on it. It should work on any 32 or 64 bit version of Windows, from Wind... ows is not listed above does not mean it will not work on it, just that it hasn't been tested on it. It should work on any 32 or 64 bit version of Windows, from Wind
- VPOP3 Is Responding Slowly @how_to
- itself. If this is quick, then that suggests a network issue or something on the user's PC. Note that some network problems will cause network traffic to be retried, rather than just failing outright, so will appear as... 'pooled storage' area (drive D:). VPOP3 does not work reliably if installed on this drive. It either ne
