Fulltext results:
- We installed a new router and now nothing works @how_to
- ======We installed a new router and now nothing works====== If you installed a new router on your network and left it at the default settings, you may find that VPOP3 doesn't seem to work afterwards. This is because it may be that the new router allocates new IP addresses on your network. Note that this topic can be quite complicated,
- 550 5.7.1 Relaying not allowed! Bad sender IP address @how_to
- rying to send messages from outside your local network, and you have not configured VPOP3 to allow this.... allow relaying of mail from outside your local network. If you are having this problem for people inside your local network then it may be because someone has changed the default restrictions, or you may have a complex network with multiple subnets defined. In this case, you
- How To Setup VPOP3 Service Security @how_to
- edia.org/wiki/CIDR_notation|CIDR format]], as <network address>/<mask>, eg 192.168.0.0/24) or all addres... routers) - create an **ALLOW** rule for each network which the VPOP3 computer is directly connected to... r address) * ALLOW 192.168.1.0/24 (the local network) * ALLOW 127.0.0.0/8 (the loopback addresses) If there are multiple network adapters (or multiple IP addresses bound to a sin
- ping_test @how_to
- ''ping'' command is a useful way of diagnosing network problems. It's similar to the sonar ping in a sub... 12.5.192: bytes=32 time=391ms TTL=55 * If that works, then type ''ping >your ISP's mail server<'' (e.... then everything would seem to be OK with your network configuration - you've got another problem. * If ''ping %%www.pscs.co.uk%%'' didn't work, then try typing ''ping 195.112.5.192''. You shou
- VPOP3 Server Access Not Allowed @how_to
- e access restrictions you should specify which networks have access to your computer. The **Default for ... strictions to sensible settings for your local network, but you may need to manually change them if you want to allow access from outside your local network. See [[VPOP3 Access Security]] for more informat... rictions are specified as text. Each line is a network address and subnet mask, eg: 192.168.0.0 255.2
- RBL Checking not working in VPOP3 Enterprise @how_to
- ======RBL Checking not working in VPOP3 Enterprise====== VPOP3 Enterprise has an RBL checking feature w... altime Blacklist Rules If it does not seem to be working properly, there are a few reasons why the RBL feature may not work. * if you don't get your mail via incoming SMTP, then RBL can't work * if you get your incoming mail feed via a thir
- Autoresponder Commands @reference
- this specifies that the autoresponder should only work during the specified dates. See below for more de... ictions to indicate when the autoresponder should work. You can specify multiple restrictions in one <Va... pecify a single date, the autoresponder will only work on that day. Otherwise you can specify <From Date>"-"<To Date> and it will work between the two dates, eg **<Valid:1/2/2010-10/2/
- Remote Access to VPOP3 without a permanent Internet connection @how_to
- the VPOP3 computer or another computer on the network. This only works reliably if the dial-inserver is running Windows NT, Windows 2000 or later versions. ===Dial-in server using Windows NT (Workstation or Server)=== You need to install the ''Remote Access Server'' network service and configure this to allow incoming TCP/
- Timeout problems downloading/uploading messages with attachments @how_to
- - Check for driver/firmware updates for your network card. If possible try changing the network card in the VPOP3 server for one of a different model/make. The rest of the network may work OK, but we see many cases where changing the network card will fix the problem even if it seem
- How To Allow Mail Relay Through VPOP3 @how_to
- dress of the computer which is connected to it to work out whether that user can send outgoing messages.... remote users can log on before sending mail. This works fine as long as the remote users are using email... ending outgoing email, and anyone on the local network will be able to send outgoing mail. Now you have... icating. If you have added any other 'trusted' networks, eg other subnets on your office network, you ma
- Incoming SMTP Feed @how_to
- ng via a POP3 mailbox: * Incoming BCCd messages work correctly without any effort * Incoming mail ar... t IP address on the Internet for incoming SMTP to work. Other mail servers have to know where to send yo... if it may go down for a few minutes, but it won't work with a dial-up connection unless you are almost p... due to differences in the way the two mechanisms work - for instance you cannot have VPOP3 ask you if y
- "How To" Articles @how_to
- ke VPOP3 redownload messages from ISP]] * [[Not Working as Expected]] * [[Lost password|Lost/forgott... word]] * [[Installed new router and now nothing works]] * [[Database Issues]] * [[Seeing where a m... starting properly]] * [[Licence activation not working]] =====Email Client Configuration===== * [[G... standby VPOP3 server]] * [[Setting up VPOP3 to work with Microsoft Exchange]] * [[Internationalisat
- How to upgrade VPOP3 to version 7 or later from version 6 or earlier @how_to
- ked EOL (End-of-life) in September 2016. It still works fine, so there will be no problems continuing to... end it. We have tested the upgrade process and it works OK during testing, but we will not be liable for... checker * Sophos SAV Interface (SAVI) does not work =====Problems during upgrade===== We recommend t... folder has been renamed so the database will not work. To put back the old database, you need to renam
- Some PCs cannot access VPOP3 when VPOP3 is connected to the Internet @how_to
- when you have multiple TCP/IP subnets on your network. The computers which are on different subnets fro... p connection). Whenever VPOP3 is offline, it will work correctly. This error is actually a TCP/IP routi... uter experiencing this problem. The ''PING'' will work when the VPOP3 computer is not connected to the Internet, but not work when it is. The fix for this is to correctly set
- Allow Remote Access to VPOP3 Mailboxes @how_to
- s to anyone connecting from outside your local network, so you need to tell VPOP3 to allow access from a... tatic IP address and want computers to be able to work from both inside and outside your network, you MAY be able to use the external IP address in both cases... router supports [[http://en.wikipedia.org/wiki/Network_address_translation#NAT_loopback|NAT loopback]],
