Fulltext results:
- We installed a new router and now nothing works @how_to
- orks====== If you installed a new router on your network and left it at the default settings, you may find... the new router allocates new IP addresses on your network. Note that this topic can be quite complicated, ... that address (make sure it is still in the same 'network address range' as the router, or it won't work). ... **Quarantine Server Address** setting. =====New Network Address===== Sometimes the router may allocate a
- How To Setup VPOP3 Service Security @how_to
- kipedia.org/wiki/CIDR_notation|CIDR format]], as <network address>/<mask>, eg 192.168.0.0/24) or all addres... s (routers) - create an **ALLOW** rule for each network which the VPOP3 computer is directly connected to... uter address) * ALLOW 192.168.1.0/24 (the local network) * ALLOW 127.0.0.0/8 (the loopback addresses) If there are multiple network adapters (or multiple IP addresses bound to a sin
- 550 5.7.1 Relaying not allowed! Bad sender IP address @how_to
- s trying to send messages from outside your local network, and you have not configured VPOP3 to allow this.... to allow relaying of mail from outside your local network. If you are having this problem for people inside your local network then it may be because someone has changed the default restrictions, or you may have a complex network with multiple subnets defined. In this case, you
- VPOP3 Server Access Not Allowed @how_to
- restrictions to sensible settings for your local network, but you may need to manually change them if you want to allow access from outside your local network. See [[VPOP3 Access Security]] for more informat... estrictions are specified as text. Each line is a network address and subnet mask, eg: 192.168.0.0 255.2... y.z - 172.16.x.y - 192.168.x.y If your local network has a different network range, do not install the
- Remote Access to VPOP3 without a permanent Internet connection @how_to
- nto the VPOP3 computer or another computer on the network. This only works reliably if the dial-inserver is... You need to install the ''Remote Access Server'' network service and configure this to allow incoming TCP/... you will need to allow inward access to the whole network. ===Dial-in server using Windows 2000 (Professio... of Windows 2000. Do this by going to ''Settings - Network and Dial-up connections - Make New Connection''.
- Timeout problems downloading/uploading messages with attachments @how_to
- s. - Check for driver/firmware updates for your network card. If possible try changing the network card in the VPOP3 server for one of a different model/make. The rest of the network may work OK, but we see many cases where changing the network card will fix the problem even if it seems to be
- Connections @reference
- rts up to 10 **Connections**, which can be either network connections or Dial-Up connections (using a modem... ave a single **Connection** which is set to **Use network for Connection**. This is the case when VPOP3 con... ions defined ====Connection Method==== * **Use network for Connection**. In this case, VPOP3 assumes the... just tries to access the remote servers over the network. Nowadays, most people have routers, so this is t
- How To Allow Mail Relay Through VPOP3 @how_to
- m sending outgoing email, and anyone on the local network will be able to send outgoing mail. Now you have... rusted' networks, eg other subnets on your office network, you may also choose to check the **Allow Unauth*... ay, you may check the **No Auth** box next to the network address for your local network. This will allow your local users to send mail without authenticating. (Thi
- Settings -> Attachment Processing @reference
- line of defence, in case something gets onto the network and tries to send messages with certain types of ... you would normally pick a shared directory on the network and enter the [[wp>Path_(computing)#Uniform_Namin... to access the file, provided that the appropriate network permissions have been set.// The attachments dir
- ping_test @how_to
- he ''ping'' command is a useful way of diagnosing network problems. It's similar to the sonar ping in a sub... ve, then everything would seem to be OK with your network configuration - you've got another problem. * I... here in your networking configuration - again, ask your ISP for help. {{tag>ping test diagnostic network}}
- Exchange 2007 @how_to
- nnector, and choose **Properties**. - Go to the Network tab. In the top half of this page, called **Local... sk) and press **OK**. Press **Next** - On the **Network Settings** page, select **Route mail through the ... nector, and choose **Properties** - Go to the **Network** tab - Select **Route mail through the followi
- Archiving not saving messages on a shared drive @how_to
- the archive store directory is a drive on another network computer, then there are a few possible difficult... ing has the appropriate permissions to the shared network drive. This usually requires you to go to Admin T... user, then give that user permissions on the shared network drive. {{tag>archive permission shared_drive}}
- VPOP3 Is Responding Slowly @how_to
- er itself. If this is quick, then that suggests a network issue or something on the user's PC. Note that some network problems will cause network traffic to be retried, rather than just failing outright, so will appear as a
- Allow Remote Access to VPOP3 Mailboxes @how_to
- cess to anyone connecting from outside your local network, so you need to tell VPOP3 to allow access from a... be able to work from both inside and outside your network, you MAY be able to use the external IP address i... ur router supports [[http://en.wikipedia.org/wiki/Network_address_translation#NAT_loopback|NAT loopback]],
- Socket Error 10060 - Operation Timed Out @how_to
- ry increasing the ''Utilities -> Misc Settings -> Network Tweaks -> Connect Attempt Count'' or ''Utilities -> Misc Settings -> Network Tweaks -> Connect Retry Time'' settings), or that... be changed on the ''Utilities -> Misc Settings -> Network Tweaks'' page in the VPOP3 settings. See also: [
