User Tools

Site Tools


how_to:vpop3db_postgresql_service_not_starting

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
how_to:vpop3db_postgresql_service_not_starting [2015/11/27 17:30] – [no pg_hba.conf entry for host ::1, user vpop3, database vpop3] paulhow_to:vpop3db_postgresql_service_not_starting [2018/11/14 10:45] (current) – external edit 127.0.0.1
Line 1: Line 1:
-======VPOP3DB Service not starting====== +[[https://helpdesk.pscs.co.uk/865133-VPOP3DB-Service-not-starting]]
-VPOP3DB is the current name of the VPOP3 instance of PostgreSQL. Earlier versions of VPOP3 used the name 'PostgreSQL' or 'PostgreSQL-VPOP3'+
- +
-  * [[1069 - Login Failure - error when starting VPOP3DB service]] +
-  * [[Timeout while VPOP3DB is starting]] +
- +
-If the PostgreSQL service doesn't start, or starts and immediately stops, there are a couple of things you can do: +
- +
-  * Look in the Windows //Application//event log for entries relating to PostgreSQLSee below for possible errors in the event log +
-  * Look in the VPOP3\pgsql\data\pg_log folder for a log file created at the time when you started VPOP3If that is there, you can read that (using Notepad) and see if it reports any problems with files or 'relations'If so, it might be a problem with a damaged database. See below for other possible error messages in the PostgreSQL log files. +
-  * Check the Processes list (for all users) in Windows' Task Manager and end any 'postgres.exe' processes which are owned by 'vpop3postgres' and try again. +
- +
-=====Event Viewer Entries===== +
-In the Windows Event Viewer, view the //Application// event log, then look for **Error** entries for the **PostgreSQL** source. +
- +
-Depending on your installation, the events may all be displayed as something like: +
-  The description for Event ID xxxx from source PostgreSQL cannot be found. Either the component that raises this event is not installed on your local computer.... +
-   +
-If that's the case, don't worry, just look lower down in the event message. It will say something like  +
-  The following information was included with the event +
-   +
-It is that information you need to see. Some possible event messages we have seen are: +
-   +
-====Timed out waiting for server startup==== +
-This can happen if the PC previously crashed, or there was a power failure. When the PC restarts, it can take some time for the database server to run its recovery process. This may take longer than the time allowed by the database service controller, especially if the PC is busy doing other recovery tasks. +
- +
-To solve this, go to Windows TaskManager (Ctrl-Alt-Del - choose TaskManager), then go to the **Processes** tab and click **Show processes for all users**. Sort by **Image Name**, and **End Process** on all the **postgres.exe** processes. Once those are all ended, then you should be able to start the **VPOP3DB** service manually. +
-   +
-====pg_ctl: this data directory appears to be running a pre-existing postmaster==== +
-If this is the case, then usually it means that a previous attempt to start PostgreSQL was made, but it timed out or something, and is now in a 'partially' running state.  +
- +
-To solve this, go to Windows TaskManager (Ctrl-Alt-Del - choose TaskManager), then go to the **Processes** tab and click **Show processes for all users**. Sort by **Image Name**, and **End Process** on all the **postgres.exe** processes. Once those are all ended, then you should be able to start the **VPOP3DB** service manually. +
- +
-====Postmaster.pid exists==== +
-If there is an event saying ''FATAL: lock file "postmaster.pid" already exists'', then this means that that file exists in the VPOP3\pgsql\data folder. Usually this should be deleted when PostgreSQL closes down when the computer is shut down or restarted. +
- +
-First check that the database software is not running in a partial state. Go to Windows TaskManager (Ctrl-Alt-Del - choose TaskManager), then go to the **Processes** tab and click **Show processes for all users**. Sort by **Image Name**, and **End Process** on all the **postgres.exe** processes. Once those are all ended, then you should be able to start the **VPOP3DB** service manually. +
- +
-If the database software is not running, you can manually delete the VPOP3\pgsql\data\postmaster.pid file before restarting the VPOP3 service. +
- +
-====pg_ctl: could not find postgres program executable==== +
-We have seen this happen if a virus scanner decides to delete part of the PostgreSQL installation, or if the installation failed for some reason. +
- +
-If you are using VPOP3 v5 or v6, the easiest thing to do is to manually reinstall the PostgreSQL part of the installation. To do this, open a command prompt and go to the VPOP3 installation directory. Then run:\\ +
-bsdtar -xvf pgsql.tbz +
- +
-If you are using VPOP3 v3 or v4, it is more difficult. Possibly the best thing to do is to install a temporary copy of the same version of VPOP3 on another PC, then copy the VPOP3\pgsql\bin, VPOP3\pgsql\lib and VPOP3\pgsql\share folders from that temporary installation to your VPOP3 PC. +
-====PostgreSQL Log Entries==== +
-If you get **FATAL** or **PANIC** entries in the PostgreSQL log files (in **VPOP3\pgsql\data\pg_log**) then they may give more information about why PostgreSQL could not start. Some log entries we have come across are below. +
- +
-====no pg_hba.conf entry for host "::1", user "postgres", database "postgres"==== +
-====no pg_hba.conf entry for host "::1", user "vpop3", database "vpop3"==== +
-This usually happens if the PC where VPOP3 is installed used to only have IPv4 installed, and has now had IPv6 added. The PostgreSQL configuration needs altering to support IPv6. +
- +
-Usually this only happens on Windows XP - earlier versions of Windows do not support IPv6, and later versions support IPv6 by default. Windows XP needs to have [[http://support.microsoft.com/kb/2478747|IPv6 manually installed]] +
- +
-To fix this problem, go to the **VPOP3\pgsql\data** folder on the server and edit the **pg_hba.conf** file using a plain text editor such as Notepad. +
- +
-Near the bottom of that file you should see a section saying +
-<code> +
-# TYPE  DATABASE        USER            CIDR-ADDRESS            METHOD +
- +
-# IPv4 local connections: +
-host    all             all             127.0.0.1/32            md5 +
-# IPv6 local connections: +
-#host    all             all             ::1/128                 md5 +
-</code> +
- +
-Edit the last line to remove the # from the start, so it now says +
- +
-<code># TYPE  DATABASE        USER            CIDR-ADDRESS            METHOD +
- +
-# IPv4 local connections: +
-host    all             all             127.0.0.1/32            md5 +
-# IPv6 local connections: +
-host    all             all             ::1/128                 md5 +
-</code> +
- +
-In some cases the last two lines may not exist, in which case you can simply copy those lines from the example above and paste them into your pg_hba.conf file +
- +
-You will then need to restart the VPOP3DB/PostgreSQL service in Windows. Note that sometimes PostgreSQL cannot close down properly, and there will be unwanted 'postgres.exe' processes visible in Windows TaskManager on the Processes tab. If so, then end those processes manually, before restarting the service. +
- +
-====Shared memory problems==== +
-The VPOP3 installer attempts to configure the database server to sensible defaults for the computer on which VPOP3 is running. Sometimes this may be wrong because of changes to the server configuration or other things. Most of the settings the installer could get wrong will not usually cause serious problems, but if the installer has overestimated the amount of memory available, then this could cause the VPOP3DB service to fail to start. +
- +
-To check, this look in the ''VPOP3\pgsql\data\vpop3db.conf'' file (in older versions of VPOP3, this file may not exist - in that case, look in the ''VPOP3\pgsql\data\postgresql.conf'' file instead. There will be a line saying something like: +
- +
-  shared_buffers=1024MB +
-   +
-This tells the database service how much memory it can use for its built-in cache. If this number is too high, so that Windows cannot give this amount of memory to the database server, then the VPOP3DB service will not start. +
- +
-You can decrease the value, eg to ''shared_buffers=256MB'' and see if that will allow the VPOP3DB service to start correctly. If you wish, you may then increase the value gradually until it will not restart. +
- +
-Since the VPOP3 installation of the PostgreSQL database server is a 32 bit version, you should not increase the value of this over 1024MB, even if the computer has much more memory available. PostgreSQL takes advantage of Windows' disk caching, so the memory is not wasted. +
- +
-Do not set this value below about 32MB. The bigger it is, the faster the database server will be able to run, up to a maximum of about 1024MB. For computers with sufficient RAM (memory), then about 1/4 of the available RAM is a good starting point (within the above limits) - eg if the PC has 2GB of RAM, then 512MB is a sensible starting point. +
- +
-Increasing this so much that other programs start paging to disk will be counter-productive, so there always needs to be sufficient free memory for Windows to be happy, and preferably to have memory available for Windows' disk caching. +
- +
-=====Other things to try===== +
- +
-===Start service manually=== +
-You can also try starting the PostgreSQL service manually: +
- +
-  * For VPOP3 v3 and v4, from a command prompt, run "runas /user:postgres cmd" (password is "vla8Pi4cluwrouDiERiU"+
-  * For VPOP3 v5 and later, from a command prompt, run "runas /user:vpop3postgres cmd" (password is "Nc6ACboDt2jVL6"+
- +
-Then  +
-  c: +
-  cd \vpop3\pgsql\bin +
-  pg_ctl -D "C:\vpop3\pgsql\data" start  +
-   +
-(If your VPOP3 is installed in a different directory, change the above paths as appropriate) +
- +
-See what response you get to the pg_ctl command +
- +
-===Change Service user to 'LocalSystem'=== +
-Occasionally it won't start anyway. In this case, changing the VPOP3DB service Logon user to //Local System Account// will solve the problem (make sure that //Allow service to interact with desktop// is not checked). +
- +
-{{:how_to:vpop3dbservicelocalsystem.png|}} +
- +
-It is not installed this way by default because the 'LocalSystem' user has full permissions to the PC's files, whereas the //vpop3postgres// user only has access to the database files, but it should not be a big security risk as long as other basic security steps are taken. The default installation of the VPOP3DB service does not allow access to the database over the network, so it is low risk. +
- +
-===Reinstall PostgreSQL program files=== +
-It isn't unknown for a virus scanner or Internet security program (or a 'system restore', etc) to randomly delete the PostgreSQL program files/DLLs, which will cause the service to fail to start. +
- +
-In this case, in v6 or later you can manually replace all the PostgreSQL program files without having to reinstall or lose data. To do this, go to a command prompt in the VPOP3 installation directory and run: +
- +
-  bsdtar -xvf pgsql.tbz +
- +
-That should overwrite all the PostgreSQL program files/DLLs/etc without affecting the database.+
how_to/vpop3db_postgresql_service_not_starting.1448645439.txt.gz · Last modified: 2018/11/14 10:44 (external edit)