PSCS Wiki

SMTP Rule Example - restrict who can send to a local email address

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTP Rule Example - restrict who can send to a local email address If you have a local email address (a user, group or distribution list) and you want to restrict which email addresses can send messages to this address, you can use SMTP rules. There are a few ways you can configure the SMTP rules for this scenario.

Move VPOP3 Version 5 (or later) to a new PC

Anonymous (anonymous@undisclosed.example.com) — 2026-04-21T11:12:40+00:00

Move VPOP3 Version 5 (or later) to a new PC Moving VPOP3 Version 5 or later to a new PC is slightly different from moving earlier versions, because of the database system, which was introduced for version 3 and modified for version 5. The summary of steps is: * Stop VPOP3 on the original PC

Formatting Syntax

Anonymous (anonymous@undisclosed.example.com) — 2026-03-16T16:00:10+00:00

Formatting Syntax DokuWiki supports some simple markup language, which tries to make the datafiles to be as readable as possible. This page contains all possible syntax you may use when editing the pages. Simply have a look at the source of this page by pressing

How To Allow Mail Relay Through VPOP3

Anonymous (anonymous@undisclosed.example.com) — 2025-05-21T07:57:18+00:00

How To Allow Mail Relay Through VPOP3 If you are allowing remote access into VPOP3 to collect mail then you may also want those remote users to be able to send their outgoing mail through VPOP3 as well. This is more complex than allowing users to collect mail, because, by default, SMTP connections are not authenticated. This means that when someone tries to send a message through VPOP3, VPOP3 doesn't know who that user is. This can cause a problem if unauthorised users try to send mail through…

How to download VPOP3

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to download VPOP3 To download VPOP3 go to www.pscs.co.uk and click on Download/Try underneath VPOP3 Email Server (1) If you are wanting to download a previous version of VPOP3, click on the download previous versions link (2) Full Downloads If you are wanting to download the current version of VPOP3, click on the appropriate link (3).

Multiple VPOP3 icons in the taskbar

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Multiple VPOP3 icons in the taskbar If you reinstall VPOP3 it is possible that you may end up with two VPOP3 Status Monitor icons in the task tray. This doesn't mean that two copies of VPOP3 are running, just that two copies of the VPOP3 Status Monitor are running.

Custom filtering incoming mail

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Custom filtering incoming mail If you want to filter incoming mail using custom rules there are a few ways of doing this, depending on your exact requirements. * Download rules - if your incoming mail is via POP3 collection, you want to filter on headers, size etc (not contents)

How to Forward Messages to an External Address

Anonymous (anonymous@undisclosed.example.com) — 2025-08-18T15:13:06+00:00

How to Forward Messages to an External Address There are two possible methods to forward messages to an external address: * Use this method if it is for a person who might want to receive their email whilst in the office and/or get the mail sent to an external address.

How to move messages between users

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to move messages between users There are several ways to do this, depending on your exact needs Via Administrator Console You can view a user's 'Inbox' messages by clicking on the message count on the Users list, then select the messages, choose the target user, and press the

How to configure Mozilla Thunderbird

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to configure Mozilla Thunderbird This article won't show you all the possible settings in Thunderbird, because there are so many. Thunderbird is one of the most powerful & flexible email clients available at the time of writing, especially if you use IMAP4 (with VPOP3 Enterprise).

Move VPOP3 Version 3 or 4 to a new PC

Anonymous (anonymous@undisclosed.example.com) — 2019-11-12T16:09:08+00:00

Move VPOP3 Version 3 or 4 to a new PC Moving VPOP3 Version 3 or 4 to a new PC is slightly different from moving earlier versions, because of the database system. The summary of steps is: * Stop VPOP3 on the original PC * Manually make a backup of the database on the original PC

Initial Configuration Tasks

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Initial Configuration Tasks After installing VPOP3, you will need to get into the VPOP3 settings. The easiest way of doing this is to find the VPOP3 Status Monitor in the Windows task tray. Right-click this icon, and choose 'VPOP3 Settings'. (If that doesn't work, see this article to troubleshoot Status Monitor problems). Alternatively, on the VPOP3 PC, you can go to Start

Restore selected mail folders or mailbox in VPOP3 v5 or later

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Restore selected mail folders or mailbox in VPOP3 v5 or later (This option is only available in VPOP3 Enterprise) First - if the problem is that messages were deleted very recently (the default is within 3 days), you can probably use the Undelete feature in VPOP3.

Sending mail from different email addresses or domains

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Sending mail from different email addresses or domains VPOP3 does not (by default) place any restrictions on which email addresses or domains you can send mail from. However, there may be external restrictions on which email addresses/domains you can send from. For instance, if you send mail through your ISP's mail server, they may only allow you to send mail from specific addresses, or the domain you send mail from may have a sender policy defined, such as

Spamfilter Whitelist & Blacklist

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spamfilter Whitelist & Blacklist The VPOP3 spamfilter has a whitelist and a blacklist for sender addresses. It also has a whitelist and blacklist for words/phrases. You can view these lists in the VPOP3 settings by going to Settings -> Spamfilter ->

Spamfilter Script Configuration tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spamfilter Script Configuration tab You reach this tab by going to Settings --> Spam Filter -> General, and then choose the General tab. The Spamfilter script has various settings that can be changed to alter the behaviour of the spamfilter. These are defined in the script, so may change with different versions of the script. The settings are currently:

Allow Remote Access to VPOP3 Mailboxes

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Allow Remote Access to VPOP3 Mailboxes Sometimes people want to be able to access their office VPOP3 mail server from a remote site or mobile phone etc. These instructions assume you have a permanent Internet connection (eg ADSL, Cable etc). If you don't have a permanent Internet connection, see

Autoresponders / Out of Office

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Autoresponders / Out of Office VPOP3 has an autoresponder facility for sending automatic replies when a message arrives in a mailbox. This is often used for 'Out of Office' replies, but it is not limited to that use. To set an autoresponder, the administrator can edit the user and go to the

Creating Extra SMTP Services

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Creating Extra SMTP Services In VPOP3 Enterprise (not VPOP3 Basic) you can create multiple SMTP services. This can be useful if you want VPOP3 to listen on different ports and/or have different settings. There are two ways of doing this. Have a single SMTP service listening on multiple ports or IP addresses

How To Encrypt Sessions

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How To Encrypt Sessions VPOP3 Enterprise 2.6 and later supports SSL/STARTTLS encrypted sessions to VPOP3 itself. So, the email client or web browser will encrypt the data passed to VPOP3 so it cannot be intercepted. This requires an SSL Certificate to be created for VPOP3.

Incoming SMTP Feed

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Incoming SMTP Feed An incoming SMTP feed is where incoming mail is sent directly to your mail server without going through your ISP's POP3 mail server on the way. Advantages An incoming SMTP feed has several advantages over going via a POP3 mailbox:

How to make VPOP3 re-download POP3 messages from the ISP

Anonymous (anonymous@undisclosed.example.com) — 2026-04-06T17:57:00+00:00

How to make VPOP3 re-download POP3 messages from the ISP If you have the VPOP3 Mail Collector setting Leave Mail On Server enabled, then VPOP3 will leave your messages on the ISP POP3 server for the specified number of days after downloading it. If, during this time, you want to make VPOP3 download those messages again, then you can do so.

Restore a database backup

Anonymous (anonymous@undisclosed.example.com) — 2025-12-17T09:19:40+00:00

Restore a database backup By default VPOP3 makes a daily backup of the VPOP3 database to a file 'DBBACK-n.DMP' in the VPOP3 installation directory (it is possible to change this in the settings). These are cycled on a weekly basis so you will usually have the last seven days' worth of backups. These can be useful if the database gets damaged somehow.

How To Move VPOP3 Version 2 to a New PC

Anonymous (anonymous@undisclosed.example.com) — 2019-11-12T16:06:44+00:00

How To Move VPOP3 Version 2 to a New PC (Also applies to version 1.x) To move VPOP3 to a new PC you should go through the following steps: * Copy the VPOP3 files * Copy the VPOP3 directory and subdirectories from the old PC to the new PC. (If you are moving to Windows Vista/2008/7/2012/8 or later, do NOT copy the files to a 'Program Files' folder on the new PC. Recent versions of Windows have special protection for those folders, which is not compatible with VPOP3)

How to move VPOP3 V5+ to a new folder

Anonymous (anonymous@undisclosed.example.com) — 2021-03-19T16:01:48+00:00

How to move VPOP3 V5+ to a new folder This guide assumes you want to move the whole of VPOP3 (including the message store) to a new folder on the same PC * Stop VPOP3 * Stop VPOP3DB * Remove the VPOP3DB service * Move VPOP3 to the new folder

How To Setup VPOP3 Service Security

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How To Setup VPOP3 Service Security VPOP3 can be configured to restrict access to its various services depending on the client computer's IP address. This is useful if you want to allow access from only certain IP addresses (eg within your LAN) and prevent access from other IP addresses (eg the Internet).

VPOP3 Server Access Not Allowed

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

VPOP3 Server Access Not Allowed If you get an error like: -ERR VPOP3 Server access not allowed! when trying to access VPOP3, then this means that the relevant server's IP Access Restrictions defined in VPOP3 do not allow access from your client computer.

Address Book tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Address Book tab The Address Book tab within VPOP3 webmail enables you to manage your lists of contacts and add those contacts into a new or existing message. Substantial alterations to the interface were introduced in version 5. Both interfaces are documented.

Attachment Processing Script

Anonymous (anonymous@undisclosed.example.com) — 2022-11-24T09:29:03+00:00

Attachment Processing Script (Added in v7.6) This script has functions to allow message attachments to be altered: * NeedsRecode * NeedsRewrite * GetRename * GetContentDispositionLine (added in v7.8) * IsLockNeeded * RewriteAttachment

Connections

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Connections In VPOP3 a Connection tells VPOP3 how to 'connect' to the Internet. VPOP3 supports up to 10 Connections, which can be either network connections or Dial-Up connections (using a modem) A Connection is linked to one Mail Sender and zero or more Mail Collectors.

Download Rules

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Download Rules Download rules are a facility in VPOP3 where it can look at message summary information before downloading a message from an ISP POP3 mailbox (they do not work on incoming SMTP messages - use SMTP Rules for that) To edit download rules, go to

Group a user's folders into letter groups

Anonymous (anonymous@undisclosed.example.com) — 2026-03-16T11:12:42+00:00

Group a user's folders into letter groups This is useful in VPOP3 Enterprise if you have a large folder with many subfolders and want to group the subfolders into other subfolders based on their first letter For example, if you have * Customers

Mail Collectors

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Mail Collectors A Mail Collector is how you tell VPOP3 to collect incoming mail. Each Mail Collector is associated with one or more Connections. The VPOP3 Connector Schedule determines when each Connection is run. Mail Collector General Tab Each Mail Collector has a General

Misc -> Advanced Tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Misc -> Advanced Tab Settings -> Misc Settings -> Advanced You will normally not need to change any settings on this page unless VPOP3 technical support have suggested it. If you do make changes, and want to go back to the original settings, the Restore Defaults button will restore the settings to their defaults.

SMTP -> General tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTP -> General tab This page is reached from Services -> SMTP Server, then the General tab. This page lets you set general settings for the SMTP service component of VPOP3. The SMTP service is how users send outgoing mail, and how incoming SMTP messages arrive. Service Name

Increase the spam score for certain recipients

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Increase the spam score for certain recipients This script is for the case where you want certain recipients to have a weighted score. For instance if you have users who have left and who mostly receive spam, but you don't want to reject their mail totally.

Message Rules

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Message Rules The Edit User -> Message Rules tab can be used to create/edit rules which are processed when messages arrive in a User's mailbox. They can be used to copy messages, mark them as read, delete them, etc VPOP3 will process Message Rules in the order they appear in the list. If you want to change the order of the rules, you can drag & drop them into the correct order. Usually when VPOP3 has processed a rule, it will go on to check further rules, but you can use the

Permissions

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Permissions This section lets you configure the permissions that a particular user has. Allowed Protocols The Allowed Protocols section lets you specify which services this user has access to. Note that these settings affect access to the whole service. If you want users to be able to access a service from some IP addresses, but not from others, then use the

Welcome to your new DokuWiki

Anonymous (anonymous@undisclosed.example.com) — 2022-10-01T11:32:39+00:00

Welcome to your new DokuWiki Congratulations, your wiki is now up and running. Here are a few more tips to get you started. Enjoy your work with DokuWiki, -- the developers Create your first pages Your wiki needs to have a start page. As long as it doesn't exist, this link will be red:

Version 5 Web Admin API

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Version 5 Web Admin API This section is only relevant for people who may want to access the Administration features from their own scripts, or want to customise the standard administration pages. Note that no free support is available for this. This is not a full list of features, but it will be updated from time to time.

How to Backup VPOP3

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to Backup VPOP3 By default VPOP3 v3 and later will automatically perform a daily backup of the database into a file called DBBACK-x.DMP, where the backup file rotates on a weekly basis (DBBACK-0.DMP is Sunday's backup, DBBACK-1.DMP is Monday's backup, etc).

Configuring Calendar on iOS

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Configuring Calendar on iOS These instructions are for configuring a new Calendar account on iOS for iPhone, iPad and iPod Touch. The version of iOS used for these instructions is iOS v6.0, but they will probably work or help with other versions of iOS.

Configure Email Signatures

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Configure Email Signatures * Global Signatures * Personal Signatures * Webmail Signatures Notes When creating a signature it is generally best to keep it as short as possible. Disclaimers & confidentiality notices in emails are generally regarded as having little or no legal significance, so lengthy signatures just use up bandwidth.

Database Maintenance

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Database Maintenance VPOP3 uses the PostgreSQL database server for most of its data storage. Normally this will not require any special maintenance, because it will manage itself. To do any special database maintenance you will need to close down VPOP3 first, because PostgreSQL needs exclusive access to the database to perform any operations such as decreasing the size of database files. Note that these operations may take some time! There are some PostgreSQL utility programs in the VPOP3\pgs…

Setting up VPOP3 to work with Exchange 2003

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Setting up VPOP3 to work with Exchange 2003 The instructions below are for Exchange Server 2003. For other versions of Exchange see here. You can link VPOP3 to Exchange Server, so that Exchange Server sends outgoing mail through VPOP3 and VPOP3 sends any incoming mail directly to Exchange Server.

Exchange 2007

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Exchange 2007 You can link VPOP3 to Exchange Server, so that Exchange Server sends outgoing mail through VPOP3 and VPOP3 sends any incoming mail directly to Exchange Server. You should first of all set up VPOP3 to send and receive Internet email as normal.

French Webmail Language File

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

French Webmail Language File Copy/paste the text below to a file 'french.lng' or 'francais.lng' in the VPOP3 directory. (French users, feel free to update/correct the text below) #login page logintitle=VPOP3 Login webadminlogin=web admin login webmaillogin=web mail login enterusername=You must specify your VPOP3 username here bookmarksnotsupported=I'm sorry, but your web browser does not support this function. You will have to add this page to your bookmarks manually. loginfailed=Login Faile…

German Webmail Language Page

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

German Webmail Language Page Copy/paste the text below to a file 'german.lng' in the VPOP3 directory. (German users, feel free to update/correct the text below) #login page logintitle=VPOP3 Login webadminlogin=web admin login webmaillogin=Webmail Anmeldung enterusername=Sie müssen einen Benutzernamen angeben bookmarksnotsupported=I'm sorry, but your web browser does not support this function. You will have to add this page to your bookmarks manually. loginfailed=Anmeldung fehlgeschlagen …

Make VPOP3 retry outgoing messages immediately

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Make VPOP3 retry outgoing messages immediately If VPOP3 has a temporary problem sending a message it will retry it later. When it will retry it depends on how many times it has already tried to send it, and is based on the 'Sender Retry' setting in the Mail Connectors

How To: Move VPOP3

Anonymous (anonymous@undisclosed.example.com) — 2019-11-12T16:09:34+00:00

How To: Move VPOP3 You can usually move VPOP3 without having to uninstall and reinstall. It is best to move VPOP3 rather than reinstalling from scratch on the new PC or in the new location, because that way you can keep all your existing settings, rather than having to try to recreate them.

PostgreSQL server won't start due to damaged log files

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

PostgreSQL server won't start due to damaged log files If the PostgreSQL server won't start at all, because its transaction logs are damaged, you will probably need to recreate the database store totally. To rebuild the database: * Open a command prompt and find the VPOP\pgsql folder

Redirect message for a user if a sender is a particular email address

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Redirect message for a user if a sender is a particular email address Say you want messages addressed to 'user1' to be redirected to 'user2' if they came from customer@domain.com This is an unusual requirement, so there is no way to do it in VPOP3.

How to remove messages from the outbound queue

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to remove messages from the outbound queue To delete messages from the VPOP3 'OutQueue': * log into the VPOP3 settings * go to the Users page * click on the OutQueue entry in the accounts list. This will show you a list of all the messages waiting to be sent by VPOP3

Require SMTP Authentication

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Require SMTP Authentication There are some situations where VPOP3 needs to know who is sending mail. This may be if you have VPOP3 configured to behave differently depending on who is sending messages - eg if you have different message size limits depending on the sender, or if you have message monitoring configured for certain users, or you don't want certain people to be able to send mail at all.

Setup steps for multiple POP3 accounts at the ISP

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Setup steps for multiple POP3 accounts at the ISP * Set up all the local users you need in the 'Users' page in the VPOP3 settings. The usernames & passwords do not have to have any relation to the ISP's accounts. These are the details which the users will put in their email clients (eg Outlook) to collect their mail from VPOP3.

Sharing IMAP4 folders

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Sharing IMAP4 folders Some email clients will allow you to share IMAP4 folders from within the client itself (eg eM Client) or have plugins to allow this (eg Mozilla Thunderbird with the Imap-ACL extension). In that case, you will need to see the documentation for that to set up sharing.

Using a Mobile Phone with VPOP3

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Using a Mobile Phone with VPOP3 Many people want to use a mobile phone to send/receive their email nowadays. This is usually easy to do with VPOP3. The recommended way is to have the phone connect directly to VPOP3 for sending/receiving email. To do this, you need to do three things:

How to move VPOP3 V3 to a new folder

Anonymous (anonymous@undisclosed.example.com) — 2018-12-05T15:25:41+00:00

How to move VPOP3 V3 to a new folder This guide assumes you want to move the whole of VPOP3 (including the message store) to a new folder on the same PC * Stop VPOP3 * Stop PostgreSQL * Remove the PostgreSQL service * Move VPOP3 to the new folder

VPOP3 Historical Logger Backlog

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

VPOP3 Historical Logger Backlog This problem is primarily related to VPOP3 versions 2.5 -> 2.6. Theoretically it could happen on later versions, but would be extremely unusual (see the note at the bottom if you are using version 3.0 or later) You get an error message with subject

SMTP Relay Protection in VPOP3

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTP Relay Protection in VPOP3 SMTP Relay Protection should be used on ALL SMTP mail servers (such as VPOP3) which have a permanent connection to the Internet. You may also want to use it on servers which are only connected occasionally via a dial-up connection.

AutoresponderConditionList Replacement

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

AutoresponderConditionList Replacement Use: ~autoresponderconditionlist~ Required parameter: responderid - the ID of the autoresponder This returns a JSON structure containing an array of the rules associated with the specified autoresponder. The return structure is an array of objects containing:

Version 5 Web Mail API

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Version 5 Web Mail API This section is only relevant for people who may want to access the WebMail features from their own scripts, or want to customise the standard Webmail pages. Note that no free support is available for this. This is not a full list of features, but it will be updated from time to time.

Copy SMTP Rules - Database Query

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Copy SMTP Rules - Database Query This is an advanced Database action. There is no simple query that will perform the required operation, so we have to create a custom PostgreSQL function to copy the data. At a command prompt in the VPOP3 directory run

Settings -> Global Address Book

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Settings -> Global Address Book The VPOP3 global address book allows users to access a shared address book from any email client which supports the 'LDAP' protocol (most modern email clients do, but they may call it 'directory service' Importing Entries

Import Users From File

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Import Users From File VPOP3 supports the importation and exportation of users, via a CSV file (see for a specification of the CSV file format). NOTE: This process is not designed to provide a complete backup of user data, nor is it intended to facilitate moving VPOP3 to a new computer. Instead, see the following relevant pages:

Mail Connectors -> Mail Senders

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Mail Connectors -> Mail Senders The Mail Sender tells VPOP3 how to send mail out to the Internet. If you want to send mail for specific users to another specific mail server (e.g. a local Microsoft Exchange Server or another VPOP3 server) then use the

Database query to make LAN Forwarding immediately attempt to dequeue all pending messages

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Database query to make LAN Forwarding immediately attempt to dequeue all pending messages If VPOP3 cannot send messages using LAN Forwarding it will queue the message and retry periodically. Usually there is no need to do anything special if there was a problem with the onward mail server which has now been fixed, VPOP3 should soon retry the messages automatically (based on the value of the

Management Scripting

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Management Scripting In VPOP3 Enterprise, from version 6.17 there is the facility to run Lua scripts manually or according to a schedule. These scripts can do things like access mail folders & messages and perform some maintenance on them. Creating a new script

POP3 Mail Collection

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

POP3 Mail Collection POP3 Mail Collection is when VPOP3 will collect mail from an external POP3 mailbox - for instance, from an Internet Provider. POP3 General This page tells VPOP3 how to collect mail. * POP3 Server Address - this is the name (or IP address) of the POP3 server from which you want VPOP3 to collect mail

Scheduling Management Scripts

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Scheduling Management Scripts VPOP3 runs a script called scheduler.lua in the background, it will periodically call functions in this script at approximately 1 minute, 5 minute, 1 hour and 1 day intervals. These times are only approximate so should not be relied upon for timing.

Signature Script

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Signature Script If you want more complex signatures on outgoing emails, rather than the static text/HTML you can define within VPOP3, then you can use a simple Lua script to define the signature. The Lua script is stored in a file called signature.lua

SMTP Service - Filtering

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTP Service - Filtering The SMTP Server -> Filtering tab lets you set up filtering of messages going through the VPOP3 SMTP service. This may be incoming SMTP messages, or locally sent messages. SMTP Rules SMTP Rules let you create custom rules for processing messages as they go through the VPOP3 SMTP service.

Spam Filter Rules

Anonymous (anonymous@undisclosed.example.com) — 2023-01-18T15:57:13+00:00

Spam Filter Rules VPOP3 Versions 2.1.7 and later have a built-in spam filter system which supports a simple script language optimised for content- and spam-filtering of email messages. This reference contains a definition of the spam filtering script language supported by VPOP3. Note that as later versions of VPOP3 are released, more language features may be added, so this reference indicates in which version of VPOP3 a particular feature was added.

Use the spam filter scripting to add random text to the subject on incoming messages

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Use the spam filter scripting to add random text to the subject on incoming messages This needs VPOP3 version 5 or later. This script is for the case where you want a message to the 'support' user to have the text [XXX-99999] added to an incoming message's subject if it does not already exist. Some people want this text to use as reference numbers for a

Summary Log File Format

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Summary Log File Format VPOP3 creates a file called SUMMARY.LOG in the VPOP3 directory which contains summary information which is compiled daily into a daily summary reports sent to the administrator. VPOP3 can keep these summary logs in a subdirectory called

User Advanced settings

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

User Advanced settings The Edit User → Advanced tab contains some 'advanced' settings for a VPOP3 user. Message Recycle Bin In VPOP3 Enterprise (v5 and later) the Message Recycle Bin will keep messages in the message store for a short time after the user has deleted the messages. This is to allow easier recovery from the inevitable case where a user has deleted messages by mistake, and wants them back.

User Manager Script

Anonymous (anonymous@undisclosed.example.com) — 2024-04-22T08:37:38+00:00

User Manager Script If you want people to be able to log in using a different username than their VPOP3 username (eg if you want them to be able to log in using an email address), then you can use the UserManager Lua script The Lua script is managed through the Settings → Scripts page in VPOP3 v8.0 and later and is called 'UserManager.LUA.

Prune Rules

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Prune Rules The Edit User -> Prune Rules tab can be used to create/edit rules which cause messages to be automatically deleted according to specified criteria. To add or edit a “prune rule”, press the Add Rule button. This will add a new rule to the table, with a set of default settings. Don't worry, this rule doesn't take effect until you press the Submit button.

VPOP3 Wiki

Anonymous (anonymous@undisclosed.example.com) — 2022-10-01T11:36:44+00:00

VPOP3 Wiki Welcome to the VPOP3 Wiki. Here you will find VPOP3 documentation, FAQs and “How To” articles * FAQs * How Tos / Troubleshooting * Reference * Tips & Tricks If you want to add information, hints & tips, etc, you can register on this Wiki and modify or create new pages. Please don't ask questions on the Wiki; if you have a question, ask it on

Can I change the VPOP3 licence owner name?

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Can I change the VPOP3 licence owner name? The VPOP3 licence owner name is tied to the licence key, so you cannot just change the name without getting a new licence key. There is generally no need to change the licence owner name since it is not published anywhere, but if you really must change the name, then you can request a name change if you upgrade to a later version or larger size of VPOP3 or there is a £10 administration fee if you just want to change the name without upgrading the lice…

Can you remotely log into our VPOP3 computer to fix a problem?

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Can you remotely log into our VPOP3 computer to fix a problem? We can remotely log into your VPOP3 computer if you wish. However, this is not a free service, and needs purchased technical support, either on an annual support contract, or on a pay-per-incident basis (

GDPR for VPOP3 self-hosted software

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

GDPR for VPOP3 self-hosted software VPOP3 is an email server program, it is not a service, so if you use VPOP3 on your own computer we are not a “data controller” or a “data processor” under GDPR rules as we never see any of your data (unless you give us permission to remotely connect to your PC for technical support purposes).

GDPR for hosted VPOP3 service

Anonymous (anonymous@undisclosed.example.com) — 2025-10-14T15:43:01+00:00

GDPR for hosted VPOP3 service (Since Brexit, the UK has “UK GDPR” instead of “EU GDPR”, so this document refers to UK GDPR) Also see GDPR for VPOP3 as most of that applies to the VPOP3 hosting service as well. This Data Processing Agreement is part of our hosted VPOP3 service terms. You can view the revision history by clicking on the 'clock' icon to the right.

GDPR for other hosting services (eg web hosting)

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

GDPR for other hosting services (eg web hosting) As a hosted service provider, we are classed as a “Data Processor” under the GDPR regulations. For our hosting services: * Data is held in the UK. Data is not transmitted outside of the EU except at your explicit request or command.

How do I get support?

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How do I get support? You can get support for our software products in several ways. By telephone * You can purchase an annual priority support contract. The cost depends on your current VPOP3 licence, and costs 50% of the licence price per year (with a minimum of £100) per software licence (+VAT if applicable) . This entitles you to software upgrades, remote support and telephone support during UK office hours and priority email support where we aim to respond to your email within 3 hours …

SMTP Relay Service FAQ

Anonymous (anonymous@undisclosed.example.com) — 2021-06-29T08:35:43+00:00

SMTP Relay Service FAQ We provide an SMTP Relay Service for many of our customers. The price starts from £40 (+VAT if applicable) per year, for up to 5000 messages, or 750MB, per month. How do I order the SMTP Relay Service? To order the SMTP relay service, either email

What is the VPOP3 Antivirus solution?

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

What is the VPOP3 Antivirus solution? “VPOP3 Antivirus” is a new product to replace the avast! for VPOP3 product which will no longer be supported after the end of 2012. VPOP3 Antivirus uses the popular 'ClamAV' virus scanner to scan incoming and outgoing messages for viruses.

What is Software Maintenance?

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

What is Software Maintenance? VPOP3 Software Maintenance includes basic email support (target turnaround within 3 days) as well as version upgrades (eg 6.19 to 6.20) free of charge when they are released during the period of validity of your Software Maintenance.

What is Software Maintenance?

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

What is Software Maintenance? VPOP3 Software Maintenance includes basic email support (target turnaround within 3 days) as well as version upgrades (eg 4.x to 5.x) free of charge when they are released during the period of validity of your Software Maintenance.

Which Ports does VPOP3 use?

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Which Ports does VPOP3 use? If you want to use VPOP3 through a firewall, you will need to open up some TCP ports in the firewall. VPOP3 uses several ports, for the different services it provides. The best way to see the ports it uses is to go to Services

550 5.7.1 Relaying not allowed! Bad sender IP address

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

550 5.7.1 Relaying not allowed! Bad sender IP address This SMTP error message means that the computer which is sending the message is not permitted to send outgoing messages based on the VPOP3 SMTP Service's Access Restrictions. This is probably because someone is trying to send messages from outside your local network, and you have not configured VPOP3 to allow this. You have to be careful when allowing this, because you may configure VPOP3 to be an open-relay, which is a

550/553 Not Permitted error from BT Internet's mail servers

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

550/553 Not Permitted error from BT Internet's mail servers BT Internet's mail servers only allow messages to be sent from 'approved' email addresses. If you try to send messages from other addresses BT's mail servers may return a '550 Not Permitted' error, a '553' error, or may silently discard the message depending on what their server feels like doing today.

Attachments have been removed or renamed

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Attachments have been removed or renamed If you have received an email and one or more of its attachments have been removed or renamed, it might be a result of Attachment Filtering. You can inspect the filtering rules by going to Administration Settings -> Settings ->

How to automatically forward spam to the PSCS spamtrap

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to automatically forward spam to the PSCS spamtrap Spam filter companies use “spamtraps” to catch samples of spam for analysis so filters can be updated. We do this here as well. Most types of spam are already caught by our spam traps, however sometimes people get lots of spam which gets through the filter because their particular type of spam does not currently get sent to our spam traps.

Calendars

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Calendars To use the calendar facility in VPOP3 you need a CalDAV aware client. We have tested it with the free Mozilla Sunbird & Lightning products as well as the emClient email client. These products need a URL to be able to access the CalDAV data store. Once you have the URL (see below), copy it into the

Changing a user's password

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Changing a user's password To change a user's password in VPOP3, you should log into the VPOP3 settings, go to the 'Users' page, then double-click on the user whose password you want to change. This will bring up a window giving you access to the user's settings. Go to the 'Passwords' tab where you can set the passwords.

Configure SRS

Anonymous (anonymous@undisclosed.example.com) — 2025-08-18T15:28:11+00:00

Configure SRS In VPOP3 8.8 and later, you can use Lua scripting to implement 'SRS' (Sender Rewriting Scheme') in VPOP3 This involves adding a couple of functions to rewrite outgoing return paths in 'relayout.lua' or 'mxout.lua' as appropriate and a couple of functions to redirect rewritten bounce message recipients in 'smtpsvr.lua'

Copy Outgoing mail

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Copy Outgoing mail Sometimes people need to copy outgoing mail for various reasons. There are several ways of doing this in VPOP3 depending on your exact requirements: * Message Monitoring - this copies all outgoing, incoming and/or internal mail sent by/to specific users to another specific user

Delete OutQueue messages directly from the database

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Delete OutQueue messages directly from the database If there is an extremely large number of messages (eg hundreds of thousands) in the VPOP3 OutQueue, then it may take a very long time for VPOP3 v5 and later to start as it check the message database tables for consistency during initialisation.

Don't download big messages during the working day using Download Rules

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Don't download big messages during the working day using Download Rules Say you don't want to download messages over 10,000,000 bytes long between 8:00am and 6:00pm. To do this, create a download rule as: * Rule Type: Ignore * Match Type: All Conditions

Error Message Handling

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Error Message Handling VPOP3 will normally send an error message to the Main Administrator every time it encounters an error. We recommend you leave it like this in most cases - if an error message occurs repeatedly, then it usually means there's an underlying problem which needs resolving rather than ignoring.

How to 'share' domains between Exchange and VPOP3

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to 'share' domains between Exchange and VPOP3 If you want to have a VPOP3 server and Exchange Server using the same email domain, then you need to ensure that Exchange does not think it is 'authoritative' for the domain in question. See for details of how to do this in Exchange 2000 and 2003 (a similar process may be used in later versions of Exchange - contact your Microsoft Support technician if you need more help).

Installation checklist

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Installation checklist This list contains some things you may want to check before or after installing VPOP3 to make sure it's not going to encounter any common issues. Before installation * Make sure that VPOP3 is not installed on a RAID 5 or RAID 6 array.

How to install PostgreSQL to use another port

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to install PostgreSQL to use another port If the VPOP3 computer has a version of PostgreSQL older than version 8.3 installed for other software, and you can't/don't want to remove that you need to set up the PostgreSQL 8.3 or later for VPOP3 to use a different TCP/IP port number.

Setting up an iPhone/iPad/iPod Touch

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Setting up an iPhone/iPad/iPod Touch To set up an iPhone to access VPOP3's mail, you first of all need to configure VPOP3 to allow access by remote users (unless you will only be using the iPhone in the office, connected via WiFi to the office LAN). Adding the mail account to your iPhone/iPad

Move the message store - alternative method

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Move the message store - alternative method This method moves the database data storage location, but not the whole database. This means that the database configuration, logs, transaction logs etc are still stored in the VPOP3\pgsql\data folder, but the actual database tables & indexes are stored in the new location. This may be simpler, but, depending on your requirements,

How to configure Outlook 2007

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to configure Outlook 2007 Email SMTP Authentication To set up SMTP authentication in Outlook 2007, if your VPOP3 requires it, go to Tools -> Account Settings, select your email account and press Change.... Then, press the More Settings... button

How to configure Outlook 2010

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to configure Outlook 2010 In many ways, configuring Outlook 2010 is a similar to configuring Outlook 2007. The biggest difference you are likely to notice is the new “Ribbon” interface, in place of the traditional menu bar (File, Edit, View, etc.) Email

Outlook / Outlook Express is sending mail repeatedly

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Outlook / Outlook Express is sending mail repeatedly If you are using Outlook or Outlook Express you may occasionally find that mail is being sent repeatedly. There are a couple of possible reasons for this which we know of Sending taking too long

Spam Quarantine

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spam Quarantine By default, when the VPOP3 spam filter detects a message as being spam, it will go to the user's quarantine. Users can release messages from the quarantine by going to their webmail page and selecting the message from the quarantine list there.

Recovering messages from corrupted database into fresh database

Anonymous (anonymous@undisclosed.example.com) — 2025-09-11T13:48:07+00:00

Recovering messages from corrupted database into fresh database If the VPOP3 message database is corrupted, then one option is to build a fresh database and restore the settings into it, then recover the messages from the old database using the 'Message Restore' function in VPOP3. This has minimal downtime, but old messages will not all be available until the restore has completed. New messages will be available quickly, and you will be able to send messages.

How to Restore a backup of VPOP3

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to Restore a backup of VPOP3 The instructions below are to restore a full backup. You may also be able to recover deleted messages if you do not need to restore a full backup. Version 5 or later If you just need to restore a database backup, see steps 4 to 7 below.

Restore Deleted Calendars

Anonymous (anonymous@undisclosed.example.com) — 2022-11-18T11:43:52+00:00

Restore Deleted Calendars This article will help if a user has been deleted and all their calendars are lost and need to be restored. Note that this functionality is not built into VPOP3, and requires the use of Python3 to run a script First you need to install Python 3.8 or later, and the psycopg2 plugin

Restricting the number of recipients sent to

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Restricting the number of recipients sent to Some ISPs set restrictions on the number of recipients that you are allowed to send in a certain time period, eg 50 messages per hour, or the number of recipients that you are allowed to send per message or per connection.

Restricting the number of messages sent

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Restricting the number of messages sent Some ISPs set restrictions on the number of messages that you are allowed to send in a certain time period, eg 50 messages per hour, or the number of messages that you are allowed to send per connection. Restriction of messages per connection

Sender Policy Framework / SPF

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Sender Policy Framework / SPF SPF is a system used to tell mail servers which IP addresses can send mail from which domains. It is designed to reduce 'spoofing' of email addresses. For instance, if you receive an email message from your bank, your mail software can check that it came from an IP address authorised to send mail from your bank, and treat the message with suspicion if it didn't come from an authorised IP address.

Total Rebuild of Database

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Total Rebuild of Database If you suspect database corruption, sometimes the best thing to do is to totally rebuild the database. This involves six steps: * Stop VPOP3 * Backup Database * Delete Database * Re-create Database * Restore/Create Database

How to upgrade your VPOP3 licence

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to upgrade your VPOP3 licence You can purchase a VPOP3 upgrade by going to You will need to enter your current licence details, and the website will give you your upgrade options. If you want to upgrade the licence size or from VPOP3 Basic to VPOP3 Enterprise at the same time as upgrading to the latest version of VPOP3, then choose the 'Upgrade to the latest version' option, and you will be given further choices of licence upgrades you can …

Using VPOP3 Advanced Features with LAN Forwarding

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Using VPOP3 Advanced Features with LAN Forwarding If you are wanting to use any of VPOP3's advanced features (such as mailing lists, message monitoring, wildcard aliases etc) because you are LAN forwarding to a less capable server, then you will usually need to have VPOP3 do all its normal message routing functions initially, then, as the final stage have it forward the messages on to the other server.

Using VPOP3 Spam Filtering with LAN Forwarding

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Using VPOP3 Spam Filtering with LAN Forwarding When using the VPOP3 Spam filter with LAN forwarding you need to be aware a bit of how it works. The spam filter will only quarantine messages which are going to a VPOP3 user. This is because that user needs to be able to log into VPOP3 to be able to view their quarantined messages.

How to move the VPOP3 Message Store to a new PC

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to move the VPOP3 Message Store to a new PC Use this option if you want to have VPOP3 running on one PC, but have the message store database on another PC. Manually Install PostgreSQL on the new PC Download the 'pgInstaller' version of PostgreSQL from the

v3/4 - Move the message store to a new folder/drive

Anonymous (anonymous@undisclosed.example.com) — 2018-12-05T15:25:24+00:00

v3/4 - Move the message store to a new folder/drive This guide assumes you want to just move the VPOP3 message store/database to a new folder on the same PC, and leave the VPOP3 installation directory where it is. * Stop VPOP3 * Stop PostgreSQL

v5 - Move the message store to a new folder/drive

Anonymous (anonymous@undisclosed.example.com) — 2019-11-12T16:10:42+00:00

v5 - Move the message store to a new folder/drive Here is an alternative method, which may be simpler, but only moves the data, not the whole database store (which is a subtle difference) This guide assumes you want to just move the VPOP3 message store/database to a new folder on the same PC, and leave the VPOP3 installation directory where it is.

VPOP3 is using a lot of disk space

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

VPOP3 is using a lot of disk space If VPOP3 is using a lot of disk space, the problem is usually that there is lots of data there, so it has to use the disk space. Message Storage In VPOP3 version 5 and later, all users' messages are stored in the database, so they will occupy space in the VPOP3\pgsql\data folder.

VPOP3 re-downloading old messages from the ISP POP3 server

Anonymous (anonymous@undisclosed.example.com) — 2026-01-05T09:31:47+00:00

VPOP3 re-downloading old messages from the ISP POP3 server If you tell VPOP3's POP3 mail collector to leave messages on the ISP's server for a few days, you may find that sometimes VPOP3 will redownload all the messages from the ISP mailbox again.

What is the best practice to delete old messages from the VPOP3 archive folder?

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

What is the best practice to delete old messages from the VPOP3 archive folder? You should use the 'Offline' tab in the VPOP3 Message Archive settings to tell VPOP3 to move old messages into a ZIP file. You can then store this ZIP file somewhere safe in case you need to refer to it in the future. (If you know you won't want to ever refer to these old messages, you could just delete the ZIP file, but storage costs nowadays are so cheap, we'd recommend keeping it, just in case).

How to write your own spam filter rules

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to write your own spam filter rules VPOP3's spam filter uses a basic scripting language designed for filtering email messages, so a full description of writing your own rules would be very long and complex, as it is really something that only a programmer should do.

Settings -> Admin Settings

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Settings -> Admin Settings The Admin Settings page allows you to perform three key functions: * * * Choosing a Main Administrator The Main Administrator receives notification emails, such as daily reports and errors/problems which may require manual intervention.

Database query to alter LAN Forwarding rules for one server to go to another

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Database query to alter LAN Forwarding rules for one server to go to another If a LAN forwarding destination server fails, you may wish to change the queued messages to go to the new server. (Note that, if planning ahead, it may be easier to use DNS

Database query to alter LAN Forwarding rules for one server to go to another

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Database query to alter LAN Forwarding rules for one server to go to another If a LAN forwarding destination server fails, you may wish to change the LAN forwarding rules to point to the new server. (Note that, if planning ahead, it may be easier to use

Message Archive -> General

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Message Archive -> General Settings -> Message Archive -> General Tab Archive Messages If the Archive Messages box is checked, then VPOP3 will archive incoming and outgoing messages. Main Archive Store Directory You can set the message archive store to any directory accessible by the VPOP3 service. Enter the path in the

Archive Script

Anonymous (anonymous@undisclosed.example.com) — 2023-03-25T23:33:31+00:00

Archive Script (from VPOP3 v6 onwards) Archive scripting lets you indicate whether full message content should be stored in the message archive. This could be used, for instance, for filtering out messages containing credit card details. The message headers will still be archived, along with the explanation text returned by the script.

Message Archive -> Results Tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Message Archive -> Results Tab Settings -> Message Archive -> Results tab The Results tab only exists if you have previously done a search operation and are viewing the results of that search. The Results page shows you a list of the messages (up to 1000 entries are available) returned by the search. You can select multiple entries by using shift+click or ctrl+click

Autoresponders - v3 and v4

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Autoresponders - v3 and v4 This section lets you define an autoresponder for a user. An autoresponder is a message which is sent back in response to a message which arrives in this user's mailbox. The Autoresponder Type can be set to None, Simple Autoresponder

Database -> Backups Tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Database -> Backups Tab The Backups tab lets you specify how VPOP3 will make its daily backup of its database. We strongly recommend that you backup the database regularly in case of disk problems or file corruption. You can use the VPOP3 backup feature, or manually backup the PostgreSQL database using the pg_dump command, or use another program to backup the PostgreSQL database if you wish. Note that a simple disk copy will

Database -> Restore Tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Database -> Restore Tab This tab is only in VPOP3 Enterprise (v5 and later), and is for performing a partial (mailbox/mail folder) restore of the database. To do a full restore of the database, or for VPOP3 Basic/Standard, see the “Restore a Backup of VPOP3” topic Using the

DMARC Reporter Script

Anonymous (anonymous@undisclosed.example.com) — 2023-11-12T09:51:40+00:00

DMARC Reporter Script (from VPOP3 v8.6 onwards) This script lets you customise how VPOP3 sends DMARC reports to the sending domain. This can be useful in case the sending domain's DMARC configuration is incorrect as that can cause errors sending the reports or cause messages to be 'stuck' in VPOP3's Outqueue. These problems won't cause any lasting damage, but may be inconvenient or annoying, so you can alter the behaviour using Lua scripting

Error Handling Scripting

Anonymous (anonymous@undisclosed.example.com) — 2023-11-20T10:18:01+00:00

Error Handling Scripting For most error messages that VPOP3 generates, it allows control of error messages, eg to limit the frequency of error messages if they would be generated repeatedly. These limits are set in Settings -> Admin Settings -> Message Control. However, if you want more granular control, you can use Lua scripting for more fine-grained control

Database query to export LAN Forwarding rules

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Database query to export LAN Forwarding rules At a command prompt in the VPOP3 directory run psql (The password is 'vpop3pass') Then, type \copy (select conditions, address, server, username, password, outaddress as rewriteaddress, matchcount as matches from rules.lanforwarding order by ruleorder) to 'c:/temp/x.csv' csv header;

Database query to find forwards/assistants etc in user settings

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Database query to find forwards/assistants etc in user settings Go to Settings -> Database -> Query Alternatively, at a command prompt in the VPOP3 directory run psql (The password is 'vpop3pass') Then, type select username,dataname,datavalue from users.usersettings inner join users.users using(usernumber) where datavalue ilike '%searchname%';

Database query to get all lists and members

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Database query to get all lists and members At a command prompt in the VPOP3 directory run psql (The password is 'vpop3pass') Then, type \copy (select l.name, address from users.listmembers m inner join users.lists l on m.list=l.id) to 'c:/temp/x.csv' csv header;

Groups

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Groups In VPOP3 a 'group' is mainly an administrative feature. If you only wish to have a list of email addresses to send messages to under one address, you should use the 'List' feature instead. The main function of Groups is to let you set certain user attributes for a whole group of users at once.

IMAP4 -> Advanced tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

IMAP4 -> Advanced tab This page is reached from Services -> IMAP4 Server, then the Advanced tab. Here are some advanced options for the IMAP4 service in VPOP3 Fake access to inaccessible mailboxes In the IMAP4 service you may have folders which do not exist. For instance, if you are accessing a shared Inbox folder from a user called 'Karen', then their folder will be called

Incoming SMTP Mail

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Incoming SMTP Mail If you have an incoming SMTP mail feed, then the mail server sending mail to you will connect to your VPOP3 computer to send the mail. The mail connection is controlled by the sending computer. IMPORTANT If you have a permanent Internet connection with a static IP address, the usual way of having incoming SMTP is to configure your

LDAP Schema in VPOP3 4.x

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

LDAP Schema in VPOP3 4.x Hierarchical Structure LDAP data is stored as a hierarchical database with the 'DN' (Distinguished Name) of the object as the key. The DN is made up of the various 'Relative DNs' used to navigate to the desired object, placed in reverse order, separated by commas.

Lists

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Lists The Lists section in VPOP3 lets you view and manage the various types of 'List' which VPOP3 supports * Distribution Lists * Mailing Lists * Forwardings * ODBC Mailing Lists * Groups Using a list A list will contain zero or more 'members' (usually email addresses) which can be messaged all at once. To send a message to all the members of a list, you will usually send an email to the listname at a valid domain.

ListServer Commands

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

ListServer Commands The ListServer is an automated process in VPOP3 which manages mailing lists. People can send commands to the ListServer to perform various functions remotely. Whether these commands are allowed, and exactly how they work depends on the particular mailing list's settings.

Settings -> Local Mail -> General

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Settings -> Local Mail -> General The Local Mail -> General page allows you to configure a few simple, but fundamentally important settings. Default Domain In the majority† of cases, this is the domain name that VPOP3 will use when sending automated messages; for instance, users may receive a message from

Logging

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Logging Activity Summary Reports You can tell VPOP3 to send you a daily summary report each day. To do this check the box to say Send daily summary logs to, and choose the appropriate user (or “Main Administrator” if you want the reports to be sent to the

Lua Scripting

Anonymous (anonymous@undisclosed.example.com) — 2026-03-26T23:49:01+00:00

Lua Scripting Lua is a simple scripting programming language often used for embedding in other applications. VPOP3 uses it to customise behaviour in places where most people will be happy with the default behaviour, but occasionally people will want to do something more complicated. Rather than having lots of extra options to complicate things for most users, we have opted to go for a more flexible scripting facility.

Lua SMTP Relay Control

Anonymous (anonymous@undisclosed.example.com) — 2025-08-14T09:24:55+00:00

Lua SMTP Relay Control Every time VPOP3 is going to send messages via SMTP Relay, it runs a script called relayout.lua in the VPOP3 directory. Global Variables This script may have global variables, depending on your version of VPOP3. In VPOP3 3.0.0L and later, there are two read-only global variables set at the start of the script:

Mappings

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Mappings In VPOP3, Mappings are a way of explicitly linking an email address to a user or list. They can also be used to indicate that an email address is remote, even though it would otherwise appear to be a local email address. In other email servers, a similar feature may be called 'aliases'

Message Monitoring

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Message Monitoring Message monitoring in VPOP3 will tell VPOP3 to send a copy of all the outgoing, internal and/or incoming mail from/to specified users to be sent to another specified user. In the current versions of VPOP3, all monitored messages are sent to the same user (or list), you cannot specify different recipients for different monitored users. (This may be something that is added/enhanced in the future)

Misc -> DNS Tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Misc -> DNS Tab Settings -> Misc Settings -> DNS The DNS tab lets you specify which DNS servers VPOP3 will use. DNS (Domain Name System) is a system which converts Internet host names (eg www.google.com) into a numeric IP address (eg 1.2.3.4), because all connections on the Internet are actually performed using numeric IP addresses, but it is easier for people to remember names.

Password Lengths

Anonymous (anonymous@undisclosed.example.com) — 2021-11-29T12:06:24+00:00

Password Lengths If you want to do an audit of users' password lengths, then go to Settings -> Database -> Queries and run this query: SELECT username,LENGTH(DECODE(SUBSTRING(datavalue FROM 2),'base64')) FROM users.usersettings INNER JOIN users.users USING(usernumber) WHERE dataname='mainpassword';

POP3 Server -> General Tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

POP3 Server -> General Tab Services -> POP3 Server -> General tab This page sets the general settings for the POP3 service component in VPOP3. The POP3 service is how users collect their email from VPOP3 using a POP3 email client Service Name The Service Name is a name you give the service for your reference. It is only used in administrative displays and logging, so the name doesn't matter. Most people leave it at the default.

Reports

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Reports The Reports tab lets you access various reports about VPOP3 or message history. For many of reports to work, you need to have previously enabled historical logging. The currently available reports are listed below. To view a report, click on its name at the left of the page

Running database updates within a transaction

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Running database updates within a transaction This is a trick which database experts use, because they have learned (often the hard way) that a simple mistype can trash a database... Before running any database query which can alter the database (UPDATE, DELETE, INSERT, DROP, CREATE, ALTER) begin a database transaction using the

Mail Connectors -> Connector Schedule

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Mail Connectors -> Connector Schedule The Connector Schedule tells VPOP3 when to connect to send mail using Mail Senders and collect mail using Mail Collectors. It does not affect incoming SMTP over a permanent connection, or LAN Forwarding. The connection schedule also tells VPOP3 when to check for updates to the

Security Settings -> Intrusion Protection Tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Security Settings -> Intrusion Protection Tab Settings -> Security Settings -> Intrusion Protection Tab Starting in VPOP3 v6.0, VPOP3 can monitor failed logins for all accounts across all services and block an attacker's IP address from accessing VPOP3 for a specified time

Mail Sender Advanced Relay Settings

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Mail Sender Advanced Relay Settings SMTP Return Address The SMTP Return Address (or Return Path) is a hidden part of a message which says where bounce messages (and other automated responses) should be sent. (It is not the same as the Reply address

SMTP Direct Sender Settings

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTP Direct Sender Settings Mail Connectors -> Mail Senders -> SMTP Direct Sender -> Settings tab The SMTP Direct Settings tab lets you set how VPOP3 will send mail using SMTP Direct DNS Servers to Use This setting tells VPOP3 the IP addresses of the DNS servers it should use to find the recipients' mail servers. Separate multiple addresses with commas.

SMTP Service -> Advanced Tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTP Service -> Advanced Tab Services -> SMTP Server -> Advanced Tab Refuse SMTP Connections from This setting should be rarely needed, and should be normally left blank. It is here for historic purposes. If you put some text in this box, then VPOP3 will refuse any SMTP connections from clients whose 'HELO'/'EHLO' command data contains the text specified here as a substring. Eg, if this setting is set to '.myisp.com', then VPOP3 would refuse SMTP connections from any client which sends the c…

Mail Connectors -> Mail Senders -> SMTP Direct

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Mail Connectors -> Mail Senders -> SMTP Direct VPOP3 can be configured to send mail directly to the recipient's mail server (or the recipient's mail service provider). Usually this is only used if you have a high-end business class Internet connection - such as a leased line, or your mail server is co-located in a data centre. Attempts to use SMTP Direct sending on a dial-up/ADSL/Cable/FTTC/etc connection may be problematic since the receiving mail server may think you a home user who has been …

SMTP Reputation Stats

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTP Reputation Stats (Added in v6.20) If you receive email by direct incoming SMTP (not via an ISP or filtering service) then you can tell VPOP3 to report sender reputation statistics back to VPOP3. This is enabled/disabled in the Settings -> Misc Settings page.

Spamfilter Rule Weights

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spamfilter Rule Weights To edit the spamfilter rule weights, go to Settings -> Spamfilter -> General -> Rule Weights The VPOP3 spamfilter contains several rules which test for certain things, eg 'adult words', or entries in real-time blacklist databases, or whitelisted email addresses etc.

Increase the spam score for header marker

Anonymous (anonymous@undisclosed.example.com) — 2020-10-05T16:14:12+00:00

Increase the spam score for header marker This script is for the case where your ISP adds a header eg 'X-Spam: Yes' to the message header, and you want the VPOP3 spamfilter to quarantine messages with that marker. Add the following to the spamrules_userchecks.txt file. This script file only gets processed on incoming messages (the spamrules_localmail.txt script ends the processing of locally sent messages)

Allow messages through from a specific IP address

Anonymous (anonymous@undisclosed.example.com) — 2022-01-25T11:59:27+00:00

Allow messages through from a specific IP address This script allows messages through the spam filter if they arrive at VPOP3 from a specific SMTP sender (only when the message is sent directly to VPOP3 using SMTP, not via another server). Add the following to the spamrules_userlocal.txt file. This script file gets processed on all messages.

Increase the spam score for subject marker

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Increase the spam score for subject marker This script is for the case where your ISP adds a marker eg '[spam]' to the message subject, and you want the VPOP3 spamfilter to quarantine messages with that marker. Add the following to the spamrules_userchecks.txt file. This script file only gets processed on incoming messages (the spamrules_localmail.txt script ends the processing of locally sent messages)

Status Monitor (port 5109) protocol

Anonymous (anonymous@undisclosed.example.com) — 2019-08-19T08:58:45+00:00

Status Monitor (port 5109) protocol This page documents the protocol used between VPOP3 and the Status Monitor. It's not intended for any other purpose, so it's a bit limited, but in certain cases you may find this useful Login Before the Status Monitor receives any updates or can issue commands it must log in using a user's credentials.

Autoresponder

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Autoresponder An autoresponder is a way of automatically replying to messages as they arrive in a user's mailbox. In VPOP3, an incoming message must arrive in a user's mailbox for the autoresponder to trigger. If you use forwards, assistants, mappings, etc to divert a message before it arrives in the mailbox, the autoresponder will never trigger. If you want to use an autoresponder, but not keep the original message, then make sure the message arrives in the mailbox (eg by using an 'Assistant'…

Tips & Tricks

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Tips & Tricks Here we will put some 'tips and tricks' type articles. If you want you can login then 'Subscribe Namespace Changes' below to be told when any new tips are added, or when any changes are made to existing pages. Alternatively you can use the RSS feed link at the bottom of the page in your favourite RSS feed reader.