PSCS Wiki

How to Backup VPOP3

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to Backup VPOP3 By default VPOP3 v3 and later will automatically perform a daily backup of the database into a file called DBBACK-x.DMP, where the backup file rotates on a weekly basis (DBBACK-0.DMP is Sunday's backup, DBBACK-1.DMP is Monday's backup, etc).

VPOP3 Database Size

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

VPOP3 Database Size The VPOP3 directory is stored in the VPOP3\pgsql\data folder and subfolders. If you are concerned about the size of the VPOP3 database, there are several factors which may make the database larger than you would expect: * The VPOP3 database contains a lot more information than just messages in mailboxes. This can include settings, outgoing messages, historical logging information, statistical information for the spamfilter, information about archived messages, etc. Also,…

Socket Error 10053 - An established connection was aborted by the software in your host machine.

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Socket Error 10053 - An established connection was aborted by the software in your host machine. Error 10053 means that an established connection has been dropped. There are three descriptions of this error message we know about, but the descriptions are given by Windows, so they may vary depending on your version of Windows:

Setting up VPOP3 to work with Exchange 2003

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Setting up VPOP3 to work with Exchange 2003 The instructions below are for Exchange Server 2003. For other versions of Exchange see here. You can link VPOP3 to Exchange Server, so that Exchange Server sends outgoing mail through VPOP3 and VPOP3 sends any incoming mail directly to Exchange Server.

Exchange 2007

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Exchange 2007 You can link VPOP3 to Exchange Server, so that Exchange Server sends outgoing mail through VPOP3 and VPOP3 sends any incoming mail directly to Exchange Server. You should first of all set up VPOP3 to send and receive Internet email as normal.

Repairing corrupted database

Anonymous (anonymous@undisclosed.example.com) — 2024-01-15T11:35:45+00:00

Repairing corrupted database With PostgreSQL (as with most high-end databases) the database system will automatically recover after power failures etc, if it can. If it can't then there is no manual 'repair' function, because the data cannot totally be recovered (or it would automatically have been recovered).

How to Restore a backup of VPOP3

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to Restore a backup of VPOP3 The instructions below are to restore a full backup. You may also be able to recover deleted messages if you do not need to restore a full backup. Version 5 or later If you just need to restore a database backup, see steps 4 to 7 below.

Move VPOP3 Version 3 or 4 to a new PC

Anonymous (anonymous@undisclosed.example.com) — 2019-11-12T16:09:08+00:00

Move VPOP3 Version 3 or 4 to a new PC Moving VPOP3 Version 3 or 4 to a new PC is slightly different from moving earlier versions, because of the database system. The summary of steps is: * Stop VPOP3 on the original PC * Manually make a backup of the database on the original PC

Move VPOP3 Version 5 (or later) to a new PC

Anonymous (anonymous@undisclosed.example.com) — 2026-04-21T11:12:40+00:00

Move VPOP3 Version 5 (or later) to a new PC Moving VPOP3 Version 5 or later to a new PC is slightly different from moving earlier versions, because of the database system, which was introduced for version 3 and modified for version 5. The summary of steps is: * Stop VPOP3 on the original PC

How To Setup VPOP3 Service Security

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How To Setup VPOP3 Service Security VPOP3 can be configured to restrict access to its various services depending on the client computer's IP address. This is useful if you want to allow access from only certain IP addresses (eg within your LAN) and prevent access from other IP addresses (eg the Internet).

Configuring Calendar on iOS

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Configuring Calendar on iOS These instructions are for configuring a new Calendar account on iOS for iPhone, iPad and iPod Touch. The version of iOS used for these instructions is iOS v6.0, but they will probably work or help with other versions of iOS.

Database Maintenance

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Database Maintenance VPOP3 uses the PostgreSQL database server for most of its data storage. Normally this will not require any special maintenance, because it will manage itself. To do any special database maintenance you will need to close down VPOP3 first, because PostgreSQL needs exclusive access to the database to perform any operations such as decreasing the size of database files. Note that these operations may take some time! There are some PostgreSQL utility programs in the VPOP3\pgs…

How to send a fax by email using the VPOP3 FaxServer

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to send a fax by email using the VPOP3 FaxServer VPOP3 2.1.0 and later together with the VPOP3 FaxServer software allows you to send specially crafted emails to VPOP3 to have them sent as faxes. To do this, send an email to fax@ . The email subject will be the subject of the fax used on the fax cover page. The email should be in plain text (not

How to filter attachments

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to filter attachments VPOP3 can filter attachments in several ways. The most general is to use the Settings -> Attachment Processing -> Filtering tab as described below. VPOP3 can also filter attachments using the content/spam filter, or by using an integrated virus scanner.

Initial User

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Initial User When you install VPOP3 it will ask you to create an initial user. This counts towards your user count and is created as your initial administrator account. More administrator accounts can be created later if you wish, and you can remove the initial user if you wish.

How to Install VPOP3

Anonymous (anonymous@undisclosed.example.com) — 2021-03-08T10:48:40+00:00

How to Install VPOP3 Simply download VPOP3 from the website, and run the installation program and follow the prompts. Occasionally people may have problems with the PostgreSQL part of the installation. If that happens, please contact us either by email at support@pscs.co.uk or by phone to +44 (0)1484 855800, and we will do our best to help.

Timeout problems downloading/uploading messages with attachments

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Timeout problems downloading/uploading messages with attachments There are various possible reasons for this, usually to do with third party internet security software but they may also be associated with Windows TCP/IP or dial-up adapter issues. You may not have problems with other software, but that doesn't mean the problem is being caused by VPOP3.

Using VPOP3 with Microsoft Exchange Server

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Using VPOP3 with Microsoft Exchange Server You can link VPOP3 to Exchange Server, so that Exchange Server sends outgoing mail through VPOP3 and VPOP3 sends any incoming mail directly to Exchange Server. You should first of all set up VPOP3 to send and receive Internet email as described in the online help.

VPOP3 is using a lot of disk space

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

VPOP3 is using a lot of disk space If VPOP3 is using a lot of disk space, the problem is usually that there is lots of data there, so it has to use the disk space. Message Storage In VPOP3 version 5 and later, all users' messages are stored in the database, so they will occupy space in the VPOP3\pgsql\data folder.

450 4.3.2 Content Filter Timeout

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

450 4.3.2 Content Filter Timeout If you get this error appearing when messages are sent to VPOP3, either in a bounce message, or in the VPOP3 status monitor, it means that the VPOP3 computer filter is taking more than the allowed amount of time (usually 60 seconds).

Backscatter

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Backscatter In email, “backscatter” is the term used if you send bounce messages back to spam messages. As most spam messages use forged email addresses, then the bounce messages will go to an innocent person, who will find them very annoying. Stopping VPOP3 from sending Backscatter

Copy Outgoing mail

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Copy Outgoing mail Sometimes people need to copy outgoing mail for various reasons. There are several ways of doing this in VPOP3 depending on your exact requirements: * Message Monitoring - this copies all outgoing, incoming and/or internal mail sent by/to specific users to another specific user

Custom filtering incoming mail

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Custom filtering incoming mail If you want to filter incoming mail using custom rules there are a few ways of doing this, depending on your exact requirements. * Download rules - if your incoming mail is via POP3 collection, you want to filter on headers, size etc (not contents)

Data stream contained NUL character

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Data stream contained NUL character Description of the problem NUL characters (bytes with value 0) are not allowed in email messages and should not be transmitted over POP3, SMTP or IMAP4 except in certain circumstances. If an attachment contains such a byte it must be encoded using

Exceptions

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Exceptions An exception happens if VPOP3 encounters a problem it did not expect. In some cases it can recover automatically, but in other cases that isn't possible. Common causes VPOP3 2.6 and earlier In VPOP3 2.6 and earlier it was quite common for there to be database corruption problems with the SQLite database which was used in those versions.

French Webmail Language File

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

French Webmail Language File Copy/paste the text below to a file 'french.lng' or 'francais.lng' in the VPOP3 directory. (French users, feel free to update/correct the text below) #login page logintitle=VPOP3 Login webadminlogin=web admin login webmaillogin=web mail login enterusername=You must specify your VPOP3 username here bookmarksnotsupported=I'm sorry, but your web browser does not support this function. You will have to add this page to your bookmarks manually. loginfailed=Login Faile…

German Webmail Language Page

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

German Webmail Language Page Copy/paste the text below to a file 'german.lng' in the VPOP3 directory. (German users, feel free to update/correct the text below) #login page logintitle=VPOP3 Login webadminlogin=web admin login webmaillogin=Webmail Anmeldung enterusername=Sie müssen einen Benutzernamen angeben bookmarksnotsupported=I'm sorry, but your web browser does not support this function. You will have to add this page to your bookmarks manually. loginfailed=Anmeldung fehlgeschlagen …

How to Obtain Error Logs

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to Obtain Error Logs As part of diagnosing a support issue our support team may ask you to send them various log files. This page explains how to obtain the right files at the right time. How Logging Works Under its default settings VPOP3 logs a minimal amount of information about what it is doing to various files in the main VPOP3 directory. When investigating a support issue it is often the case that we will need you to switch on logging to extra files or increase the level of detail be…

Obtaining Windows Event Log

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Obtaining Windows Event Log Sometimes, the VPOP3 technical support team may need to see entries from the Windows Event log, especially those relating to VPOP3 or the PostgreSQL service. If there are too many entries simply to copy, you can save them to a file to email to technical support.

VPOP3 - POP3 Client Problem

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

VPOP3 - POP3 Client Problem These errors occur whilst VPOP3 is communicating with your ISP's POP3 mail server to retrieve your mail. The server connection was closed unexpectedly If the message text is Error with Pop3 Client (XXXX (YY)) The server connection was closed unexpectedly

Problems accessing VPOP3 Settings

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Problems accessing VPOP3 Settings If you have problems accessing the VPOP3 settings: * Go to Start -> Programs -> VPOP3 -> Configure VPOP3 on the VPOP3 computer. That should open up a web browser and take you to the login page * If VPOP3 doesn't show the login page, and shows a '403' error page instead, that means that the access restrictions for the WebMail service have been restricted so that this computer cannot access the WebMail service.

Restore a database backup

Anonymous (anonymous@undisclosed.example.com) — 2025-12-17T09:19:40+00:00

Restore a database backup By default VPOP3 makes a daily backup of the VPOP3 database to a file 'DBBACK-n.DMP' in the VPOP3 installation directory (it is possible to change this in the settings). These are cycled on a weekly basis so you will usually have the last seven days' worth of backups. These can be useful if the database gets damaged somehow.

Seeing where a message came from

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Seeing where a message came from Sometimes you need to check to see where a message really came from. The 'From:' email address is easily forged, so that cannot be relied upon. The first thing you have to do is to get the full message headers. These may look daunting, but are very useful for problem diagnosis.

How to Set a User as Administrator

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to Set a User as Administrator VPOP3 has two 'types' of administrator. * Users who can administer VPOP3, and log in and change settings etc. These are normal users, but have the Administrator box checked on the User -> General settings for that user. These user have a red key icon in the users list.

VPOP3 - SMTP Client Problem

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

VPOP3 - SMTP Client Problem These errors occur whilst VPOP3 is communicating with your ISP's SMTP mail server to send your mail. If the message text is: Error with SMTP Client (XXXX (YY)) The server connection was closed unexpectedly Then this means that the the connection between VPOP3 and your ISP's SMTP mail server was closed when VPOP3 did not expect it to be. This can be caused by the network connection failing or a bug in the ISP's mail server which drops the connection in abnormal circ…

VPOP3 Not Starting Properly

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

VPOP3 Not Starting Properly If VPOP3 is not starting properly, then the first thing to check is whether the database server is starting. In VPOP3 v3 and later, VPOP3 uses a PostgreSQL Database server for data storage, so if the database server is not running, VPOP3 will not be able to start properly. In this case, the VPOP3.EXE process may appear in Task Manager, but it won't respond to anything, or it may appear in Task Manager and then stop after a short period.

421 4.3.2 VPOP3 Too many connections from your IP address - try later

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

421 4.3.2 VPOP3 Too many connections from your IP address - try later If you see this error message when you are sending messages, then it means that VPOP3 has detected too many simultaneous connections from your IP address. This would usually happen if the sender is another mail server as they can make many simultaneous connections when there are lots of messages to send. The error code that VPOP3 gives means that the sender should try sending the messages later, so it should be possible to e…

550/553 Not Permitted error from BT Internet's mail servers

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

550/553 Not Permitted error from BT Internet's mail servers BT Internet's mail servers only allow messages to be sent from 'approved' email addresses. If you try to send messages from other addresses BT's mail servers may return a '550 Not Permitted' error, a '553' error, or may silently discard the message depending on what their server feels like doing today.

552 5.2.3 Message too large - contact your administrator

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

552 5.2.3 Message too large - contact your administrator Or 552 5.2.3 Message exceeds fixed maximum message size If this error message is coming from VPOP3 when you are sending a message, it means that the message you are sending is prohibited by your VPOP3 settings. There are two places where the size limit could be set.

Socket Error 10054 - The virtual circuit was reset by the remote end

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Socket Error 10054 - The virtual circuit was reset by the remote end Error 10054 means that the connection between VPOP3 and a remote computer (eg the ISP or another computer on your LAN) was disconnected by something outside of VPOP3. This is often caused by anti-virus software or Internet security/firewall on the VPOP3 machine but it could be any of a number of things. Any software or hardware that is sitting between VPOP3 and the ISP could be the root cause.

Allow Remote Access to VPOP3 Mailboxes

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Allow Remote Access to VPOP3 Mailboxes Sometimes people want to be able to access their office VPOP3 mail server from a remote site or mobile phone etc. These instructions assume you have a permanent Internet connection (eg ADSL, Cable etc). If you don't have a permanent Internet connection, see

How To Allow Mail Relay Through VPOP3

Anonymous (anonymous@undisclosed.example.com) — 2025-05-21T07:57:18+00:00

How To Allow Mail Relay Through VPOP3 If you are allowing remote access into VPOP3 to collect mail then you may also want those remote users to be able to send their outgoing mail through VPOP3 as well. This is more complex than allowing users to collect mail, because, by default, SMTP connections are not authenticated. This means that when someone tries to send a message through VPOP3, VPOP3 doesn't know who that user is. This can cause a problem if unauthorised users try to send mail through…

Avast for VPOP3 Error Codes

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Avast for VPOP3 Error Codes Error codes from the avast! for VPOP3 virus scanner are below. Usually these can be safely ignored as they refer to things such as corrupt files being scanned. * 42110 - decompression bomb found during scan * 42126 - corrupted RAR archive file found during scan

C++ Error Popup

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

C++ Error Popup If VPOP3 crashes with a C++ error popup window, that means that an 'exception' has been thrown - something unusual has happened, and VPOP3 doesn't know how to recover automatically. Often these are due to database errors. There are two places you can look for the cause of the error:

Calendars

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Calendars To use the calendar facility in VPOP3 you need a CalDAV aware client. We have tested it with the free Mozilla Sunbird & Lightning products as well as the emClient email client. These products need a URL to be able to access the CalDAV data store. Once you have the URL (see below), copy it into the

Compatibility with SpamPal

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Compatibility with SpamPal Some users have reported a problem installing/running the PostgreSQL component when the 'SpamPal SMTP Transparent Feature' is enabled. Disabling this feature has resolved the problem for these users. Unfortunately we don't have further information on this, as we don't use SpamPal ourselves, but the above information may be useful if you have this problem.

Configure SRS

Anonymous (anonymous@undisclosed.example.com) — 2025-08-18T15:28:11+00:00

Configure SRS In VPOP3 8.8 and later, you can use Lua scripting to implement 'SRS' (Sender Rewriting Scheme') in VPOP3 This involves adding a couple of functions to rewrite outgoing return paths in 'relayout.lua' or 'mxout.lua' as appropriate and a couple of functions to redirect rewritten bounce message recipients in 'smtpsvr.lua'

Database & Disk Caching

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Database & Disk Caching Disk Caching One key point is that, like all other high-end databases, PostgreSQL should not be run on a server with disk level write back caching. With write back caching, the disk will report data as being written to disk when it is still in the disk's cache memory. If the power then fails, this data is lost and can cause database corruption. As long as the database server really knows when the data has been written to disk, power failure will not cause database corru…

Error 0x80040201 when sending mail in Outlook

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Error 0x80040201 when sending mail in Outlook Often this is because there is 'Read Receipt' stuck in the Outlook out queue, but these do not show in the Outlook Outbox view. We found this article helpful: If you need help with following this, you can call us, but it

Error Messages

Anonymous (anonymous@undisclosed.example.com) — 2025-10-06T15:21:37+00:00

Error Messages This is the place to look if you are trying to trouble shoot a problem and you have received or have access to a specific error message or error code. If instead your problem is that something you think is set up correctly is not working then the best place to look would be the

Full Text Search

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Full Text Search In VPOP3 Enterprise v7.0 a facility for full-text-search on message content was added. Because the full-text-search indexes can be quite big, this facility is optional. For several reasons, the full-text-search is stored in a separate PostgreSQL database. This means that it is not backed up with your standard backups. After a restore, the full-text-search index can be rebuilt from the raw message content.

Inbox size is zero but mailbox size is not zero

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Inbox size is zero but mailbox size is not zero In the VPOP3 settings sometimes, on the user account list the “Inbox Count” is shown as zero, but the “Mailbox Size” is not zero. This is not a bug, or mistake - the two figures are showing different things.

Installation checklist

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Installation checklist This list contains some things you may want to check before or after installing VPOP3 to make sure it's not going to encounter any common issues. Before installation * Make sure that VPOP3 is not installed on a RAID 5 or RAID 6 array.

Internationalisation

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Internationalisation VPOP3 has two places where internationalisation can be carried out. In the VPOP3 directory on the server are some *.LNG files. These are language files for the WebMail interface. You can create a new language file by copying the ENGLISH.LNG to another file, eg FRANCAIS.LNG, and then use a text editor (eg Notepad) to edit the text strings in there (the text after the '=' on each line

Internet Explorer 10 Issues

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Internet Explorer 10 Issues If you are using IE10 with VPOP3 prior to v6.2, then you may have issues accessing the VPOP3 Webmail and/or admin settings. These can usually be solved by telling IE10 to use 'compatibility mode'. Alternatively, using another web browsers such as

Setting up an iPhone/iPad/iPod Touch

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Setting up an iPhone/iPad/iPod Touch To set up an iPhone to access VPOP3's mail, you first of all need to configure VPOP3 to allow access by remote users (unless you will only be using the iPhone in the office, connected via WiFi to the office LAN). Adding the mail account to your iPhone/iPad

The ISP needs SMTP Authentication

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

The ISP needs SMTP Authentication If your ISP needs you to use SMTP authentication when sending mail to them, then you just need to tell VPOP3 to use authentication when sending. Click the Mail Connectors button at the top of the page, then click on the relevant

ISP needs SSL connection

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

ISP needs SSL connection A few ISPs use a non-standard and not recommended system of encrypting connections to their SMTP mail servers. These generally are called 'SSL' connections and work on an alternate port other than the standard SMTP port 25. (The correct way to encrypt connections is to use a system called TLS which works on the standard SMTP port).

Locked Accounts

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Locked Accounts VPOP3 has a security feature which will lock out an account after it has had several failed login attempts. This feature is to make it harder for an attacker to use a brute force or dictionary password attack on an account. The default settings are that after more than 3 attempts to log into an account with an incorrect password, VPOP3 will lock the account for 30 minutes. You can change these settings on the

How to configure Mozilla Thunderbird

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to configure Mozilla Thunderbird This article won't show you all the possible settings in Thunderbird, because there are so many. Thunderbird is one of the most powerful & flexible email clients available at the time of writing, especially if you use IMAP4 (with VPOP3 Enterprise).

MX Send Warning - .....

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

MX Send Warning - ..... If you see the text 'MX Send Warning - ' in the VPOP3 status monitor, that means that VPOP3 is trying to send a message to another mail server using the MX send method (direct to the recipient's mail server) and

Performance Requirements

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Performance Requirements The performance requirements for VPOP3 depends on many factors, so we can't give specific details for any scenario. How to detect limiting factors * Use the Windows Performance Monitor (perfmon.msc) * Add counters for:

VPOP3 - POP3 Client Connection Problem

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

VPOP3 - POP3 Client Connection Problem These errors occur during the period when VPOP3 is trying to establish a connection to your ISP's POP3 mail server to receive incoming mail. They can mean that you have entered the POP3 Server address incorrectly, or that there is a problem with the network, or that your ISP's mail server is not working properly.

PostgreSQL Replication

Anonymous (anonymous@undisclosed.example.com) — 2019-02-06T17:10:31+00:00

PostgreSQL Replication PostgreSQL 9.1 (used in VPOP3 5 and later) supports replication from a 'Master' to a 'Slave' database server. This can be used with VPOP3 for having a near-realtime backup of your settings & messages. To use the replication, you need to have a file share which is accessible from both PCs. The thing to watch out for is that the PostgreSQL services may be running as a different user from the currently logged in user, so make sure that the user(s) which the PostgreSQL servi…

Recovering messages from corrupted database into fresh database

Anonymous (anonymous@undisclosed.example.com) — 2025-09-11T13:48:07+00:00

Recovering messages from corrupted database into fresh database If the VPOP3 message database is corrupted, then one option is to build a fresh database and restore the settings into it, then recover the messages from the old database using the 'Message Restore' function in VPOP3. This has minimal downtime, but old messages will not all be available until the restore has completed. New messages will be available quickly, and you will be able to send messages.

Restore selected mail folders or mailbox in VPOP3 v5 or later

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Restore selected mail folders or mailbox in VPOP3 v5 or later (This option is only available in VPOP3 Enterprise) First - if the problem is that messages were deleted very recently (the default is within 3 days), you can probably use the Undelete feature in VPOP3.

Restricting the number of recipients sent to

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Restricting the number of recipients sent to Some ISPs set restrictions on the number of recipients that you are allowed to send in a certain time period, eg 50 messages per hour, or the number of recipients that you are allowed to send per message or per connection.

Restricting the number of messages sent

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Restricting the number of messages sent Some ISPs set restrictions on the number of messages that you are allowed to send in a certain time period, eg 50 messages per hour, or the number of messages that you are allowed to send per connection. Restriction of messages per connection

Setup steps for multiple POP3 accounts at the ISP

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Setup steps for multiple POP3 accounts at the ISP * Set up all the local users you need in the 'Users' page in the VPOP3 settings. The usernames & passwords do not have to have any relation to the ISP's accounts. These are the details which the users will put in their email clients (eg Outlook) to collect their mail from VPOP3.

VPOP3 - SMTP Client Connection Problem

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

VPOP3 - SMTP Client Connection Problem These errors occur during the period when VPOP3 is trying to establish a connection to your ISP's SMTP mail server to send outgoing mail. They can mean that you have entered the SMTP Server address incorrectly, or that there is a problem with the network, or that your ISP's mail server is not working properly.

Some PCs cannot access VPOP3 when VPOP3 is connected to the Internet

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Some PCs cannot access VPOP3 when VPOP3 is connected to the Internet This error happens when you have multiple TCP/IP subnets on your network. The computers which are on different subnets from the VPOP3 computer will not be able to see VPOP3 whilst VPOP3 is connected to the Internet (through a dial-up connection). Whenever VPOP3 is offline, it will work correctly.

"Too many logins" error message

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

"Too many logins" error message VPOP3 version 4 and later have a limit on the number of concurrent logins which can be received for a single user or from a single IP address. This is to prevent a single user from bringing the server down. The current default limits are 20 per user, or 1000 per IP address (to allow multiple people sharing a NAT IP address)

Training the VPOP3 Spam Filter

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Training the VPOP3 Spam Filter The VPOP3 spam filter has a couple of mechanisms which can be used to 'train' it to distinguish between spam and not-spam. Bayesian Filter The Bayesian filter this looks at words in messages sent and received and their probabilities of being contained in spam and not-spam, and works out an overall probability of the message being spam or not-spam based on the combination of those probabilities.

VPOP3 Deleting messages as 'old' messages

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

VPOP3 Deleting messages as 'old' messages If VPOP3 says 'deleting old message' in the status window activity log that means that it has seen the unique ID of that message before, longer ago than the time specified for VPOP3 to leave messages on the server, so it thinks that the message is an old message, and so deletes it.

SMTP Relay Protection in VPOP3

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTP Relay Protection in VPOP3 SMTP Relay Protection should be used on ALL SMTP mail servers (such as VPOP3) which have a permanent connection to the Internet. You may also want to use it on servers which are only connected occasionally via a dial-up connection.

VPOP3 Server Access Not Allowed

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

VPOP3 Server Access Not Allowed If you get an error like: -ERR VPOP3 Server access not allowed! when trying to access VPOP3, then this means that the relevant server's IP Access Restrictions defined in VPOP3 do not allow access from your client computer.

What is the best practice to delete old messages from the VPOP3 archive folder?

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

What is the best practice to delete old messages from the VPOP3 archive folder? You should use the 'Offline' tab in the VPOP3 Message Archive settings to tell VPOP3 to move old messages into a ZIP file. You can then store this ZIP file somewhere safe in case you need to refer to it in the future. (If you know you won't want to ever refer to these old messages, you could just delete the ZIP file, but storage costs nowadays are so cheap, we'd recommend keeping it, just in case).

Spamfilter Whitelist & Blacklist

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spamfilter Whitelist & Blacklist The VPOP3 spamfilter has a whitelist and a blacklist for sender addresses. It also has a whitelist and blacklist for words/phrases. You can view these lists in the VPOP3 settings by going to Settings -> Spamfilter ->

Error message: Your connection has been blocked temporarily - Try again later

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Error message: Your connection has been blocked temporarily - Try again later If you get an error message in your email client software saying Your connection has been blocked temporarily - Try again later or Server access temporarily blocked! Please try again later