PSCS Wiki

v3/4 - Move the message store to a new folder/drive

Anonymous (anonymous@undisclosed.example.com) — 2018-12-05T15:25:24+00:00

v3/4 - Move the message store to a new folder/drive This guide assumes you want to just move the VPOP3 message store/database to a new folder on the same PC, and leave the VPOP3 installation directory where it is. * Stop VPOP3 * Stop PostgreSQL

How to move VPOP3 V3 to a new folder

Anonymous (anonymous@undisclosed.example.com) — 2018-12-05T15:25:41+00:00

How to move VPOP3 V3 to a new folder This guide assumes you want to move the whole of VPOP3 (including the message store) to a new folder on the same PC * Stop VPOP3 * Stop PostgreSQL * Remove the PostgreSQL service * Move VPOP3 to the new folder

v5 - Move the message store to a new folder/drive

Anonymous (anonymous@undisclosed.example.com) — 2019-11-12T16:10:42+00:00

v5 - Move the message store to a new folder/drive Here is an alternative method, which may be simpler, but only moves the data, not the whole database store (which is a subtle difference) This guide assumes you want to just move the VPOP3 message store/database to a new folder on the same PC, and leave the VPOP3 installation directory where it is.

How to move VPOP3 V5+ to a new folder

Anonymous (anonymous@undisclosed.example.com) — 2021-03-19T16:01:48+00:00

How to move VPOP3 V5+ to a new folder This guide assumes you want to move the whole of VPOP3 (including the message store) to a new folder on the same PC * Stop VPOP3 * Stop VPOP3DB * Remove the VPOP3DB service * Move VPOP3 to the new folder

Full Text Search

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Full Text Search In VPOP3 Enterprise v7.0 a facility for full-text-search on message content was added. Because the full-text-search indexes can be quite big, this facility is optional. For several reasons, the full-text-search is stored in a separate PostgreSQL database. This means that it is not backed up with your standard backups. After a restore, the full-text-search index can be rebuilt from the raw message content.

PostgreSQL Replication

Anonymous (anonymous@undisclosed.example.com) — 2019-02-06T17:10:31+00:00

PostgreSQL Replication PostgreSQL 9.1 (used in VPOP3 5 and later) supports replication from a 'Master' to a 'Slave' database server. This can be used with VPOP3 for having a near-realtime backup of your settings & messages. To use the replication, you need to have a file share which is accessible from both PCs. The thing to watch out for is that the PostgreSQL services may be running as a different user from the currently logged in user, so make sure that the user(s) which the PostgreSQL servi…

Recovering messages from corrupted database into fresh database

Anonymous (anonymous@undisclosed.example.com) — 2025-09-11T13:48:07+00:00

Recovering messages from corrupted database into fresh database If the VPOP3 message database is corrupted, then one option is to build a fresh database and restore the settings into it, then recover the messages from the old database using the 'Message Restore' function in VPOP3. This has minimal downtime, but old messages will not all be available until the restore has completed. New messages will be available quickly, and you will be able to send messages.

Spam Filter Rules: *STOP

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spam Filter Rules: *STOP Statement *STOP Version 2.2.5+ Purpose Stops the parsing of the current spam filter script file The statements after the *STOP statement are not parsed, so will not cause syntax errors if they involve unrecognised commands.

Spam Filter Rules: Stop

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spam Filter Rules: Stop Statement Stop Version 2.1.7+ Purpose Stop processing the spam rules Example # Statements Stop # The script has stopped processing before it gets to this line

Database Maintenance

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Database Maintenance VPOP3 uses the PostgreSQL database server for most of its data storage. Normally this will not require any special maintenance, because it will manage itself. To do any special database maintenance you will need to close down VPOP3 first, because PostgreSQL needs exclusive access to the database to perform any operations such as decreasing the size of database files. Note that these operations may take some time! There are some PostgreSQL utility programs in the VPOP3\pgs…

Restore a database backup

Anonymous (anonymous@undisclosed.example.com) — 2025-12-17T09:19:40+00:00

Restore a database backup By default VPOP3 makes a daily backup of the VPOP3 database to a file 'DBBACK-n.DMP' in the VPOP3 installation directory (it is possible to change this in the settings). These are cycled on a weekly basis so you will usually have the last seven days' worth of backups. These can be useful if the database gets damaged somehow.

Move VPOP3 Version 3 or 4 to a new PC

Anonymous (anonymous@undisclosed.example.com) — 2019-11-12T16:09:08+00:00

Move VPOP3 Version 3 or 4 to a new PC Moving VPOP3 Version 3 or 4 to a new PC is slightly different from moving earlier versions, because of the database system. The summary of steps is: * Stop VPOP3 on the original PC * Manually make a backup of the database on the original PC

Move VPOP3 Version 5 (or later) to a new PC

Anonymous (anonymous@undisclosed.example.com) — 2026-04-21T11:12:40+00:00

Move VPOP3 Version 5 (or later) to a new PC Moving VPOP3 Version 5 or later to a new PC is slightly different from moving earlier versions, because of the database system, which was introduced for version 3 and modified for version 5. The summary of steps is: * Stop VPOP3 on the original PC

VPOP3 Not Starting Properly

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

VPOP3 Not Starting Properly If VPOP3 is not starting properly, then the first thing to check is whether the database server is starting. In VPOP3 v3 and later, VPOP3 uses a PostgreSQL Database server for data storage, so if the database server is not running, VPOP3 will not be able to start properly. In this case, the VPOP3.EXE process may appear in Task Manager, but it won't respond to anything, or it may appear in Task Manager and then stop after a short period.

Spam Filter Rules

Anonymous (anonymous@undisclosed.example.com) — 2023-01-18T15:57:13+00:00

Spam Filter Rules VPOP3 Versions 2.1.7 and later have a built-in spam filter system which supports a simple script language optimised for content- and spam-filtering of email messages. This reference contains a definition of the spam filtering script language supported by VPOP3. Note that as later versions of VPOP3 are released, more language features may be added, so this reference indicates in which version of VPOP3 a particular feature was added.

Backscatter

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Backscatter In email, “backscatter” is the term used if you send bounce messages back to spam messages. As most spam messages use forged email addresses, then the bounce messages will go to an innocent person, who will find them very annoying. Stopping VPOP3 from sending Backscatter

Repairing corrupted database

Anonymous (anonymous@undisclosed.example.com) — 2024-01-15T11:35:45+00:00

Repairing corrupted database With PostgreSQL (as with most high-end databases) the database system will automatically recover after power failures etc, if it can. If it can't then there is no manual 'repair' function, because the data cannot totally be recovered (or it would automatically have been recovered).

How to stop VPOP3

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to stop VPOP3 You can stop VPOP3 by going to the Services applet in Windows, find the VPOP3 Email Server service and stop it, or, if you have the VPOP3 status monitor running with appropriate permissions, you can right-click that and choose 'Shutdown Server'

Message Rules

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Message Rules The Edit User -> Message Rules tab can be used to create/edit rules which are processed when messages arrive in a User's mailbox. They can be used to copy messages, mark them as read, delete them, etc VPOP3 will process Message Rules in the order they appear in the list. If you want to change the order of the rules, you can drag & drop them into the correct order. Usually when VPOP3 has processed a rule, it will go on to check further rules, but you can use the

UserRuleActions Replacement

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

UserRuleActions Replacement Use: ~userruleactions~ ~end~ Required parameter: Account, RuleId This returns the message rule actions for the specified rule The format string can have the replacements * id - numeric ID of the action * type - action type

Windows Server Port Conflicts

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Windows Server Port Conflicts LDAP Server Conflict When you run VPOP3 on a server edition of Windows you may receive an error saying LDAP server not started - couldn't bind socket port 389 (10048) This error happens because VPOP3 contains an LDAP (Lightweight Directory Access Protocol) server for its global address book functionality, and the Windows 2000/2003 'Active Directory Service' also uses LDAP as its mechanism. These two services are conflicting.

550 5.7.1 Unable to Relay for...

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

550 5.7.1 Unable to Relay for... When trying to send emails from your email client software you get an error in your email client 550 5.7.1 Unable to relay for ... This error is happening because you have installed the Microsoft IIS SMTP Service, and your email client is talking to that service rather than to VPOP3.

Socket Error 10053 - An established connection was aborted by the software in your host machine.

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Socket Error 10053 - An established connection was aborted by the software in your host machine. Error 10053 means that an established connection has been dropped. There are three descriptions of this error message we know about, but the descriptions are given by Windows, so they may vary depending on your version of Windows:

Mail Not Downloading From ISP

Anonymous (anonymous@undisclosed.example.com) — 2026-04-06T17:59:47+00:00

Mail Not Downloading From ISP This normally happens because you have told VPOP3 to Leave Messages On Server (on the Mail Connectors -> Mail Collectors -> (name) -> POP3 General tab). If you do this, VPOP3 will leave messages on the ISP's mail server for several days, and remember that it has already downloaded them. Then, the next time it connects it will see that there are some messages waiting, but it may find that it has already downloaded them, so it won't download them again.

How to remove messages from the outbound queue

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to remove messages from the outbound queue To delete messages from the VPOP3 'OutQueue': * log into the VPOP3 settings * go to the Users page * click on the OutQueue entry in the accounts list. This will show you a list of all the messages waiting to be sent by VPOP3

VPOP3 Status Service Disabled

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

VPOP3 Status Service Disabled In some versions of VPOP3, occasionally the Status Service may get disabled if there was a problem during initialisation - this will prevent the VPOP3 Status Monitor from connecting to VPOP3. To check this, run RegEdit, and find

How to move the VPOP3 Message Store to a new PC

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to move the VPOP3 Message Store to a new PC Use this option if you want to have VPOP3 running on one PC, but have the message store database on another PC. Manually Install PostgreSQL on the new PC Download the 'pgInstaller' version of PostgreSQL from the

UserRuleActions Replacement

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

UserRuleActions Replacement Use: ~userruleactions~ ~end~ Required parameter: RuleId This returns the message rule actions for the specified rule The format string can have the replacements * id - numeric ID of the action * type - action type

ListServer Commands

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

ListServer Commands The ListServer is an automated process in VPOP3 which manages mailing lists. People can send commands to the ListServer to perform various functions remotely. Whether these commands are allowed, and exactly how they work depends on the particular mailing list's settings.

Reset Message Folder Counts

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Reset Message Folder Counts In extremely rare cases, the mail folder message counts in the database may get out of step with the actual stored messages. There are database triggers which will keep the counts in sync during normal operation, but if you have to manipulate the database directly (eg to recover from a corrupted database) it is possible that they will get out of step.

Mail Connectors -> Connector Schedule

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Mail Connectors -> Connector Schedule The Connector Schedule tells VPOP3 when to connect to send mail using Mail Senders and collect mail using Mail Collectors. It does not affect incoming SMTP over a permanent connection, or LAN Forwarding. The connection schedule also tells VPOP3 when to check for updates to the

SMTP Direct Sender Settings

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTP Direct Sender Settings Mail Connectors -> Mail Senders -> SMTP Direct Sender -> Settings tab The SMTP Direct Settings tab lets you set how VPOP3 will send mail using SMTP Direct DNS Servers to Use This setting tells VPOP3 the IP addresses of the DNS servers it should use to find the recipients' mail servers. Separate multiple addresses with commas.

Spamfilter Script Configuration tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spamfilter Script Configuration tab You reach this tab by going to Settings --> Spam Filter -> General, and then choose the General tab. The Spamfilter script has various settings that can be changed to alter the behaviour of the spamfilter. These are defined in the script, so may change with different versions of the script. The settings are currently:

What is the VPOP3 Antivirus solution?

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

What is the VPOP3 Antivirus solution? “VPOP3 Antivirus” is a new product to replace the avast! for VPOP3 product which will no longer be supported after the end of 2012. VPOP3 Antivirus uses the popular 'ClamAV' virus scanner to scan incoming and outgoing messages for viruses.

421 4.3.2 VPOP3 SMTP Server access disabled - content scanner problem!

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

421 4.3.2 VPOP3 SMTP Server access disabled - content scanner problem! This usually happens if the “VPOP3 AV” virus scanner has a problem it can't automatically recover from. This may be a fatal error, or a licencing issue. You can check this on the Settings

450 4.3.2 Content Filter Timeout

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

450 4.3.2 Content Filter Timeout If you get this error appearing when messages are sent to VPOP3, either in a bounce message, or in the VPOP3 status monitor, it means that the VPOP3 computer filter is taking more than the allowed amount of time (usually 60 seconds).

VPOP3 Webmail/admin service and/or Status service is not listening on correct IP addresses or ports

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

VPOP3 Webmail/admin service and/or Status service is not listening on correct IP addresses or ports Sometimes, VPOP3 can be configured so that the Webmail/admin service, or Status service is not listening on the correct IP addresses or ports. This can be hard to fix through normal methods, since you may not be able to get into the settings to change the settings.

Data stream contained NUL character

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Data stream contained NUL character Description of the problem NUL characters (bytes with value 0) are not allowed in email messages and should not be transmitted over POP3, SMTP or IMAP4 except in certain circumstances. If an attachment contains such a byte it must be encoded using

Delete OutQueue messages directly from the database

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Delete OutQueue messages directly from the database If there is an extremely large number of messages (eg hundreds of thousands) in the VPOP3 OutQueue, then it may take a very long time for VPOP3 v5 and later to start as it check the message database tables for consistency during initialisation.

"Error Sending Message After Authentication" in Webmail

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

"Error Sending Message After Authentication" in Webmail If you get an error while sending a message using Webmail, such as “Error sending message after authentication - error 0 - text 502 Error: command not implemented” this means that you have another SMTP server running on the VPOP3 computer, and when the VPOP3 Webmail service tries to send the message it is sending it to this other SMTP server, rather than to the VPOP3 server. The Webmail service uses internal commands which the other SMTP…

Exceptions

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Exceptions An exception happens if VPOP3 encounters a problem it did not expect. In some cases it can recover automatically, but in other cases that isn't possible. Common causes VPOP3 2.6 and earlier In VPOP3 2.6 and earlier it was quite common for there to be database corruption problems with the SQLite database which was used in those versions.

Setting up VPOP3 to work with Exchange 2003

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Setting up VPOP3 to work with Exchange 2003 The instructions below are for Exchange Server 2003. For other versions of Exchange see here. You can link VPOP3 to Exchange Server, so that Exchange Server sends outgoing mail through VPOP3 and VPOP3 sends any incoming mail directly to Exchange Server.

Exchange 2007

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Exchange 2007 You can link VPOP3 to Exchange Server, so that Exchange Server sends outgoing mail through VPOP3 and VPOP3 sends any incoming mail directly to Exchange Server. You should first of all set up VPOP3 to send and receive Internet email as normal.

Handling mail for multiple incoming domains

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Handling mail for multiple incoming domains VPOP3 can easily handle mail for several incoming domains. Exactly how you do it depends on the exact situation. All domains are 'aliases' If the domains are aliases of each other, for instance, you have 'mycompany.com' and 'mycompany.org', both of which are the same, so each address at mycompany.com also exists at mycompany.org, and the emails go to the same people regardless of which domain is used, then you simply configure the domains in the ma…

"How To" Articles

Anonymous (anonymous@undisclosed.example.com) — 2026-03-18T20:20:50+00:00

"How To" Articles Installation/Upgrades * Download VPOP3 * Install VPOP3 * Move VPOP3 * Upgrade VPOP3 * Upgrade VPOP3 to version 5.x or 6.x from version 4 or earlier * Upgrade VPOP3 to version 7.x from version 6 or earlier * Upgrade VPOP3 to version 8.x from version 7 or earlier * Upgrade VPOP3 to version 9 or later from version 7 or 8 * Performance Requirements * Installation Checklist General Configuration * Initial Configuration * Users * Add an Alias * Create…

Installation conficts

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Installation conficts During installation, the installer program does some basic checks for conflicting software. This is software which is providing the same services as the VPOP3 software - i.e. SMTP, POP3 and/or LDAP services. For POP3/SMTP it will show the text which the conflicting software announces itself as.

Is it possible to stop messages that VPOP3 downloads from being marked as read?

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Is it possible to stop messages that VPOP3 downloads from being marked as read? VPOP3 does not mark messages as read when it downloads them. In fact, the POP3 protocol doesn't have a system available for marking messages as read, so it is impossible for VPOP3 to mark messages as read.

How to limit size of sent mail

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to limit size of sent mail There are several ways to limit the size of mail which can be sent * Limit the size of mail accepted by the SMTP component of VPOP3 * Limit the size sent for a particular user * Limit size based on 'rules' * Limit size based on

Move the message store - alternative method

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Move the message store - alternative method This method moves the database data storage location, but not the whole database. This means that the database configuration, logs, transaction logs etc are still stored in the VPOP3\pgsql\data folder, but the actual database tables & indexes are stored in the new location. This may be simpler, but, depending on your requirements,

How to move messages between users

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to move messages between users There are several ways to do this, depending on your exact needs Via Administrator Console You can view a user's 'Inbox' messages by clicking on the message count on the Users list, then select the messages, choose the target user, and press the

How to configure Mozilla Thunderbird

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to configure Mozilla Thunderbird This article won't show you all the possible settings in Thunderbird, because there are so many. Thunderbird is one of the most powerful & flexible email clients available at the time of writing, especially if you use IMAP4 (with VPOP3 Enterprise).

Not Working As Expected

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Not Working As Expected This is the page to come to if you think you've set something up correctly but it isn't doing what you think it should be doing. If you're getting an error message or some other concrete indication that something has actually 'gone wrong' then the

Outlook / Outlook Express is sending mail repeatedly

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Outlook / Outlook Express is sending mail repeatedly If you are using Outlook or Outlook Express you may occasionally find that mail is being sent repeatedly. There are a couple of possible reasons for this which we know of Sending taking too long

POP3/Webmail/IMAP4 can't see a user's messages, but the administrator can

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

POP3/Webmail/IMAP4 can't see a user's messages, but the administrator can Version 2.x only. This problem does not occur with version 3 or later. This problem can happen if the user's message index database has become damaged. The POP3, Webmail & IMAP4 services get the message summary data from the database, whereas the administrator console gets the message information directly from the message files on the disk, so if the database is corrupted, the administrator console can still see the mess…

Problems accessing VPOP3 Settings

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Problems accessing VPOP3 Settings If you have problems accessing the VPOP3 settings: * Go to Start -> Programs -> VPOP3 -> Configure VPOP3 on the VPOP3 computer. That should open up a web browser and take you to the login page * If VPOP3 doesn't show the login page, and shows a '403' error page instead, that means that the access restrictions for the WebMail service have been restricted so that this computer cannot access the WebMail service.

Restore selected mail folders or mailbox in VPOP3 v5 or later

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Restore selected mail folders or mailbox in VPOP3 v5 or later (This option is only available in VPOP3 Enterprise) First - if the problem is that messages were deleted very recently (the default is within 3 days), you can probably use the Undelete feature in VPOP3.

"Too many logins" error message

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

"Too many logins" error message VPOP3 version 4 and later have a limit on the number of concurrent logins which can be received for a single user or from a single IP address. This is to prevent a single user from bringing the server down. The current default limits are 20 per user, or 1000 per IP address (to allow multiple people sharing a NAT IP address)

Total Rebuild of Database

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Total Rebuild of Database If you suspect database corruption, sometimes the best thing to do is to totally rebuild the database. This involves six steps: * Stop VPOP3 * Backup Database * Delete Database * Re-create Database * Restore/Create Database

How to upgrade VPOP3 to version 7 or later from version 6 or earlier

Anonymous (anonymous@undisclosed.example.com) — 2020-06-29T10:43:58+00:00

How to upgrade VPOP3 to version 7 or later from version 6 or earlier As usual the process to upgrade is simply to install the later version over your existing installation (do not uninstall anything first). The below is technical information detailing an extra step performed by the installer in this particular upgrade step.

Upgrading PostgreSQL Database Software

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Upgrading PostgreSQL Database Software To upgrade the PostgreSQL database software used by VPOP3 * stop VPOP3 * backup the database () * uninstall PostgreSQL (from within Windows) if necessary * rename the VPOP3\pgsql folder to something else

Using VPOP3 with Microsoft Exchange Server

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Using VPOP3 with Microsoft Exchange Server You can link VPOP3 to Exchange Server, so that Exchange Server sends outgoing mail through VPOP3 and VPOP3 sends any incoming mail directly to Exchange Server. You should first of all set up VPOP3 to send and receive Internet email as described in the online help.

VPOP3 2.x crashes when user tries to download mail

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

VPOP3 2.x crashes when user tries to download mail If VPOP3 2.x crashes when a user tries to download mail, there are a few possible causes we know of: * A virus scanner or Internet security software is interfering with the connection between VPOP3 and the email client and is either terminating VPOP3 deliberately, or is blocking VPOP3 causing another part of it to crash

VPOP3 Is Responding Slowly

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

VPOP3 Is Responding Slowly If VPOP3 is responding slowly to users there are several common causes: * The VPOP3 server disk may be badly fragmented. Defragment the server disk(s). Note that sometimes the Windows defragmenter will say that the disk doesn't need defragmenting even if it does, so it is best to do it anyway. Also, there is a better free defragmenter available called

VPOP3 re-downloading old messages from the ISP POP3 server

Anonymous (anonymous@undisclosed.example.com) — 2026-01-05T09:31:47+00:00

VPOP3 re-downloading old messages from the ISP POP3 server If you tell VPOP3's POP3 mail collector to leave messages on the ISP's server for a few days, you may find that sometimes VPOP3 will redownload all the messages from the ISP mailbox again.

Error message: Your connection has been blocked temporarily - Try again later

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Error message: Your connection has been blocked temporarily - Try again later If you get an error message in your email client software saying Your connection has been blocked temporarily - Try again later or Server access temporarily blocked! Please try again later

AutoresponderConditionList Replacement

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

AutoresponderConditionList Replacement Use: ~autoresponderconditionlist~ Required parameter: responderid - the ID of the autoresponder This returns a JSON structure containing an array of the rules associated with the specified autoresponder. The return structure is an array of objects containing:

Database query to alter LAN Forwarding rules for one server to go to another

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Database query to alter LAN Forwarding rules for one server to go to another If a LAN forwarding destination server fails, you may wish to change the queued messages to go to the new server. (Note that, if planning ahead, it may be easier to use DNS

Database query to alter LAN Forwarding rules for one server to go to another

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Database query to alter LAN Forwarding rules for one server to go to another If a LAN forwarding destination server fails, you may wish to change the LAN forwarding rules to point to the new server. (Note that, if planning ahead, it may be easier to use

Message Archive -> Offline Tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Message Archive -> Offline Tab Settings -> Message Archive -> Offline Tab. The Offline tab lets you tell VPOP3 to move old archived messages to an alternative store, such as CD/DVD or external drive etc. VPOP3 will create a ZIP file containing the old messages. The archive index will still remember the messages, and the name of the ZIP file they are contained in, so you will still be able to search for messages on date, sender, subject, etc, but not on the message content.

Batch file to end a database backup

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Batch file to end a database backup VPOP3 runs pg_dump.exe to perform the regular database backups. Ending this process through Task Manager will not end the back-end database processes creating the backup data. This batch file will do it for you.

Copy SMTP Rules - Database Query

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Copy SMTP Rules - Database Query This is an advanced Database action. There is no simple query that will perform the required operation, so we have to create a custom PostgreSQL function to copy the data. At a command prompt in the VPOP3 directory run

Database files used in VPOP3 2.x

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Database files used in VPOP3 2.x VPOP3 2.x usually uses SQLite 2.8.3 as its database engine. This stores databases in discrete *.db files in the VPOP3\_database directory on the server PC. We do not recommend that you access these databases directly unless you know what you are doing, and we strongly discourage the alteration of data in the databases directly unless technical support request you to.

Delete list member from all lists

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Delete list member from all lists You can delete an email address from all VPOP3 distribution & mailing lists. Go to Settings → Database → Query Alternatively, at a command prompt in the VPOP3 directory run psql (The password is 'vpop3pass')

Database query to export LAN Forwarding rules

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Database query to export LAN Forwarding rules At a command prompt in the VPOP3 directory run psql (The password is 'vpop3pass') Then, type \copy (select conditions, address, server, username, password, outaddress as rewriteaddress, matchcount as matches from rules.lanforwarding order by ruleorder) to 'c:/temp/x.csv' csv header;

Find biggest messages

Anonymous (anonymous@undisclosed.example.com) — 2019-07-08T08:19:02+00:00

Find biggest messages To find the 10 biggest messages in your VPOP3 message store: Go to Settings → Database → Query Alternatively, at a command prompt in the VPOP3 directory run psql (The password is 'vpop3pass') Then, type SELECT username, folder, subject, fromaddr, PG_SIZE_PRETTY(size) FROM messages.messages INNER JOIN messages.folders f USING(folderid) INNER JOIN users.users u ON u.usernumber=f.userid ORDER BY size DESC LIMIT 10;

Database query to find forwards/assistants etc in user settings

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Database query to find forwards/assistants etc in user settings Go to Settings -> Database -> Query Alternatively, at a command prompt in the VPOP3 directory run psql (The password is 'vpop3pass') Then, type select username,dataname,datavalue from users.usersettings inner join users.users using(usernumber) where datavalue ilike '%searchname%';

Find a message

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Find a message If you know the subject of a message, you can search the entire message store for messages with this subject. Go to Settings → Database → Query Alternatively, at a command prompt in the VPOP3 directory run psql (The password is 'vpop3pass')

Database query to get all lists and members

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Database query to get all lists and members At a command prompt in the VPOP3 directory run psql (The password is 'vpop3pass') Then, type \copy (select l.name, address from users.listmembers m inner join users.lists l on m.list=l.id) to 'c:/temp/x.csv' csv header;

Database query to list ALL messages in the LAN forwarding queue

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Database query to list ALL messages in the LAN forwarding queue The VPOP3 settings show the first 100 messages in the LAN forwarding queue. Usually this is sufficient as the LAN forwarding queue is usually nearly empty, but in case of a problem it may be much bigger. The database queries below may help in that situation.

Database query to list failed message sends

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Database query to list failed message sends This will list failed outgoing messages from the last 3 days (with the default VPOP3 settings) At a command prompt in the VPOP3 directory run psql (The password is 'vpop3pass') Then, type select created,returnpath,subject,username || '@' || domain as recipient, latesterror from outqueue.outrecipients inner join outqueue.outmessages using(msgid) where failedtime is not null order by created desc;

Database query to list messages in the LAN forwarding queue waiting to go to a specific server

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Database query to list messages in the LAN forwarding queue waiting to go to a specific server The VPOP3 settings show the first 100 messages in the LAN forwarding queue. Usually this is sufficient as the LAN forwarding queue is usually nearly empty, but in case of a problem it may be much bigger. The database queries below let you list just messages going to a specific server.

Lua SMTP MX Server Rules

Anonymous (anonymous@undisclosed.example.com) — 2026-02-24T15:50:03+00:00

Lua SMTP MX Server Rules Every time VPOP3 checks for remote MX server for sending messages using direct MX sending, it runs a script called mxserverrules.lua which can be created/edited in Settings -> Scripts (or in the VPOP3 directory in VPOP3 v6.6 or earlier).

Lua SMTP Relay Control

Anonymous (anonymous@undisclosed.example.com) — 2025-08-14T09:24:55+00:00

Lua SMTP Relay Control Every time VPOP3 is going to send messages via SMTP Relay, it runs a script called relayout.lua in the VPOP3 directory. Global Variables This script may have global variables, depending on your version of VPOP3. In VPOP3 3.0.0L and later, there are two read-only global variables set at the start of the script:

SMTP Server Lua Scripting

Anonymous (anonymous@undisclosed.example.com) — 2025-05-08T08:23:35+00:00

SMTP Server Lua Scripting The SMTP Server Lua Script is called SMTPSVR.LUA and can be edited from the Settings -> Scripts page in the VPOP3 settings. This script is called whenever an instance of the VPOP3 SMTP server is launched - ie whenever someone opens a connection to port 25 on the VPOP3 server to send it a message, whether from a local user or an incoming SMTP message.

Database query to make LAN Forwarding immediately attempt to dequeue all pending messages

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Database query to make LAN Forwarding immediately attempt to dequeue all pending messages If VPOP3 cannot send messages using LAN Forwarding it will queue the message and retry periodically. Usually there is no need to do anything special if there was a problem with the onward mail server which has now been fixed, VPOP3 should soon retry the messages automatically (based on the value of the

Misc -> Advanced Tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Misc -> Advanced Tab Settings -> Misc Settings -> Advanced You will normally not need to change any settings on this page unless VPOP3 technical support have suggested it. If you do make changes, and want to go back to the original settings, the Restore Defaults button will restore the settings to their defaults.

Mail Sender Advanced Relay Settings

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Mail Sender Advanced Relay Settings SMTP Return Address The SMTP Return Address (or Return Path) is a hidden part of a message which says where bounce messages (and other automated responses) should be sent. (It is not the same as the Reply address

Mail Sender Advanced Settings

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Mail Sender Advanced Settings Mail Connectors -> Mail Senders -> (name) -> Advanced Advanced Domain Filtering For VPOP3 v6.11 and later, see the Domain Filtering section of the user manual. The Domain Filtering box lets you restrict which email messages are sent via this Mail Sender. You specify each rule on a separate line, and the message will be sent if it matches any sender rule

Sent message summary

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Sent message summary This will display the number of messages sent and total size over the past month. (It counts each recipient as its own message). You must have Historical Logging enabled in VPOP3 (Settings -> Logging) At a command prompt in the VPOP3 directory run

Allow messages through from a specific IP address

Anonymous (anonymous@undisclosed.example.com) — 2022-01-25T11:59:27+00:00

Allow messages through from a specific IP address This script allows messages through the spam filter if they arrive at VPOP3 from a specific SMTP sender (only when the message is sent directly to VPOP3 using SMTP, not via another server). Add the following to the spamrules_userlocal.txt file. This script file gets processed on all messages.

Autoresponder

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Autoresponder An autoresponder is a way of automatically replying to messages as they arrive in a user's mailbox. In VPOP3, an incoming message must arrive in a user's mailbox for the autoresponder to trigger. If you use forwards, assistants, mappings, etc to divert a message before it arrives in the mailbox, the autoresponder will never trigger. If you want to use an autoresponder, but not keep the original message, then make sure the message arrives in the mailbox (eg by using an 'Assistant'…

Permissions

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Permissions This section lets you configure the permissions that a particular user has. Allowed Protocols The Allowed Protocols section lets you specify which services this user has access to. Note that these settings affect access to the whole service. If you want users to be able to access a service from some IP addresses, but not from others, then use the

Database query to view password change history

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Database query to view password change history At a command prompt in the VPOP3 directory run psql (The password is 'vpop3pass') Then, type select username,updateuser,updatetime from settingaudit inner join users.users on keyfield=usernumber::varchar where tablename='users.usersettings' and keyfield2='mainpassword' order by updatetime desc;