https://wiki.pscs.co.uk/ 2026-05-13T04:11:37+00:00 https://wiki.pscs.co.uk/ https://wiki.pscs.co.uk/_media/wiki:dokuwiki.svg text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:allow_remote_access_to_vpop3_mailboxes?rev=1542192349&do=diff Allow Remote Access to VPOP3 Mailboxes Sometimes people want to be able to access their office VPOP3 mail server from a remote site or mobile phone etc. These instructions assume you have a permanent Internet connection (eg ADSL, Cable etc). If you don't have a permanent Internet connection, see text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:stop_vpop3?rev=1542192349&do=diff How to stop VPOP3 You can stop VPOP3 by going to the Services applet in Windows, find the VPOP3 Email Server service and stop it, or, if you have the VPOP3 status monitor running with appropriate permissions, you can right-click that and choose 'Shutdown Server' text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:creating_extra_smtp_services?rev=1542192349&do=diff Creating Extra SMTP Services In VPOP3 Enterprise (not VPOP3 Basic) you can create multiple SMTP services. This can be useful if you want VPOP3 to listen on different ports and/or have different settings. There are two ways of doing this. Have a single SMTP service listening on multiple ports or IP addresses text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:vpop3_access_security?rev=1542192349&do=diff How To Setup VPOP3 Service Security VPOP3 can be configured to restrict access to its various services depending on the client computer's IP address. This is useful if you want to allow access from only certain IP addresses (eg within your LAN) and prevent access from other IP addresses (eg the Internet). text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:encrypt_sessions?rev=1542192349&do=diff How To Encrypt Sessions VPOP3 Enterprise 2.6 and later supports SSL/STARTTLS encrypted sessions to VPOP3 itself. So, the email client or web browser will encrypt the data passed to VPOP3 so it cannot be intercepted. This requires an SSL Certificate to be created for VPOP3. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:installation_conflicts?rev=1542192349&do=diff Installation conficts During installation, the installer program does some basic checks for conflicting software. This is software which is providing the same services as the VPOP3 software - i.e. SMTP, POP3 and/or LDAP services. For POP3/SMTP it will show the text which the conflicting software announces itself as. text/html 2019-02-06T17:10:31+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:postgresql_replication?rev=1549473031&do=diff PostgreSQL Replication PostgreSQL 9.1 (used in VPOP3 5 and later) supports replication from a 'Master' to a 'Slave' database server. This can be used with VPOP3 for having a near-realtime backup of your settings & messages. To use the replication, you need to have a file share which is accessible from both PCs. The thing to watch out for is that the PostgreSQL services may be running as a different user from the currently logged in user, so make sure that the user(s) which the PostgreSQL servi… text/html 2018-12-05T15:25:24+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:v3_-_move_message_store_folder?rev=1544023524&do=diff v3/4 - Move the message store to a new folder/drive This guide assumes you want to just move the VPOP3 message store/database to a new folder on the same PC, and leave the VPOP3 installation directory where it is. * Stop VPOP3 * Stop PostgreSQL text/html 2019-11-12T16:10:42+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:v5_-_move_the_message_store_to_a_new_folder_drive?rev=1573575042&do=diff v5 - Move the message store to a new folder/drive Here is an alternative method, which may be simpler, but only moves the data, not the whole database store (which is a subtle difference) This guide assumes you want to just move the VPOP3 message store/database to a new folder on the same PC, and leave the VPOP3 installation directory where it is. text/html 2025-05-21T07:57:18+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:allowing_mail_relay_through_vpop3?rev=1747814238&do=diff How To Allow Mail Relay Through VPOP3 If you are allowing remote access into VPOP3 to collect mail then you may also want those remote users to be able to send their outgoing mail through VPOP3 as well. This is more complex than allowing users to collect mail, because, by default, SMTP connections are not authenticated. This means that when someone tries to send a message through VPOP3, VPOP3 doesn't know who that user is. This can cause a problem if unauthorised users try to send mail through… text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:no_transport_provider_is_available?rev=1542192349&do=diff Outlook/Windows Messaging reports "No transport provider is available" If Outlook or Windows Messaging reports No transport provider is available when trying to connect to VPOP3, it can mean several things. (This must be a contender for “the world's most meaningless error message text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:vpop3_xxxxx_server_access_not_allowed?rev=1542192349&do=diff VPOP3 Server Access Not Allowed If you get an error like: -ERR VPOP3 Server access not allowed! when trying to access VPOP3, then this means that the relevant server's IP Access Restrictions defined in VPOP3 do not allow access from your client computer. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:550_5.7.1_unable_to_relay_for?rev=1542192349&do=diff 550 5.7.1 Unable to Relay for... When trying to send emails from your email client software you get an error in your email client 550 5.7.1 Unable to relay for ... This error is happening because you have installed the Microsoft IIS SMTP Service, and your email client is talking to that service rather than to VPOP3. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:10048?rev=1542192349&do=diff Socket Error 10048 - Specified Address Already in Use This error only normally occurs during VPOP3 startup. It occurs if some other software running on the same machine as VPOP3 is using one of the ports that VPOP3 is already using. This could be a proxy like WinGate, WinProxy or anti-virus software that acts as a proxy, an LDAP server (e.g. Active Directory) or another mail server program (e.g. Exchange Server). The latter two causes are particularly common on text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:alternative_method_of_automatically_starting_vpop3?rev=1542192349&do=diff Alternative method of automatically starting VPOP3 VPOP3 usually automatically starts as a Windows service. Sometimes this does not work, either because other services need to start first, or Windows is going very slowly at startup, causing the database service to time out, or there are certain database control files which did not get cleared after a previous Windows shutdown. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:exchange_2003?rev=1542192349&do=diff Setting up VPOP3 to work with Exchange 2003 The instructions below are for Exchange Server 2003. For other versions of Exchange see here. You can link VPOP3 to Exchange Server, so that Exchange Server sends outgoing mail through VPOP3 and VPOP3 sends any incoming mail directly to Exchange Server. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:exchange_2007?rev=1542192349&do=diff Exchange 2007 You can link VPOP3 to Exchange Server, so that Exchange Server sends outgoing mail through VPOP3 and VPOP3 sends any incoming mail directly to Exchange Server. You should first of all set up VPOP3 to send and receive Internet email as normal. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:installed_new_router_and_now_nothing_works?rev=1542192349&do=diff We installed a new router and now nothing works If you installed a new router on your network and left it at the default settings, you may find that VPOP3 doesn't seem to work afterwards. This is because it may be that the new router allocates new IP addresses on your network. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:locked_accounts?rev=1542192349&do=diff Locked Accounts VPOP3 has a security feature which will lock out an account after it has had several failed login attempts. This feature is to make it harder for an attacker to use a brute force or dictionary password attack on an account. The default settings are that after more than 3 attempts to log into an account with an incorrect password, VPOP3 will lock the account for 30 minutes. You can change these settings on the text/html 2025-09-11T13:48:07+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:recovering_messages_from_corrupted_database_into_fresh_database?rev=1757598487&do=diff Recovering messages from corrupted database into fresh database If the VPOP3 message database is corrupted, then one option is to build a fresh database and restore the settings into it, then recover the messages from the old database using the 'Message Restore' function in VPOP3. This has minimal downtime, but old messages will not all be available until the restore has completed. New messages will be available quickly, and you will be able to send messages. text/html 2025-12-17T09:19:40+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:restore_a_database_backup?rev=1765963180&do=diff Restore a database backup By default VPOP3 makes a daily backup of the VPOP3 database to a file 'DBBACK-n.DMP' in the VPOP3 installation directory (it is possible to change this in the settings). These are cycled on a weekly basis so you will usually have the last seven days' worth of backups. These can be useful if the database gets damaged somehow. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:using_vpop3_with_microsoft_exchange?rev=1542192349&do=diff Using VPOP3 with Microsoft Exchange Server You can link VPOP3 to Exchange Server, so that Exchange Server sends outgoing mail through VPOP3 and VPOP3 sends any incoming mail directly to Exchange Server. You should first of all set up VPOP3 to send and receive Internet email as described in the online help. text/html 2019-11-12T16:06:44+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:v2_-_move_to_a_new_pc?rev=1573574804&do=diff How To Move VPOP3 Version 2 to a New PC (Also applies to version 1.x) To move VPOP3 to a new PC you should go through the following steps: * Copy the VPOP3 files * Copy the VPOP3 directory and subdirectories from the old PC to the new PC. (If you are moving to Windows Vista/2008/7/2012/8 or later, do NOT copy the files to a 'Program Files' folder on the new PC. Recent versions of Windows have special protection for those folders, which is not compatible with VPOP3) text/html 2018-12-05T15:25:41+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:v3_-_move_to_a_new_folder?rev=1544023541&do=diff How to move VPOP3 V3 to a new folder This guide assumes you want to move the whole of VPOP3 (including the message store) to a new folder on the same PC * Stop VPOP3 * Stop PostgreSQL * Remove the PostgreSQL service * Move VPOP3 to the new folder text/html 2021-03-19T16:01:48+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:v5_-_move_to_a_new_folder?rev=1616169708&do=diff How to move VPOP3 V5+ to a new folder This guide assumes you want to move the whole of VPOP3 (including the message store) to a new folder on the same PC * Stop VPOP3 * Stop VPOP3DB * Remove the VPOP3DB service * Move VPOP3 to the new folder text/html 2026-04-21T11:12:40+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:v5_-_move_to_a_new_pc?rev=1776769960&do=diff Move VPOP3 Version 5 (or later) to a new PC Moving VPOP3 Version 5 or later to a new PC is slightly different from moving earlier versions, because of the database system, which was introduced for version 3 and modified for version 5. The summary of steps is: * Stop VPOP3 on the original PC text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:421_4.3.2_vpop3_too_many_connections_from_your_ip_address_-_try_later?rev=1542192349&do=diff 421 4.3.2 VPOP3 Too many connections from your IP address - try later If you see this error message when you are sending messages, then it means that VPOP3 has detected too many simultaneous connections from your IP address. This would usually happen if the sender is another mail server as they can make many simultaneous connections when there are lots of messages to send. The error code that VPOP3 gives means that the sender should try sending the messages later, so it should be possible to e… text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:450_4.3.2_content_filter_timeout?rev=1542192349&do=diff 450 4.3.2 Content Filter Timeout If you get this error appearing when messages are sent to VPOP3, either in a bounce message, or in the VPOP3 status monitor, it means that the VPOP3 computer filter is taking more than the allowed amount of time (usually 60 seconds). text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:550_5.7.1_recipient_prohibited_x?rev=1542192349&do=diff 550 5.7.1 Recipient Prohibited (x) (where 'x' is a number) This means that you have an SMTP rule which is rejecting this recipient. The (x) indicates the SMTP rule number which is causing the rejection. View & edit your SMTP rules at Services -> SMTP Server text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:550_5.7.1_relaying_not_allowed_bad_sender_ip_address?rev=1542192349&do=diff 550 5.7.1 Relaying not allowed! Bad sender IP address This SMTP error message means that the computer which is sending the message is not permitted to send outgoing messages based on the VPOP3 SMTP Service's Access Restrictions. This is probably because someone is trying to send messages from outside your local network, and you have not configured VPOP3 to allow this. You have to be careful when allowing this, because you may configure VPOP3 to be an open-relay, which is a text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:552_5.2.3_message_too_large_-_contact_your_administrator?rev=1542192349&do=diff 552 5.2.3 Message too large - contact your administrator Or 552 5.2.3 Message exceeds fixed maximum message size If this error message is coming from VPOP3 when you are sending a message, it means that the message you are sending is prohibited by your VPOP3 settings. There are two places where the size limit could be set. text/html 2019-11-13T15:35:55+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:1069_-_login_failure_-_error_when_starting_vpop3db_service?rev=1573659355&do=diff 1069 or 7000 Login Failure error when starting VPOP3DB service A 1069 or 7000 login failure error when starting the VPOP3DB service usually means that something is 'wrong' with the vpop3postgres account in Windows - the password may have expired, or someone may have reset the password. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:10047?rev=1542192349&do=diff Socket Error 10047 - Addresses in the specified family cannot be used with this socket Meaning: Addresses in the specified family cannot be used with this socket This error only normally occurs during VPOP3 startup. There are two main possible reasons for this error: text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:10049?rev=1542192349&do=diff Socket Error 10049 - The specified address is not available from the local computer This error normally means that you have entered an invalid address on the IP Address to Bind To entries on the Services page in the VPOP3 settings. The addresses entered here should be either text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:archiving_not_saving_messages_on_a_shared_drive?rev=1542192349&do=diff Archiving not saving messages on a shared drive If the VPOP3 archive facility is reporting “Possible error accessing main store directory” and the archive store directory is a drive on another network computer, then there are a few possible difficulties that you have to be aware of. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:error_message_after_sending_rcptto_-_error_0_-_text_550_5.7.1_relaying_not_allowed_bad_sender_ip_address?rev=1542192349&do=diff Error message after sending RCPTTO: - error 0 - text 550 5.7.1 Relaying not allowed! Bad sender IP address If you get this error message from within Webmail, then it usually means that the SMTP service access restrictions are blocking Webmail from sending mail. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:forwarded_emails_not_arriving?rev=1542192349&do=diff Forwarded Emails Not Arriving If you are having problems having VPOP3 forward incoming messages to an external address, but sending messages directly to that address works OK, and forwarding internal messages to that address works OK, then the problem may be the SMTP return address which VPOP3 is using. text/html 2026-03-18T20:20:50+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:how_to?rev=1773865250&do=diff "How To" Articles Installation/Upgrades * Download VPOP3 * Install VPOP3 * Move VPOP3 * Upgrade VPOP3 * Upgrade VPOP3 to version 5.x or 6.x from version 4 or earlier * Upgrade VPOP3 to version 7.x from version 6 or earlier * Upgrade VPOP3 to version 8.x from version 7 or earlier * Upgrade VPOP3 to version 9 or later from version 7 or 8 * Performance Requirements * Installation Checklist General Configuration * Initial Configuration * Users * Add an Alias * Create… text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:incoming_smtp_feed?rev=1542192349&do=diff Incoming SMTP Feed An incoming SMTP feed is where incoming mail is sent directly to your mail server without going through your ISP's POP3 mail server on the way. Advantages An incoming SMTP feed has several advantages over going via a POP3 mailbox: text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:limit_size_of_sent_mail?rev=1542192349&do=diff How to limit size of sent mail There are several ways to limit the size of mail which can be sent * Limit the size of mail accepted by the SMTP component of VPOP3 * Limit the size sent for a particular user * Limit size based on 'rules' * Limit size based on text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:non-administrator?rev=1542192349&do=diff Trying to perform administrative tasks without rights This problem can have two symptoms: * When trying to access the VPOP3 settings you get an error “You are trying to perform an VPOP3 administration task while logged in as a non-administrator text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:outlook_not_able_to_connect_to_vpop3_enterprise_v6.8_when_using_ssl_tls?rev=1542192349&do=diff Outlook not able to connect to VPOP3 Enterprise v6.8 when using SSL/TLS In VPOP3 6.8 SSL v2 is disabled by default (it is considered to be insecure). SSL v3 was released in 1996 and SSL v2 was deprecated because of the well known security flaws. However, it seems that Microsoft Outlook (up to at least Outlook 2010) will not connect to VPOP3 using SSL if VPOP3's SSL v2 is disabled. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:pop3_webmail_imap4_can_t_see_messages_but_admin_can?rev=1542192349&do=diff POP3/Webmail/IMAP4 can't see a user's messages, but the administrator can Version 2.x only. This problem does not occur with version 3 or later. This problem can happen if the user's message index database has become damaged. The POP3, Webmail & IMAP4 services get the message summary data from the database, whereas the administrator console gets the message information directly from the message files on the disk, so if the database is corrupted, the administrator console can still see the mess… text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:problems_accessing_vpop3_settings?rev=1542192349&do=diff Problems accessing VPOP3 Settings If you have problems accessing the VPOP3 settings: * Go to Start -> Programs -> VPOP3 -> Configure VPOP3 on the VPOP3 computer. That should open up a web browser and take you to the login page * If VPOP3 doesn't show the login page, and shows a '403' error page instead, that means that the access restrictions for the WebMail service have been restricted so that this computer cannot access the WebMail service. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:rbl_checking_not_working_in_vpop3_enterprise?rev=1542192349&do=diff RBL Checking not working in VPOP3 Enterprise VPOP3 Enterprise has an RBL checking feature which is configured in the VPOP3 Settings at Services -> SMTP Server -> SPAM Reduction -> Realtime Blacklist Rules If it does not seem to be working properly, there are a few reasons why the RBL feature may not work. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:require_smtp_authentication?rev=1542192349&do=diff Require SMTP Authentication There are some situations where VPOP3 needs to know who is sending mail. This may be if you have VPOP3 configured to behave differently depending on who is sending messages - eg if you have different message size limits depending on the sender, or if you have message monitoring configured for certain users, or you don't want certain people to be able to send mail at all. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:sender_policy_framework?rev=1542192349&do=diff Sender Policy Framework / SPF SPF is a system used to tell mail servers which IP addresses can send mail from which domains. It is designed to reduce 'spoofing' of email addresses. For instance, if you receive an email message from your bank, your mail software can check that it came from an IP address authorised to send mail from your bank, and treat the message with suspicion if it didn't come from an authorised IP address. text/html 2020-07-22T10:32:40+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:signing_outgoing_mail_with_dkim?rev=1595413960&do=diff Signing outgoing mail with DKIM DKIM, also known as DomainKeys Identified Mail, is a form of email authentication that digitally signs emails to prove that they were sent from authorized domains and aren't fake emails. Companies like Google and Yahoo use DKIM to sign their emails and it is becoming ever more popular. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:smtp_rules?rev=1542192349&do=diff SMTP Rules Download rules are applied to messages which arrive at VPOP3 using SMTP - either locally sent messages, or incoming messages received through an SMTP mail feed. To configure the rules, go to the VPOP3 settings, then Services -> SMTP Service text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:start_vpop3?rev=1542192349&do=diff How to start VPOP3 There are two ways to start VPOP3 * as a service * as a normal application For normal operation, you will start VPOP3 as a service, as this means that VPOP3 will run even when no one is logged into the PC. To help with some types of problem diagnosis it can be better to start it as an application. This makes VPOP3 run in the account of the currently logged in user, rather than the service account, so it can eliminate access permission problems. Also, when VPOP3 starts a… text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:timeout_while_vpop3db_is_starting?rev=1542192349&do=diff Timeout while VPOP3DB is starting (Note that VPOP3 v6.11 and later, the service startup system has changed so it should not suffer from this problem) When VPOP3DB starts up, the service control manager component waits a set time for a response from the database server before it knows the service has started. If the PC is going slow (eg after a Windows update or if the PC is just slow) then this wait may not be long enough. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:too_many_logins?rev=1542192349&do=diff "Too many logins" error message VPOP3 version 4 and later have a limit on the number of concurrent logins which can be received for a single user or from a single IP address. This is to prevent a single user from bringing the server down. The current default limits are 20 per user, or 1000 per IP address (to allow multiple people sharing a NAT IP address) text/html 2020-06-29T10:43:58+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:upgrade_vpop3_to_version_7?rev=1593427438&do=diff How to upgrade VPOP3 to version 7 or later from version 6 or earlier As usual the process to upgrade is simply to install the later version over your existing installation (do not uninstall anything first). The below is technical information detailing an extra step performed by the installer in this particular upgrade step. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:upgrading_database_software?rev=1542192349&do=diff Upgrading PostgreSQL Database Software To upgrade the PostgreSQL database software used by VPOP3 * stop VPOP3 * backup the database (<http://wiki.pscs.co.uk/how_to;backup_vpop3#manual_database_backup1>) * uninstall PostgreSQL (from within Windows) if necessary * rename the VPOP3\pgsql folder to something else text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:v2_-_move_to_a_new_folder?rev=1542192349&do=diff How To Move VPOP3 Version 2 to a New Folder/Drive on the same PC (Also applies to version 1.x) To move VPOP3 to a new folder or drive on the same PC you should go through the following steps: * Copy the VPOP3 directory and subdirectories from the old folder to the new folder. text/html 2019-11-12T16:09:08+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:v3_-_move_to_a_new_pc?rev=1573574948&do=diff Move VPOP3 Version 3 or 4 to a new PC Moving VPOP3 Version 3 or 4 to a new PC is slightly different from moving earlier versions, because of the database system. The summary of steps is: * Stop VPOP3 on the original PC * Manually make a backup of the database on the original PC text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:vpop3_sending_high_volumes_of_unrecognised_mails?rev=1542192349&do=diff SMTP Relay Protection in VPOP3 SMTP Relay Protection should be used on ALL SMTP mail servers (such as VPOP3) which have a permanent connection to the Internet. You may also want to use it on servers which are only connected occasionally via a dial-up connection. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:vpop3db_service_doesn_t_exist?rev=1542192349&do=diff VPOP3DB Service doesn't exist If VPOP3 v3 or later won't start, and you find that the VPOP3DB (or PostgreSQL-VPOP3) service does not exist in the Windows Services list, it may be that you have just moved VPOP3 and made a mistake following the move procedure or something has removed the service for some reason. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:your_connection_has_been_blocked_temporarily_-_try_again_later?rev=1542192349&do=diff Error message: Your connection has been blocked temporarily - Try again later If you get an error message in your email client software saying Your connection has been blocked temporarily - Try again later or Server access temporarily blocked! Please try again later