PSCS Wiki

Mail Sender Advanced Settings

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Mail Sender Advanced Settings Mail Connectors -> Mail Senders -> (name) -> Advanced Advanced Domain Filtering For VPOP3 v6.11 and later, see the Domain Filtering section of the user manual. The Domain Filtering box lets you restrict which email messages are sent via this Mail Sender. You specify each rule on a separate line, and the message will be sent if it matches any sender rule

Lua SMTP MX Control

Anonymous (anonymous@undisclosed.example.com) — 2026-02-24T15:49:48+00:00

Lua SMTP MX Control Every time VPOP3 is going to send messages using direct MX sending, it runs a script called mxout.lua which can be created/edited in Settings -> Scripts (or in the VPOP3 directory in VPOP3 v6.6 or earlier). Global Variables Starting with v8.8, the following global variables are defined:

Lua SMTP Relay Control

Anonymous (anonymous@undisclosed.example.com) — 2025-08-14T09:24:55+00:00

Lua SMTP Relay Control Every time VPOP3 is going to send messages via SMTP Relay, it runs a script called relayout.lua in the VPOP3 directory. Global Variables This script may have global variables, depending on your version of VPOP3. In VPOP3 3.0.0L and later, there are two read-only global variables set at the start of the script:

SMTP Server Lua Scripting

Anonymous (anonymous@undisclosed.example.com) — 2025-05-08T08:23:35+00:00

SMTP Server Lua Scripting The SMTP Server Lua Script is called SMTPSVR.LUA and can be edited from the Settings -> Scripts page in the VPOP3 settings. This script is called whenever an instance of the VPOP3 SMTP server is launched - ie whenever someone opens a connection to port 25 on the VPOP3 server to send it a message, whether from a local user or an incoming SMTP message.

Signature Script

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Signature Script If you want more complex signatures on outgoing emails, rather than the static text/HTML you can define within VPOP3, then you can use a simple Lua script to define the signature. The Lua script is stored in a file called signature.lua

Error Handling Scripting

Anonymous (anonymous@undisclosed.example.com) — 2023-11-20T10:18:01+00:00

Error Handling Scripting For most error messages that VPOP3 generates, it allows control of error messages, eg to limit the frequency of error messages if they would be generated repeatedly. These limits are set in Settings -> Admin Settings -> Message Control. However, if you want more granular control, you can use Lua scripting for more fine-grained control

SMTP Reputation Stats

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTP Reputation Stats (Added in v6.20) If you receive email by direct incoming SMTP (not via an ISP or filtering service) then you can tell VPOP3 to report sender reputation statistics back to VPOP3. This is enabled/disabled in the Settings -> Misc Settings page.

ListServer Commands

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

ListServer Commands The ListServer is an automated process in VPOP3 which manages mailing lists. People can send commands to the ListServer to perform various functions remotely. Whether these commands are allowed, and exactly how they work depends on the particular mailing list's settings.

Monitor Scripting

Anonymous (anonymous@undisclosed.example.com) — 2019-08-27T16:13:40+00:00

Monitor Scripting (Added in V6.15) This script has three functions: * MonitorIncoming * MonitorInternal * MonitorOut The functions are similar, except they are called when different messages are to be monitored (incoming, internal and outgoing messages respectively).

POP3 Mail Collection

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

POP3 Mail Collection POP3 Mail Collection is when VPOP3 will collect mail from an external POP3 mailbox - for instance, from an Internet Provider. POP3 General This page tells VPOP3 how to collect mail. * POP3 Server Address - this is the name (or IP address) of the POP3 server from which you want VPOP3 to collect mail

Spamfilter Quarantine Viewer

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spamfilter Quarantine Viewer Settings -> Spamfilter -> Quarantine Viewer The Quarantine Viewer lets you see messages which have been quarantined by the VPOP3 Spam Filter. As an administrator you can see quarantined messages for any user, and release them if appropriate. If you release a message, it will be sent into the original recipient's Inbox, not into your Inbox.

Autoresponder

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Autoresponder An autoresponder is a way of automatically replying to messages as they arrive in a user's mailbox. In VPOP3, an incoming message must arrive in a user's mailbox for the autoresponder to trigger. If you use forwards, assistants, mappings, etc to divert a message before it arrives in the mailbox, the autoresponder will never trigger. If you want to use an autoresponder, but not keep the original message, then make sure the message arrives in the mailbox (eg by using an 'Assistant'…

Autoresponder Global Scripting

Anonymous (anonymous@undisclosed.example.com) — 2026-03-23T15:29:29+00:00

Autoresponder Global Scripting For scripting to modify the autoresponder text which is embedded in the autoresponder itself, see Autoresponder Scripting The Autoresponder Global Script is executed for every autoresponse. It is stored in the 'Autoresponder.lua' script in Settings → Scripts

SMTP Service - Filtering

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTP Service - Filtering The SMTP Server -> Filtering tab lets you set up filtering of messages going through the VPOP3 SMTP service. This may be incoming SMTP messages, or locally sent messages. SMTP Rules SMTP Rules let you create custom rules for processing messages as they go through the VPOP3 SMTP service.

Spam Filter Rules: DBInsert

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spam Filter Rules: DBInsert Statement DBInsert Version 6.16+ Purpose Inserts a record into the spam filter database The DBInsert statement requires a type, component name, key and value, in the format DBInsert

User Routing Script

Anonymous (anonymous@undisclosed.example.com) — 2023-03-27T10:32:18+00:00

User Routing Script If there is a /user_redirect.lua script, this Lua script can override VPOP3's message routing options. You can edit this either in the Settings -> Scripts page in the settings, or via the 'Routing' tab in the user's settings in the VPOP3 administration console. This script affects how VPOP3 will handle how messages

Attachment Extraction Scripting

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Attachment Extraction Scripting This is the 'extraction.lua' script. (Added in V6.17) This script has one functions: * Extract This functions is called if the attachment extraction is enabled in Settings -> Attachment Processing -> Extraction.

Misc -> Advanced Tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Misc -> Advanced Tab Settings -> Misc Settings -> Advanced You will normally not need to change any settings on this page unless VPOP3 technical support have suggested it. If you do make changes, and want to go back to the original settings, the Restore Defaults button will restore the settings to their defaults.

User Delivery Script

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

User Delivery Script (VPOP3 v6.5 or later) If there is a /delivery.lua script, this Lua script can override VPOP3's message delivery options. You can edit this in the Settings -> Scripts page in the settings. This script affects how VPOP3 will handle how messages being delivered to this user are handled.

Settings -> Attachment Processing

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Settings -> Attachment Processing The Attachment Processing page allows you to configure VPOP3 to perform two distinct functions on messages that contain attachments: * * Filtering The Filtering tab is divided into four main sections: Attachment Filtering

Autoresponder Commands

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Autoresponder Commands This article only applies to VPOP3 v4 and earlier A VPOP3 autoresponder can contain special text strings to create special behaviour, in addition to plain text as part of the response. There are three types of 'command' *

Autoresponder scripting

Anonymous (anonymous@undisclosed.example.com) — 2025-05-28T09:24:38+00:00

Autoresponder scripting For scripting to alter the whole autoresponder definition and set in the VPOP3 settings rather than embedded in an autoresponder itself, see Autoresponder Global Scripting In an autoresponder, you can create a Lua script by surrounding it with & tags, eg

DMARC Reporter Script

Anonymous (anonymous@undisclosed.example.com) — 2023-11-12T09:51:40+00:00

DMARC Reporter Script (from VPOP3 v8.6 onwards) This script lets you customise how VPOP3 sends DMARC reports to the sending domain. This can be useful in case the sending domain's DMARC configuration is incorrect as that can cause errors sending the reports or cause messages to be 'stuck' in VPOP3's Outqueue. These problems won't cause any lasting damage, but may be inconvenient or annoying, so you can alter the behaviour using Lua scripting

Mail Connectors -> Mail Senders -> SMTP Relay

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Mail Connectors -> Mail Senders -> SMTP Relay VPOP3 can be configured to send through an SMTP Relay server (sometimes known as a smarthost). This is the usual configuration for small/medium sized businesses and home users. If you have a dial-up, ADSL, Cable, FTTC etc connection, then your Internet Provider will normally give you access to their SMTP relay service.

Spamrules example - increase spam score for long sender domain

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spamrules example - increase spam score for long sender domain This script is for the case where you to increase the spamminess of emails where the sender's email address contains a long domain. In this case we'll say if the sender's domain has 20 or more characters in the first section (between the @ and first .). Note that we do not necessarily recommend that you do this as it is not a very good indicator of spam, but it is something we've been asked for, so here it is.

SMTP Service -> Advanced Tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTP Service -> Advanced Tab Services -> SMTP Server -> Advanced Tab Refuse SMTP Connections from This setting should be rarely needed, and should be normally left blank. It is here for historic purposes. If you put some text in this box, then VPOP3 will refuse any SMTP connections from clients whose 'HELO'/'EHLO' command data contains the text specified here as a substring. Eg, if this setting is set to '.myisp.com', then VPOP3 would refuse SMTP connections from any client which sends the c…

Mail Connectors -> Mail Senders -> SMTP Direct

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Mail Connectors -> Mail Senders -> SMTP Direct VPOP3 can be configured to send mail directly to the recipient's mail server (or the recipient's mail service provider). Usually this is only used if you have a high-end business class Internet connection - such as a leased line, or your mail server is co-located in a data centre. Attempts to use SMTP Direct sending on a dial-up/ADSL/Cable/FTTC/etc connection may be problematic since the receiving mail server may think you a home user who has been …

Users.Autoresponders table

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Users.Autoresponders table The Users.Autoresponders table contains the users' autoresponder definitions Columns * autoresponderid - this is a numeric id of the autoresponder entry (primary key) * owneruser - this is the numeric id of the user which the autoresponder belongs to (or 0 for a 'template' autoresponder)

Spamfilter White/Blacklists

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spamfilter White/Blacklists This lets you set whitelists & blacklists for the spam filter. There are four lists you can manage. The Whitelist Addresses & Blacklist Addresses lists let you specify sender email addresses to check. With the default rule weights, if a sender's address is on the Whitelist, it will be allowed through the spam filter, and if it is on the Blacklist it will be blocked. If an address is on both the Whitelist and the Blacklist, they will cancel each other out, and the me…

Archive Script

Anonymous (anonymous@undisclosed.example.com) — 2023-03-25T23:33:31+00:00

Archive Script (from VPOP3 v6 onwards) Archive scripting lets you indicate whether full message content should be stored in the message archive. This could be used, for instance, for filtering out messages containing credit card details. The message headers will still be archived, along with the explanation text returned by the script.

Autoresponders - v3 and v4

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Autoresponders - v3 and v4 This section lets you define an autoresponder for a user. An autoresponder is a message which is sent back in response to a message which arrives in this user's mailbox. The Autoresponder Type can be set to None, Simple Autoresponder

Connections

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Connections In VPOP3 a Connection tells VPOP3 how to 'connect' to the Internet. VPOP3 supports up to 10 Connections, which can be either network connections or Dial-Up connections (using a modem) A Connection is linked to one Mail Sender and zero or more Mail Collectors.

Lua SMTP MX Server Rules

Anonymous (anonymous@undisclosed.example.com) — 2026-02-24T15:50:03+00:00

Lua SMTP MX Server Rules Every time VPOP3 checks for remote MX server for sending messages using direct MX sending, it runs a script called mxserverrules.lua which can be created/edited in Settings -> Scripts (or in the VPOP3 directory in VPOP3 v6.6 or earlier).

Mappings

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Mappings In VPOP3, Mappings are a way of explicitly linking an email address to a user or list. They can also be used to indicate that an email address is remote, even though it would otherwise appear to be a local email address. In other email servers, a similar feature may be called 'aliases'

Message Monitoring

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Message Monitoring Message monitoring in VPOP3 will tell VPOP3 to send a copy of all the outgoing, internal and/or incoming mail from/to specified users to be sent to another specified user. In the current versions of VPOP3, all monitored messages are sent to the same user (or list), you cannot specify different recipients for different monitored users. (This may be something that is added/enhanced in the future)

msgaudit Database table

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

msgaudit Database table This can (optionally) contain data showing how messages have been handled (eg deleted, moved, etc) * id - incrementing ID of msgaudit entry * datetime - the date & time the event occurred * component - which VPOP3 component performed the event

Outgoing Message Scripting

Anonymous (anonymous@undisclosed.example.com) — 2024-03-21T10:49:54+00:00

Outgoing Message Scripting Every time VPOP3 adds a message to the Outgoing mail queue, it runs a script called outmessage.lua. Scripts are stored as files in the VPOP3 directory in VPOP3 v6.6 and earlier, or managed through the Settings -> Scripts page in VPOP3 v6.7 and later.

Mail Connectors -> Connector Schedule

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Mail Connectors -> Connector Schedule The Connector Schedule tells VPOP3 when to connect to send mail using Mail Senders and collect mail using Mail Collectors. It does not affect incoming SMTP over a permanent connection, or LAN Forwarding. The connection schedule also tells VPOP3 when to check for updates to the

Mail Sender Advanced Relay Settings

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Mail Sender Advanced Relay Settings SMTP Return Address The SMTP Return Address (or Return Path) is a hidden part of a message which says where bounce messages (and other automated responses) should be sent. (It is not the same as the Reply address

SMTP Direct Sender Settings

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTP Direct Sender Settings Mail Connectors -> Mail Senders -> SMTP Direct Sender -> Settings tab The SMTP Direct Settings tab lets you set how VPOP3 will send mail using SMTP Direct DNS Servers to Use This setting tells VPOP3 the IP addresses of the DNS servers it should use to find the recipients' mail servers. Separate multiple addresses with commas.

SMTP -> Load Limiting tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTP -> Load Limiting tab This page is reached from Services -> SMTP Server, then the Load Limiting tab. Here you can set limits on how many active SMTP sessions there are, and other related settings. This lets you limit the load on the VPOP3 server. This is especially important if VPOP3 is performing spam filtering on incoming SMTP messages, because the spam filter can add considerable load. You can reduce the spamfilter load by using the

Allow messages through from a specific IP address

Anonymous (anonymous@undisclosed.example.com) — 2022-01-25T11:59:27+00:00

Allow messages through from a specific IP address This script allows messages through the spam filter if they arrive at VPOP3 from a specific SMTP sender (only when the message is sent directly to VPOP3 using SMTP, not via another server). Add the following to the spamrules_userlocal.txt file. This script file gets processed on all messages.

Spam Filter Rules: Variables

Anonymous (anonymous@undisclosed.example.com) — 2023-08-14T16:01:01+00:00

Spam Filter Rules: Variables The VPOP3 spam filter script language supports simple variables. In most places these are specified as ${}, but in some places they are just specified as - for instance where a statement always puts its result into a variable.

Message Rules

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Message Rules The Edit User -> Message Rules tab can be used to create/edit rules which are processed when messages arrive in a User's mailbox. They can be used to copy messages, mark them as read, delete them, etc VPOP3 will process Message Rules in the order they appear in the list. If you want to change the order of the rules, you can drag & drop them into the correct order. Usually when VPOP3 has processed a rule, it will go on to check further rules, but you can use the

Permissions

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Permissions This section lets you configure the permissions that a particular user has. Allowed Protocols The Allowed Protocols section lets you specify which services this user has access to. Note that these settings affect access to the whole service. If you want users to be able to access a service from some IP addresses, but not from others, then use the

Users.AutoresponderConditions table

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Users.AutoresponderConditions table The Users.AutoresponderConditions table contains a record of all autoresponder trigger conditions created in VPOP3. These tell VPOP3 when a particular autoresponder should fire for a particular user. Each autoresponder can have zero or more conditions. An autoresponder with zero conditions will never fire but can be reactivated later by adding a new condition.

VPOP3.GetMessages Lua function

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

VPOP3.GetMessages Lua function The Lua management function 'VPOP3.GetMessages' retrieves a table containing all the mail messages in a specified folder. VPOP3.GetFolders(username, folder); * username is the username from VPOP3.GetUsers * folder is the folder from VPOP3.GetFolders It returns a table where the key is the message UID and the value is a table of:

Message Archive -> Offline Tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Message Archive -> Offline Tab Settings -> Message Archive -> Offline Tab. The Offline tab lets you tell VPOP3 to move old archived messages to an alternative store, such as CD/DVD or external drive etc. VPOP3 will create a ZIP file containing the old messages. The archive index will still remember the messages, and the name of the ZIP file they are contained in, so you will still be able to search for messages on date, sender, subject, etc, but not on the message content.

LAN Forwarding Queue Status

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

LAN Forwarding Queue Status To view the LAN Forwarding Queue Status, go to Settings -> Local Mail -> LAN Forwarding -> Queue Status The LAN Forwarding Queue shows the messages which VPOP3 has currently got queued to be sent to another mail server on your network using SMTP. The LAN Forwarding Queue status page shows a simple list of the messages waiting to be sent. The four columns in the table show:

Database query to list ALL messages in the LAN forwarding queue

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Database query to list ALL messages in the LAN forwarding queue The VPOP3 settings show the first 100 messages in the LAN forwarding queue. Usually this is sufficient as the LAN forwarding queue is usually nearly empty, but in case of a problem it may be much bigger. The database queries below may help in that situation.

Database query to list messages in the LAN forwarding queue waiting to go to a specific server

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Database query to list messages in the LAN forwarding queue waiting to go to a specific server The VPOP3 settings show the first 100 messages in the LAN forwarding queue. Usually this is sufficient as the LAN forwarding queue is usually nearly empty, but in case of a problem it may be much bigger. The database queries below let you list just messages going to a specific server.

LogDB.Messages table

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

LogDB.Messages table The LogDB.Messages table contains a record of all messages logged by VPOP3. A message is logged when a message is sent/received/etc. Columns * msgid - this is a bigint sequential value which identifies the message uniquely in the database

Mail Connectors -> Mail Senders

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Mail Connectors -> Mail Senders The Mail Sender tells VPOP3 how to send mail out to the Internet. If you want to send mail for specific users to another specific mail server (e.g. a local Microsoft Exchange Server or another VPOP3 server) then use the

Mail tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Mail tab The Mail tab within VPOP3 webmail enables you to manage your sent and received messages. As you can see from the screenshot, the page is divided into three main sections: Menu bar General tab bar Status bar [Mail tab - VPOP3 Version 5 Webmail] Page structure Mail toolbar The Mail toolbar contains the following buttons:

SMTP Server -> Spam Reduction

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTP Server -> Spam Reduction The Spam Reduction tab lets you configure various ways VPOP3 can reduce spam and email address spoofing Domainkeys “Domainkeys” is a way of signing a message to show that it comes from the person it claims to come from. The system is too complex to go into here, but it essentially takes key parts of the message header, as well as the message body and creates a PKI digital signature on it, using a 'private key' on your system. The receiving end will find the same…

Spam Filter Rules

Anonymous (anonymous@undisclosed.example.com) — 2023-01-18T15:57:13+00:00

Spam Filter Rules VPOP3 Versions 2.1.7 and later have a built-in spam filter system which supports a simple script language optimised for content- and spam-filtering of email messages. This reference contains a definition of the spam filtering script language supported by VPOP3. Note that as later versions of VPOP3 are released, more language features may be added, so this reference indicates in which version of VPOP3 a particular feature was added.

Spamfilter.Whitelist table

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spamfilter.Whitelist table The Spamfilter.Whitelist table contains the spamfilter whitelist entries which do not contain wildcards or regular expressions. They are separated out to speed up checking. Columns * address - this is the email address in the whitelist

Spam Filter Rules: ForEach

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spam Filter Rules: ForEach Statement ForEach Version 2.1.7+ Purpose Causes a loop to be run through for all values within specified criteria The ForEach statement requires either two or three parameters (depending on the type of loop that is being conducted), in the format

Spam Filter Rules: IfMatch

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spam Filter Rules: IfMatch Statement IfMatch Version 2.1.7+ Purpose Allows you to perform a regular or substring match on a variable or part of the message being processed IfMatch statements require a data parameter and a search value, in the format

Spam Filter Rules: Log

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spam Filter Rules: Log Statement Log Version 2.1.11+ Purpose Allows you to write entries to the spamrules log file The Log statement lets you write a custom entry to the SPAMRULES.LOG file. This can be useful for debugging scripts. Example Log "Sender = ${MailFrom}"

Summary Log File Format

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Summary Log File Format VPOP3 creates a file called SUMMARY.LOG in the VPOP3 directory which contains summary information which is compiled daily into a daily summary reports sent to the administrator. VPOP3 can keep these summary logs in a subdirectory called

Temporary Files

Anonymous (anonymous@undisclosed.example.com) — 2026-02-19T17:56:27+00:00

Temporary Files This is for files in the VPOP3\_temp folder Most of the filename is the hexadecimal timestamp (in Windows 'FILETIME'/65536 form) with a 4 digit hex sequential number afterwards. The first letter or two (usually G-Z) can tell something about what caused the file.

VPOP3.SendMessage

Anonymous (anonymous@undisclosed.example.com) — 2021-08-09T10:58:46+00:00

VPOP3.SendMessage The Lua function 'VPOP3.SendMessage' sends a text email message It takes four parameters: * The email address of the sender * The email address of the recipient * The subject line * The message body The function returns one value:

Webmail Menu bar

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Webmail Menu bar The Webmail Menu bar within VPOP3 webmail enables you to quickly perform relevant actions. The Menu has six main headings; of which, three have multiple options. Option Active Function V Notes Message Mail and View Message tabs Opens/closes Message menu