https://wiki.pscs.co.uk/ 2026-05-13T04:30:51+00:00 https://wiki.pscs.co.uk/ https://wiki.pscs.co.uk/_media/wiki:dokuwiki.svg text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:vpop3_not_starting_properly?rev=1542192349&do=diff VPOP3 Not Starting Properly If VPOP3 is not starting properly, then the first thing to check is whether the database server is starting. In VPOP3 v3 and later, VPOP3 uses a PostgreSQL Database server for data storage, so if the database server is not running, VPOP3 will not be able to start properly. In this case, the VPOP3.EXE process may appear in Task Manager, but it won't respond to anything, or it may appear in Task Manager and then stop after a short period. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:status_monitor_is_open?rev=1542192349&do=diff Status Monitor is open during installation During installation, if the installer says that the VPOP3 Status Monitor is open, and won't let you install VPOP3, that means that Windows is refusing to let the installer overwrite the VPOP3STATUS.EXE program. Usually that means that it is currently running. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:10061?rev=1542192349&do=diff Socket Error 10061 - The attempt to connect was forcefully rejected Error 10061 means that the computer which VPOP3 was trying to connect to (probably at your ISP) refused the connection from the computer running VPOP3. There are several possibilities that can cause error 10061: text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:archiving_not_saving_messages_on_a_shared_drive?rev=1542192349&do=diff Archiving not saving messages on a shared drive If the VPOP3 archive facility is reporting “Possible error accessing main store directory” and the archive store directory is a drive on another network computer, then there are a few possible difficulties that you have to be aware of. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:error_sending_message_after_authentication?rev=1542192349&do=diff "Error Sending Message After Authentication" in Webmail If you get an error while sending a message using Webmail, such as “Error sending message after authentication - error 0 - text 502 Error: command not implemented” this means that you have another SMTP server running on the VPOP3 computer, and when the VPOP3 Webmail service tries to send the message it is sending it to this other SMTP server, rather than to the VPOP3 server. The Webmail service uses internal commands which the other SMTP… text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:many_instances_of_postgres.exe_running?rev=1542192349&do=diff Many instances of Postgres.exe are running If you are running VPOP3 3.0 or later, and look in the 'Processes' list in Windows TaskManager you will probably see multiple instances of postgres.exe running. This is perfectly normal, and does not indicate a problem. The PostgreSQL database works by having a separate instance of postgres.exe for each connection to the database (as well as a few extra for management and house keeping). This behaviour is documented on the text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:vpop3_status_monitor_problems?rev=1542192349&do=diff VPOP3 Status Monitor Problems The VPOP3 Status Monitor is the program which shows the little (usually red) postbox icon in the Windows task tray. This usually launches automatically from the Windows startup group. This program is VPOP3Status.EXE on the disk, or can be run manually from text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:remoteaccessdialup?rev=1542192349&do=diff Remote Access to VPOP3 without a permanent Internet connection If you do not have a permanent connection to the Internet, then the user will need to dial directly into the VPOP3 computer or another computer on the network. This only works reliably if the dial-inserver is running Windows NT, Windows 2000 or later versions. text/html 2025-12-17T09:19:40+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:restore_a_database_backup?rev=1765963180&do=diff Restore a database backup By default VPOP3 makes a daily backup of the VPOP3 database to a file 'DBBACK-n.DMP' in the VPOP3 installation directory (it is possible to change this in the settings). These are cycled on a weekly basis so you will usually have the last seven days' worth of backups. These can be useful if the database gets damaged somehow. text/html 2020-06-29T10:43:58+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:upgrade_vpop3_to_version_7?rev=1593427438&do=diff How to upgrade VPOP3 to version 7 or later from version 6 or earlier As usual the process to upgrade is simply to install the later version over your existing installation (do not uninstall anything first). The below is technical information detailing an extra step performed by the installer in this particular upgrade step. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:backup_vpop3?rev=1542192349&do=diff How to Backup VPOP3 By default VPOP3 v3 and later will automatically perform a daily backup of the database into a file called DBBACK-x.DMP, where the backup file rotates on a weekly basis (DBBACK-0.DMP is Sunday's backup, DBBACK-1.DMP is Monday's backup, etc). text/html 2025-09-11T13:02:45+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:database_issues?rev=1757595765&do=diff Database Issues VPOP3 version 3 and later use the PostgreSQL] database server. This is an open source enterprise level database server. Several VPOP3 problems are due to problems with the database service. * Database & Disk Caching * Software conflicting with database * VPOP3DB Service not starting * Database Size Database corruption If VPOP3 won't start even though the process is running, then that is often because the PostgreSQL service is not running. If the PostgreSQL service won… text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:database_maintenance?rev=1542192349&do=diff Database Maintenance VPOP3 uses the PostgreSQL database server for most of its data storage. Normally this will not require any special maintenance, because it will manage itself. To do any special database maintenance you will need to close down VPOP3 first, because PostgreSQL needs exclusive access to the database to perform any operations such as decreasing the size of database files. Note that these operations may take some time! There are some PostgreSQL utility programs in the VPOP3\pgs… text/html 2021-03-08T10:48:40+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:install_vpop3?rev=1615200520&do=diff How to Install VPOP3 Simply download VPOP3 from the website, and run the installation program and follow the prompts. Occasionally people may have problems with the PostgreSQL part of the installation. If that happens, please contact us either by email at support@pscs.co.uk or by phone to +44 (0)1484 855800, and we will do our best to help. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:installation_errors?rev=1542192349&do=diff Installation Errors This page lists some errors which may occur during installation and the solution. In general, do NOT 'ignore' any errors unless we tell you to. If you have to retry an installation, when it is an upgrade from versions 1 - 4 going to version 5 or later, then make sure you have told the installer to install the database. Sometimes a partial installation will make the installer think that the database is already installed. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:mozilla_thunderbird?rev=1542192349&do=diff How to configure Mozilla Thunderbird This article won't show you all the possible settings in Thunderbird, because there are so many. Thunderbird is one of the most powerful & flexible email clients available at the time of writing, especially if you use IMAP4 (with VPOP3 Enterprise). text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:pop3_client_problem?rev=1542192349&do=diff VPOP3 - POP3 Client Problem These errors occur whilst VPOP3 is communicating with your ISP's POP3 mail server to retrieve your mail. The server connection was closed unexpectedly If the message text is Error with Pop3 Client (XXXX (YY)) The server connection was closed unexpectedly text/html 2019-02-06T17:10:31+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:postgresql_replication?rev=1549473031&do=diff PostgreSQL Replication PostgreSQL 9.1 (used in VPOP3 5 and later) supports replication from a 'Master' to a 'Slave' database server. This can be used with VPOP3 for having a near-realtime backup of your settings & messages. To use the replication, you need to have a file share which is accessible from both PCs. The thing to watch out for is that the PostgreSQL services may be running as a different user from the currently logged in user, so make sure that the user(s) which the PostgreSQL servi… text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:seeing_where_a_message_came_from?rev=1542192349&do=diff Seeing where a message came from Sometimes you need to check to see where a message really came from. The 'From:' email address is easily forged, so that cannot be relied upon. The first thing you have to do is to get the full message headers. These may look daunting, but are very useful for problem diagnosis. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:some_client_pcs_cannot_access_vpop3?rev=1542192349&do=diff Some PCs cannot access VPOP3 when VPOP3 is connected to the Internet This error happens when you have multiple TCP/IP subnets on your network. The computers which are on different subnets from the VPOP3 computer will not be able to see VPOP3 whilst VPOP3 is connected to the Internet (through a dial-up connection). Whenever VPOP3 is offline, it will work correctly. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:use_the_vpop3_status_monitor?rev=1542192349&do=diff How to use the VPOP3 Status Monitor The VPOP3 Status Monitor is a small program which displays a postbox icon (usually red) in the Windows notification area (usually at the bottom right of the screen - by the clock). This icon can be used for quick access to various VPOP3 facilities. Note that the Status Monitor is text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:550_5.7.1_unable_to_relay_for?rev=1542192349&do=diff 550 5.7.1 Unable to Relay for... When trying to send emails from your email client software you get an error in your email client 550 5.7.1 Unable to relay for ... This error is happening because you have installed the Microsoft IIS SMTP Service, and your email client is talking to that service rather than to VPOP3. text/html 2019-11-13T15:35:55+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:1069_-_login_failure_-_error_when_starting_vpop3db_service?rev=1573659355&do=diff 1069 or 7000 Login Failure error when starting VPOP3DB service A 1069 or 7000 login failure error when starting the VPOP3DB service usually means that something is 'wrong' with the vpop3postgres account in Windows - the password may have expired, or someone may have reset the password. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:10047?rev=1542192349&do=diff Socket Error 10047 - Addresses in the specified family cannot be used with this socket Meaning: Addresses in the specified family cannot be used with this socket This error only normally occurs during VPOP3 startup. There are two main possible reasons for this error: text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:10048?rev=1542192349&do=diff Socket Error 10048 - Specified Address Already in Use This error only normally occurs during VPOP3 startup. It occurs if some other software running on the same machine as VPOP3 is using one of the ports that VPOP3 is already using. This could be a proxy like WinGate, WinProxy or anti-virus software that acts as a proxy, an LDAP server (e.g. Active Directory) or another mail server program (e.g. Exchange Server). The latter two causes are particularly common on text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:10049?rev=1542192349&do=diff Socket Error 10049 - The specified address is not available from the local computer This error normally means that you have entered an invalid address on the IP Address to Bind To entries on the Services page in the VPOP3 settings. The addresses entered here should be either text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:10053?rev=1542192349&do=diff Socket Error 10053 - An established connection was aborted by the software in your host machine. Error 10053 means that an established connection has been dropped. There are three descriptions of this error message we know about, but the descriptions are given by Windows, so they may vary depending on your version of Windows: text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:10055?rev=1542192349&do=diff Socket Error 10055 - No Buffer Space Available Error 10055 means that Windows has run out of TCP/IP socket buffers because too many connections are open at once. Things to check if this happens are: * Is there any other TCP/IP software running on the same PC as VPOP3 - eg a proxy server text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:compatibility_with_spampal?rev=1542192349&do=diff Compatibility with SpamPal Some users have reported a problem installing/running the PostgreSQL component when the 'SpamPal SMTP Transparent Feature' is enabled. Disabling this feature has resolved the problem for these users. Unfortunately we don't have further information on this, as we don't use SpamPal ourselves, but the above information may be useful if you have this problem. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:data_stream_contained_nul_character?rev=1542192349&do=diff Data stream contained NUL character Description of the problem NUL characters (bytes with value 0) are not allowed in email messages and should not be transmitted over POP3, SMTP or IMAP4 except in certain circumstances. If an attachment contains such a byte it must be encoded using text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:database_backup_failed?rev=1542192349&do=diff Database Backup Failed VPOP3 version 3 and later will, by default, make a backup of the database used by VPOP3 into a file. This uses the PostgreSQL utility 'pg_dump' If an error occurs whilst running this program, VPOP3 will create a 'Database Backup Failed' error message to the administrator. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:error_creating_service_entry_vpop_-_5?rev=1542192349&do=diff Error creating Service Entry (VPOP3) - 5 If you get this error while running VPOP3SVC QuickConfig to install the VPOP3 service this might mean that some security software is blocking it from creating the service. This has been observed with Sophos Antivirus. In that case, go to the Quarantine Manager in Sophos, and text/html 2025-10-06T15:21:37+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:error_messages?rev=1759764097&do=diff Error Messages This is the place to look if you are trying to trouble shoot a problem and you have received or have access to a specific error message or error code. If instead your problem is that something you think is set up correctly is not working then the best place to look would be the text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:exchange_2003?rev=1542192349&do=diff Setting up VPOP3 to work with Exchange 2003 The instructions below are for Exchange Server 2003. For other versions of Exchange see here. You can link VPOP3 to Exchange Server, so that Exchange Server sends outgoing mail through VPOP3 and VPOP3 sends any incoming mail directly to Exchange Server. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:exchange_2007?rev=1542192349&do=diff Exchange 2007 You can link VPOP3 to Exchange Server, so that Exchange Server sends outgoing mail through VPOP3 and VPOP3 sends any incoming mail directly to Exchange Server. You should first of all set up VPOP3 to send and receive Internet email as normal. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:general_configuration_tasks?rev=1542192349&do=diff Initial Configuration Tasks After installing VPOP3, you will need to get into the VPOP3 settings. The easiest way of doing this is to find the VPOP3 Status Monitor in the Windows task tray. Right-click this icon, and choose 'VPOP3 Settings'. (If that doesn't work, see this article to troubleshoot Status Monitor problems). Alternatively, on the VPOP3 PC, you can go to Start text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:incoming_smtp_feed?rev=1542192349&do=diff Incoming SMTP Feed An incoming SMTP feed is where incoming mail is sent directly to your mail server without going through your ISP's POP3 mail server on the way. Advantages An incoming SMTP feed has several advantages over going via a POP3 mailbox: text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:install_the_status_monitor_on_other_pcs?rev=1542192349&do=diff How to install the VPOP3 Status Monitor on other PCs The VPOP3 status monitor icon is run by a separate program from VPOP3, which communicates with VPOP3 using TCP/IP. This means that this program can be installed on any PC which can connect to the VPOP3 computer using TCP/IP (on port 5109 by default). text/html 2026-04-06T17:57:00+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:make_vpop3_redownload_messages_from_isp?rev=1775498220&do=diff How to make VPOP3 re-download POP3 messages from the ISP If you have the VPOP3 Mail Collector setting Leave Mail On Server enabled, then VPOP3 will leave your messages on the ISP POP3 server for the specified number of days after downloading it. If, during this time, you want to make VPOP3 download those messages again, then you can do so. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:not_working_as_expected?rev=1542192349&do=diff Not Working As Expected This is the page to come to if you think you've set something up correctly but it isn't doing what you think it should be doing. If you're getting an error message or some other concrete indication that something has actually 'gone wrong' then the text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:outlook_2007?rev=1542192349&do=diff How to configure Outlook 2007 Email SMTP Authentication To set up SMTP authentication in Outlook 2007, if your VPOP3 requires it, go to Tools -> Account Settings, select your email account and press Change.... Then, press the More Settings... button text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:outlook_2010?rev=1542192349&do=diff How to configure Outlook 2010 In many ways, configuring Outlook 2010 is a similar to configuring Outlook 2007. The biggest difference you are likely to notice is the new “Ribbon” interface, in place of the traditional menu bar (File, Edit, View, etc.) Email text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:performance_requirements?rev=1542192349&do=diff Performance Requirements The performance requirements for VPOP3 depends on many factors, so we can't give specific details for any scenario. How to detect limiting factors * Use the Windows Performance Monitor (perfmon.msc) * Add counters for: text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:problems_accessing_vpop3_settings?rev=1542192349&do=diff Problems accessing VPOP3 Settings If you have problems accessing the VPOP3 settings: * Go to Start -> Programs -> VPOP3 -> Configure VPOP3 on the VPOP3 computer. That should open up a web browser and take you to the login page * If VPOP3 doesn't show the login page, and shows a '403' error page instead, that means that the access restrictions for the WebMail service have been restricted so that this computer cannot access the WebMail service. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:route_mx_sent_direct_outbound_mail_through_your_isp_s_relay_server?rev=1542192349&do=diff Route MX Sent (Direct) Outbound Mail Through Your ISP Some mail providers (for example Hotmail, AOL and GMail) will reject mail sent from servers running on dynamic IP addresses. It is possible to route such mail through your ISP's relay server whilst still sending most mail direct to the recipient server using MX text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:spam_filter_not_working?rev=1542192349&do=diff Spam filter not working If the VPOP3 spam filter appears not to be working at all, the first thing to do is to look at the message headers of an incoming message to see if the spam filter is being run at all. Check to see if a header line beginning with X-VPOP3-Spam text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:stop_vpop3?rev=1542192349&do=diff How to stop VPOP3 You can stop VPOP3 by going to the Services applet in Windows, find the VPOP3 Email Server service and stop it, or, if you have the VPOP3 status monitor running with appropriate permissions, you can right-click that and choose 'Shutdown Server' text/html 2019-11-08T15:37:52+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:upgrade_vpop3_to_version_5?rev=1573227472&do=diff How To Upgrade VPOP3 to version 5 or later Upgrading VPOP3 is usually a straightforward process. Download VPOP3 from our web site and back up your current installation just in case something goes wrong. Then simply run the installer that you downloaded and install it over the top of your existing VPOP3. All your settings and mail will be preserved. text/html 2020-09-03T15:07:34+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:upgrade_vpop3_to_version_8?rev=1599145654&do=diff Upgrading VPOP3 to version 8.x from v7 or earlier VPOP3 v8.x uses PostgreSQL 10 as its database engine, which is the latest supported 32 bit version of PostgreSQL. Later versions of PostgreSQL are 64-bit only, which means we cannot use them while continuing to support 32 bit versions of Windows. text/html 2026-03-18T20:49:54+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:upgrade_vpop3_to_version_9?rev=1773866994&do=diff Upgrading VPOP3 to version 9.x from v7 or v8 VPOP3 v9 and later requires a 64 bit version of Windows 8.1 or later VPOP3 v9.x uses PostgreSQL 18 as its database engine. This can only easily be upgraded from PostgreSQL 9.3 or later, which means it must be an upgrade of VPOP3 v7 or later. If you are using an earlier version of VPOP3, then upgrade it to v8.7 first, then upgrade to v9 or later text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:using_vpop3_with_microsoft_exchange?rev=1542192349&do=diff Using VPOP3 with Microsoft Exchange Server You can link VPOP3 to Exchange Server, so that Exchange Server sends outgoing mail through VPOP3 and VPOP3 sends any incoming mail directly to Exchange Server. You should first of all set up VPOP3 to send and receive Internet email as described in the online help. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:v3_-_move_message_store?rev=1542192349&do=diff How to move the VPOP3 Message Store to a new PC Use this option if you want to have VPOP3 running on one PC, but have the message store database on another PC. Manually Install PostgreSQL on the new PC Download the 'pgInstaller' version of PostgreSQL from the text/html 2018-12-05T15:25:24+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:v3_-_move_message_store_folder?rev=1544023524&do=diff v3/4 - Move the message store to a new folder/drive This guide assumes you want to just move the VPOP3 message store/database to a new folder on the same PC, and leave the VPOP3 installation directory where it is. * Stop VPOP3 * Stop PostgreSQL text/html 2019-11-12T16:09:08+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:v3_-_move_to_a_new_pc?rev=1573574948&do=diff Move VPOP3 Version 3 or 4 to a new PC Moving VPOP3 Version 3 or 4 to a new PC is slightly different from moving earlier versions, because of the database system. The summary of steps is: * Stop VPOP3 on the original PC * Manually make a backup of the database on the original PC text/html 2026-04-21T11:12:40+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:v5_-_move_to_a_new_pc?rev=1776769960&do=diff Move VPOP3 Version 5 (or later) to a new PC Moving VPOP3 Version 5 or later to a new PC is slightly different from moving earlier versions, because of the database system, which was introduced for version 3 and modified for version 5. The summary of steps is: * Stop VPOP3 on the original PC text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:vpop3_does_not_have_write_access_to_the_registry_-_please_check_and_restart_vpop3?rev=1542192349&do=diff Error message: VPOP3 does not have write access to the registry - please check and restart VPOP3 VPOP3 needs to be able to write to the Windows Registry at HKEY_LOCAL_MACHINE\Software\PaulSmith. Usually, VPOP3 will run in the 'Local System' user account which has full permission to the HKEY_LOCAL_MACHINE part of the registry. However, it is possible to lock down permissions further, or to run VPOP3 in a different user account. In that case, you may encounter this error message. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:vpop3_is_responding_slowly?rev=1542192349&do=diff VPOP3 Is Responding Slowly If VPOP3 is responding slowly to users there are several common causes: * The VPOP3 server disk may be badly fragmented. Defragment the server disk(s). Note that sometimes the Windows defragmenter will say that the disk doesn't need defragmenting even if it does, so it is best to do it anyway. Also, there is a better free defragmenter available called text/html 2026-01-05T09:31:47+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:vpop3_re-downloading_old_messages_from_isp_pop3_server?rev=1767605507&do=diff VPOP3 re-downloading old messages from the ISP POP3 server If you tell VPOP3's POP3 mail collector to leave messages on the ISP's server for a few days, you may find that sometimes VPOP3 will redownload all the messages from the ISP mailbox again.