https://wiki.pscs.co.uk/ 2026-05-06T04:30:48+00:00 https://wiki.pscs.co.uk/ https://wiki.pscs.co.uk/_media/wiki:dokuwiki.svg text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:pop3_collection?rev=1542192349&do=diff POP3 Mail Collection POP3 Mail Collection is when VPOP3 will collect mail from an external POP3 mailbox - for instance, from an Internet Provider. POP3 General This page tells VPOP3 how to collect mail. * POP3 Server Address - this is the name (or IP address) of the POP3 server from which you want VPOP3 to collect mail text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:sender_advanced_settings?rev=1542192349&do=diff Mail Sender Advanced Settings Mail Connectors -> Mail Senders -> (name) -> Advanced Advanced Domain Filtering For VPOP3 v6.11 and later, see the Domain Filtering section of the user manual. The Domain Filtering box lets you restrict which email messages are sent via this Mail Sender. You specify each rule on a separate line, and the message will be sent if it matches any sender rule text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:user_prune_rules?rev=1542192349&do=diff Prune Rules The Edit User -> Prune Rules tab can be used to create/edit rules which cause messages to be automatically deleted according to specified criteria. To add or edit a “prune rule”, press the Add Rule button. This will add a new rule to the table, with a set of default settings. Don't worry, this rule doesn't take effect until you press the Submit button. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:misc_advanced?rev=1542192349&do=diff Misc -> Advanced Tab Settings -> Misc Settings -> Advanced You will normally not need to change any settings on this page unless VPOP3 technical support have suggested it. If you do make changes, and want to go back to the original settings, the Restore Defaults button will restore the settings to their defaults. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:quarantine_viewer?rev=1542192349&do=diff Spamfilter Quarantine Viewer Settings -> Spamfilter -> Quarantine Viewer The Quarantine Viewer lets you see messages which have been quarantined by the VPOP3 Spam Filter. As an administrator you can see quarantined messages for any user, and release them if appropriate. If you release a message, it will be sent into the original recipient's Inbox, not into your Inbox. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:mail_tab?rev=1542192349&do=diff Mail tab The Mail tab within VPOP3 webmail enables you to manage your sent and received messages. As you can see from the screenshot, the page is divided into three main sections: Menu bar General tab bar Status bar [Mail tab - VPOP3 Version 5 Webmail] Page structure Mail toolbar The Mail toolbar contains the following buttons: text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:message_monitoring?rev=1542192349&do=diff Message Monitoring Message monitoring in VPOP3 will tell VPOP3 to send a copy of all the outgoing, internal and/or incoming mail from/to specified users to be sent to another specified user. In the current versions of VPOP3, all monitored messages are sent to the same user (or list), you cannot specify different recipients for different monitored users. (This may be something that is added/enhanced in the future) text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:archive_offline?rev=1542192349&do=diff Message Archive -> Offline Tab Settings -> Message Archive -> Offline Tab. The Offline tab lets you tell VPOP3 to move old archived messages to an alternative store, such as CD/DVD or external drive etc. VPOP3 will create a ZIP file containing the old messages. The archive index will still remember the messages, and the name of the ZIP file they are contained in, so you will still be able to search for messages on date, sender, subject, etc, but not on the message content. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:archive_general?rev=1542192349&do=diff Message Archive -> General Settings -> Message Archive -> General Tab Archive Messages If the Archive Messages box is checked, then VPOP3 will archive incoming and outgoing messages. Main Archive Store Directory You can set the message archive store to any directory accessible by the VPOP3 service. Enter the path in the text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:attachment_processing?rev=1542192349&do=diff Settings -> Attachment Processing The Attachment Processing page allows you to configure VPOP3 to perform two distinct functions on messages that contain attachments: * * Filtering The Filtering tab is divided into four main sections: Attachment Filtering text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:database_restore?rev=1542192349&do=diff Database -> Restore Tab This tab is only in VPOP3 Enterprise (v5 and later), and is for performing a partial (mailbox/mail folder) restore of the database. To do a full restore of the database, or for VPOP3 Basic/Standard, see the “Restore a Backup of VPOP3” topic Using the text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:whats_new_in_version_5_webmail?rev=1542192349&do=diff What's new in version 5 webmail? This is a list of some of the most noticeable changes to VPOP3's webmail interface for version 5. For a more detailed list of changes, view our bugtracker. [VPOP3 Version 5 - mobile compatible webmail] Mobile compatible webmail If you access version 5 webmail from a mobile device, you will probably be redirected to the mobile compatible version. It is a cut-down version of Webmail, which retains the key features, but doesn't utilise the extra features which w… text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:admin_settings?rev=1542192349&do=diff Settings -> Admin Settings The Admin Settings page allows you to perform three key functions: * * * Choosing a Main Administrator The Main Administrator receives notification emails, such as daily reports and errors/problems which may require manual intervention. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:message_archive?rev=1542192349&do=diff Message Archive The Message Archive facility is for VPOP3 to store copies of all messages sent or received. It stores the messages in a central archive store which can be searched by an administrator. The prime purpose of the archive facility is for recording messages in case of possible disputes, as you can see what was sent/received by email. It can also be used as a backup/restore facility in an emergency, but that is not its prime purpose, so it is better to have a proper text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:database_message_store?rev=1542192349&do=diff Database -> Message Store Tab This tab says how VPOP3 handles its message store Message Store The Delay while moving messages setting tells VPOP3 how quickly to import messages into the new database structure if it was upgraded from version 2.x or earlier. Usually this is OK to be left as it is, but if there is some special requirement to import the messages more quickly, you can decrease this number, but that will increase the load on the server. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:list_messages_in_lan_forwrding_queue_waiting_to_go_to_a_specific_server?rev=1542192349&do=diff Database query to list messages in the LAN forwarding queue waiting to go to a specific server The VPOP3 settings show the first 100 messages in the LAN forwarding queue. Usually this is sufficient as the LAN forwarding queue is usually nearly empty, but in case of a problem it may be much bigger. The database queries below let you list just messages going to a specific server. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:user_message_rules?rev=1542192349&do=diff Message Rules The Edit User -> Message Rules tab can be used to create/edit rules which are processed when messages arrive in a User's mailbox. They can be used to copy messages, mark them as read, delete them, etc VPOP3 will process Message Rules in the order they appear in the list. If you want to change the order of the rules, you can drag & drop them into the correct order. Usually when VPOP3 has processed a rule, it will go on to check further rules, but you can use the text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:list_all_messages_in_lan_forwrding_queue?rev=1542192349&do=diff Database query to list ALL messages in the LAN forwarding queue The VPOP3 settings show the first 100 messages in the LAN forwarding queue. Usually this is sufficient as the LAN forwarding queue is usually nearly empty, but in case of a problem it may be much bigger. The database queries below may help in that situation. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:logdb_recipients?rev=1542192349&do=diff LogDB.Recipients table The LogDB.Recipients table contains a record of the recipients for messages logged by VPOP3. A message may have one or more recipients Columns * rcptid - this is a bigint sequential value which identifies the recipient uniquely in the database text/html 2025-08-14T09:24:55+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:lua_smtp_relay_control?rev=1755163495&do=diff Lua SMTP Relay Control Every time VPOP3 is going to send messages via SMTP Relay, it runs a script called relayout.lua in the VPOP3 directory. Global Variables This script may have global variables, depending on your version of VPOP3. In VPOP3 3.0.0L and later, there are two read-only global variables set at the start of the script: text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:quarantine_tab?rev=1542192349&do=diff Quarantine tab The Quarantine tab within VPOP3 webmail is where you view and manage messages that have been quarantined by VPOP3's spam filter. As you can see from the screenshot, unlike many of the other webmail tabs, it is not divided into multiple sections: text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:user_advanced?rev=1542192349&do=diff User Advanced settings The Edit User → Advanced tab contains some 'advanced' settings for a VPOP3 user. Message Recycle Bin In VPOP3 Enterprise (v5 and later) the Message Recycle Bin will keep messages in the message store for a short time after the user has deleted the messages. This is to allow easier recovery from the inevitable case where a user has deleted messages by mistake, and wants them back. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:users?rev=1542192349&do=diff Users The Users page shows the list of users, as well as giving you some actions which you can perform use the user list. * Import users from file * Import users from Windows * Export users to file * Bulk Add Users * Edit User Welcome Message * Send Admin Message * Edit a User User List Outgoing Messages Just above the main user list is an entry Outgoing Message Queue. Clicking on this will let you see which messages are waiting to be sent out, and you can delete/ text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:webmail_menu?rev=1542192349&do=diff Webmail Menu bar The Webmail Menu bar within VPOP3 webmail enables you to quickly perform relevant actions. The Menu has six main headings; of which, three have multiple options. Option Active Function V Notes Message Mail and View Message tabs Opens/closes Message menu text/html 2023-01-18T15:57:13+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:spam_filter_rules?rev=1674057433&do=diff Spam Filter Rules VPOP3 Versions 2.1.7 and later have a built-in spam filter system which supports a simple script language optimised for content- and spam-filtering of email messages. This reference contains a definition of the spam filtering script language supported by VPOP3. Note that as later versions of VPOP3 are released, more language features may be added, so this reference indicates in which version of VPOP3 a particular feature was added. text/html 2026-03-16T11:02:32+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:useful_database_queries?rev=1773658952&do=diff Useful Database Queries Below are some database (SQL) queries which may be useful in some situations. You can run these from the 'psql' program at the command prompt. Some can also be run from the Settings -> Database -> Query page in the VPOP3 settings. text/html 2023-03-27T10:32:18+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:user_routing_script?rev=1679913138&do=diff User Routing Script If there is a <username>/user_redirect.lua script, this Lua script can override VPOP3's message routing options. You can edit this either in the Settings -> Scripts page in the settings, or via the 'Routing' tab in the user's settings in the VPOP3 administration console. This script affects how VPOP3 will handle how messages text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:address_book_tab?rev=1542192349&do=diff Address Book tab The Address Book tab within VPOP3 webmail enables you to manage your lists of contacts and add those contacts into a new or existing message. Substantial alterations to the interface were introduced in version 5. Both interfaces are documented. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:incoming_smtp?rev=1542192349&do=diff Incoming SMTP Mail If you have an incoming SMTP mail feed, then the mail server sending mail to you will connect to your VPOP3 computer to send the mail. The mail connection is controlled by the sending computer. IMPORTANT If you have a permanent Internet connection with a static IP address, the usual way of having incoming SMTP is to configure your text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:lan_forwarding_queue_status?rev=1542192349&do=diff LAN Forwarding Queue Status To view the LAN Forwarding Queue Status, go to Settings -> Local Mail -> LAN Forwarding -> Queue Status The LAN Forwarding Queue shows the messages which VPOP3 has currently got queued to be sent to another mail server on your network using SMTP. The LAN Forwarding Queue status page shows a simple list of the messages waiting to be sent. The four columns in the table show: text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:lists?rev=1542192349&do=diff Lists The Lists section in VPOP3 lets you view and manage the various types of 'List' which VPOP3 supports * Distribution Lists * Mailing Lists * Forwardings * ODBC Mailing Lists * Groups Using a list A list will contain zero or more 'members' (usually email addresses) which can be messaged all at once. To send a message to all the members of a list, you will usually send an email to the listname at a valid domain. text/html 2025-05-08T08:23:35+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:lua_smtp_server_script?rev=1746692615&do=diff SMTP Server Lua Scripting The SMTP Server Lua Script is called SMTPSVR.LUA and can be edited from the Settings -> Scripts page in the VPOP3 settings. This script is called whenever an instance of the VPOP3 SMTP server is launched - ie whenever someone opens a connection to port 25 on the VPOP3 server to send it a message, whether from a local user or an incoming SMTP message. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:sender_advanced_relay_settings?rev=1542192349&do=diff Mail Sender Advanced Relay Settings SMTP Return Address The SMTP Return Address (or Return Path) is a hidden part of a message which says where bounce messages (and other automated responses) should be sent. (It is not the same as the Reply address text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:smtp_filtering?rev=1542192349&do=diff SMTP Service - Filtering The SMTP Server -> Filtering tab lets you set up filtering of messages going through the VPOP3 SMTP service. This may be incoming SMTP messages, or locally sent messages. SMTP Rules SMTP Rules let you create custom rules for processing messages as they go through the VPOP3 SMTP service. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:spamfilter_script_configuration?rev=1542192349&do=diff Spamfilter Script Configuration tab You reach this tab by going to Settings --> Spam Filter -> General, and then choose the General tab. The Spamfilter script has various settings that can be changed to alter the behaviour of the spamfilter. These are defined in the script, so may change with different versions of the script. The settings are currently: text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:database_files_used_in_vpop3_2.x?rev=1542192349&do=diff Database files used in VPOP3 2.x VPOP3 2.x usually uses SQLite 2.8.3 as its database engine. This stores databases in discrete *.db files in the VPOP3\_database directory on the server PC. We do not recommend that you access these databases directly unless you know what you are doing, and we strongly discourage the alteration of data in the databases directly unless technical support request you to. text/html 2019-07-08T08:19:02+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:find_biggest_messages?rev=1562573942&do=diff Find biggest messages To find the 10 biggest messages in your VPOP3 message store: Go to Settings → Database → Query Alternatively, at a command prompt in the VPOP3 directory run psql (The password is 'vpop3pass') Then, type SELECT username, folder, subject, fromaddr, PG_SIZE_PRETTY(size) FROM messages.messages INNER JOIN messages.folders f USING(folderid) INNER JOIN users.users u ON u.usernumber=f.userid ORDER BY size DESC LIMIT 10; text/html 2026-03-16T11:12:42+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:group_a_user_s_folders_into_letter_groups?rev=1773659562&do=diff Group a user's folders into letter groups This is useful in VPOP3 Enterprise if you have a large folder with many subfolders and want to group the subfolders into other subfolders based on their first letter For example, if you have * Customers text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:groups?rev=1542192349&do=diff Groups In VPOP3 a 'group' is mainly an administrative feature. If you only wish to have a list of email addresses to send messages to under one address, you should use the 'List' feature instead. The main function of Groups is to let you set certain user attributes for a whole group of users at once. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:reset_message_folder_counts?rev=1542192349&do=diff Reset Message Folder Counts In extremely rare cases, the mail folder message counts in the database may get out of step with the actual stored messages. There are database triggers which will keep the counts in sync during normal operation, but if you have to manipulate the database directly (eg to recover from a corrupted database) it is possible that they will get out of step. text/html 2020-10-05T16:14:12+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:spamrules_header?rev=1601914452&do=diff Increase the spam score for header marker This script is for the case where your ISP adds a header eg 'X-Spam: Yes' to the message header, and you want the VPOP3 spamfilter to quarantine messages with that marker. Add the following to the spamrules_userchecks.txt file. This script file only gets processed on incoming messages (the spamrules_localmail.txt script ends the processing of locally sent messages) text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:alter_lan_forwarding_queued_messages_going_to_one_server_to_go_to_another?rev=1542192349&do=diff Database query to alter LAN Forwarding rules for one server to go to another If a LAN forwarding destination server fails, you may wish to change the queued messages to go to the new server. (Note that, if planning ahead, it may be easier to use DNS text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:import_users_from_file?rev=1542192349&do=diff Import Users From File VPOP3 supports the importation and exportation of users, via a CSV file (see for a specification of the CSV file format). NOTE: This process is not designed to provide a complete backup of user data, nor is it intended to facilitate moving VPOP3 to a new computer. Instead, see the following relevant pages: text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:listserver_commands?rev=1542192349&do=diff ListServer Commands The ListServer is an automated process in VPOP3 which manages mailing lists. People can send commands to the ListServer to perform various functions remotely. Whether these commands are allowed, and exactly how they work depends on the particular mailing list's settings. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:listserver_settings?rev=1542192349&do=diff ListServer Settings Settings -> ListServer Settings In VPOP3, the ListServer is an automated 'user' which handles mailing list requests, such as subscribe & unsubscribe commands. Anyone can send an email to the ListServer to subscribe to (public) mailing lists, or unsubscribe from mailing lists they are on, or see a list of public mailing lists etc. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:logging?rev=1542192349&do=diff Logging Activity Summary Reports You can tell VPOP3 to send you a daily summary report each day. To do this check the box to say Send daily summary logs to, and choose the appropriate user (or “Main Administrator” if you want the reports to be sent to the text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:make_lan_forwarding_immediately_attempt_to_dequeue_all_pending_messages?rev=1542192349&do=diff Database query to make LAN Forwarding immediately attempt to dequeue all pending messages If VPOP3 cannot send messages using LAN Forwarding it will queue the message and retry periodically. Usually there is no need to do anything special if there was a problem with the onward mail server which has now been fixed, VPOP3 should soon retry the messages automatically (based on the value of the text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:msgaudit?rev=1542192349&do=diff msgaudit Database table This can (optionally) contain data showing how messages have been handled (eg deleted, moved, etc) * id - incrementing ID of msgaudit entry * datetime - the date & time the event occurred * component - which VPOP3 component performed the event text/html 2024-03-21T10:49:54+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:outgoing_message_script?rev=1711018194&do=diff Outgoing Message Scripting Every time VPOP3 adds a message to the Outgoing mail queue, it runs a script called outmessage.lua. Scripts are stored as files in the VPOP3 directory in VPOP3 v6.6 and earlier, or managed through the Settings -> Scripts page in VPOP3 v6.7 and later. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:reports?rev=1542192349&do=diff Reports The Reports tab lets you access various reports about VPOP3 or message history. For many of reports to work, you need to have previously enabled historical logging. The currently available reports are listed below. To view a report, click on its name at the left of the page text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:send_admin_message?rev=1542192349&do=diff Send Admin Message It is possible for administrator users to send a bulk email message to an entire group or list. To begin composing an email, go to the Administration Settings -> Users page, and click Send Admin Message. This should then open a window, which allows you to specify various options. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:smtp_advanced?rev=1542192349&do=diff SMTP Service -> Advanced Tab Services -> SMTP Server -> Advanced Tab Refuse SMTP Connections from This setting should be rarely needed, and should be normally left blank. It is here for historic purposes. If you put some text in this box, then VPOP3 will refuse any SMTP connections from clients whose 'HELO'/'EHLO' command data contains the text specified here as a substring. Eg, if this setting is set to '.myisp.com', then VPOP3 would refuse SMTP connections from any client which sends the c… text/html 2021-12-13T15:20:04+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:spamrules_addfixedtexttosubject?rev=1639408804&do=diff Use the spam filter scripting to add fixed text to the subject on incoming messages This needs VPOP3 version 5 or later. This script allows you to add fixed text to the subject an incoming message, eg so that users can see that a message is an incoming rather than local message (be aware of weaknesses in this strategy - eg forwarded messages, spoofing of the marker, breaking DKIM message signatures, etc) text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:spamrules_subject?rev=1542192349&do=diff Increase the spam score for subject marker This script is for the case where your ISP adds a marker eg '[spam]' to the message subject, and you want the VPOP3 spamfilter to quarantine messages with that marker. Add the following to the spamrules_userchecks.txt file. This script file only gets processed on incoming messages (the spamrules_localmail.txt script ends the processing of locally sent messages) text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:status_monitor?rev=1542192349&do=diff VPOP3 Status Monitor The VPOP3 status monitor allows users to see what VPOP3 is doing, and also, optionally, to send/receive simple 'instant messages' between local users. Different users can have different permissions for the status monitor. They can be set for all administrators or non-administrators on text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:webmail_tabs?rev=1542192349&do=diff Webmail Tabs From version 4 onwards, VPOP3 webmail has a tabbed structure, which enables you to move between various screens with minimal effort. By using tabs, the entire webmail can be loaded in one go - so there is no need to waste time and bandwidth by downloading the same key components each time you switch between the various parts of the webmail. text/html 2023-11-20T10:18:01+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:error_handling_script?rev=1700475481&do=diff Error Handling Scripting For most error messages that VPOP3 generates, it allows control of error messages, eg to limit the frequency of error messages if they would be generated repeatedly. These limits are set in Settings -> Admin Settings -> Message Control. However, if you want more granular control, you can use Lua scripting for more fine-grained control text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:logdb_messages?rev=1542192349&do=diff LogDB.Messages table The LogDB.Messages table contains a record of all messages logged by VPOP3. A message is logged when a message is sent/received/etc. Columns * msgid - this is a bigint sequential value which identifies the message uniquely in the database text/html 2019-08-27T16:13:40+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:lua_monitor_script?rev=1566922420&do=diff Monitor Scripting (Added in V6.15) This script has three functions: * MonitorIncoming * MonitorInternal * MonitorOut The functions are similar, except they are called when different messages are to be monitored (incoming, internal and outgoing messages respectively). text/html 2026-02-24T15:49:48+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:lua_smtp_mx_control?rev=1771948188&do=diff Lua SMTP MX Control Every time VPOP3 is going to send messages using direct MX sending, it runs a script called mxout.lua which can be created/edited in Settings -> Scripts (or in the VPOP3 directory in VPOP3 v6.6 or earlier). Global Variables Starting with v8.8, the following global variables are defined: text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:smtp_reputation_stats?rev=1542192349&do=diff SMTP Reputation Stats (Added in v6.20) If you receive email by direct incoming SMTP (not via an ISP or filtering service) then you can tell VPOP3 to report sender reputation statistics back to VPOP3. This is enabled/disabled in the Settings -> Misc Settings page. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:spamrules_addrandomtexttosubject?rev=1542192349&do=diff Use the spam filter scripting to add random text to the subject on incoming messages This needs VPOP3 version 5 or later. This script is for the case where you want a message to the 'support' user to have the text [XXX-99999] added to an incoming message's subject if it does not already exist. Some people want this text to use as reference numbers for a text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:spamrules_checkrecipient?rev=1542192349&do=diff Increase the spam score for certain recipients This script is for the case where you want certain recipients to have a weighted score. For instance if you have users who have left and who mostly receive spam, but you don't want to reject their mail totally. text/html 2022-01-25T11:59:27+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:spamrules_ipwhitelist?rev=1643111967&do=diff Allow messages through from a specific IP address This script allows messages through the spam filter if they arrive at VPOP3 from a specific SMTP sender (only when the message is sent directly to VPOP3 using SMTP, not via another server). Add the following to the spamrules_userlocal.txt file. This script file gets processed on all messages. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:spamrules_longsenderdomain?rev=1542192349&do=diff Spamrules example - increase spam score for long sender domain This script is for the case where you to increase the spamminess of emails where the sender's email address contains a long domain. In this case we'll say if the sender's domain has 20 or more characters in the first section (between the @ and first .). Note that we do not necessarily recommend that you do this as it is not a very good indicator of spam, but it is something we've been asked for, so here it is. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:spamrules_manylinks?rev=1542192349&do=diff Spamrules example - increase spam score if there are many links in the email This script is for the case where you to increase the spamminess of emails where the email contains many links - in this case we'll say if the email contains 10 or more links. Note that we do not necessarily recommend that you do this as it is not a very good indicator of spam, and will probably catch a lot of newsletter type emails, but it is something we've been asked for, so here it is. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:status?rev=1542192349&do=diff Status The VPOP3 Status screen has two tabs * Server Status * Sessions Server Status The Server Status tab is essentially a copy of the VPOP3 Status Monitor information. * Connection Status - this shows the 'online' status of VPOP3. If it says idle, it does not mean VPOP3 is not working, or not doing anything, it just means that it is not currently sending or collecting mail from the Internet. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:user_routing?rev=1542192349&do=diff User Routing Options Assistant The assistant for a user is an email address (or set of email addresses, separated by semicolons) where incoming messages to this user will be copied or redirected. Normally messages will be copied to the assistant, but if the text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:vpop3.getfolders?rev=1542192349&do=diff VPOP3.GetFolders Lua function The Lua management function 'VPOP3.GetFolders' retrieves a table containing all the mail folders for a specified user. VPOP3.GetFolders(username); It returns a table where the key is the folder name (in IMAP4 UTF-7 encoded format - see text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:archive_search_results?rev=1542192349&do=diff Message Archive -> Results Tab Settings -> Message Archive -> Results tab The Results tab only exists if you have previously done a search operation and are viewing the results of that search. The Results page shows you a list of the messages (up to 1000 entries are available) returned by the search. You can select multiple entries by using shift+click or ctrl+click text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:autoresponders_v3_v4?rev=1542192349&do=diff Autoresponders - v3 and v4 This section lets you define an autoresponder for a user. An autoresponder is a message which is sent back in response to a message which arrives in this user's mailbox. The Autoresponder Type can be set to None, Simple Autoresponder text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:download_rules?rev=1542192349&do=diff Download Rules Download rules are a facility in VPOP3 where it can look at message summary information before downloading a message from an ISP POP3 mailbox (they do not work on incoming SMTP messages - use SMTP Rules for that) To edit download rules, go to text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:find_message?rev=1542192349&do=diff Find a message If you know the subject of a message, you can search the entire message store for messages with this subject. Go to Settings → Database → Query Alternatively, at a command prompt in the VPOP3 directory run psql (The password is 'vpop3pass') text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:global_signature?rev=1542192349&do=diff Global Signature You can set a Global Signature in VPOP3 by going to Settings -> Global Signature The Global Signature option lets you tell VPOP3 to add a standard piece of text or HTML to the bottom of all outgoing messages. You can create just a plain text, or text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:imap4_advanced?rev=1542192349&do=diff IMAP4 -> Advanced tab This page is reached from Services -> IMAP4 Server, then the Advanced tab. Here are some advanced options for the IMAP4 service in VPOP3 Fake access to inaccessible mailboxes In the IMAP4 service you may have folders which do not exist. For instance, if you are accessing a shared Inbox folder from a user called 'Karen', then their folder will be called text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:lan_forwarding?rev=1542192349&do=diff LAN Forwarding LAN Forwarding is a feature of VPOP3 where it can send messages to another mail server using SMTP. This other mail server is usually on your local network (LAN), hence the name, but it can actually be anywhere that has a permanent network connection to VPOP3. VPOP3 will send messages using text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:logdb?rev=1542192349&do=diff LogDB database schema The LogDB database schema contains historical logging information for reports etc. Entries are added to this by several components of VPOP3, and the 'reporting' section uses the data here. The LogDB database is only populated if the ' text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:logdb_attachments?rev=1542192349&do=diff LogDB.Attachments table The LogDB.Attachments table contains a record of the attachments for messages logged by VPOP3. A message may have zero or more attachments Columns * attachid - this is a bigint sequential value which identifies the attachment uniquely in the database text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:logdb_spamrules?rev=1542192349&do=diff LogDB.SpamRules table The LogDB.SpamRules table contains a record of the spamfilter rules which matched for messages logged by VPOP3. A message may have zero or more spamrules entries Columns * spamruleid - this is a bigint sequential value which identifies the spam rule entry uniquely in the database text/html 2023-08-16T07:48:01+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:lua_pop3_client_script?rev=1692172081&do=diff POP3 Client Lua Scripting The POP3 Client Lua Script is called POP3CLT.LUA and is edited in Settings -> Scripts. This script is called whenever VPOP3 runs a POP3 session to download messages from a remote POP3 server. VPOP3 will call the following Lua functions in the script at the following times: text/html 2026-02-24T15:50:03+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:lua_smtp_mx_server_rules?rev=1771948203&do=diff Lua SMTP MX Server Rules Every time VPOP3 checks for remote MX server for sending messages using direct MX sending, it runs a script called mxserverrules.lua which can be created/edited in Settings -> Scripts (or in the VPOP3 directory in VPOP3 v6.6 or earlier). text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:mappings?rev=1542192349&do=diff Mappings In VPOP3, Mappings are a way of explicitly linking an email address to a user or list. They can also be used to indicate that an email address is remote, even though it would otherwise appear to be a local email address. In other email servers, a similar feature may be called 'aliases' text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:new_message_tab?rev=1542192349&do=diff New message tab The New message tab within VPOP3 webmail is where you prepare, edit and send messages, including replies and forwards. As you can see from the screenshot, the page is divided into two main sections: Menu bar General tab bar Status bar [New message tab - VPOP3 Version 5 Webmail] Page structure New message toolbar text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:sender_direct_settings?rev=1542192349&do=diff SMTP Direct Sender Settings Mail Connectors -> Mail Senders -> SMTP Direct Sender -> Settings tab The SMTP Direct Settings tab lets you set how VPOP3 will send mail using SMTP Direct DNS Servers to Use This setting tells VPOP3 the IP addresses of the DNS servers it should use to find the recipients' mail servers. Separate multiple addresses with commas. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:sent_message_summary?rev=1542192349&do=diff Sent message summary This will display the number of messages sent and total size over the past month. (It counts each recipient as its own message). You must have Historical Logging enabled in VPOP3 (Settings -> Logging) At a command prompt in the VPOP3 directory run text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:smtp_general?rev=1542192349&do=diff SMTP -> General tab This page is reached from Services -> SMTP Server, then the General tab. This page lets you set general settings for the SMTP service component of VPOP3. The SMTP service is how users send outgoing mail, and how incoming SMTP messages arrive. Service Name text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:smtp_load_limiting?rev=1542192349&do=diff SMTP -> Load Limiting tab This page is reached from Services -> SMTP Server, then the Load Limiting tab. Here you can set limits on how many active SMTP sessions there are, and other related settings. This lets you limit the load on the VPOP3 server. This is especially important if VPOP3 is performing spam filtering on incoming SMTP messages, because the spam filter can add considerable load. You can reduce the spamfilter load by using the text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:user_permissions?rev=1542192349&do=diff Permissions This section lets you configure the permissions that a particular user has. Allowed Protocols The Allowed Protocols section lets you specify which services this user has access to. Note that these settings affect access to the whole service. If you want users to be able to access a service from some IP addresses, but not from others, then use the text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:webmail_status_bar?rev=1542192349&do=diff Webmail Status bar The Status bar within VPOP3 webmail displays important information at a glance. [VPOP3 version 5.0 Webmail Status bar] User - At the far left, is a display to let you know which user is currently logged in. Version - After the username, there is an indication of the current VPOP3 version. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:about?rev=1542192349&do=diff About The VPOP3 'About' page lets you see the version and build number of your VPOP3 installation, along with any licence details, and supplier details (if any) Licence Information The Licence Information section shows your current licence information text/html 2023-03-25T23:33:31+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:archive_script?rev=1679787211&do=diff Archive Script (from VPOP3 v6 onwards) Archive scripting lets you indicate whether full message content should be stored in the message archive. This could be used, for instance, for filtering out messages containing credit card details. The message headers will still be archived, along with the explanation text returned by the script. text/html 2026-03-23T15:29:29+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:autoresponder_global_script?rev=1774279769&do=diff Autoresponder Global Scripting For scripting to modify the autoresponder text which is embedded in the autoresponder itself, see Autoresponder Scripting The Autoresponder Global Script is executed for every autoresponse. It is stored in the 'Autoresponder.lua' script in Settings → Scripts text/html 2025-05-28T09:24:38+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:autoresponder_script?rev=1748424278&do=diff Autoresponder scripting For scripting to alter the whole autoresponder definition and set in the VPOP3 settings rather than embedded in an autoresponder itself, see Autoresponder Global Scripting In an autoresponder, you can create a Lua script by surrounding it with <lua> & </lua> tags, eg text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:database_schema_used_in_vpop3_5.x?rev=1542192349&do=diff Database schema used in VPOP3 5.x Note that all information in this section is subject to change. We do not guarantee that the database schema will remain constant, even between minor upgrade versions, so use this information at your own risk. Do not alter the database schema used by VPOP3 (including indexes, triggers & functions) or your whole VPOP3 data store may collapse. text/html 2023-11-12T09:51:40+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:dmarc_reporter_script?rev=1699782700&do=diff DMARC Reporter Script (from VPOP3 v8.6 onwards) This script lets you customise how VPOP3 sends DMARC reports to the sending domain. This can be useful in case the sending domain's DMARC configuration is incorrect as that can cause errors sending the reports or cause messages to be 'stuck' in VPOP3's Outqueue. These problems won't cause any lasting damage, but may be inconvenient or annoying, so you can alter the behaviour using Lua scripting text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:list_failed_message_send_summary?rev=1542192349&do=diff Database query to list failed message sends This will list failed outgoing messages from the last 3 days (with the default VPOP3 settings) At a command prompt in the VPOP3 directory run psql (The password is 'vpop3pass') Then, type select created,returnpath,subject,username || '@' || domain as recipient, latesterror from outqueue.outrecipients inner join outqueue.outmessages using(msgid) where failedtime is not null order by created desc; text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:local_mail_general?rev=1542192349&do=diff Settings -> Local Mail -> General The Local Mail -> General page allows you to configure a few simple, but fundamentally important settings. Default Domain In the majority† of cases, this is the domain name that VPOP3 will use when sending automated messages; for instance, users may receive a message from text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:logdb_sessions?rev=1542192349&do=diff LogDB.Sessions table The LogDB.Sessions table contains a record of all 'sessions' logged by VPOP3. A session is something like a POP3 server session as an email client downloads messages, or an SMTP client session as VPOP3 sends a message out to the Internet, and so on. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:mail_connectors?rev=1542192349&do=diff Mail Connectors Mail Connectors tell VPOP3 how to send and receive mail from the outside world, or other mail servers. This page lets you set: * Connections - how VPOP3 connects to the outside world * Mail Collectors - how VPOP3 collects mail from remote mail servers * text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:management_scripting?rev=1542192349&do=diff Management Scripting In VPOP3 Enterprise, from version 6.17 there is the facility to run Lua scripts manually or according to a schedule. These scripts can do things like access mail folders & messages and perform some maintenance on them. Creating a new script text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:message_headers?rev=1542192349&do=diff Message Headers This article describes some of the headers which VPOP3 can add to messages. Note that some of these may be added by customisable scripts used by VPOP3, so may not match exactly, but the descriptions below are for the defaults distributed with VPOP3. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:offline_archive_error_messages?rev=1542192349&do=diff Offline Archive Error Messages * (2) ZIP file structure invalid (eg disk corruption) * (3) Out of memory * (4) Internal logic error in ZIP compressor * (8) ZIP file invalid or insufficient memory * (10) Temporary File failure * (11) Input file read failure (eg virus scanner blocking access to archived files) text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:scheduling_management_scripts?rev=1542192349&do=diff Scheduling Management Scripts VPOP3 runs a script called scheduler.lua in the background, it will periodically call functions in this script at approximately 1 minute, 5 minute, 1 hour and 1 day intervals. These times are only approximate so should not be relied upon for timing. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:settings?rev=1542192349&do=diff Settings * Admin Settings * Anti-virus * Attachment Processing * Autoresponder Settings * Database * Diagnostics * FaxServer * Global Address Book * Global Signature * Groups * Header Processing * Receipts/Urgent Messages * Global Header Modifiers * Legacy Extensions * Listserver Settings * Local Mail * General * Domain Mappings * LAN Forwarding * Configuration * Queue Status * Logging * Message Archive * Message Monitoring * Misc Se… text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:smtp_direct?rev=1542192349&do=diff Mail Connectors -> Mail Senders -> SMTP Direct VPOP3 can be configured to send mail directly to the recipient's mail server (or the recipient's mail service provider). Usually this is only used if you have a high-end business class Internet connection - such as a leased line, or your mail server is co-located in a data centre. Attempts to use SMTP Direct sending on a dial-up/ADSL/Cable/FTTC/etc connection may be problematic since the receiving mail server may think you a home user who has been … text/html 2026-03-26T11:41:59+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:smtp_rules_script?rev=1774525319&do=diff Lua SMTP Rules Scripts When VPOP3 is processing SMTP Rules for messages received by SMTP, it runs a script called smtprules_(x).lua, where (x) is replaced by the numeric ID of the SMTP service VPOP3 processes SMTP Rules at least three times for each message - once when MAIL FROM has been received, once for each RCPT TO, and once when the whole message data has been received. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:smtp_server?rev=1542192349&do=diff SMTP Server This page lets you configure the SMTP server component of VPOP3. This is how users send mail (either outgoing or internal), and also how VPOP3 receives incoming SMTP messages. In VPOP3 Enterprise, you can create multiple SMTP servers with different settings for instance, to allow SSL connections for local users using the older text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:spamfilter_whitelist?rev=1542192349&do=diff Spamfilter.Whitelist table The Spamfilter.Whitelist table contains the spamfilter whitelist entries which do not contain wildcards or regular expressions. They are separated out to speed up checking. Columns * address - this is the email address in the whitelist text/html 2023-08-14T16:01:01+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:spamrules_variables?rev=1692028861&do=diff Spam Filter Rules: Variables The VPOP3 spam filter script language supports simple variables. In most places these are specified as ${<variable name>}, but in some places they are just specified as <variable name> - for instance where a statement always puts its result into a variable. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:user_autoresponder?rev=1542192349&do=diff Autoresponder An autoresponder is a way of automatically replying to messages as they arrive in a user's mailbox. In VPOP3, an incoming message must arrive in a user's mailbox for the autoresponder to trigger. If you use forwards, assistants, mappings, etc to divert a message before it arrives in the mailbox, the autoresponder will never trigger. If you want to use an autoresponder, but not keep the original message, then make sure the message arrives in the mailbox (eg by using an 'Assistant'… text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:user_delivery_script?rev=1542192349&do=diff User Delivery Script (VPOP3 v6.5 or later) If there is a <username>/delivery.lua script, this Lua script can override VPOP3's message delivery options. You can edit this in the Settings -> Scripts page in the settings. This script affects how VPOP3 will handle how messages being delivered to this user are handled. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:version_4_webmail?rev=1542192349&do=diff VPOP3 Webmail Help Webmail is a way of accessing your mail using a normal web browser. It is designed to be close in functionality to a 'normal' email client, so should be straightforward to use. If you use VPOP3 Enterprise, then the mail visible through the web browser will be the same as that visible through your IMAP4 email client - the IMAP4 client will synchronise with Webmail. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:vpop3.deletemessage?rev=1542192349&do=diff VPOP3.DeleteMessage Lua function The Lua management function 'VPOP3.DeleteMessage' marks a specified message to be deleted, or removes the deleted flag. Messages marked to be deleted will not be deleted immediately, but only when that mailbox is 'purged' from an IMAP4 client. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:vpop3.getmessages?rev=1542192349&do=diff VPOP3.GetMessages Lua function The Lua management function 'VPOP3.GetMessages' retrieves a table containing all the mail messages in a specified folder. VPOP3.GetFolders(username, folder); * username is the username from VPOP3.GetUsers * folder is the folder from VPOP3.GetFolders It returns a table where the key is the message UID and the value is a table of: text/html 2021-08-09T10:58:46+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:vpop3.sendmessage?rev=1628506726&do=diff VPOP3.SendMessage The Lua function 'VPOP3.SendMessage' sends a text email message It takes four parameters: * The email address of the sender * The email address of the recipient * The subject line * The message body The function returns one value: