https://wiki.pscs.co.uk/ 2026-05-13T02:45:52+00:00 https://wiki.pscs.co.uk/ https://wiki.pscs.co.uk/_media/wiki:dokuwiki.svg text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:listserver_commands?rev=1542192349&do=diff ListServer Commands The ListServer is an automated process in VPOP3 which manages mailing lists. People can send commands to the ListServer to perform various functions remotely. Whether these commands are allowed, and exactly how they work depends on the particular mailing list's settings. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:lists?rev=1542192349&do=diff Lists The Lists section in VPOP3 lets you view and manage the various types of 'List' which VPOP3 supports * Distribution Lists * Mailing Lists * Forwardings * ODBC Mailing Lists * Groups Using a list A list will contain zero or more 'members' (usually email addresses) which can be messaged all at once. To send a message to all the members of a list, you will usually send an email to the listname at a valid domain. text/html 2025-05-08T08:23:35+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:lua_smtp_server_script?rev=1746692615&do=diff SMTP Server Lua Scripting The SMTP Server Lua Script is called SMTPSVR.LUA and can be edited from the Settings -> Scripts page in the VPOP3 settings. This script is called whenever an instance of the VPOP3 SMTP server is launched - ie whenever someone opens a connection to port 25 on the VPOP3 server to send it a message, whether from a local user or an incoming SMTP message. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:smtp_ids_ips?rev=1542192349&do=diff SMTP Server -> IDS/IPS The IDS/IPS tab lets you set logging and automatic blocking parameters for the IDS (Intrusion Detection System) and IPS (Intrusion Prevention System) component of the SMTP server. SMTP servers are regularly attacked, both by incoming mail attacks (spam/viruses etc) and relay attacks (by spammers and other malware distributors trying to send mail through them). Because of this, there is a system in VPOP3 which will track attack attempts on the SMTP service and can automat… text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:listserver_settings?rev=1542192349&do=diff ListServer Settings Settings -> ListServer Settings In VPOP3, the ListServer is an automated 'user' which handles mailing list requests, such as subscribe & unsubscribe commands. Anyone can send an email to the ListServer to subscribe to (public) mailing lists, or unsubscribe from mailing lists they are on, or see a list of public mailing lists etc. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:smtp_rule_example_-_restrict_who_can_send_to_a_local_email_address?rev=1542192349&do=diff SMTP Rule Example - restrict who can send to a local email address If you have a local email address (a user, group or distribution list) and you want to restrict which email addresses can send messages to this address, you can use SMTP rules. There are a few ways you can configure the SMTP rules for this scenario. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:security_intrusion_protection?rev=1542192349&do=diff Security Settings -> Intrusion Protection Tab Settings -> Security Settings -> Intrusion Protection Tab Starting in VPOP3 v6.0, VPOP3 can monitor failed logins for all accounts across all services and block an attacker's IP address from accessing VPOP3 for a specified time text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:your_connection_has_been_blocked_temporarily_-_try_again_later?rev=1542192349&do=diff Error message: Your connection has been blocked temporarily - Try again later If you get an error message in your email client software saying Your connection has been blocked temporarily - Try again later or Server access temporarily blocked! Please try again later text/html 2019-08-27T16:13:40+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:lua_monitor_script?rev=1566922420&do=diff Monitor Scripting (Added in V6.15) This script has three functions: * MonitorIncoming * MonitorInternal * MonitorOut The functions are similar, except they are called when different messages are to be monitored (incoming, internal and outgoing messages respectively). text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:mappings?rev=1542192349&do=diff Mappings In VPOP3, Mappings are a way of explicitly linking an email address to a user or list. They can also be used to indicate that an email address is remote, even though it would otherwise appear to be a local email address. In other email servers, a similar feature may be called 'aliases' text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:users?rev=1542192349&do=diff Users The Users page shows the list of users, as well as giving you some actions which you can perform use the user list. * Import users from file * Import users from Windows * Export users to file * Bulk Add Users * Edit User Welcome Message * Send Admin Message * Edit a User User List Outgoing Messages Just above the main user list is an entry Outgoing Message Queue. Clicking on this will let you see which messages are waiting to be sent out, and you can delete/ text/html 2026-04-06T17:59:47+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:mail_not_downloading_from_isp?rev=1775498387&do=diff Mail Not Downloading From ISP This normally happens because you have told VPOP3 to Leave Messages On Server (on the Mail Connectors -> Mail Collectors -> (name) -> POP3 General tab). If you do this, VPOP3 will leave messages on the ISP's mail server for several days, and remember that it has already downloaded them. Then, the next time it connects it will see that there are some messages waiting, but it may find that it has already downloaded them, so it won't download them again. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:address_book_tab?rev=1542192349&do=diff Address Book tab The Address Book tab within VPOP3 webmail enables you to manage your lists of contacts and add those contacts into a new or existing message. Substantial alterations to the interface were introduced in version 5. Both interfaces are documented. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:groups?rev=1542192349&do=diff Groups In VPOP3 a 'group' is mainly an administrative feature. If you only wish to have a list of email addresses to send messages to under one address, you should use the 'List' feature instead. The main function of Groups is to let you set certain user attributes for a whole group of users at once. text/html 2026-03-16T11:02:32+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:useful_database_queries?rev=1773658952&do=diff Useful Database Queries Below are some database (SQL) queries which may be useful in some situations. You can run these from the 'psql' program at the command prompt. Some can also be run from the Settings -> Database -> Query page in the VPOP3 settings. text/html 2026-03-16T16:00:10+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/wiki:syntax?rev=1773676810&do=diff Formatting Syntax DokuWiki supports some simple markup language, which tries to make the datafiles to be as readable as possible. This page contains all possible syntax you may use when editing the pages. Simply have a look at the source of this page by pressing text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:lan_forwarding_queue_status?rev=1542192349&do=diff LAN Forwarding Queue Status To view the LAN Forwarding Queue Status, go to Settings -> Local Mail -> LAN Forwarding -> Queue Status The LAN Forwarding Queue shows the messages which VPOP3 has currently got queued to be sent to another mail server on your network using SMTP. The LAN Forwarding Queue status page shows a simple list of the messages waiting to be sent. The four columns in the table show: text/html 2025-08-18T15:13:06+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:forward_messages_to_an_external_address?rev=1755529986&do=diff How to Forward Messages to an External Address There are two possible methods to forward messages to an external address: * Use this method if it is for a person who might want to receive their email whilst in the office and/or get the mail sent to an external address. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:sharing_folders?rev=1542192349&do=diff Sharing IMAP4 folders Some email clients will allow you to share IMAP4 folders from within the client itself (eg eM Client) or have plugins to allow this (eg Mozilla Thunderbird with the Imap-ACL extension). In that case, you will need to see the documentation for that to set up sharing. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:download_rules?rev=1542192349&do=diff Download Rules Download rules are a facility in VPOP3 where it can look at message summary information before downloading a message from an ISP POP3 mailbox (they do not work on incoming SMTP messages - use SMTP Rules for that) To edit download rules, go to text/html 2025-06-23T10:51:46+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:imap4_server_script?rev=1750675906&do=diff IMAP4 Server Scripting (Added in V6.12) DoCapability function When the IMAP4 CAPABILITY command is received, VPOP3 generates a capability string based on settings, then calls DoCapability(ipaddr, capabilities) * ipaddr = IP address of the client computer text/html 2023-08-16T07:48:01+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:lua_pop3_client_script?rev=1692172081&do=diff POP3 Client Lua Scripting The POP3 Client Lua Script is called POP3CLT.LUA and is edited in Settings -> Scripts. This script is called whenever VPOP3 runs a POP3 session to download messages from a remote POP3 server. VPOP3 will call the following Lua functions in the script at the following times: text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:message_monitoring?rev=1542192349&do=diff Message Monitoring Message monitoring in VPOP3 will tell VPOP3 to send a copy of all the outgoing, internal and/or incoming mail from/to specified users to be sent to another specified user. In the current versions of VPOP3, all monitored messages are sent to the same user (or list), you cannot specify different recipients for different monitored users. (This may be something that is added/enhanced in the future) text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:smtp_filtering?rev=1542192349&do=diff SMTP Service - Filtering The SMTP Server -> Filtering tab lets you set up filtering of messages going through the VPOP3 SMTP service. This may be incoming SMTP messages, or locally sent messages. SMTP Rules SMTP Rules let you create custom rules for processing messages as they go through the VPOP3 SMTP service. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:user_delivery_script?rev=1542192349&do=diff User Delivery Script (VPOP3 v6.5 or later) If there is a <username>/delivery.lua script, this Lua script can override VPOP3's message delivery options. You can edit this in the Settings -> Scripts page in the settings. This script affects how VPOP3 will handle how messages being delivered to this user are handled. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:user_permissions?rev=1542192349&do=diff Permissions This section lets you configure the permissions that a particular user has. Allowed Protocols The Allowed Protocols section lets you specify which services this user has access to. Note that these settings affect access to the whole service. If you want users to be able to access a service from some IP addresses, but not from others, then use the text/html 2019-11-13T15:35:55+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:1069_-_login_failure_-_error_when_starting_vpop3db_service?rev=1573659355&do=diff 1069 or 7000 Login Failure error when starting VPOP3DB service A 1069 or 7000 login failure error when starting the VPOP3DB service usually means that something is 'wrong' with the vpop3postgres account in Windows - the password may have expired, or someone may have reset the password. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:creating_extra_smtp_services?rev=1542192349&do=diff Creating Extra SMTP Services In VPOP3 Enterprise (not VPOP3 Basic) you can create multiple SMTP services. This can be useful if you want VPOP3 to listen on different ports and/or have different settings. There are two ways of doing this. Have a single SMTP service listening on multiple ports or IP addresses text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:french_webmail_language_file?rev=1542192349&do=diff French Webmail Language File Copy/paste the text below to a file 'french.lng' or 'francais.lng' in the VPOP3 directory. (French users, feel free to update/correct the text below) #login page logintitle=VPOP3 Login webadminlogin=web admin login webmaillogin=web mail login enterusername=You must specify your VPOP3 username here bookmarksnotsupported=I'm sorry, but your web browser does not support this function. You will have to add this page to your bookmarks manually. loginfailed=Login Faile… text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:obtaining_message_headers?rev=1542192349&do=diff How to Obtain Message Headers Most people are familiar with mail headers such as From:, To:, Subject: etc. but there are many more which most people never see. Quite often we need to see the full internet mail headers from an e-mail that is causing problems. This article explains how to get hold of them in some of the more common e-mail clients. text/html 2023-08-02T08:22:37+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:access_restrictions_internal_format?rev=1690964557&do=diff Access Restrictions Internal Format VPOP3 internally stores service IP Access Restrictions in its settings database using the following format to encode the multiple entries These are stored in the settings database as *ALLOWED*.DAT (using VPOP3SETTINGS GET *ALLOWED*.DAT will list them) text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:get_all_lists_members?rev=1542192349&do=diff Database query to get all lists and members At a command prompt in the VPOP3 directory run psql (The password is 'vpop3pass') Then, type \copy (select l.name, address from users.listmembers m inner join users.lists l on m.list=l.id) to 'c:/temp/x.csv' csv header; text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:list_messages_in_lan_forwrding_queue_waiting_to_go_to_a_specific_server?rev=1542192349&do=diff Database query to list messages in the LAN forwarding queue waiting to go to a specific server The VPOP3 settings show the first 100 messages in the LAN forwarding queue. Usually this is sufficient as the LAN forwarding queue is usually nearly empty, but in case of a problem it may be much bigger. The database queries below let you list just messages going to a specific server. text/html 2026-02-24T15:49:48+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:lua_smtp_mx_control?rev=1771948188&do=diff Lua SMTP MX Control Every time VPOP3 is going to send messages using direct MX sending, it runs a script called mxout.lua which can be created/edited in Settings -> Scripts (or in the VPOP3 directory in VPOP3 v6.6 or earlier). Global Variables Starting with v8.8, the following global variables are defined: text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:misc_dns?rev=1542192349&do=diff Misc -> DNS Tab Settings -> Misc Settings -> DNS The DNS tab lets you specify which DNS servers VPOP3 will use. DNS (Domain Name System) is a system which converts Internet host names (eg www.google.com) into a numeric IP address (eg 1.2.3.4), because all connections on the Internet are actually performed using numeric IP addresses, but it is easier for people to remember names. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:quarantine_viewer?rev=1542192349&do=diff Spamfilter Quarantine Viewer Settings -> Spamfilter -> Quarantine Viewer The Quarantine Viewer lets you see messages which have been quarantined by the VPOP3 Spam Filter. As an administrator you can see quarantined messages for any user, and release them if appropriate. If you release a message, it will be sent into the original recipient's Inbox, not into your Inbox. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:send_admin_message?rev=1542192349&do=diff Send Admin Message It is possible for administrator users to send a bulk email message to an entire group or list. To begin composing an email, go to the Administration Settings -> Users page, and click Send Admin Message. This should then open a window, which allows you to specify various options. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:spamrules_statement_getaddresstype?rev=1542192349&do=diff Spam Filter Rules: GetAddressType Statement GetAddressType Version 2.4.6+ Purpose Analyses a specified email address and reports what 'type' of address it is The GetAddressType statement requires an email address and variable name, in the format text/html 2026-02-19T17:56:27+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:temporary_files?rev=1771523787&do=diff Temporary Files This is for files in the VPOP3\_temp folder Most of the filename is the hexadecimal timestamp (in Windows 'FILETIME'/65536 form) with a 4 digit hex sequential number afterwards. The first letter or two (usually G-Z) can tell something about what caused the file. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:user_message_rules?rev=1542192349&do=diff Message Rules The Edit User -> Message Rules tab can be used to create/edit rules which are processed when messages arrive in a User's mailbox. They can be used to copy messages, mark them as read, delete them, etc VPOP3 will process Message Rules in the order they appear in the list. If you want to change the order of the rules, you can drag & drop them into the correct order. Usually when VPOP3 has processed a rule, it will go on to check further rules, but you can use the text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/adminapi:smtpclientblockadd?rev=1542192349&do=diff SMTPClientBlockAdd Action (VPOP3 Enterprise Only) This adds an entry to the SMTP Client Block list. The data specified is: * IPAddress - the IP address to add. This can be an individual IP address or a CIDR address (IPv4 and IPv6 addresses are allowed) text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/adminapi:userruleconditions?rev=1542192349&do=diff UserRuleConditions Replacement Use: ~userruleconditions~ <format string> ~end~ Required parameter: Account, RuleId This returns the message rule conditions for the specified rule The format string can have the replacements * id - numeric ID of the condition text/html 2025-10-14T15:43:01+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/faq:gdpr_hosted_vpop3?rev=1760456581&do=diff GDPR for hosted VPOP3 service (Since Brexit, the UK has “UK GDPR” instead of “EU GDPR”, so this document refers to UK GDPR) Also see GDPR for VPOP3 as most of that applies to the VPOP3 hosting service as well. This Data Processing Agreement is part of our hosted VPOP3 service terms. You can view the revision history by clicking on the 'clock' icon to the right. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:allow_remote_access_to_vpop3_mailboxes?rev=1542192349&do=diff Allow Remote Access to VPOP3 Mailboxes Sometimes people want to be able to access their office VPOP3 mail server from a remote site or mobile phone etc. These instructions assume you have a permanent Internet connection (eg ADSL, Cable etc). If you don't have a permanent Internet connection, see text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:automatically_forwarding_spam_to_the_pscs_spamtraps?rev=1542192349&do=diff How to automatically forward spam to the PSCS spamtrap Spam filter companies use “spamtraps” to catch samples of spam for analysis so filters can be updated. We do this here as well. Most types of spam are already caught by our spam traps, however sometimes people get lots of spam which gets through the filter because their particular type of spam does not currently get sent to our spam traps. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:configure_a_router_to_allow_incoming_smtp?rev=1542192349&do=diff Accepting Incoming SMTP through a router If your ISP is providing you with an SMTP mail feed (incoming SMTP) and you have VPOP3 connecting to the ISP through a router then you will probably need to modify the router configuration to allow this. Most routers' default configuration will only allow outbound connections (ie connections from the local network out to the Internet). If you need to accept incoming SMTP mail, then you need to tell the router to allow inbound connections on port 25 for … text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:emptying_a_user_s_mailbox?rev=1542192349&do=diff Emptying a user's mailbox To empty a user's 'Inbox' folder, go to the VPOP3 settings. Then click on the Users tab at the top to go to the user list. In the user's list there will be a column displaying the number of messages in the user's Inbox folder. Just to the right of that will be an icon of a waste bin. If you click on that, you will delete all the messages in the user's Inbox folder. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:german_webmail_language_file?rev=1542192349&do=diff German Webmail Language Page Copy/paste the text below to a file 'german.lng' in the VPOP3 directory. (German users, feel free to update/correct the text below) #login page logintitle=VPOP3 Login webadminlogin=web admin login webmaillogin=Webmail Anmeldung enterusername=Sie m&uuml;ssen einen Benutzernamen angeben bookmarksnotsupported=I'm sorry, but your web browser does not support this function. You will have to add this page to your bookmarks manually. loginfailed=Anmeldung fehlgeschlagen … text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:ghost_folders?rev=1542192349&do=diff IMAP4 'Ghost Folders' Sometimes your IMAP4 email client may show folders in the folder tree, but when you select them, you get an error that the folder does not exist. This happens because IMAP4 has the concept of being able to 'subscribe' to folders - this means that you can hide folders by unsubscribing from them. text/html 2026-03-18T20:20:50+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:how_to?rev=1773865250&do=diff "How To" Articles Installation/Upgrades * Download VPOP3 * Install VPOP3 * Move VPOP3 * Upgrade VPOP3 * Upgrade VPOP3 to version 5.x or 6.x from version 4 or earlier * Upgrade VPOP3 to version 7.x from version 6 or earlier * Upgrade VPOP3 to version 8.x from version 7 or earlier * Upgrade VPOP3 to version 9 or later from version 7 or 8 * Performance Requirements * Installation Checklist General Configuration * Initial Configuration * Users * Add an Alias * Create… text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:outlook_outlook_express_are_sending_mail_repeatedly?rev=1542192349&do=diff Outlook / Outlook Express is sending mail repeatedly If you are using Outlook or Outlook Express you may occasionally find that mail is being sent repeatedly. There are a couple of possible reasons for this which we know of Sending taking too long text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:pop3_client_problem?rev=1542192349&do=diff VPOP3 - POP3 Client Problem These errors occur whilst VPOP3 is communicating with your ISP's POP3 mail server to retrieve your mail. The server connection was closed unexpectedly If the message text is Error with Pop3 Client (XXXX (YY)) The server connection was closed unexpectedly text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:remove_messages_from_the_outbound_queue?rev=1542192349&do=diff How to remove messages from the outbound queue To delete messages from the VPOP3 'OutQueue': * log into the VPOP3 settings * go to the Users page * click on the OutQueue entry in the accounts list. This will show you a list of all the messages waiting to be sent by VPOP3 text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:remove_user_from_everyone_list?rev=1542192349&do=diff How to Remove a User from the Everyone List * Edit the user * Go to the Permissions tab * Uncheck the Put user in Everyone list option * Press Submit text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:use_the_vpop3_status_monitor?rev=1542192349&do=diff How to use the VPOP3 Status Monitor The VPOP3 Status Monitor is a small program which displays a postbox icon (usually red) in the Windows notification area (usually at the bottom right of the screen - by the clock). This icon can be used for quick access to various VPOP3 facilities. Note that the Status Monitor is text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:vpop3_is_using_a_lot_of_disk_space?rev=1542192349&do=diff VPOP3 is using a lot of disk space If VPOP3 is using a lot of disk space, the problem is usually that there is lots of data there, so it has to use the disk space. Message Storage In VPOP3 version 5 and later, all users' messages are stored in the database, so they will occupy space in the VPOP3\pgsql\data folder. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:vpop3_not_starting_properly?rev=1542192349&do=diff VPOP3 Not Starting Properly If VPOP3 is not starting properly, then the first thing to check is whether the database server is starting. In VPOP3 v3 and later, VPOP3 uses a PostgreSQL Database server for data storage, so if the database server is not running, VPOP3 will not be able to start properly. In this case, the VPOP3.EXE process may appear in Task Manager, but it won't respond to anything, or it may appear in Task Manager and then stop after a short period. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:vpop3_sending_high_volumes_of_unrecognised_mails?rev=1542192349&do=diff SMTP Relay Protection in VPOP3 SMTP Relay Protection should be used on ALL SMTP mail servers (such as VPOP3) which have a permanent connection to the Internet. You may also want to use it on servers which are only connected occasionally via a dial-up connection. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:whitelist_blacklist?rev=1542192349&do=diff Spamfilter Whitelist & Blacklist The VPOP3 spamfilter has a whitelist and a blacklist for sender addresses. It also has a whitelist and blacklist for words/phrases. You can view these lists in the VPOP3 settings by going to Settings -> Spamfilter -> text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/mailapi:userruleconditions?rev=1542192349&do=diff UserRuleConditions Replacement Use: ~userruleconditions~ <format string> ~end~ Required parameter: RuleId This returns the message rule conditions for the specified rule The format string can have the replacements * id - numeric ID of the condition * field - field/data to test text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:archive_search_results?rev=1542192349&do=diff Message Archive -> Results Tab Settings -> Message Archive -> Results tab The Results tab only exists if you have previously done a search operation and are viewing the results of that search. The Results page shows you a list of the messages (up to 1000 entries are available) returned by the search. You can select multiple entries by using shift+click or ctrl+click text/html 2023-11-12T09:51:40+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:dmarc_reporter_script?rev=1699782700&do=diff DMARC Reporter Script (from VPOP3 v8.6 onwards) This script lets you customise how VPOP3 sends DMARC reports to the sending domain. This can be useful in case the sending domain's DMARC configuration is incorrect as that can cause errors sending the reports or cause messages to be 'stuck' in VPOP3's Outqueue. These problems won't cause any lasting damage, but may be inconvenient or annoying, so you can alter the behaviour using Lua scripting text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:import_users_from_file?rev=1542192349&do=diff Import Users From File VPOP3 supports the importation and exportation of users, via a CSV file (see for a specification of the CSV file format). NOTE: This process is not designed to provide a complete backup of user data, nor is it intended to facilitate moving VPOP3 to a new computer. Instead, see the following relevant pages: text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:list_all_messages_in_lan_forwrding_queue?rev=1542192349&do=diff Database query to list ALL messages in the LAN forwarding queue The VPOP3 settings show the first 100 messages in the LAN forwarding queue. Usually this is sufficient as the LAN forwarding queue is usually nearly empty, but in case of a problem it may be much bigger. The database queries below may help in that situation. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:list_failed_message_send_summary?rev=1542192349&do=diff Database query to list failed message sends This will list failed outgoing messages from the last 3 days (with the default VPOP3 settings) At a command prompt in the VPOP3 directory run psql (The password is 'vpop3pass') Then, type select created,returnpath,subject,username || '@' || domain as recipient, latesterror from outqueue.outrecipients inner join outqueue.outmessages using(msgid) where failedtime is not null order by created desc; text/html 2025-08-14T09:24:55+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:lua_smtp_relay_control?rev=1755163495&do=diff Lua SMTP Relay Control Every time VPOP3 is going to send messages via SMTP Relay, it runs a script called relayout.lua in the VPOP3 directory. Global Variables This script may have global variables, depending on your version of VPOP3. In VPOP3 3.0.0L and later, there are two read-only global variables set at the start of the script: text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:message_headers?rev=1542192349&do=diff Message Headers This article describes some of the headers which VPOP3 can add to messages. Note that some of these may be added by customisable scripts used by VPOP3, so may not match exactly, but the descriptions below are for the defaults distributed with VPOP3. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:misc_advanced?rev=1542192349&do=diff Misc -> Advanced Tab Settings -> Misc Settings -> Advanced You will normally not need to change any settings on this page unless VPOP3 technical support have suggested it. If you do make changes, and want to go back to the original settings, the Restore Defaults button will restore the settings to their defaults. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:misc_external_fax?rev=1542192349&do=diff Misc -> External Fax Tab Settings -> Misc Settings -> External Fax The External Fax tab is for use with some external fax server applications which work by collecting mail from a POP3 mailbox. If a Fax Server Mailbox is selected, then VPOP3 will automatically send any locally sent mail to that mailbox if the recipient is local, but doesn't match another local address (a user, list, mapping etc), text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:pop3_collection?rev=1542192349&do=diff POP3 Mail Collection POP3 Mail Collection is when VPOP3 will collect mail from an external POP3 mailbox - for instance, from an Internet Provider. POP3 General This page tells VPOP3 how to collect mail. * POP3 Server Address - this is the name (or IP address) of the POP3 server from which you want VPOP3 to collect mail text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:route_by_parsing_message_headers?rev=1542192349&do=diff Route incoming POP3 mail by parsing message headers This routing method is generally used if you have a catch-all or 'multi-catch' mailbox with your Internet provider. With this method, VPOP3 will look at the To/Cc and other fields in the message headers to try to work out who the message is for. If the recipient is not listed in the headers (eg for BCCd mail) it may not be able to automatically detect who the message is for. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:sender_advanced_settings?rev=1542192349&do=diff Mail Sender Advanced Settings Mail Connectors -> Mail Senders -> (name) -> Advanced Advanced Domain Filtering For VPOP3 v6.11 and later, see the Domain Filtering section of the user manual. The Domain Filtering box lets you restrict which email messages are sent via this Mail Sender. You specify each rule on a separate line, and the message will be sent if it matches any sender rule text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:spamrules_statement_zipcontents?rev=1542192349&do=diff Spam Filter Rules: ZipContents Statement ZipContents Version 6.7+ Purpose Enables the script to obtain the list of files contained in a ZIP attachment The ZipContents statement requires a message section number and bag name, in the format ZipContent <message section number> <bag name> text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:spamrules_statement_zipcontentsfull?rev=1542192349&do=diff Spam Filter Rules: ZipContentsFull Statement ZipContentsFull Version 6.7+ Purpose Enables the script to obtain the list of files contained in a ZIP attachment The ZipContentsFull statement requires a message section number and bag name, in the format text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:status?rev=1542192349&do=diff Status The VPOP3 Status screen has two tabs * Server Status * Sessions Server Status The Server Status tab is essentially a copy of the VPOP3 Status Monitor information. * Connection Status - this shows the 'online' status of VPOP3. If it says idle, it does not mean VPOP3 is not working, or not doing anything, it just means that it is not currently sending or collecting mail from the Internet. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:user_autoresponder?rev=1542192349&do=diff Autoresponder An autoresponder is a way of automatically replying to messages as they arrive in a user's mailbox. In VPOP3, an incoming message must arrive in a user's mailbox for the autoresponder to trigger. If you use forwards, assistants, mappings, etc to divert a message before it arrives in the mailbox, the autoresponder will never trigger. If you want to use an autoresponder, but not keep the original message, then make sure the message arrives in the mailbox (eg by using an 'Assistant'… text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:webmail_menu?rev=1542192349&do=diff Webmail Menu bar The Webmail Menu bar within VPOP3 webmail enables you to quickly perform relevant actions. The Menu has six main headings; of which, three have multiple options. Option Active Function V Notes Message Mail and View Message tabs Opens/closes Message menu text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:whats_new_in_version_5_webmail?rev=1542192349&do=diff What's new in version 5 webmail? This is a list of some of the most noticeable changes to VPOP3's webmail interface for version 5. For a more detailed list of changes, view our bugtracker. [VPOP3 Version 5 - mobile compatible webmail] Mobile compatible webmail If you access version 5 webmail from a mobile device, you will probably be redirected to the mobile compatible version. It is a cut-down version of Webmail, which retains the key features, but doesn't utilise the extra features which w… text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:white_black_lists?rev=1542192349&do=diff Spamfilter White/Blacklists This lets you set whitelists & blacklists for the spam filter. There are four lists you can manage. The Whitelist Addresses & Blacklist Addresses lists let you specify sender email addresses to check. With the default rule weights, if a sender's address is on the Whitelist, it will be allowed through the spam filter, and if it is on the Blacklist it will be blocked. If an address is on both the Whitelist and the Blacklist, they will cancel each other out, and the me… text/html 2022-10-01T11:32:39+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/wiki:dokuwiki?rev=1664623959&do=diff DokuWiki wiki:dokuwiki DokuWiki is a simple to use and highly versatile Open Source wiki software that doesn't require a database. It is loved by users for its clean and readable syntax. The ease of maintenance, backup and integration makes it an administrator's favorite. Built in text/html 2022-10-01T11:36:44+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/start?rev=1664624204&do=diff VPOP3 Wiki Welcome to the VPOP3 Wiki. Here you will find VPOP3 documentation, FAQs and “How To” articles * FAQs * How Tos / Troubleshooting * Reference * Tips & Tricks If you want to add information, hints & tips, etc, you can register on this Wiki and modify or create new pages. Please don't ask questions on the Wiki; if you have a question, ask it on text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/adminapi:smtpclientallowadd?rev=1542192349&do=diff SMTPClientAllowAdd Action (VPOP3 Enterprise Only) This adds an entry to the SMTP Client Allow list. The data specified is: * IPAddress - the IP address to add. This can be an individual IP address or a CIDR address (IPv4 and IPv6 addresses are allowed) text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/adminapi:smtpclientallowremove?rev=1542192349&do=diff SMTPClientAllowRemove Action (VPOP3 Enterprise Only) This removes an entry to the SMTP Client Allow list. The data specified is: * IPAddress - the IP address to add. This can be an individual IP address or a CIDR address (IPv4 and IPv6 addresses are allowed) text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/adminapi:smtpclientblockremove?rev=1542192349&do=diff SMTPClientBlockRemove Action (VPOP3 Enterprise Only) This removes an entry to the SMTP Client Block list. The data specified is: * IPAddress - the IP address to add. This can be an individual IP address or a CIDR address (IPv4 and IPv6 addresses are allowed) text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/adminapi:smtpspfwhitelist?rev=1542192349&do=diff SMTPSPFWhitelist Replacement Use: ~smtpspfwhitelist~ <format string> ~end~ If you specify the parameter serverid then this will just return white list entries which match all servers or this server. The format string can have the replacements * id - the whitelist entry ID text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/adminapi:userrulelist?rev=1542192349&do=diff UserRuleList Replacement Use: ~userrulelist~ <format string> ~end~ Required parameter: Account This returns the message rule list (in order) for the specified user The format string can have the replacements * id - numeric ID of the rule * order - numeric order number (1-n) of the rule text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/adminapi:version_5_webadmin_api?rev=1542192349&do=diff Version 5 Web Admin API This section is only relevant for people who may want to access the Administration features from their own scripts, or want to customise the standard administration pages. Note that no free support is available for this. This is not a full list of features, but it will be updated from time to time. text/html 2018-12-05T15:24:44+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/faq:how_can_i_place_an_order?rev=1544023484&do=diff How can I place an order Online The easiest way to place an order is online. Click on the Purchase item in our website navigation bar, and select the appropriate product. You will be presented with a price list. Choose the required item and click the text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/faq:pop3?rev=1542192349&do=diff POP3 Protocol POP3 is the most basic email protocol for collecting mail which is in common use. Almost all email client programs (such as Microsoft Outlook & Outlook Express, Mozilla Thunderbird, etc) can collect mail using POP3. With POP3, mail is usually downloaded by the email client and stored on the user's local PC. It is then deleted from the mail server, so the only copy is on the user's PC. Any mail folders etc are all managed on the user's PC. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/faq:what_are_the_limitations_of_the_home_user_licence?rev=1542192349&do=diff What are the limitations of the Home User licence The VPOP3 Home User licence allows you to have up to 5 users for a lower price than the standard 5 user licence, but there are some restrictions in functionality. These are described below: * There is no Mailing List Server (you can still have distribution lists) text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/faq:what_is_the_difference_between_vpop3_standard_and_vpop3_enterprise?rev=1542192349&do=diff What is the difference between VPOP3 Basic and VPOP3 Enterprise? VPOP3 Enterprise includes all the features of VPOP3 Basic, plus: * IMAP4 mail support as well as POP3, SMTP and Webmail * Support for database (ODBC) links for the Global Address Book and Mailing Lists. * Shared calendars & webmail address books text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:10503?rev=1542192349&do=diff Socket Error 10503 - No More Data Error 10503 means that the connection between VPOP3 and a remote computer (normally your ISP) was dropped at an unexpected time. This is different from the error 10054 in that this is a controlled line drop. One way this can happen is if the ISP's POP3 server uses an obsolete standard which allows it to drop the connection if a POP3 'LIST' command is performed on an empty mailbox. The current standard requires that the connection is not dropped until the clien… text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:add_a_user?rev=1542192349&do=diff Add a user To add a user account in VPOP3 is very simple. * Go into the VPOP3 settings * Press the Users button at the top of the page to view the user list * Press the New button to create a new user * Enter the user account name and password, and press text/html 2022-01-26T10:47:35+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:calendar_in_mozilla_lightning?rev=1643194055&do=diff Calendars in Mozilla Thunderbird The Thunderbird email client supports CalDAV calendars as standard. This can be used to access VPOP3's CalDAV server. To add a VPOP3 CalDAV calendar to Mozilla Thunderbirdis straightforward * Add the calendar to Thunderbird text/html 2026-03-23T10:18:43+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:create_an_ssl_certificate?rev=1774261123&do=diff How to create an SSL Certificate VPOP3 Enterprise supports SSL certificates for encrypted sessions. The basic mechanism to create an SSL certificate is that you have to generate a CSR (Certificate Signing Request) then send that to a CA (Certificate Authority) who will sign your certificate and give you the certificate back. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:daily_summary_does_not_show_all_sent_messages?rev=1542192349&do=diff Daily Summary is not reporting all Sent messages For VPOP3 to log outbound messages it needs to be able to work out that the message is FROM: a user whose mail is handled by the local VPOP3. To do this it has to examine the FROM: address in the message header. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:error_expanding_recipient_-_nesting_level_too_deep?rev=1542192349&do=diff Error expanding recipient - Nesting Level too deep You receive an error message saying: Error expanding recipient "<email address>" Nesting Level too deep (51) Check the configuration for loops (Note the '51' number may be slightly different - that's the nesting level - anything over 50 is detected as an error) text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:inbox_size_is_zero_but_mailbox_size_is_not_zero?rev=1542192349&do=diff Inbox size is zero but mailbox size is not zero In the VPOP3 settings sometimes, on the user account list the “Inbox Count” is shown as zero, but the “Mailbox Size” is not zero. This is not a bug, or mistake - the two figures are showing different things. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:installation_checklist?rev=1542192349&do=diff Installation checklist This list contains some things you may want to check before or after installing VPOP3 to make sure it's not going to encounter any common issues. Before installation * Make sure that VPOP3 is not installed on a RAID 5 or RAID 6 array. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:iphone?rev=1542192349&do=diff Setting up an iPhone/iPad/iPod Touch To set up an iPhone to access VPOP3's mail, you first of all need to configure VPOP3 to allow access by remote users (unless you will only be using the iPhone in the office, connected via WiFi to the office LAN). Adding the mail account to your iPhone/iPad text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:locked_accounts?rev=1542192349&do=diff Locked Accounts VPOP3 has a security feature which will lock out an account after it has had several failed login attempts. This feature is to make it harder for an attacker to use a brute force or dictionary password attack on an account. The default settings are that after more than 3 attempts to log into an account with an incorrect password, VPOP3 will lock the account for 30 minutes. You can change these settings on the text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:many_instances_of_postgres.exe_running?rev=1542192349&do=diff Many instances of Postgres.exe are running If you are running VPOP3 3.0 or later, and look in the 'Processes' list in Windows TaskManager you will probably see multiple instances of postgres.exe running. This is perfectly normal, and does not indicate a problem. The PostgreSQL database works by having a separate instance of postgres.exe for each connection to the database (as well as a few extra for management and house keeping). This behaviour is documented on the text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:moving_messages?rev=1542192349&do=diff How to move messages between users There are several ways to do this, depending on your exact needs Via Administrator Console You can view a user's 'Inbox' messages by clicking on the message count on the Users list, then select the messages, choose the target user, and press the text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:mozilla_thunderbird?rev=1542192349&do=diff How to configure Mozilla Thunderbird This article won't show you all the possible settings in Thunderbird, because there are so many. Thunderbird is one of the most powerful & flexible email clients available at the time of writing, especially if you use IMAP4 (with VPOP3 Enterprise). text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:quarantine?rev=1542192349&do=diff Spam Quarantine By default, when the VPOP3 spam filter detects a message as being spam, it will go to the user's quarantine. Users can release messages from the quarantine by going to their webmail page and selecting the message from the quarantine list there. text/html 2025-09-11T13:48:07+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:recovering_messages_from_corrupted_database_into_fresh_database?rev=1757598487&do=diff Recovering messages from corrupted database into fresh database If the VPOP3 message database is corrupted, then one option is to build a fresh database and restore the settings into it, then recover the messages from the old database using the 'Message Restore' function in VPOP3. This has minimal downtime, but old messages will not all be available until the restore has completed. New messages will be available quickly, and you will be able to send messages. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:set_as_administrator?rev=1542192349&do=diff How to Set a User as Administrator VPOP3 has two 'types' of administrator. * Users who can administer VPOP3, and log in and change settings etc. These are normal users, but have the Administrator box checked on the User -> General settings for that user. These user have a red key icon in the users list. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:setup_steps_for_multiple_pop3_accounts_at_the_isp?rev=1542192349&do=diff Setup steps for multiple POP3 accounts at the ISP * Set up all the local users you need in the 'Users' page in the VPOP3 settings. The usernames & passwords do not have to have any relation to the ISP's accounts. These are the details which the users will put in their email clients (eg Outlook) to collect their mail from VPOP3. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:status_service_disabled?rev=1542192349&do=diff VPOP3 Status Service Disabled In some versions of VPOP3, occasionally the Status Service may get disabled if there was a problem during initialisation - this will prevent the VPOP3 Status Monitor from connecting to VPOP3. To check this, run RegEdit, and find text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:training_the_spam_filter?rev=1542192349&do=diff Training the VPOP3 Spam Filter The VPOP3 spam filter has a couple of mechanisms which can be used to 'train' it to distinguish between spam and not-spam. Bayesian Filter The Bayesian filter this looks at words in messages sent and received and their probabilities of being contained in spam and not-spam, and works out an overall probability of the message being spam or not-spam based on the combination of those probabilities. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:undelete?rev=1542192349&do=diff Undelete Messages in VPOP3 Enterprise v5 or later If a user accidentally deletes messages or a message folder, you can easily undelete this within a few days. The amount of time that messages are stored in the VPOP3 'recycle bin' is set in Settings text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:users?rev=1542192349&do=diff User Administration * Add a User * Delete a User * Changing a user's password * Remove user from Everyone List * Configure Email Signatures text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:using_a_mobile_phone_with_vpop3?rev=1542192349&do=diff Using a Mobile Phone with VPOP3 Many people want to use a mobile phone to send/receive their email nowadays. This is usually easy to do with VPOP3. The recommended way is to have the phone connect directly to VPOP3 for sending/receiving email. To do this, you need to do three things: text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:vpop3_alert_-_non-existent_user?rev=1542192349&do=diff Error message: VPOP3 Alert - Non-existent user - <username> If you receive an error message like: Subject: VPOP3 Alert - Non-existent user - <username> Delivery Failure Report. There was incoming mail for non-existent user "<username>". This means that VPOP3 downloaded a message using POP3 and it was addressed to an email address which does not exist. text/html 2026-01-05T09:31:47+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:vpop3_re-downloading_old_messages_from_isp_pop3_server?rev=1767605507&do=diff VPOP3 re-downloading old messages from the ISP POP3 server If you tell VPOP3's POP3 mail collector to leave messages on the ISP's server for a few days, you may find that sometimes VPOP3 will redownload all the messages from the ISP mailbox again. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:vpop3_status_monitor_problems?rev=1542192349&do=diff VPOP3 Status Monitor Problems The VPOP3 Status Monitor is the program which shows the little (usually red) postbox icon in the Windows task tray. This usually launches automatically from the Windows startup group. This program is VPOP3Status.EXE on the disk, or can be run manually from text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:vpop3db_service_doesn_t_exist?rev=1542192349&do=diff VPOP3DB Service doesn't exist If VPOP3 v3 or later won't start, and you find that the VPOP3DB (or PostgreSQL-VPOP3) service does not exist in the Windows Services list, it may be that you have just moved VPOP3 and made a mistake following the move procedure or something has removed the service for some reason. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/mailapi:autoresponderinfo?rev=1542192349&do=diff AutoresponderInfo Replacement Use: ~autoresponderinfo~ Required parameter: responderid - the ID of the autoresponder This returns a JSON structure containing the details of the specified autoresponder. The return structure is an object containing: text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/mailapi:userrulelist?rev=1542192349&do=diff UserRuleList Replacement Use: ~userrulelist~ <format string> ~end~ Required parameter: None This returns the message rule list (in order) for the current user The format string can have the replacements * id - numeric ID of the rule * order - numeric order number (1-n) of the rule text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/mailapi:version_5_webmail_api?rev=1542192349&do=diff Version 5 Web Mail API This section is only relevant for people who may want to access the WebMail features from their own scripts, or want to customise the standard Webmail pages. Note that no free support is available for this. This is not a full list of features, but it will be updated from time to time. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:calendar_calendars?rev=1542192349&do=diff Calendar.Calendars table The Calendar.Calendars table contains a list of all 'calendars' created in VPOP3. Each user account has at least one calendar Columns * calid - this is a integer sequential value which identifies the calendar uniquely in the database * text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:copy_smtp_rules?rev=1542192349&do=diff Copy SMTP Rules - Database Query This is an advanced Database action. There is no simple query that will perform the required operation, so we have to create a custom PostgreSQL function to copy the data. At a command prompt in the VPOP3 directory run text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:delete_list_member_from_all_lists?rev=1542192349&do=diff Delete list member from all lists You can delete an email address from all VPOP3 distribution & mailing lists. Go to Settings → Database → Query Alternatively, at a command prompt in the VPOP3 directory run psql (The password is 'vpop3pass') text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:edit_a_user?rev=1542192349&do=diff Edit a user To edit a user, go to the Users list in the VPOP3 settings and double-click on the username. * General * Passwords * Routing * WebMail Settings * Autoresponder * Message Rules * Permissions * Quotas * Aliases * Address Book * Signature * Advanced * Media * Finger Info text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:local_mail_general?rev=1542192349&do=diff Settings -> Local Mail -> General The Local Mail -> General page allows you to configure a few simple, but fundamentally important settings. Default Domain In the majority† of cases, this is the domain name that VPOP3 will use when sending automated messages; for instance, users may receive a message from text/html 2024-03-21T10:49:54+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:outgoing_message_script?rev=1711018194&do=diff Outgoing Message Scripting Every time VPOP3 adds a message to the Outgoing mail queue, it runs a script called outmessage.lua. Scripts are stored as files in the VPOP3 directory in VPOP3 v6.6 and earlier, or managed through the Settings -> Scripts page in VPOP3 v6.7 and later. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:smtp_advanced?rev=1542192349&do=diff SMTP Service -> Advanced Tab Services -> SMTP Server -> Advanced Tab Refuse SMTP Connections from This setting should be rarely needed, and should be normally left blank. It is here for historic purposes. If you put some text in this box, then VPOP3 will refuse any SMTP connections from clients whose 'HELO'/'EHLO' command data contains the text specified here as a substring. Eg, if this setting is set to '.myisp.com', then VPOP3 would refuse SMTP connections from any client which sends the c… text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:smtpstats_smtpclientfailures?rev=1542192349&do=diff SMTPStats.SMTPClientFailures table The SMTPStats.SMTPClientFailures table contains logging data about errors/usage for the SMTP Services in VPOP3. These are used for the Intrusion Protection facility & logging. Columns * id - sequential ID for the event * ipaddress - the SMTP client's IP address text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:spamrules_rule_names_and_weights?rev=1542192349&do=diff Spam Filter Rules: Rule names and weights The script can designate names to refer to certain rules. This name is created using a DefineRule statement. If you the follow a statement by a word in square brackets, when that statement is actioned, VPOP3 will add the specified word to a list of 'matched conditions' which can be used in reporting. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:spamrules_statement_dns?rev=1542192349&do=diff Spam Filter Rules: DNS Statement DNS Version 2.1.11+ Purpose Allows the script to perform an arbitrary DNS lookup, returning the result into a specified variable The DNS statement requires a type, hostname and variable name, in the format DNS <type> <hostname> <variable name> text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:spamrules_statement_foreach?rev=1542192349&do=diff Spam Filter Rules: ForEach Statement ForEach Version 2.1.7+ Purpose Causes a loop to be run through for all values within specified criteria The ForEach statement requires either two or three parameters (depending on the type of loop that is being conducted), in the format text/html 2023-08-14T16:01:01+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:spamrules_variables?rev=1692028861&do=diff Spam Filter Rules: Variables The VPOP3 spam filter script language supports simple variables. In most places these are specified as ${<variable name>}, but in some places they are just specified as <variable name> - for instance where a statement always puts its result into a variable. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:virus_scan_filter_script?rev=1542192349&do=diff Virus Scan Filter Scripting (Added in V6.17) The VIRUSSCAN.LUA script has a single function FilterResult This function is called for every virus that a VPOP3-integrated (eg VPOP3 AV or Sophos SAV Interface) detects. The function has the opportunity to 'filter' the virus detection so that VPOP3 will act as if the virus was not detected. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:vpop3.getmessages?rev=1542192349&do=diff VPOP3.GetMessages Lua function The Lua management function 'VPOP3.GetMessages' retrieves a table containing all the mail messages in a specified folder. VPOP3.GetFolders(username, folder); * username is the username from VPOP3.GetUsers * folder is the folder from VPOP3.GetFolders It returns a table where the key is the message UID and the value is a table of: text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/what_is:imap4?rev=1542192349&do=diff What is IMAP4 IMAP4 (Internet Mail Access Protocol V4) is a new mail retrieval protocol which can be used as an alternative to the POP3 (Post Office Protocol V3). The main difference between IMAP4 and POP3 is that with POP3 the messages are only stored temporarily on the mail server until they are downloaded to the email client where the messages are stored, manipulated, searched etc. With IMAP4 the messages are stored permanently on the server, and they are manipulated, searched etc on the ma…