https://wiki.pscs.co.uk/ 2026-05-06T06:55:44+00:00 https://wiki.pscs.co.uk/ https://wiki.pscs.co.uk/_media/wiki:dokuwiki.svg text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/faq:lost_licence_details?rev=1542192349&do=diff Lost Licence Details If you have lost your VPOP3 licence key, we will be able to find it for you, but we do have to make a nominal charge of £5.00 (+ VAT if applicable) to search for it as it is a time consuming task. If you need us to do this search, then email sales@pscs.co.uk. text/html 2025-10-14T15:43:01+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/faq:gdpr_hosted_vpop3?rev=1760456581&do=diff GDPR for hosted VPOP3 service (Since Brexit, the UK has “UK GDPR” instead of “EU GDPR”, so this document refers to UK GDPR) Also see GDPR for VPOP3 as most of that applies to the VPOP3 hosting service as well. This Data Processing Agreement is part of our hosted VPOP3 service terms. You can view the revision history by clicking on the 'clock' icon to the right. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:iphone?rev=1542192349&do=diff Setting up an iPhone/iPad/iPod Touch To set up an iPhone to access VPOP3's mail, you first of all need to configure VPOP3 to allow access by remote users (unless you will only be using the iPhone in the office, connected via WiFi to the office LAN). Adding the mail account to your iPhone/iPad text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:about?rev=1542192349&do=diff About The VPOP3 'About' page lets you see the version and build number of your VPOP3 installation, along with any licence details, and supplier details (if any) Licence Information The Licence Information section shows your current licence information text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:address_book_tab?rev=1542192349&do=diff Address Book tab The Address Book tab within VPOP3 webmail enables you to manage your lists of contacts and add those contacts into a new or existing message. Substantial alterations to the interface were introduced in version 5. Both interfaces are documented. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/faq:gdpr_for_vpop3?rev=1542192349&do=diff GDPR for VPOP3 self-hosted software VPOP3 is an email server program, it is not a service, so if you use VPOP3 on your own computer we are not a “data controller” or a “data processor” under GDPR rules as we never see any of your data (unless you give us permission to remotely connect to your PC for technical support purposes). text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:ical_on_mac_osx?rev=1542192349&do=diff Configuring iCal on Mac OSX to connect to VPOP3's CalDAV service This requires VPOP3 v6 or later. The following instructions are for Mac OS X v10.7.5 but should work with similar versions. We have not been able to create an account by going to System Preferences text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/mailapi:autoresponderlist?rev=1542192349&do=diff AutoresponderList and AutoresponderGlobalList Replacements Use: ~autoresponderlist~ or ~autorespondergloballist~ Required parameter: None This returns a JSON structure listing all the autoresponder details available. autoresponderlist returns the personal autoresponder details. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:spamrules_statement_foreach?rev=1542192349&do=diff Spam Filter Rules: ForEach Statement ForEach Version 2.1.7+ Purpose Causes a loop to be run through for all values within specified criteria The ForEach statement requires either two or three parameters (depending on the type of loop that is being conducted), in the format text/html 2026-03-18T20:51:33+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/faq:faq?rev=1773867093&do=diff Frequently Asked Questions Pre-Sales Questions * What is the difference between VPOP3 Basic/Standard and VPOP3 Enterprise? * Do I have to pay VAT? * Will I receive a VAT invoice? * What are the limitations of the Home User licence Sales Questions * How can I place an order? * Can I add two licences together? * I got a copy of VPOP3 via Trialpay and would like a refund General * How do I get support? * VPOP3 Roadmap * What do I do if I have lost my VPOP3 licence details?… text/html 2018-12-05T15:24:44+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/faq:how_can_i_place_an_order?rev=1544023484&do=diff How can I place an order Online The easiest way to place an order is online. Click on the Purchase item in our website navigation bar, and select the appropriate product. You will be presented with a price list. Choose the required item and click the text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/faq:website_login?rev=1542192349&do=diff How do I login to the PSCS website? You can access your licence details and invoices on the www.pscs.co.uk website. To log into the website click the Login button at the top right of the website. You will log in using the email address you specified linked to your account (usually the email address you used when placing your order) and your password. The password is initially randomly generated and emailed to you with your invoice(s). If you have not received the password, or have forgotten i… text/html 2026-03-23T10:18:43+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:create_an_ssl_certificate?rev=1774261123&do=diff How to create an SSL Certificate VPOP3 Enterprise supports SSL certificates for encrypted sessions. The basic mechanism to create an SSL certificate is that you have to generate a CSR (Certificate Signing Request) then send that to a CA (Certificate Authority) who will sign your certificate and give you the certificate back. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:french_webmail_language_file?rev=1542192349&do=diff French Webmail Language File Copy/paste the text below to a file 'french.lng' or 'francais.lng' in the VPOP3 directory. (French users, feel free to update/correct the text below) #login page logintitle=VPOP3 Login webadminlogin=web admin login webmaillogin=web mail login enterusername=You must specify your VPOP3 username here bookmarksnotsupported=I'm sorry, but your web browser does not support this function. You will have to add this page to your bookmarks manually. loginfailed=Login Faile… text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:how_to_share_domains_between_exchange_and_vpop3?rev=1542192349&do=diff How to 'share' domains between Exchange and VPOP3 If you want to have a VPOP3 server and Exchange Server using the same email domain, then you need to ensure that Exchange does not think it is 'authoritative' for the domain in question. See <http://support.microsoft.com/Default.aspx?kbid=321721> for details of how to do this in Exchange 2000 and 2003 (a similar process may be used in later versions of Exchange - contact your Microsoft Support technician if you need more help). text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:initial_user?rev=1542192349&do=diff Initial User When you install VPOP3 it will ask you to create an initial user. This counts towards your user count and is created as your initial administrator account. More administrator accounts can be created later if you wish, and you can remove the initial user if you wish. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:problems_accessing_vpop3_settings?rev=1542192349&do=diff Problems accessing VPOP3 Settings If you have problems accessing the VPOP3 settings: * Go to Start -> Programs -> VPOP3 -> Configure VPOP3 on the VPOP3 computer. That should open up a web browser and take you to the login page * If VPOP3 doesn't show the login page, and shows a '403' error page instead, that means that the access restrictions for the WebMail service have been restricted so that this computer cannot access the WebMail service. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:upgrade_vpop3?rev=1542192349&do=diff How To Upgrade VPOP3 Note: if you are upgrading to VPOP3 version 5 or later from version 4 or earlier, please see How To Upgrade VPOP3 to version 5 Upgrading VPOP3 is a straightforward process. Download VPOP3 from our web site and ideally back up your current installation just in case something goes wrong. Then simply run the installer that you downloaded and install it over the top of your existing VPOP3. All your settings and mail will be preserved. text/html 2019-11-12T16:06:44+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:v2_-_move_to_a_new_pc?rev=1573574804&do=diff How To Move VPOP3 Version 2 to a New PC (Also applies to version 1.x) To move VPOP3 to a new PC you should go through the following steps: * Copy the VPOP3 files * Copy the VPOP3 directory and subdirectories from the old PC to the new PC. (If you are moving to Windows Vista/2008/7/2012/8 or later, do NOT copy the files to a 'Program Files' folder on the new PC. Recent versions of Windows have special protection for those folders, which is not compatible with VPOP3) text/html 2019-11-12T16:09:08+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:v3_-_move_to_a_new_pc?rev=1573574948&do=diff Move VPOP3 Version 3 or 4 to a new PC Moving VPOP3 Version 3 or 4 to a new PC is slightly different from moving earlier versions, because of the database system. The summary of steps is: * Stop VPOP3 on the original PC * Manually make a backup of the database on the original PC text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:smtp_ids_ips?rev=1542192349&do=diff SMTP Server -> IDS/IPS The IDS/IPS tab lets you set logging and automatic blocking parameters for the IDS (Intrusion Detection System) and IPS (Intrusion Prevention System) component of the SMTP server. SMTP servers are regularly attacked, both by incoming mail attacks (spam/viruses etc) and relay attacks (by spammers and other malware distributors trying to send mail through them). Because of this, there is a system in VPOP3 which will track attack attempts on the SMTP service and can automat… text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:webmail_advanced?rev=1542192349&do=diff Webmail -> Advanced tab This page is reached from Services -> Webmail Server, then the Advanced tab. Here you can set various options for the VPOP3 Webmail/settings service. Allow Password in URL If you check this option, then you can specify the user's password in a text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:whats_new_in_version_5_webmail?rev=1542192349&do=diff What's new in version 5 webmail? This is a list of some of the most noticeable changes to VPOP3's webmail interface for version 5. For a more detailed list of changes, view our bugtracker. [VPOP3 Version 5 - mobile compatible webmail] Mobile compatible webmail If you access version 5 webmail from a mobile device, you will probably be redirected to the mobile compatible version. It is a cut-down version of Webmail, which retains the key features, but doesn't utilise the extra features which w… text/html 2026-03-16T16:00:10+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/wiki:syntax?rev=1773676810&do=diff Formatting Syntax DokuWiki supports some simple markup language, which tries to make the datafiles to be as readable as possible. This page contains all possible syntax you may use when editing the pages. Simply have a look at the source of this page by pressing text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/adminapi:outmsgrecipients?rev=1542192349&do=diff OutMsgRecipients Replacement Use: [~outmsgrecipients~] Required parameter: MsgID This returns a JSON array containing details on the recipients for the specified message in the VPOP3 out queue. There is one object returned per recipient, and the object is: text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/faq:can_you_remotely_log_into_our_vpop3_computer_to_fix_a_problem?rev=1542192349&do=diff Can you remotely log into our VPOP3 computer to fix a problem? We can remotely log into your VPOP3 computer if you wish. However, this is not a free service, and needs purchased technical support, either on an annual support contract, or on a pay-per-incident basis ( text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/faq:do_i_need_a_static_ip?rev=1542192349&do=diff Dynamic IP Address VPOP3 needs to run on a computer with a static (fixed) IP address on the 'local network'. This does not mean that it will not work with ISPs that dynamically assign IP addresses! A computer which has both a LAN adapter AND a dial-up adapter will have two IP addresses: one for the text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/faq:encryption?rev=1542192349&do=diff Encryption There are several different encryption methods used on the Internet which are relevant to VPOP3. Current versions of VPOP3 Basic will be able to connect to other POP3 or SMTP servers using either SSL or TLS. This allows you to use VPOP3 to access services such as GMail which require SSL/TLS. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/faq:gdpr_other_hosting?rev=1542192349&do=diff GDPR for other hosting services (eg web hosting) As a hosted service provider, we are classed as a “Data Processor” under the GDPR regulations. For our hosting services: * Data is held in the UK. Data is not transmitted outside of the EU except at your explicit request or command. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/faq:i_got_a_copy_of_vpop3_via_trialpay_and_would_like_a_refund?rev=1542192349&do=diff I got a copy of VPOP3 via TrialPay and would like a refund If you obtained a VPOP3 Home User licence via <http://www.trialpay.com> and are unhappy with it, you will need to get in touch with TrialPay directly. Our licence is given as a complimentary offer after you have purchased through them, and they have notified us with your details. text/html 2021-06-29T08:35:43+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/faq:smtp_relay_service?rev=1624955743&do=diff SMTP Relay Service FAQ We provide an SMTP Relay Service for many of our customers. The price starts from £40 (+VAT if applicable) per year, for up to 5000 messages, or 750MB, per month. How do I order the SMTP Relay Service? To order the SMTP relay service, either email text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/faq:will_i_receive_a_vat_invoice?rev=1542192349&do=diff Will I receive a VAT invoice? We always send out VAT invoices for all purchases. These are sent as PDF files by email within a few days after your purchase. You can also access the invoices on our website, by logging into our website using your login details. vat invoice text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:535_authentication_failed?rev=1542192349&do=diff 535 Authentication Failed This is an SMTP error meaning that an attempt to authenticate has failed. If this error is appearing when the email client is trying to log into VPOP3, then you can check the VPOP3 'SECURITY.LOG' file which may contain more information, such as an invalid password, unknown username, etc. (This information is not returned in the SMTP session because it would help an attacker). text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:autoresponders_out_of_office?rev=1542192349&do=diff Autoresponders / Out of Office VPOP3 has an autoresponder facility for sending automatic replies when a message arrives in a mailbox. This is often used for 'Out of Office' replies, but it is not limited to that use. To set an autoresponder, the administrator can edit the user and go to the text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:backup_vpop3?rev=1542192349&do=diff How to Backup VPOP3 By default VPOP3 v3 and later will automatically perform a daily backup of the database into a file called DBBACK-x.DMP, where the backup file rotates on a weekly basis (DBBACK-0.DMP is Sunday's backup, DBBACK-1.DMP is Monday's backup, etc). text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:calendar_on_ios?rev=1542192349&do=diff Configuring Calendar on iOS These instructions are for configuring a new Calendar account on iOS for iPhone, iPad and iPod Touch. The version of iOS used for these instructions is iOS v6.0, but they will probably work or help with other versions of iOS. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:calendars?rev=1542192349&do=diff Calendars To use the calendar facility in VPOP3 you need a CalDAV aware client. We have tested it with the free Mozilla Sunbird & Lightning products as well as the emClient email client. These products need a URL to be able to access the CalDAV data store. Once you have the URL (see below), copy it into the text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:configure_a_router_to_allow_incoming_smtp?rev=1542192349&do=diff Accepting Incoming SMTP through a router If your ISP is providing you with an SMTP mail feed (incoming SMTP) and you have VPOP3 connecting to the ISP through a router then you will probably need to modify the router configuration to allow this. Most routers' default configuration will only allow outbound connections (ie connections from the local network out to the Internet). If you need to accept incoming SMTP mail, then you need to tell the router to allow inbound connections on port 25 for … text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:download_rules?rev=1542192349&do=diff Download Rules Download rules are applied to messages downloaded using a POP3 mail collector. To configure the rules, go to the VPOP3 settings, then Mail Connectors -> Mail Collectors -> POP3 General. There is an Edit Download Rules button which brings up the download rule editor. To tell this mail collector to use the download rules, ensure that the text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:email_-_fax?rev=1542192349&do=diff How to send a fax by email using the VPOP3 FaxServer VPOP3 2.1.0 and later together with the VPOP3 FaxServer software allows you to send specially crafted emails to VPOP3 to have them sent as faxes. To do this, send an email to fax@<yourdomain> . The email subject will be the subject of the fax used on the fax cover page. The email should be in plain text (not text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:exchange_2003?rev=1542192349&do=diff Setting up VPOP3 to work with Exchange 2003 The instructions below are for Exchange Server 2003. For other versions of Exchange see here. You can link VPOP3 to Exchange Server, so that Exchange Server sends outgoing mail through VPOP3 and VPOP3 sends any incoming mail directly to Exchange Server. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:exchange_2007?rev=1542192349&do=diff Exchange 2007 You can link VPOP3 to Exchange Server, so that Exchange Server sends outgoing mail through VPOP3 and VPOP3 sends any incoming mail directly to Exchange Server. You should first of all set up VPOP3 to send and receive Internet email as normal. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:fax_global_address_book?rev=1542192349&do=diff Fax Printer Driver Address Book The VPOP3 Fax Printer Driver obtains address book details using LDAP. So, you must make sure that the VPOP3 LDAP service is enabled, and that the Fax Printer Driver has the correct VPOP3 address, and the same TCP/IP port defined to access the LDAP service as VPOP3 is using. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:find_ip_address_of_vpop3?rev=1542192349&do=diff Find the IP address of the VPOP3 Computer To find the IP address of the VPOP3 computer, in Windows go to Control Panel -> Network and Sharing Center. Press the Local Area Connection link Then press 'Details'. Look for the 'IPv4 Address' setting. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:full_text_search?rev=1542192349&do=diff Full Text Search In VPOP3 Enterprise v7.0 a facility for full-text-search on message content was added. Because the full-text-search indexes can be quite big, this facility is optional. For several reasons, the full-text-search is stored in a separate PostgreSQL database. This means that it is not backed up with your standard backups. After a restore, the full-text-search index can be rebuilt from the raw message content. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:german_webmail_language_file?rev=1542192349&do=diff German Webmail Language Page Copy/paste the text below to a file 'german.lng' in the VPOP3 directory. (German users, feel free to update/correct the text below) #login page logintitle=VPOP3 Login webadminlogin=web admin login webmaillogin=Webmail Anmeldung enterusername=Sie m&uuml;ssen einen Benutzernamen angeben bookmarksnotsupported=I'm sorry, but your web browser does not support this function. You will have to add this page to your bookmarks manually. loginfailed=Anmeldung fehlgeschlagen … text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:install_the_status_monitor_on_other_pcs?rev=1542192349&do=diff How to install the VPOP3 Status Monitor on other PCs The VPOP3 status monitor icon is run by a separate program from VPOP3, which communicates with VPOP3 using TCP/IP. This means that this program can be installed on any PC which can connect to the VPOP3 computer using TCP/IP (on port 5109 by default). text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:install_to_external_pgsql?rev=1542192349&do=diff Install VPOP3 using external PostgreSQL database (VPOP3 version 5 or later) In some cases, advanced users may wish to have VPOP3 use an external PostgreSQL database instead of the one installed with VPOP3. This is possible by telling VPOP3 the connection details during installation. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:installed_new_router_and_now_nothing_works?rev=1542192349&do=diff We installed a new router and now nothing works If you installed a new router on your network and left it at the default settings, you may find that VPOP3 doesn't seem to work afterwards. This is because it may be that the new router allocates new IP addresses on your network. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:invalid_helo_name?rev=1542192349&do=diff SMTP error 'Invalid HELO name' When sending mail you may get an error from the remote SMTP server saying something like 'Invalid HELO name' This happens if the host name configured in VPOP3 does not look like a valid Internet host name (e.g. 'mail.domain.com'). Some SMTP servers don't bother checking this value because it has no authentication value at all, but a few do check that it looks correct. text/html 2026-04-06T17:59:47+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:mail_not_downloading_from_isp?rev=1775498387&do=diff Mail Not Downloading From ISP This normally happens because you have told VPOP3 to Leave Messages On Server (on the Mail Connectors -> Mail Collectors -> (name) -> POP3 General tab). If you do this, VPOP3 will leave messages on the ISP's mail server for several days, and remember that it has already downloaded them. Then, the next time it connects it will see that there are some messages waiting, but it may find that it has already downloaded them, so it won't download them again. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:message_downloads_not_completing?rev=1542192349&do=diff Message Downloads Not Completing The normal reason for message downloads not completing is that a third-party antivirus program is scanning the messages and getting stuck at some point. We recommend that the first thing you do is to temporarily disable the email scanning part of any antivirus program or Internet Security software on the VPOP3 computer (other than those integrated fully with VPOP3 - i.e. 'avast! for VPOP3' or 'Sophos SAV Interface'). Usually that will solve the problem. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:obtaining_message_headers?rev=1542192349&do=diff How to Obtain Message Headers Most people are familiar with mail headers such as From:, To:, Subject: etc. but there are many more which most people never see. Quite often we need to see the full internet mail headers from an e-mail that is causing problems. This article explains how to get hold of them in some of the more common e-mail clients. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:out_of_disk_space_when_sending_mail?rev=1542192349&do=diff Out of Disk Space When Sending Mail The first thing you should do is check that there is enough free disk space on the disk where VPOP3 is installed. VPOP3 requires a certain amount of free space before it will allow new messages to be sent, so the disk might not be totally full, but VPOP3 will still report that there is insufficient disk space when you try to send a new message. This buffer zone is designed to help prevent the disk totally filling up, which can cause lots of bigger problems! text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:performance_requirements?rev=1542192349&do=diff Performance Requirements The performance requirements for VPOP3 depends on many factors, so we can't give specific details for any scenario. How to detect limiting factors * Use the Windows Performance Monitor (perfmon.msc) * Add counters for: text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:pop3_client_problem?rev=1542192349&do=diff VPOP3 - POP3 Client Problem These errors occur whilst VPOP3 is communicating with your ISP's POP3 mail server to retrieve your mail. The server connection was closed unexpectedly If the message text is Error with Pop3 Client (XXXX (YY)) The server connection was closed unexpectedly text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:postgresql_server_won_t_start_due_to_damaged_log_files?rev=1542192349&do=diff PostgreSQL server won't start due to damaged log files If the PostgreSQL server won't start at all, because its transaction logs are damaged, you will probably need to recreate the database store totally. To rebuild the database: * Open a command prompt and find the VPOP\pgsql folder text/html 2025-09-11T13:48:07+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:recovering_messages_from_corrupted_database_into_fresh_database?rev=1757598487&do=diff Recovering messages from corrupted database into fresh database If the VPOP3 message database is corrupted, then one option is to build a fresh database and restore the settings into it, then recover the messages from the old database using the 'Message Restore' function in VPOP3. This has minimal downtime, but old messages will not all be available until the restore has completed. New messages will be available quickly, and you will be able to send messages. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:require_smtp_authentication?rev=1542192349&do=diff Require SMTP Authentication There are some situations where VPOP3 needs to know who is sending mail. This may be if you have VPOP3 configured to behave differently depending on who is sending messages - eg if you have different message size limits depending on the sender, or if you have message monitoring configured for certain users, or you don't want certain people to be able to send mail at all. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:seeing_where_a_message_came_from?rev=1542192349&do=diff Seeing where a message came from Sometimes you need to check to see where a message really came from. The 'From:' email address is easily forged, so that cannot be relied upon. The first thing you have to do is to get the full message headers. These may look daunting, but are very useful for problem diagnosis. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:setup_steps_for_multiple_pop3_accounts_at_the_isp?rev=1542192349&do=diff Setup steps for multiple POP3 accounts at the ISP * Set up all the local users you need in the 'Users' page in the VPOP3 settings. The usernames & passwords do not have to have any relation to the ISP's accounts. These are the details which the users will put in their email clients (eg Outlook) to collect their mail from VPOP3. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:spanish_webmail_language_file?rev=1542192349&do=diff Spanish Webmail Language File Copy/paste the text below to a file 'spanish.lng' or 'espanol.lng' in the VPOP3 directory. (Spanish users, feel free to update/correct the text below) #login page logintitle=VPOP3 Login webadminlogin=web admin login webmaillogin=web mail login enterusername=Especificar aca el usuario de Correo bookmarksnotsupported=Disculpe, pero su navegador no soporta esta funcion. loginfailed=Login Fallido - Favor reintente nuevamente invalidlogin=Detalles del login inválidos… text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:upgrade_licence_key?rev=1542192349&do=diff How to upgrade your VPOP3 licence You can purchase a VPOP3 upgrade by going to <http://www.pscs.co.uk/buynow/vpop3_upgrade.php> You will need to enter your current licence details, and the website will give you your upgrade options. If you want to upgrade the licence size or from VPOP3 Basic to VPOP3 Enterprise at the same time as upgrading to the latest version of VPOP3, then choose the 'Upgrade to the latest version' option, and you will be given further choices of licence upgrades you can … text/html 2019-11-08T15:37:52+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:upgrade_vpop3_to_version_5?rev=1573227472&do=diff How To Upgrade VPOP3 to version 5 or later Upgrading VPOP3 is usually a straightforward process. Download VPOP3 from our web site and back up your current installation just in case something goes wrong. Then simply run the installer that you downloaded and install it over the top of your existing VPOP3. All your settings and mail will be preserved. text/html 2020-06-29T10:43:58+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:upgrade_vpop3_to_version_7?rev=1593427438&do=diff How to upgrade VPOP3 to version 7 or later from version 6 or earlier As usual the process to upgrade is simply to install the later version over your existing installation (do not uninstall anything first). The below is technical information detailing an extra step performed by the installer in this particular upgrade step. text/html 2020-09-03T15:07:34+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:upgrade_vpop3_to_version_8?rev=1599145654&do=diff Upgrading VPOP3 to version 8.x from v7 or earlier VPOP3 v8.x uses PostgreSQL 10 as its database engine, which is the latest supported 32 bit version of PostgreSQL. Later versions of PostgreSQL are 64-bit only, which means we cannot use them while continuing to support 32 bit versions of Windows. text/html 2026-03-18T20:49:54+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:upgrade_vpop3_to_version_9?rev=1773866994&do=diff Upgrading VPOP3 to version 9.x from v7 or v8 VPOP3 v9 and later requires a 64 bit version of Windows 8.1 or later VPOP3 v9.x uses PostgreSQL 18 as its database engine. This can only easily be upgraded from PostgreSQL 9.3 or later, which means it must be an upgrade of VPOP3 v7 or later. If you are using an earlier version of VPOP3, then upgrade it to v8.7 first, then upgrade to v9 or later text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:use_the_vpop3_status_monitor?rev=1542192349&do=diff How to use the VPOP3 Status Monitor The VPOP3 Status Monitor is a small program which displays a postbox icon (usually red) in the Windows notification area (usually at the bottom right of the screen - by the clock). This icon can be used for quick access to various VPOP3 facilities. Note that the Status Monitor is text/html 2026-04-21T11:12:40+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:v5_-_move_to_a_new_pc?rev=1776769960&do=diff Move VPOP3 Version 5 (or later) to a new PC Moving VPOP3 Version 5 or later to a new PC is slightly different from moving earlier versions, because of the database system, which was introduced for version 3 and modified for version 5. The summary of steps is: * Stop VPOP3 on the original PC text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:vpop3_access_security?rev=1542192349&do=diff How To Setup VPOP3 Service Security VPOP3 can be configured to restrict access to its various services depending on the client computer's IP address. This is useful if you want to allow access from only certain IP addresses (eg within your LAN) and prevent access from other IP addresses (eg the Internet). text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:vpop3_cannot_access_postgresql_-_timeout_expired?rev=1542192349&do=diff VPOP3 cannot access PostgreSQL - timeout expired This is an error which may be logged in the Windows event log It is event 4547 from the source 'VPOP3' If the event message DLL is not correctly installed it may display as: The description for Event ID ( 4547 ) in Source ( VPOP3 ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this desc… text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:vpop3_not_starting_properly?rev=1542192349&do=diff VPOP3 Not Starting Properly If VPOP3 is not starting properly, then the first thing to check is whether the database server is starting. In VPOP3 v3 and later, VPOP3 uses a PostgreSQL Database server for data storage, so if the database server is not running, VPOP3 will not be able to start properly. In this case, the VPOP3.EXE process may appear in Task Manager, but it won't respond to anything, or it may appear in Task Manager and then stop after a short period. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:vpop3_status_monitor_problems?rev=1542192349&do=diff VPOP3 Status Monitor Problems The VPOP3 Status Monitor is the program which shows the little (usually red) postbox icon in the Windows task tray. This usually launches automatically from the Windows startup group. This program is VPOP3Status.EXE on the disk, or can be run manually from text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:vpop3_xxxxx_server_access_not_allowed?rev=1542192349&do=diff VPOP3 Server Access Not Allowed If you get an error like: -ERR VPOP3 Server access not allowed! when trying to access VPOP3, then this means that the relevant server's IP Access Restrictions defined in VPOP3 do not allow access from your client computer. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:vpop3_xxxxx_server_access_not_allowed_-_see_your_administrator?rev=1542192349&do=diff Error Message - VPOP3 xxxx Server Access Not Allowed - See Your Administrator If you get an error message when trying to connect to the VPOP3 SMTP/POP3/IMAP4/etc service which says VPOP3 xxxx Server Access not allowed - See your administrator (where xxxx is replaced with the specific service name, and there may be protocol specific error codes before the message) text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/mailapi:autoresponderinfo?rev=1542192349&do=diff AutoresponderInfo Replacement Use: ~autoresponderinfo~ Required parameter: responderid - the ID of the autoresponder This returns a JSON structure containing the details of the specified autoresponder. The return structure is an object containing: text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/mailapi:messageview4?rev=1542192349&do=diff MessageView4 Replacement Use: ~messageview4~ Parameters: * “headers” (optional - “y” means show full headers, otherwise show condensed headers) * “msgformat” (optional - specifies format of 'message' in result. “text” means UTF8 text, otherwise UTF8 text/html 2023-03-25T23:33:31+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:archive_script?rev=1679787211&do=diff Archive Script (from VPOP3 v6 onwards) Archive scripting lets you indicate whether full message content should be stored in the message archive. This could be used, for instance, for filtering out messages containing credit card details. The message headers will still be archived, along with the explanation text returned by the script. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:attachment_extraction_script?rev=1542192349&do=diff Attachment Extraction Scripting This is the 'extraction.lua' script. (Added in V6.17) This script has one functions: * Extract This functions is called if the attachment extraction is enabled in Settings -> Attachment Processing -> Extraction. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:autoresponder_commands?rev=1542192349&do=diff Autoresponder Commands This article only applies to VPOP3 v4 and earlier A VPOP3 autoresponder can contain special text strings to create special behaviour, in addition to plain text as part of the response. There are three types of 'command' * text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:autoresponders_v3_v4?rev=1542192349&do=diff Autoresponders - v3 and v4 This section lets you define an autoresponder for a user. An autoresponder is a message which is sent back in response to a message which arrives in this user's mailbox. The Autoresponder Type can be set to None, Simple Autoresponder text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:database_backups?rev=1542192349&do=diff Database -> Backups Tab The Backups tab lets you specify how VPOP3 will make its daily backup of its database. We strongly recommend that you backup the database regularly in case of disk problems or file corruption. You can use the VPOP3 backup feature, or manually backup the PostgreSQL database using the pg_dump command, or use another program to backup the PostgreSQL database if you wish. Note that a simple disk copy will text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:database_restore?rev=1542192349&do=diff Database -> Restore Tab This tab is only in VPOP3 Enterprise (v5 and later), and is for performing a partial (mailbox/mail folder) restore of the database. To do a full restore of the database, or for VPOP3 Basic/Standard, see the “Restore a Backup of VPOP3” topic Using the text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:db_users?rev=1542192349&do=diff Users database schema The Users database schema contains details of users and their settings etc. Tables * users * usersettings * useraddresses * autoresponders * autorespondercopyto * autoresponderlog * autoresponderconditions * autoresponderattachments * autoresponderto * groups * groupdata * lists * listsubscriptions * listmoderation * listmembers * listdata * listarchive text/html 2023-11-12T09:51:40+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:dmarc_reporter_script?rev=1699782700&do=diff DMARC Reporter Script (from VPOP3 v8.6 onwards) This script lets you customise how VPOP3 sends DMARC reports to the sending domain. This can be useful in case the sending domain's DMARC configuration is incorrect as that can cause errors sending the reports or cause messages to be 'stuck' in VPOP3's Outqueue. These problems won't cause any lasting damage, but may be inconvenient or annoying, so you can alter the behaviour using Lua scripting text/html 2025-08-20T16:08:40+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:lan_forwarding_script?rev=1755706120&do=diff LAN Forwarding Scripting (Added in V8.7) This is stored in the 'LanForwarding.lua' script in Settings -> Scripts Pre-send These functions are called before the message is placed in the LAN Forwarding queue There are two global variables set: * text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:logdb_attachments?rev=1542192349&do=diff LogDB.Attachments table The LogDB.Attachments table contains a record of the attachments for messages logged by VPOP3. A message may have zero or more attachments Columns * attachid - this is a bigint sequential value which identifies the attachment uniquely in the database text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:logging?rev=1542192349&do=diff Logging Activity Summary Reports You can tell VPOP3 to send you a daily summary report each day. To do this check the box to say Send daily summary logs to, and choose the appropriate user (or “Main Administrator” if you want the reports to be sent to the text/html 2026-02-24T15:49:48+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:lua_smtp_mx_control?rev=1771948188&do=diff Lua SMTP MX Control Every time VPOP3 is going to send messages using direct MX sending, it runs a script called mxout.lua which can be created/edited in Settings -> Scripts (or in the VPOP3 directory in VPOP3 v6.6 or earlier). Global Variables Starting with v8.8, the following global variables are defined: text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:mappings?rev=1542192349&do=diff Mappings In VPOP3, Mappings are a way of explicitly linking an email address to a user or list. They can also be used to indicate that an email address is remote, even though it would otherwise appear to be a local email address. In other email servers, a similar feature may be called 'aliases' text/html 2024-03-21T10:49:54+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:outgoing_message_script?rev=1711018194&do=diff Outgoing Message Scripting Every time VPOP3 adds a message to the Outgoing mail queue, it runs a script called outmessage.lua. Scripts are stored as files in the VPOP3 directory in VPOP3 v6.6 and earlier, or managed through the Settings -> Scripts page in VPOP3 v6.7 and later. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:pop3_general?rev=1542192349&do=diff POP3 Server -> General Tab Services -> POP3 Server -> General tab This page sets the general settings for the POP3 service component in VPOP3. The POP3 service is how users collect their email from VPOP3 using a POP3 email client Service Name The Service Name is a name you give the service for your reference. It is only used in administrative displays and logging, so the name doesn't matter. Most people leave it at the default. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:reference?rev=1542192349&do=diff VPOP3 Reference This is a reference guide for VPOP3 version 3 or later's settings. For details on how to do things, rather than what a particular button does, see the how to section. Also see the online manual: * Users * Lists * Mappings * Mail Connectors * Services * Settings * Status * Reports * About * Status Monitor * text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:reports?rev=1542192349&do=diff Reports The Reports tab lets you access various reports about VPOP3 or message history. For many of reports to work, you need to have previously enabled historical logging. The currently available reports are listed below. To view a report, click on its name at the left of the page text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:send_admin_message?rev=1542192349&do=diff Send Admin Message It is possible for administrator users to send a bulk email message to an entire group or list. To begin composing an email, go to the Administration Settings -> Users page, and click Send Admin Message. This should then open a window, which allows you to specify various options. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:smtp_advanced?rev=1542192349&do=diff SMTP Service -> Advanced Tab Services -> SMTP Server -> Advanced Tab Refuse SMTP Connections from This setting should be rarely needed, and should be normally left blank. It is here for historic purposes. If you put some text in this box, then VPOP3 will refuse any SMTP connections from clients whose 'HELO'/'EHLO' command data contains the text specified here as a substring. Eg, if this setting is set to '.myisp.com', then VPOP3 would refuse SMTP connections from any client which sends the c… text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:smtp_general?rev=1542192349&do=diff SMTP -> General tab This page is reached from Services -> SMTP Server, then the General tab. This page lets you set general settings for the SMTP service component of VPOP3. The SMTP service is how users send outgoing mail, and how incoming SMTP messages arrive. Service Name text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:smtp_vrfy_expn?rev=1542192349&do=diff SMTP Service -> VRFY/EXPN Tab Services -> SMTP Server -> VRFY/EXPN Tab VRFY and EXPN are SMTP commands which allow another computer to verify email addresses without sending mail to them. See RFC 5321 for technical details. Usually, these commands should be disabled for security purposes, but some other software may be able to use these commands for various reasons. In this case, you can enable them, but restrict access to the IP address(es) you trust. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:smtpstats?rev=1542192349&do=diff SMTPStats database schema The SMTPStats database schema contains details of SMTP usage. Tables * smtpclientfailures * smtpusage text/html 2023-01-18T15:57:13+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:spam_filter_rules?rev=1674057433&do=diff Spam Filter Rules VPOP3 Versions 2.1.7 and later have a built-in spam filter system which supports a simple script language optimised for content- and spam-filtering of email messages. This reference contains a definition of the spam filtering script language supported by VPOP3. Note that as later versions of VPOP3 are released, more language features may be added, so this reference indicates in which version of VPOP3 a particular feature was added.