https://wiki.pscs.co.uk/ 2026-04-08T03:58:23+00:00 https://wiki.pscs.co.uk/ https://wiki.pscs.co.uk/_media/wiki:dokuwiki.svg text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:filtering_attachments?rev=1542192349&do=diff How to filter attachments VPOP3 can filter attachments in several ways. The most general is to use the Settings -> Attachment Processing -> Filtering tab as described below. VPOP3 can also filter attachments using the content/spam filter, or by using an integrated virus scanner. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:mozilla_thunderbird?rev=1542192349&do=diff How to configure Mozilla Thunderbird This article won't show you all the possible settings in Thunderbird, because there are so many. Thunderbird is one of the most powerful & flexible email clients available at the time of writing, especially if you use IMAP4 (with VPOP3 Enterprise). text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:vpop3_not_starting_properly?rev=1542192349&do=diff VPOP3 Not Starting Properly If VPOP3 is not starting properly, then the first thing to check is whether the database server is starting. In VPOP3 v3 and later, VPOP3 uses a PostgreSQL Database server for data storage, so if the database server is not running, VPOP3 will not be able to start properly. In this case, the VPOP3.EXE process may appear in Task Manager, but it won't respond to anything, or it may appear in Task Manager and then stop after a short period. text/html 2026-03-23T10:18:43+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:create_an_ssl_certificate?rev=1774261123&do=diff How to create an SSL Certificate VPOP3 Enterprise supports SSL certificates for encrypted sessions. The basic mechanism to create an SSL certificate is that you have to generate a CSR (Certificate Signing Request) then send that to a CA (Certificate Authority) who will sign your certificate and give you the certificate back. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:installed_new_router_and_now_nothing_works?rev=1542192349&do=diff We installed a new router and now nothing works If you installed a new router on your network and left it at the default settings, you may find that VPOP3 doesn't seem to work afterwards. This is because it may be that the new router allocates new IP addresses on your network. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:use_the_vpop3_status_monitor?rev=1542192349&do=diff How to use the VPOP3 Status Monitor The VPOP3 Status Monitor is a small program which displays a postbox icon (usually red) in the Windows notification area (usually at the bottom right of the screen - by the clock). This icon can be used for quick access to various VPOP3 facilities. Note that the Status Monitor is text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:custom_filtering_incoming_mail?rev=1542192349&do=diff Custom filtering incoming mail If you want to filter incoming mail using custom rules there are a few ways of doing this, depending on your exact requirements. * Download rules - if your incoming mail is via POP3 collection, you want to filter on headers, size etc (not contents) text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:database_size?rev=1542192349&do=diff VPOP3 Database Size The VPOP3 directory is stored in the VPOP3\pgsql\data folder and subfolders. If you are concerned about the size of the VPOP3 database, there are several factors which may make the database larger than you would expect: * The VPOP3 database contains a lot more information than just messages in mailboxes. This can include settings, outgoing messages, historical logging information, statistical information for the spamfilter, information about archived messages, etc. Also,… text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:full_text_search?rev=1542192349&do=diff Full Text Search In VPOP3 Enterprise v7.0 a facility for full-text-search on message content was added. Because the full-text-search indexes can be quite big, this facility is optional. For several reasons, the full-text-search is stored in a separate PostgreSQL database. This means that it is not backed up with your standard backups. After a restore, the full-text-search index can be rebuilt from the raw message content. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:ical_on_mac_osx?rev=1542192349&do=diff Configuring iCal on Mac OSX to connect to VPOP3's CalDAV service This requires VPOP3 v6 or later. The following instructions are for Mac OS X v10.7.5 but should work with similar versions. We have not been able to create an account by going to System Preferences text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:inbox_size_is_zero_but_mailbox_size_is_not_zero?rev=1542192349&do=diff Inbox size is zero but mailbox size is not zero In the VPOP3 settings sometimes, on the user account list the “Inbox Count” is shown as zero, but the “Mailbox Size” is not zero. This is not a bug, or mistake - the two figures are showing different things. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:no_transport_provider_is_available?rev=1542192349&do=diff Outlook/Windows Messaging reports "No transport provider is available" If Outlook or Windows Messaging reports No transport provider is available when trying to connect to VPOP3, it can mean several things. (This must be a contender for “the world's most meaningless error message text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:restore_folder_-_v5?rev=1542192349&do=diff Restore selected mail folders or mailbox in VPOP3 v5 or later (This option is only available in VPOP3 Enterprise) First - if the problem is that messages were deleted very recently (the default is within 3 days), you can probably use the Undelete feature in VPOP3. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:timeout_problems_when_sending_or_receiving_attachments?rev=1542192349&do=diff Timeout problems downloading/uploading messages with attachments There are various possible reasons for this, usually to do with third party internet security software but they may also be associated with Windows TCP/IP or dial-up adapter issues. You may not have problems with other software, but that doesn't mean the problem is being caused by VPOP3. text/html 2020-06-29T10:43:58+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:upgrade_vpop3_to_version_7?rev=1593427438&do=diff How to upgrade VPOP3 to version 7 or later from version 6 or earlier As usual the process to upgrade is simply to install the later version over your existing installation (do not uninstall anything first). The below is technical information detailing an extra step performed by the installer in this particular upgrade step. text/html 2024-09-02T08:35:41+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:v5_-_move_to_a_new_pc?rev=1725266141&do=diff Move VPOP3 Version 5 (or later) to a new PC Moving VPOP3 Version 5 or later to a new PC is slightly different from moving earlier versions, because of the database system, which was introduced for version 3 and modified for version 5. The summary of steps is: * Stop VPOP3 on the original PC text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:vpop3_access_security?rev=1542192349&do=diff How To Setup VPOP3 Service Security VPOP3 can be configured to restrict access to its various services depending on the client computer's IP address. This is useful if you want to allow access from only certain IP addresses (eg within your LAN) and prevent access from other IP addresses (eg the Internet). text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:vpop3_historical_logger_backlog?rev=1542192349&do=diff VPOP3 Historical Logger Backlog This problem is primarily related to VPOP3 versions 2.5 -> 2.6. Theoretically it could happen on later versions, but would be extremely unusual (see the note at the bottom if you are using version 3.0 or later) You get an error message with subject text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:whitelist_blacklist?rev=1542192349&do=diff Spamfilter Whitelist & Blacklist The VPOP3 spamfilter has a whitelist and a blacklist for sender addresses. It also has a whitelist and blacklist for words/phrases. You can view these lists in the VPOP3 settings by going to Settings -> Spamfilter -> text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:10053?rev=1542192349&do=diff Socket Error 10053 - An established connection was aborted by the software in your host machine. Error 10053 means that an established connection has been dropped. There are three descriptions of this error message we know about, but the descriptions are given by Windows, so they may vary depending on your version of Windows: text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:backup_vpop3?rev=1542192349&do=diff How to Backup VPOP3 By default VPOP3 v3 and later will automatically perform a daily backup of the database into a file called DBBACK-x.DMP, where the backup file rotates on a weekly basis (DBBACK-0.DMP is Sunday's backup, DBBACK-1.DMP is Monday's backup, etc). text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:database_maintenance?rev=1542192349&do=diff Database Maintenance VPOP3 uses the PostgreSQL database server for most of its data storage. Normally this will not require any special maintenance, because it will manage itself. To do any special database maintenance you will need to close down VPOP3 first, because PostgreSQL needs exclusive access to the database to perform any operations such as decreasing the size of database files. Note that these operations may take some time! There are some PostgreSQL utility programs in the VPOP3\pgs… text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:err_mailbox_locked?rev=1542192349&do=diff -ERR Mailbox Locked error If your email client displays an '-ERR Mailbox Locked' or '-ERR [IN-USE] Mailbox Locked' error when trying to log into VPOP3 it means that the mailbox is locked. The POP3 standard requires that POP3 mailboxes have an 'exclusive lock' on them when they are in use. This means that only one POP3 client can access the mailbox at once. Also, if a POP3 mailbox is currently accessing a mailbox, then no IMAP4, Webmail or administrator access is allowed to the mailbox at the s… text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:how_to_tell_vpop3_some_users_in_the_local_domain_are_not_to_be_handled_by_vpop3?rev=1542192349&do=diff How to tell VPOP3 that some users in the local domain are not to be handled by VPOP3 In some situations you will have a situation where most of your users are handled by VPOP3, but several users will collect their mail directly from a separate POP3 account on your ISP, even though they may have an email address on the same domain as other users. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:incoming_smtp_feed?rev=1542192349&do=diff Incoming SMTP Feed An incoming SMTP feed is where incoming mail is sent directly to your mail server without going through your ISP's POP3 mail server on the way. Advantages An incoming SMTP feed has several advantages over going via a POP3 mailbox: text/html 2021-03-08T10:48:40+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:install_vpop3?rev=1615200520&do=diff How to Install VPOP3 Simply download VPOP3 from the website, and run the installation program and follow the prompts. Occasionally people may have problems with the PostgreSQL part of the installation. If that happens, please contact us either by email at support@pscs.co.uk or by phone to +44 (0)1484 855800, and we will do our best to help. text/html 2026-04-06T17:59:47+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:mail_not_downloading_from_isp?rev=1775498387&do=diff Mail Not Downloading From ISP This normally happens because you have told VPOP3 to Leave Messages On Server (on the Mail Connectors -> Mail Collectors -> (name) -> POP3 General tab). If you do this, VPOP3 will leave messages on the ISP's mail server for several days, and remember that it has already downloaded them. Then, the next time it connects it will see that there are some messages waiting, but it may find that it has already downloaded them, so it won't download them again. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:move_the_message_store_-_alternative_method?rev=1542192349&do=diff Move the message store - alternative method This method moves the database data storage location, but not the whole database. This means that the database configuration, logs, transaction logs etc are still stored in the VPOP3\pgsql\data folder, but the actual database tables & indexes are stored in the new location. This may be simpler, but, depending on your requirements, text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:not_working_as_expected?rev=1542192349&do=diff Not Working As Expected This is the page to come to if you think you've set something up correctly but it isn't doing what you think it should be doing. If you're getting an error message or some other concrete indication that something has actually 'gone wrong' then the text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:out_of_disk_space_when_sending_mail?rev=1542192349&do=diff Out of Disk Space When Sending Mail The first thing you should do is check that there is enough free disk space on the disk where VPOP3 is installed. VPOP3 requires a certain amount of free space before it will allow new messages to be sent, so the disk might not be totally full, but VPOP3 will still report that there is insufficient disk space when you try to send a new message. This buffer zone is designed to help prevent the disk totally filling up, which can cause lots of bigger problems! text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:performance_requirements?rev=1542192349&do=diff Performance Requirements The performance requirements for VPOP3 depends on many factors, so we can't give specific details for any scenario. How to detect limiting factors * Use the Windows Performance Monitor (perfmon.msc) * Add counters for: text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:pop3_webmail_imap4_can_t_see_messages_but_admin_can?rev=1542192349&do=diff POP3/Webmail/IMAP4 can't see a user's messages, but the administrator can Version 2.x only. This problem does not occur with version 3 or later. This problem can happen if the user's message index database has become damaged. The POP3, Webmail & IMAP4 services get the message summary data from the database, whereas the administrator console gets the message information directly from the message files on the disk, so if the database is corrupted, the administrator console can still see the mess… text/html 2019-11-08T15:37:52+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:upgrade_vpop3_to_version_5?rev=1573227472&do=diff How To Upgrade VPOP3 to version 5 or later Upgrading VPOP3 is usually a straightforward process. Download VPOP3 from our web site and back up your current installation just in case something goes wrong. Then simply run the installer that you downloaded and install it over the top of your existing VPOP3. All your settings and mail will be preserved. text/html 2019-11-12T16:09:08+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:v3_-_move_to_a_new_pc?rev=1573574948&do=diff Move VPOP3 Version 3 or 4 to a new PC Moving VPOP3 Version 3 or 4 to a new PC is slightly different from moving earlier versions, because of the database system. The summary of steps is: * Stop VPOP3 on the original PC * Manually make a backup of the database on the original PC text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:vpop3_xxxxx_server_access_not_allowed?rev=1542192349&do=diff VPOP3 Server Access Not Allowed If you get an error like: -ERR VPOP3 Server access not allowed! when trying to access VPOP3, then this means that the relevant server's IP Access Restrictions defined in VPOP3 do not allow access from your client computer. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:550_not_permitted?rev=1542192349&do=diff 550/553 Not Permitted error from BT Internet's mail servers BT Internet's mail servers only allow messages to be sent from 'approved' email addresses. If you try to send messages from other addresses BT's mail servers may return a '550 Not Permitted' error, a '553' error, or may silently discard the message depending on what their server feels like doing today. text/html 2025-05-21T07:57:18+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:allowing_mail_relay_through_vpop3?rev=1747814238&do=diff How To Allow Mail Relay Through VPOP3 If you are allowing remote access into VPOP3 to collect mail then you may also want those remote users to be able to send their outgoing mail through VPOP3 as well. This is more complex than allowing users to collect mail, because, by default, SMTP connections are not authenticated. This means that when someone tries to send a message through VPOP3, VPOP3 doesn't know who that user is. This can cause a problem if unauthorised users try to send mail through… text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:encrypt_sessions?rev=1542192349&do=diff How To Encrypt Sessions VPOP3 Enterprise 2.6 and later supports SSL/STARTTLS encrypted sessions to VPOP3 itself. So, the email client or web browser will encrypt the data passed to VPOP3 so it cannot be intercepted. This requires an SSL Certificate to be created for VPOP3. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:error_0x80040201_when_sending_mail_in_outlook?rev=1542192349&do=diff Error 0x80040201 when sending mail in Outlook Often this is because there is 'Read Receipt' stuck in the Outlook out queue, but these do not show in the Outlook Outbox view. We found this article helpful: <http://www.howto-outlook.com/howto/deletereadreceipt.html> If you need help with following this, you can call us, but it text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:exceptions?rev=1542192349&do=diff Exceptions An exception happens if VPOP3 encounters a problem it did not expect. In some cases it can recover automatically, but in other cases that isn't possible. Common causes VPOP3 2.6 and earlier In VPOP3 2.6 and earlier it was quite common for there to be database corruption problems with the SQLite database which was used in those versions. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:forwarded_emails_not_arriving?rev=1542192349&do=diff Forwarded Emails Not Arriving If you are having problems having VPOP3 forward incoming messages to an external address, but sending messages directly to that address works OK, and forwarding internal messages to that address works OK, then the problem may be the SMTP return address which VPOP3 is using. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:installation_checklist?rev=1542192349&do=diff Installation checklist This list contains some things you may want to check before or after installing VPOP3 to make sure it's not going to encounter any common issues. Before installation * Make sure that VPOP3 is not installed on a RAID 5 or RAID 6 array. text/html 2026-04-06T17:57:00+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:make_vpop3_redownload_messages_from_isp?rev=1775498220&do=diff How to make VPOP3 re-download POP3 messages from the ISP If you have the VPOP3 Mail Collector setting Leave Mail On Server enabled, then VPOP3 will leave your messages on the ISP POP3 server for the specified number of days after downloading it. If, during this time, you want to make VPOP3 download those messages again, then you can do so. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:moving_messages?rev=1542192349&do=diff How to move messages between users There are several ways to do this, depending on your exact needs Via Administrator Console You can view a user's 'Inbox' messages by clicking on the message count on the Users list, then select the messages, choose the target user, and press the text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:obtaining_error_logs?rev=1542192349&do=diff How to Obtain Error Logs As part of diagnosing a support issue our support team may ask you to send them various log files. This page explains how to obtain the right files at the right time. How Logging Works Under its default settings VPOP3 logs a minimal amount of information about what it is doing to various files in the main VPOP3 directory. When investigating a support issue it is often the case that we will need you to switch on logging to extra files or increase the level of detail be… text/html 2025-09-11T13:48:07+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:recovering_messages_from_corrupted_database_into_fresh_database?rev=1757598487&do=diff Recovering messages from corrupted database into fresh database If the VPOP3 message database is corrupted, then one option is to build a fresh database and restore the settings into it, then recover the messages from the old database using the 'Message Restore' function in VPOP3. This has minimal downtime, but old messages will not all be available until the restore has completed. New messages will be available quickly, and you will be able to send messages. text/html 2024-01-15T11:35:45+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:repairing_corrupted_database?rev=1705318545&do=diff Repairing corrupted database With PostgreSQL (as with most high-end databases) the database system will automatically recover after power failures etc, if it can. If it can't then there is no manual 'repair' function, because the data cannot totally be recovered (or it would automatically have been recovered). text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:require_smtp_authentication?rev=1542192349&do=diff Require SMTP Authentication There are some situations where VPOP3 needs to know who is sending mail. This may be if you have VPOP3 configured to behave differently depending on who is sending messages - eg if you have different message size limits depending on the sender, or if you have message monitoring configured for certain users, or you don't want certain people to be able to send mail at all. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:seeing_where_a_message_came_from?rev=1542192349&do=diff Seeing where a message came from Sometimes you need to check to see where a message really came from. The 'From:' email address is easily forged, so that cannot be relied upon. The first thing you have to do is to get the full message headers. These may look daunting, but are very useful for problem diagnosis. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:sending_mail_from_different_email_addresses_or_domains?rev=1542192349&do=diff Sending mail from different email addresses or domains VPOP3 does not (by default) place any restrictions on which email addresses or domains you can send mail from. However, there may be external restrictions on which email addresses/domains you can send from. For instance, if you send mail through your ISP's mail server, they may only allow you to send mail from specific addresses, or the domain you send mail from may have a sender policy defined, such as text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:setting_up_vpop3_to_work_with_microsoft_exchange?rev=1542192349&do=diff Setting up VPOP3 to work with Microsoft Exchange * Exchange 2003 * Exchange 2007 * Using advanced VPOP3 features with Exchange (eg monitoring, etc) * Using VPOP3 Spam Filtering with Exchange * How to 'share' domains between Exchange and VPOP3 Note that the VPOP3 settings are identical whichever version of Exchange you are using (5.5, 2000, 2003, 2007, 2010 or any later version), but the relevant settings in Exchange may move or be renamed between versions. If you are using a differe… text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:smtp_rule_example_-_restrict_who_can_send_to_a_local_email_address?rev=1542192349&do=diff SMTP Rule Example - restrict who can send to a local email address If you have a local email address (a user, group or distribution list) and you want to restrict which email addresses can send messages to this address, you can use SMTP rules. There are a few ways you can configure the SMTP rules for this scenario. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:upgrade_vpop3?rev=1542192349&do=diff How To Upgrade VPOP3 Note: if you are upgrading to VPOP3 version 5 or later from version 4 or earlier, please see How To Upgrade VPOP3 to version 5 Upgrading VPOP3 is a straightforward process. Download VPOP3 from our web site and ideally back up your current installation just in case something goes wrong. Then simply run the installer that you downloaded and install it over the top of your existing VPOP3. All your settings and mail will be preserved. text/html 2020-09-03T15:07:34+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:upgrade_vpop3_to_version_8?rev=1599145654&do=diff Upgrading VPOP3 to version 8.x from v7 or earlier VPOP3 v8.x uses PostgreSQL 10 as its database engine, which is the latest supported 32 bit version of PostgreSQL. Later versions of PostgreSQL are 64-bit only, which means we cannot use them while continuing to support 32 bit versions of Windows. text/html 2026-03-18T20:49:54+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:upgrade_vpop3_to_version_9?rev=1773866994&do=diff Upgrading VPOP3 to version 9.x from v7 or v8 VPOP3 v9 and later requires a 64 bit version of Windows 8.1 or later VPOP3 v9.x uses PostgreSQL 18 as its database engine. This can only easily be upgraded from PostgreSQL 9.3 or later, which means it must be an upgrade of VPOP3 v7 or later. If you are using an earlier version of VPOP3, then upgrade it to v8.7 first, then upgrade to v9 or later text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:v3_-_move_message_store?rev=1542192349&do=diff How to move the VPOP3 Message Store to a new PC Use this option if you want to have VPOP3 running on one PC, but have the message store database on another PC. Manually Install PostgreSQL on the new PC Download the 'pgInstaller' version of PostgreSQL from the text/html 2019-11-12T16:10:42+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:v5_-_move_the_message_store_to_a_new_folder_drive?rev=1573575042&do=diff v5 - Move the message store to a new folder/drive Here is an alternative method, which may be simpler, but only moves the data, not the whole database store (which is a subtle difference) This guide assumes you want to just move the VPOP3 message store/database to a new folder on the same PC, and leave the VPOP3 installation directory where it is. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:vpop3_deleting_messages_as_old_messages?rev=1542192349&do=diff VPOP3 Deleting messages as 'old' messages If VPOP3 says 'deleting old message' in the status window activity log that means that it has seen the unique ID of that message before, longer ago than the time specified for VPOP3 to leave messages on the server, so it thinks that the message is an old message, and so deletes it. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:vpop3_is_using_a_lot_of_disk_space?rev=1542192349&do=diff VPOP3 is using a lot of disk space If VPOP3 is using a lot of disk space, the problem is usually that there is lots of data there, so it has to use the disk space. Message Storage In VPOP3 version 5 and later, all users' messages are stored in the database, so they will occupy space in the VPOP3\pgsql\data folder. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:vpop3_status_monitor_problems?rev=1542192349&do=diff VPOP3 Status Monitor Problems The VPOP3 Status Monitor is the program which shows the little (usually red) postbox icon in the Windows task tray. This usually launches automatically from the Windows startup group. This program is VPOP3Status.EXE on the disk, or can be run manually from text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:550_5.7.1_relaying_not_allowed_bad_sender_ip_address?rev=1542192349&do=diff 550 5.7.1 Relaying not allowed! Bad sender IP address This SMTP error message means that the computer which is sending the message is not permitted to send outgoing messages based on the VPOP3 SMTP Service's Access Restrictions. This is probably because someone is trying to send messages from outside your local network, and you have not configured VPOP3 to allow this. You have to be careful when allowing this, because you may configure VPOP3 to be an open-relay, which is a text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:550_5.7.1_unable_to_relay_for?rev=1542192349&do=diff 550 5.7.1 Unable to Relay for... When trying to send emails from your email client software you get an error in your email client 550 5.7.1 Unable to relay for ... This error is happening because you have installed the Microsoft IIS SMTP Service, and your email client is talking to that service rather than to VPOP3. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:10054?rev=1542192349&do=diff Socket Error 10054 - The virtual circuit was reset by the remote end Error 10054 means that the connection between VPOP3 and a remote computer (eg the ISP or another computer on your LAN) was disconnected by something outside of VPOP3. This is often caused by anti-virus software or Internet security/firewall on the VPOP3 machine but it could be any of a number of things. Any software or hardware that is sitting between VPOP3 and the ISP could be the root cause. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:allow_remote_access_to_vpop3_mailboxes?rev=1542192349&do=diff Allow Remote Access to VPOP3 Mailboxes Sometimes people want to be able to access their office VPOP3 mail server from a remote site or mobile phone etc. These instructions assume you have a permanent Internet connection (eg ADSL, Cable etc). If you don't have a permanent Internet connection, see text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:attachments_have_been_removed_or_renamed?rev=1542192349&do=diff Attachments have been removed or renamed If you have received an email and one or more of its attachments have been removed or renamed, it might be a result of Attachment Filtering. You can inspect the filtering rules by going to Administration Settings -> Settings -> text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:autoresponders_out_of_office?rev=1542192349&do=diff Autoresponders / Out of Office VPOP3 has an autoresponder facility for sending automatic replies when a message arrives in a mailbox. This is often used for 'Out of Office' replies, but it is not limited to that use. To set an autoresponder, the administrator can edit the user and go to the text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:c_error_popup?rev=1542192349&do=diff C++ Error Popup If VPOP3 crashes with a C++ error popup window, that means that an 'exception' has been thrown - something unusual has happened, and VPOP3 doesn't know how to recover automatically. Often these are due to database errors. There are two places you can look for the cause of the error: text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:calendar_on_ios?rev=1542192349&do=diff Configuring Calendar on iOS These instructions are for configuring a new Calendar account on iOS for iPhone, iPad and iPod Touch. The version of iOS used for these instructions is iOS v6.0, but they will probably work or help with other versions of iOS. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:calendars?rev=1542192349&do=diff Calendars To use the calendar facility in VPOP3 you need a CalDAV aware client. We have tested it with the free Mozilla Sunbird & Lightning products as well as the emClient email client. These products need a URL to be able to access the CalDAV data store. Once you have the URL (see below), copy it into the text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:calendars_on_em_client?rev=1542192349&do=diff Calendars on eM Client If you have used CalDAV calendars on Mozilla Lightning/Sunbird, then the eM Client configuration is quite different, but simple. To add a CalDAV account to eM Client * Go to Tools -> Accounts * Click New Account... * Open the text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:changing_a_user_s_password?rev=1542192349&do=diff Changing a user's password To change a user's password in VPOP3, you should log into the VPOP3 settings, go to the 'Users' page, then double-click on the user whose password you want to change. This will bring up a window giving you access to the user's settings. Go to the 'Passwords' tab where you can set the passwords. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:compatibility_with_spampal?rev=1542192349&do=diff Compatibility with SpamPal Some users have reported a problem installing/running the PostgreSQL component when the 'SpamPal SMTP Transparent Feature' is enabled. Disabling this feature has resolved the problem for these users. Unfortunately we don't have further information on this, as we don't use SpamPal ourselves, but the above information may be useful if you have this problem. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:copy_outgoing_mail?rev=1542192349&do=diff Copy Outgoing mail Sometimes people need to copy outgoing mail for various reasons. There are several ways of doing this in VPOP3 depending on your exact requirements: * Message Monitoring - this copies all outgoing, incoming and/or internal mail sent by/to specific users to another specific user text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:creating_extra_smtp_services?rev=1542192349&do=diff Creating Extra SMTP Services In VPOP3 Enterprise (not VPOP3 Basic) you can create multiple SMTP services. This can be useful if you want VPOP3 to listen on different ports and/or have different settings. There are two ways of doing this. Have a single SMTP service listening on multiple ports or IP addresses text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:data_stream_contained_nul_character?rev=1542192349&do=diff Data stream contained NUL character Description of the problem NUL characters (bytes with value 0) are not allowed in email messages and should not be transmitted over POP3, SMTP or IMAP4 except in certain circumstances. If an attachment contains such a byte it must be encoded using text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:database_disk_caching?rev=1542192349&do=diff Database & Disk Caching Disk Caching One key point is that, like all other high-end databases, PostgreSQL should not be run on a server with disk level write back caching. With write back caching, the disk will report data as being written to disk when it is still in the disk's cache memory. If the power then fails, this data is lost and can cause database corruption. As long as the database server really knows when the data has been written to disk, power failure will not cause database corru… text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:delete_a_user?rev=1542192349&do=diff How to Delete a User To delete a user from VPOP3, go to Users -> Accounts, select the user you wish to delete, and press the Delete button. Deleting an administrator You cannot delete the user as whom you are currently logged into the VPOP3 settings (e.g. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:delete_outqueue_messages_directly_from_the_database?rev=1542192349&do=diff Delete OutQueue messages directly from the database If there is an extremely large number of messages (eg hundreds of thousands) in the VPOP3 OutQueue, then it may take a very long time for VPOP3 v5 and later to start as it check the message database tables for consistency during initialisation. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:emptying_a_user_s_mailbox?rev=1542192349&do=diff Emptying a user's mailbox To empty a user's 'Inbox' folder, go to the VPOP3 settings. Then click on the Users tab at the top to go to the user list. In the user's list there will be a column displaying the number of messages in the user's Inbox folder. Just to the right of that will be an icon of a waste bin. If you click on that, you will delete all the messages in the user's Inbox folder. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:err_can_t_open_the_message_file_-_it_s_gone?rev=1542192349&do=diff -ERR Can't open the message file - it's gone! If VPOP3 receives the error message “-ERR Can't open the message file - it's gone!” from your ISP's POP3 server when it is downloading messages, this is a symptom of a fundamental bug in your ISP's POP3 server. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:error_message_after_sending_rcptto_-_error_0_-_text_550_5.7.1_relaying_not_allowed_bad_sender_ip_address?rev=1542192349&do=diff Error message after sending RCPTTO: - error 0 - text 550 5.7.1 Relaying not allowed! Bad sender IP address If you get this error message from within Webmail, then it usually means that the SMTP service access restrictions are blocking Webmail from sending mail. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:error_message_handling?rev=1542192349&do=diff Error Message Handling VPOP3 will normally send an error message to the Main Administrator every time it encounters an error. We recommend you leave it like this in most cases - if an error message occurs repeatedly, then it usually means there's an underlying problem which needs resolving rather than ignoring. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:exchange_2003?rev=1542192349&do=diff Setting up VPOP3 to work with Exchange 2003 The instructions below are for Exchange Server 2003. For other versions of Exchange see here. You can link VPOP3 to Exchange Server, so that Exchange Server sends outgoing mail through VPOP3 and VPOP3 sends any incoming mail directly to Exchange Server. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:exchange_2007?rev=1542192349&do=diff Exchange 2007 You can link VPOP3 to Exchange Server, so that Exchange Server sends outgoing mail through VPOP3 and VPOP3 sends any incoming mail directly to Exchange Server. You should first of all set up VPOP3 to send and receive Internet email as normal. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:fax_global_address_book?rev=1542192349&do=diff Fax Printer Driver Address Book The VPOP3 Fax Printer Driver obtains address book details using LDAP. So, you must make sure that the VPOP3 LDAP service is enabled, and that the Fax Printer Driver has the correct VPOP3 address, and the same TCP/IP port defined to access the LDAP service as VPOP3 is using. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:french_webmail_language_file?rev=1542192349&do=diff French Webmail Language File Copy/paste the text below to a file 'french.lng' or 'francais.lng' in the VPOP3 directory. (French users, feel free to update/correct the text below) #login page logintitle=VPOP3 Login webadminlogin=web admin login webmaillogin=web mail login enterusername=You must specify your VPOP3 username here bookmarksnotsupported=I'm sorry, but your web browser does not support this function. You will have to add this page to your bookmarks manually. loginfailed=Login Faile… text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:general_configuration_tasks?rev=1542192349&do=diff Initial Configuration Tasks After installing VPOP3, you will need to get into the VPOP3 settings. The easiest way of doing this is to find the VPOP3 Status Monitor in the Windows task tray. Right-click this icon, and choose 'VPOP3 Settings'. (If that doesn't work, see this article to troubleshoot Status Monitor problems). Alternatively, on the VPOP3 PC, you can go to Start text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:german_webmail_language_file?rev=1542192349&do=diff German Webmail Language Page Copy/paste the text below to a file 'german.lng' in the VPOP3 directory. (German users, feel free to update/correct the text below) #login page logintitle=VPOP3 Login webadminlogin=web admin login webmaillogin=Webmail Anmeldung enterusername=Sie m&uuml;ssen einen Benutzernamen angeben bookmarksnotsupported=I'm sorry, but your web browser does not support this function. You will have to add this page to your bookmarks manually. loginfailed=Anmeldung fehlgeschlagen … text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:ghost_folders?rev=1542192349&do=diff IMAP4 'Ghost Folders' Sometimes your IMAP4 email client may show folders in the folder tree, but when you select them, you get an error that the folder does not exist. This happens because IMAP4 has the concept of being able to 'subscribe' to folders - this means that you can hide folders by unsubscribing from them. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:handling_mail_for_multiple_incoming_domains?rev=1542192349&do=diff Handling mail for multiple incoming domains VPOP3 can easily handle mail for several incoming domains. Exactly how you do it depends on the exact situation. All domains are 'aliases' If the domains are aliases of each other, for instance, you have 'mycompany.com' and 'mycompany.org', both of which are the same, so each address at mycompany.com also exists at mycompany.org, and the emails go to the same people regardless of which domain is used, then you simply configure the domains in the ma… text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:initial_user?rev=1542192349&do=diff Initial User When you install VPOP3 it will ask you to create an initial user. This counts towards your user count and is created as your initial administrator account. More administrator accounts can be created later if you wish, and you can remove the initial user if you wish. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:installation_errors?rev=1542192349&do=diff Installation Errors This page lists some errors which may occur during installation and the solution. In general, do NOT 'ignore' any errors unless we tell you to. If you have to retry an installation, when it is an upgrade from versions 1 - 4 going to version 5 or later, then make sure you have told the installer to install the database. Sometimes a partial installation will make the installer think that the database is already installed. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:invalid_helo_name?rev=1542192349&do=diff SMTP error 'Invalid HELO name' When sending mail you may get an error from the remote SMTP server saying something like 'Invalid HELO name' This happens if the host name configured in VPOP3 does not look like a valid Internet host name (e.g. 'mail.domain.com'). Some SMTP servers don't bother checking this value because it has no authentication value at all, but a few do check that it looks correct. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:iphone?rev=1542192349&do=diff Setting up an iPhone/iPad/iPod Touch To set up an iPhone to access VPOP3's mail, you first of all need to configure VPOP3 to allow access by remote users (unless you will only be using the iPhone in the office, connected via WiFi to the office LAN). Adding the mail account to your iPhone/iPad text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:localhost_missing_from_vista_hosts_file?rev=1542192349&do=diff Localhost missing from Vista HOSTS file The PostgreSQL database server needs to be able to resolve the 'localhost' name for it to run. On some Windows Vista installations, the HOSTS file seems to be missing the localhost entry (usually it is there, but it seems to be a common problem for it not to be there). text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:non-administrator?rev=1542192349&do=diff Trying to perform administrative tasks without rights This problem can have two symptoms: * When trying to access the VPOP3 settings you get an error “You are trying to perform an VPOP3 administration task while logged in as a non-administrator text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:obtaining_message_headers?rev=1542192349&do=diff How to Obtain Message Headers Most people are familiar with mail headers such as From:, To:, Subject: etc. but there are many more which most people never see. Quite often we need to see the full internet mail headers from an e-mail that is causing problems. This article explains how to get hold of them in some of the more common e-mail clients. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:outlook_2007?rev=1542192349&do=diff How to configure Outlook 2007 Email SMTP Authentication To set up SMTP authentication in Outlook 2007, if your VPOP3 requires it, go to Tools -> Account Settings, select your email account and press Change.... Then, press the More Settings... button text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:outlook_2010?rev=1542192349&do=diff How to configure Outlook 2010 In many ways, configuring Outlook 2010 is a similar to configuring Outlook 2007. The biggest difference you are likely to notice is the new “Ribbon” interface, in place of the traditional menu bar (File, Edit, View, etc.) Email text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:outlook_outlook_express_are_sending_mail_repeatedly?rev=1542192349&do=diff Outlook / Outlook Express is sending mail repeatedly If you are using Outlook or Outlook Express you may occasionally find that mail is being sent repeatedly. There are a couple of possible reasons for this which we know of Sending taking too long text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:pop3_client_problem?rev=1542192349&do=diff VPOP3 - POP3 Client Problem These errors occur whilst VPOP3 is communicating with your ISP's POP3 mail server to retrieve your mail. The server connection was closed unexpectedly If the message text is Error with Pop3 Client (XXXX (YY)) The server connection was closed unexpectedly text/html 2019-02-06T17:10:31+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:postgresql_replication?rev=1549473031&do=diff PostgreSQL Replication PostgreSQL 9.1 (used in VPOP3 5 and later) supports replication from a 'Master' to a 'Slave' database server. This can be used with VPOP3 for having a near-realtime backup of your settings & messages. To use the replication, you need to have a file share which is accessible from both PCs. The thing to watch out for is that the PostgreSQL services may be running as a different user from the currently logged in user, so make sure that the user(s) which the PostgreSQL servi… text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:postgresql_server_won_t_start_due_to_damaged_log_files?rev=1542192349&do=diff PostgreSQL server won't start due to damaged log files If the PostgreSQL server won't start at all, because its transaction logs are damaged, you will probably need to recreate the database store totally. To rebuild the database: * Open a command prompt and find the VPOP\pgsql folder text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:redirect_message_for_a_user_if_the_sender_is_a_particular_email_address?rev=1542192349&do=diff Redirect message for a user if a sender is a particular email address Say you want messages addressed to 'user1' to be redirected to 'user2' if they came from customer@domain.com This is an unusual requirement, so there is no way to do it in VPOP3. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:remove_messages_from_the_outbound_queue?rev=1542192349&do=diff How to remove messages from the outbound queue To delete messages from the VPOP3 'OutQueue': * log into the VPOP3 settings * go to the Users page * click on the OutQueue entry in the accounts list. This will show you a list of all the messages waiting to be sent by VPOP3 text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:sender_policy_framework?rev=1542192349&do=diff Sender Policy Framework / SPF SPF is a system used to tell mail servers which IP addresses can send mail from which domains. It is designed to reduce 'spoofing' of email addresses. For instance, if you receive an email message from your bank, your mail software can check that it came from an IP address authorised to send mail from your bank, and treat the message with suspicion if it didn't come from an authorised IP address. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:sending_mail_through_your_gmail_account?rev=1542192349&do=diff Sending mail through your Gmail account According to Google, the settings for sending mail through Gmail are: Outgoing Mail (SMTP) Server - requires TLS or SSL: smtp.gmail.com (use authentication) Use Authentication: Yes Port for TLS/STARTTLS: 587 Port for SSL: 465 text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:set_as_administrator?rev=1542192349&do=diff How to Set a User as Administrator VPOP3 has two 'types' of administrator. * Users who can administer VPOP3, and log in and change settings etc. These are normal users, but have the Administrator box checked on the User -> General settings for that user. These user have a red key icon in the users list. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:setup_steps_for_multiple_pop3_accounts_at_the_isp?rev=1542192349&do=diff Setup steps for multiple POP3 accounts at the ISP * Set up all the local users you need in the 'Users' page in the VPOP3 settings. The usernames & passwords do not have to have any relation to the ISP's accounts. These are the details which the users will put in their email clients (eg Outlook) to collect their mail from VPOP3. text/html 2020-07-22T10:32:40+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:signing_outgoing_mail_with_dkim?rev=1595413960&do=diff Signing outgoing mail with DKIM DKIM, also known as DomainKeys Identified Mail, is a form of email authentication that digitally signs emails to prove that they were sent from authorized domains and aren't fake emails. Companies like Google and Yahoo use DKIM to sign their emails and it is becoming ever more popular. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:some_client_pcs_cannot_access_vpop3?rev=1542192349&do=diff Some PCs cannot access VPOP3 when VPOP3 is connected to the Internet This error happens when you have multiple TCP/IP subnets on your network. The computers which are on different subnets from the VPOP3 computer will not be able to see VPOP3 whilst VPOP3 is connected to the Internet (through a dial-up connection). Whenever VPOP3 is offline, it will work correctly. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:training_the_spam_filter?rev=1542192349&do=diff Training the VPOP3 Spam Filter The VPOP3 spam filter has a couple of mechanisms which can be used to 'train' it to distinguish between spam and not-spam. Bayesian Filter The Bayesian filter this looks at words in messages sent and received and their probabilities of being contained in spam and not-spam, and works out an overall probability of the message being spam or not-spam based on the combination of those probabilities. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:transmission_receipt?rev=1542192349&do=diff Transmission Receipt Message This is not an error message, but we are listing it here because it confuses some people. VPOP3 sends a 'Transmission Receipt' when a message is sent out, and it contains a header asking for the receipt. The default configuration is that it will send the transmission receipt if the sender asks for a read receipt. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:upgrading_database_software?rev=1542192349&do=diff Upgrading PostgreSQL Database Software To upgrade the PostgreSQL database software used by VPOP3 * stop VPOP3 * backup the database (<http://wiki.pscs.co.uk/how_to;backup_vpop3#manual_database_backup1>) * uninstall PostgreSQL (from within Windows) if necessary * rename the VPOP3\pgsql folder to something else text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:use_download_rules_for_incoming_pop3_filtering?rev=1542192349&do=diff Use Download Rules for incoming POP3 message filtering If you have VPOP3 retrieving messages from a POP3 account on an ISP, then you can use Download Rules to do basic filtering on incoming messages. (If you have incoming SMTP, then use SMTP Rules instead) Download rules cannot perform all mail filtering tasks. For more features, text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:using_advanced_vpop3_features_with_lan_forwarding?rev=1542192349&do=diff Using VPOP3 Advanced Features with LAN Forwarding If you are wanting to use any of VPOP3's advanced features (such as mailing lists, message monitoring, wildcard aliases etc) because you are LAN forwarding to a less capable server, then you will usually need to have VPOP3 do all its normal message routing functions initially, then, as the final stage have it forward the messages on to the other server. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:using_vpop3_spam_filtering_with_lan_forwarding?rev=1542192349&do=diff Using VPOP3 Spam Filtering with LAN Forwarding When using the VPOP3 Spam filter with LAN forwarding you need to be aware a bit of how it works. The spam filter will only quarantine messages which are going to a VPOP3 user. This is because that user needs to be able to log into VPOP3 to be able to view their quarantined messages. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:using_vpop3_with_microsoft_exchange?rev=1542192349&do=diff Using VPOP3 with Microsoft Exchange Server You can link VPOP3 to Exchange Server, so that Exchange Server sends outgoing mail through VPOP3 and VPOP3 sends any incoming mail directly to Exchange Server. You should first of all set up VPOP3 to send and receive Internet email as described in the online help. text/html 2018-12-05T15:25:24+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:v3_-_move_message_store_folder?rev=1544023524&do=diff v3/4 - Move the message store to a new folder/drive This guide assumes you want to just move the VPOP3 message store/database to a new folder on the same PC, and leave the VPOP3 installation directory where it is. * Stop VPOP3 * Stop PostgreSQL text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:vpop3_2.x_crashes_when_user_tries_to_download_mail?rev=1542192349&do=diff VPOP3 2.x crashes when user tries to download mail If VPOP3 2.x crashes when a user tries to download mail, there are a few possible causes we know of: * A virus scanner or Internet security software is interfering with the connection between VPOP3 and the email client and is either terminating VPOP3 deliberately, or is blocking VPOP3 causing another part of it to crash text/html 2026-01-05T09:31:47+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:vpop3_re-downloading_old_messages_from_isp_pop3_server?rev=1767605507&do=diff VPOP3 re-downloading old messages from the ISP POP3 server If you tell VPOP3's POP3 mail collector to leave messages on the ISP's server for a few days, you may find that sometimes VPOP3 will redownload all the messages from the ISP mailbox again. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:vpop3db_service_doesn_t_exist?rev=1542192349&do=diff VPOP3DB Service doesn't exist If VPOP3 v3 or later won't start, and you find that the VPOP3DB (or PostgreSQL-VPOP3) service does not exist in the Windows Services list, it may be that you have just moved VPOP3 and made a mistake following the move procedure or something has removed the service for some reason. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:what_is_the_best_practice_to_delete_old_messages_from_the_vpop3_archive_folder?rev=1542192349&do=diff What is the best practice to delete old messages from the VPOP3 archive folder? You should use the 'Offline' tab in the VPOP3 Message Archive settings to tell VPOP3 to move old messages into a ZIP file. You can then store this ZIP file somewhere safe in case you need to refer to it in the future. (If you know you won't want to ever refer to these old messages, you could just delete the ZIP file, but storage costs nowadays are so cheap, we'd recommend keeping it, just in case). text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:when_sending_mail_vpop3_adds_prvs_.._to_the_sender_address?rev=1542192349&do=diff When sending mail, VPOP3 adds 'PRVS=...' to the sender address This is because VPOP3 version 5 and later support BATV. BATV helps to eliminate 'backscatter spam', where someone else sends spam pretending to be from you, and then you receive all the bounce messages from those messages. BATV encodes the sender address in a special way so that VPOP3 can detect that a bounce message is in response to a message that you actually sent.