PSCS Wiki

Address Book tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Address Book tab The Address Book tab within VPOP3 webmail enables you to manage your lists of contacts and add those contacts into a new or existing message. Substantial alterations to the interface were introduced in version 5. Both interfaces are documented.

Settings -> Diagnostics

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Settings -> Diagnostics The Diagnostics page allows you to enable, configure and disable various methods of diagnostic logging, within VPOP3. Log file overview By default, VPOP3 will keep two copies of most log files: * The current log file, with a

Spam Filter Rules: IfMatch

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spam Filter Rules: IfMatch Statement IfMatch Version 2.1.7+ Purpose Allows you to perform a regular or substring match on a variable or part of the message being processed IfMatch statements require a data parameter and a search value, in the format

Settings -> Attachment Processing

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Settings -> Attachment Processing The Attachment Processing page allows you to configure VPOP3 to perform two distinct functions on messages that contain attachments: * * Filtering The Filtering tab is divided into four main sections: Attachment Filtering

Webmail Tabs

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Webmail Tabs From version 4 onwards, VPOP3 webmail has a tabbed structure, which enables you to move between various screens with minimal effort. By using tabs, the entire webmail can be loaded in one go - so there is no need to waste time and bandwidth by downloading the same key components each time you switch between the various parts of the webmail.

How To Setup VPOP3 Service Security

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How To Setup VPOP3 Service Security VPOP3 can be configured to restrict access to its various services depending on the client computer's IP address. This is useful if you want to allow access from only certain IP addresses (eg within your LAN) and prevent access from other IP addresses (eg the Internet).

Settings -> Local Mail -> General

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Settings -> Local Mail -> General The Local Mail -> General page allows you to configure a few simple, but fundamentally important settings. Default Domain In the majority† of cases, this is the domain name that VPOP3 will use when sending automated messages; for instance, users may receive a message from

Encryption

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Encryption There are several different encryption methods used on the Internet which are relevant to VPOP3. Current versions of VPOP3 Basic will be able to connect to other POP3 or SMTP servers using either SSL or TLS. This allows you to use VPOP3 to access services such as GMail which require SSL/TLS.

Support Remote Access facility

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Support Remote Access facility If you use a paid technical support option we have the facility to remotely access your VPOP3 server if you wish. This allows us to help you resolve issues or assist with configuration or installation issues. You can either allow us to just view your screen and tell you what to do, or you can allow us to control your computer as well.

Settings -> Admin Settings

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Settings -> Admin Settings The Admin Settings page allows you to perform three key functions: * * * Choosing a Main Administrator The Main Administrator receives notification emails, such as daily reports and errors/problems which may require manual intervention.

Autoresponder Global Scripting

Anonymous (anonymous@undisclosed.example.com) — 2026-03-23T15:29:29+00:00

Autoresponder Global Scripting For scripting to modify the autoresponder text which is embedded in the autoresponder itself, see Autoresponder Scripting The Autoresponder Global Script is executed for every autoresponse. It is stored in the 'Autoresponder.lua' script in Settings → Scripts

Import Users From File

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Import Users From File VPOP3 supports the importation and exportation of users, via a CSV file (see for a specification of the CSV file format). NOTE: This process is not designed to provide a complete backup of user data, nor is it intended to facilitate moving VPOP3 to a new computer. Instead, see the following relevant pages:

LAN Forwarding Scripting

Anonymous (anonymous@undisclosed.example.com) — 2025-08-20T16:08:40+00:00

LAN Forwarding Scripting (Added in V8.7) This is stored in the 'LanForwarding.lua' script in Settings -> Scripts Pre-send These functions are called before the message is placed in the LAN Forwarding queue There are two global variables set: *

What's new in version 5 webmail?

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

What's new in version 5 webmail? This is a list of some of the most noticeable changes to VPOP3's webmail interface for version 5. For a more detailed list of changes, view our bugtracker. [VPOP3 Version 5 - mobile compatible webmail] Mobile compatible webmail If you access version 5 webmail from a mobile device, you will probably be redirected to the mobile compatible version. It is a cut-down version of Webmail, which retains the key features, but doesn't utilise the extra features which w…

GDPR for VPOP3 self-hosted software

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

GDPR for VPOP3 self-hosted software VPOP3 is an email server program, it is not a service, so if you use VPOP3 on your own computer we are not a “data controller” or a “data processor” under GDPR rules as we never see any of your data (unless you give us permission to remotely connect to your PC for technical support purposes).

I got a copy of VPOP3 via TrialPay and would like a refund

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

I got a copy of VPOP3 via TrialPay and would like a refund If you obtained a VPOP3 Home User licence via and are unhappy with it, you will need to get in touch with TrialPay directly. Our licence is given as a complimentary offer after you have purchased through them, and they have notified us with your details.

What are the limitations of the Home User licence

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

What are the limitations of the Home User licence The VPOP3 Home User licence allows you to have up to 5 users for a lower price than the standard 5 user licence, but there are some restrictions in functionality. These are described below: * There is no Mailing List Server (you can still have distribution lists)

What is Webmail?

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

What is Webmail? “Webmail” is a term used to describe an email client which is accessed through a web page rather than as a standalone program. Some well known services which offer webmail are services such as Hotmail, Yahoo, Gmail etc. All versions of VPOP3 have a Webmail service included as standard.

550 5.7.1 Relaying not allowed! Bad sender IP address

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

550 5.7.1 Relaying not allowed! Bad sender IP address This SMTP error message means that the computer which is sending the message is not permitted to send outgoing messages based on the VPOP3 SMTP Service's Access Restrictions. This is probably because someone is trying to send messages from outside your local network, and you have not configured VPOP3 to allow this. You have to be careful when allowing this, because you may configure VPOP3 to be an open-relay, which is a

Socket Error 10503 - No More Data

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Socket Error 10503 - No More Data Error 10503 means that the connection between VPOP3 and a remote computer (normally your ISP) was dropped at an unexpected time. This is different from the error 10054 in that this is a controlled line drop. One way this can happen is if the ISP's POP3 server uses an obsolete standard which allows it to drop the connection if a POP3 'LIST' command is performed on an empty mailbox. The current standard requires that the connection is not dropped until the clien…

Changing a user's password

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Changing a user's password To change a user's password in VPOP3, you should log into the VPOP3 settings, go to the 'Users' page, then double-click on the user whose password you want to change. This will bring up a window giving you access to the user's settings. Go to the 'Passwords' tab where you can set the passwords.

How to send a fax by email using the VPOP3 FaxServer

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to send a fax by email using the VPOP3 FaxServer VPOP3 2.1.0 and later together with the VPOP3 FaxServer software allows you to send specially crafted emails to VPOP3 to have them sent as faxes. To do this, send an email to fax@ . The email subject will be the subject of the fax used on the fax cover page. The email should be in plain text (not

How To Encrypt Sessions

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How To Encrypt Sessions VPOP3 Enterprise 2.6 and later supports SSL/STARTTLS encrypted sessions to VPOP3 itself. So, the email client or web browser will encrypt the data passed to VPOP3 so it cannot be intercepted. This requires an SSL Certificate to be created for VPOP3.

Full Text Search

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Full Text Search In VPOP3 Enterprise v7.0 a facility for full-text-search on message content was added. Because the full-text-search indexes can be quite big, this facility is optional. For several reasons, the full-text-search is stored in a separate PostgreSQL database. This means that it is not backed up with your standard backups. After a restore, the full-text-search index can be rebuilt from the raw message content.

How to move messages between users

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to move messages between users There are several ways to do this, depending on your exact needs Via Administrator Console You can view a user's 'Inbox' messages by clicking on the message count on the Users list, then select the messages, choose the target user, and press the

Require SMTP Authentication

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Require SMTP Authentication There are some situations where VPOP3 needs to know who is sending mail. This may be if you have VPOP3 configured to behave differently depending on who is sending messages - eg if you have different message size limits depending on the sender, or if you have message monitoring configured for certain users, or you don't want certain people to be able to send mail at all.

Restricting the number of recipients sent to

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Restricting the number of recipients sent to Some ISPs set restrictions on the number of recipients that you are allowed to send in a certain time period, eg 50 messages per hour, or the number of recipients that you are allowed to send per message or per connection.

Timeout problems downloading/uploading messages with attachments

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Timeout problems downloading/uploading messages with attachments There are various possible reasons for this, usually to do with third party internet security software but they may also be associated with Windows TCP/IP or dial-up adapter issues. You may not have problems with other software, but that doesn't mean the problem is being caused by VPOP3.

When sending mail, VPOP3 adds 'PRVS=...' to the sender address

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

When sending mail, VPOP3 adds 'PRVS=...' to the sender address This is because VPOP3 version 5 and later support BATV. BATV helps to eliminate 'backscatter spam', where someone else sends spam pretending to be from you, and then you receive all the bounce messages from those messages. BATV encodes the sender address in a special way so that VPOP3 can detect that a bounce message is in response to a message that you actually sent.

Connections

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Connections In VPOP3 a Connection tells VPOP3 how to 'connect' to the Internet. VPOP3 supports up to 10 Connections, which can be either network connections or Dial-Up connections (using a modem) A Connection is linked to one Mail Sender and zero or more Mail Collectors.

Error Handling Scripting

Anonymous (anonymous@undisclosed.example.com) — 2023-11-20T10:18:01+00:00

Error Handling Scripting For most error messages that VPOP3 generates, it allows control of error messages, eg to limit the frequency of error messages if they would be generated repeatedly. These limits are set in Settings -> Admin Settings -> Message Control. However, if you want more granular control, you can use Lua scripting for more fine-grained control

Settings -> Global Address Book

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Settings -> Global Address Book The VPOP3 global address book allows users to access a shared address book from any email client which supports the 'LDAP' protocol (most modern email clients do, but they may call it 'directory service' Importing Entries

Logging

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Logging Activity Summary Reports You can tell VPOP3 to send you a daily summary report each day. To do this check the box to say Send daily summary logs to, and choose the appropriate user (or “Main Administrator” if you want the reports to be sent to the

SMTP Server Lua Scripting

Anonymous (anonymous@undisclosed.example.com) — 2025-05-08T08:23:35+00:00

SMTP Server Lua Scripting The SMTP Server Lua Script is called SMTPSVR.LUA and can be edited from the Settings -> Scripts page in the VPOP3 settings. This script is called whenever an instance of the VPOP3 SMTP server is launched - ie whenever someone opens a connection to port 25 on the VPOP3 server to send it a message, whether from a local user or an incoming SMTP message.

Mappings

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Mappings In VPOP3, Mappings are a way of explicitly linking an email address to a user or list. They can also be used to indicate that an email address is remote, even though it would otherwise appear to be a local email address. In other email servers, a similar feature may be called 'aliases'

Misc -> DNS Tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Misc -> DNS Tab Settings -> Misc Settings -> DNS The DNS tab lets you specify which DNS servers VPOP3 will use. DNS (Domain Name System) is a system which converts Internet host names (eg www.google.com) into a numeric IP address (eg 1.2.3.4), because all connections on the Internet are actually performed using numeric IP addresses, but it is easier for people to remember names.

Quarantine tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Quarantine tab The Quarantine tab within VPOP3 webmail is where you view and manage messages that have been quarantined by VPOP3's spam filter. As you can see from the screenshot, unlike many of the other webmail tabs, it is not divided into multiple sections:

Send Admin Message

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Send Admin Message It is possible for administrator users to send a bulk email message to an entire group or list. To begin composing an email, go to the Administration Settings -> Users page, and click Send Admin Message. This should then open a window, which allows you to specify various options.

Use the spam filter scripting to add fixed text to the subject on incoming messages

Anonymous (anonymous@undisclosed.example.com) — 2021-12-13T15:20:04+00:00

Use the spam filter scripting to add fixed text to the subject on incoming messages This needs VPOP3 version 5 or later. This script allows you to add fixed text to the subject an incoming message, eg so that users can see that a message is an incoming rather than local message (be aware of weaknesses in this strategy - eg forwarded messages, spoofing of the marker, breaking DKIM message signatures, etc)

Allow messages through from a specific IP address

Anonymous (anonymous@undisclosed.example.com) — 2022-01-25T11:59:27+00:00

Allow messages through from a specific IP address This script allows messages through the spam filter if they arrive at VPOP3 from a specific SMTP sender (only when the message is sent directly to VPOP3 using SMTP, not via another server). Add the following to the spamrules_userlocal.txt file. This script file gets processed on all messages.

Spam Filter Rules: AddHeader

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spam Filter Rules: AddHeader Statement AddHeader Version 2.1.7+ Purpose Allows you to add, replace or remove the specified header line in the message headers The AddHeader statement requires the full header line in one continuous string, in the format

Spam Filter Rules: BulkScan

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spam Filter Rules: BulkScan Statement BulkScan Version 2.1.7+ Purpose Allows you to specify lots of search strings in one section without needing the verbose If statement The BulkScan statement requires a variable name and a limitless number of search specifiers, in the format

Spam Filter Rules: Convert

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spam Filter Rules: Convert Statement Convert Version 2.4.9+ Purpose Allows you to convert data from one form to another The Convert statement requires a data parameter, conversion method and variable name, in the format Convert

Spam Filter Rules: DefineRule

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spam Filter Rules: DefineRule Statement DefineRule Version 2.1.9+ Purpose Defines a rule name, default weighting and description. See Rule names and weights The DefineRule statement requires a name, default weight and description, in the format DefineRule "" ""

Spam Filter Rules: DefineSetting

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spam Filter Rules: DefineSetting Statement DefineSetting Version 2.1.9+ Purpose Defines a generic setting, the default value and description The DefineSetting statement requires a name, default value and description, in the format DefineSetting "" ""

Spam Filter Rules: DNS

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spam Filter Rules: DNS Statement DNS Version 2.1.11+ Purpose Allows the script to perform an arbitrary DNS lookup, returning the result into a specified variable The DNS statement requires a type, hostname and variable name, in the format DNS

Spam Filter Rules: DNSBL

Anonymous (anonymous@undisclosed.example.com) — 2020-10-23T16:07:49+00:00

Spam Filter Rules: DNSBL Statement DNSBL Version 2.1.7+ Purpose Allows the script to perform a DNS blacklist lookup, returning the result into a specified variable The DNSBL statement requires a hostname, DNSBL zone and variable name, in the format

Spam Filter Rules: GetDecodedSection

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spam Filter Rules: GetDecodedSection Statement GetDecodedSection Version 2.1.11+ Purpose Returns a specified MIME section of a message into a variable, after processing any Base64 or Quoted-Printable encoding of the raw message data The GetDecodedSection

Spam Filter Rules: IfLocalAddress

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spam Filter Rules: IfLocalAddress Statement IfLocalAddress Version 2.2.1+ Purpose Allows you to check if a specified email address is local to your VPOP3 installation IfLocalAddress requires just one paramater; the address, in the format IfLocalAddress

Spam Filter Rules: Log

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spam Filter Rules: Log Statement Log Version 2.1.11+ Purpose Allows you to write entries to the spamrules log file The Log statement lets you write a custom entry to the SPAMRULES.LOG file. This can be useful for debugging scripts. Example Log "Sender = ${MailFrom}"

Spam Filter Rules: SendMessage

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spam Filter Rules: SendMessage Statement SendMessage Version 2.4.5+ Purpose Allows you to send a message The SendMessage statement requires a recipient, subject, message text and a currently unused options parameter, in the format SendMessage

Spam Filter Rules: *IFSUPPORT

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spam Filter Rules: *IFSUPPORT Statement *IFSUPPORT Version 2.2.5+ Purpose Allows the script to determine whether a particular command or function is supported by the installed version of VPOP3 The *IFSUPPORT statement requires a command or a function, in the format

Spam Filter Rules: SURBL

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spam Filter Rules: SURBL Statement SURBL Version 2.1.7+ Purpose Allows a SURBL lookup on the specified hostname or IP address in the specified SURBL zone, and returns the result into the specified variable The SURBL statement requires a hostname, SURBL zone and variable name, in the format

Spam Filter Rules: Variables

Anonymous (anonymous@undisclosed.example.com) — 2023-08-14T16:01:01+00:00

Spam Filter Rules: Variables The VPOP3 spam filter script language supports simple variables. In most places these are specified as ${}, but in some places they are just specified as - for instance where a statement always puts its result into a variable.

VPOP3 Status Monitor

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

VPOP3 Status Monitor The VPOP3 status monitor allows users to see what VPOP3 is doing, and also, optionally, to send/receive simple 'instant messages' between local users. Different users can have different permissions for the status monitor. They can be set for all administrators or non-administrators on

Message Rules

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Message Rules The Edit User -> Message Rules tab can be used to create/edit rules which are processed when messages arrive in a User's mailbox. They can be used to copy messages, mark them as read, delete them, etc VPOP3 will process Message Rules in the order they appear in the list. If you want to change the order of the rules, you can drag & drop them into the correct order. Usually when VPOP3 has processed a rule, it will go on to check further rules, but you can use the

Webmail Menu bar

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Webmail Menu bar The Webmail Menu bar within VPOP3 webmail enables you to quickly perform relevant actions. The Menu has six main headings; of which, three have multiple options. Option Active Function V Notes Message Mail and View Message tabs Opens/closes Message menu

What is IMAP4

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

What is IMAP4 IMAP4 (Internet Mail Access Protocol V4) is a new mail retrieval protocol which can be used as an alternative to the POP3 (Post Office Protocol V3). The main difference between IMAP4 and POP3 is that with POP3 the messages are only stored temporarily on the mail server until they are downloaded to the email client where the messages are stored, manipulated, searched etc. With IMAP4 the messages are stored permanently on the server, and they are manipulated, searched etc on the ma…