PSCS Wiki

SMTP Server Lua Scripting

Anonymous (anonymous@undisclosed.example.com) — 2025-05-08T08:23:35+00:00

SMTP Server Lua Scripting The SMTP Server Lua Script is called SMTPSVR.LUA and can be edited from the Settings -> Scripts page in the VPOP3 settings. This script is called whenever an instance of the VPOP3 SMTP server is launched - ie whenever someone opens a connection to port 25 on the VPOP3 server to send it a message, whether from a local user or an incoming SMTP message.

We installed a new router and now nothing works

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

We installed a new router and now nothing works If you installed a new router on your network and left it at the default settings, you may find that VPOP3 doesn't seem to work afterwards. This is because it may be that the new router allocates new IP addresses on your network.

Address Book tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Address Book tab The Address Book tab within VPOP3 webmail enables you to manage your lists of contacts and add those contacts into a new or existing message. Substantial alterations to the interface were introduced in version 5. Both interfaces are documented.

SMTP Server -> IDS/IPS

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTP Server -> IDS/IPS The IDS/IPS tab lets you set logging and automatic blocking parameters for the IDS (Intrusion Detection System) and IPS (Intrusion Prevention System) component of the SMTP server. SMTP servers are regularly attacked, both by incoming mail attacks (spam/viruses etc) and relay attacks (by spammers and other malware distributors trying to send mail through them). Because of this, there is a system in VPOP3 which will track attack attempts on the SMTP service and can automat…

Mail Sender Advanced Relay Settings

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Mail Sender Advanced Relay Settings SMTP Return Address The SMTP Return Address (or Return Path) is a hidden part of a message which says where bounce messages (and other automated responses) should be sent. (It is not the same as the Reply address

Exchange 2007

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Exchange 2007 You can link VPOP3 to Exchange Server, so that Exchange Server sends outgoing mail through VPOP3 and VPOP3 sends any incoming mail directly to Exchange Server. You should first of all set up VPOP3 to send and receive Internet email as normal.

Mappings

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Mappings In VPOP3, Mappings are a way of explicitly linking an email address to a user or list. They can also be used to indicate that an email address is remote, even though it would otherwise appear to be a local email address. In other email servers, a similar feature may be called 'aliases'

Security Settings -> Intrusion Protection Tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Security Settings -> Intrusion Protection Tab Settings -> Security Settings -> Intrusion Protection Tab Starting in VPOP3 v6.0, VPOP3 can monitor failed logins for all accounts across all services and block an attacker's IP address from accessing VPOP3 for a specified time

Setting up VPOP3 to work with Exchange 2003

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Setting up VPOP3 to work with Exchange 2003 The instructions below are for Exchange Server 2003. For other versions of Exchange see here. You can link VPOP3 to Exchange Server, so that Exchange Server sends outgoing mail through VPOP3 and VPOP3 sends any incoming mail directly to Exchange Server.

Forwarded Emails Not Arriving

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Forwarded Emails Not Arriving If you are having problems having VPOP3 forward incoming messages to an external address, but sending messages directly to that address works OK, and forwarding internal messages to that address works OK, then the problem may be the SMTP return address which VPOP3 is using.

French Webmail Language File

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

French Webmail Language File Copy/paste the text below to a file 'french.lng' or 'francais.lng' in the VPOP3 directory. (French users, feel free to update/correct the text below) #login page logintitle=VPOP3 Login webadminlogin=web admin login webmaillogin=web mail login enterusername=You must specify your VPOP3 username here bookmarksnotsupported=I'm sorry, but your web browser does not support this function. You will have to add this page to your bookmarks manually. loginfailed=Login Faile…

Spam Filter Rules: GetAddressType

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spam Filter Rules: GetAddressType Statement GetAddressType Version 2.4.6+ Purpose Analyses a specified email address and reports what 'type' of address it is The GetAddressType statement requires an email address and variable name, in the format

Allow Remote Access to VPOP3 Mailboxes

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Allow Remote Access to VPOP3 Mailboxes Sometimes people want to be able to access their office VPOP3 mail server from a remote site or mobile phone etc. These instructions assume you have a permanent Internet connection (eg ADSL, Cable etc). If you don't have a permanent Internet connection, see

ListServer Commands

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

ListServer Commands The ListServer is an automated process in VPOP3 which manages mailing lists. People can send commands to the ListServer to perform various functions remotely. Whether these commands are allowed, and exactly how they work depends on the particular mailing list's settings.

German Webmail Language Page

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

German Webmail Language Page Copy/paste the text below to a file 'german.lng' in the VPOP3 directory. (German users, feel free to update/correct the text below) #login page logintitle=VPOP3 Login webadminlogin=web admin login webmaillogin=Webmail Anmeldung enterusername=Sie müssen einen Benutzernamen angeben bookmarksnotsupported=I'm sorry, but your web browser does not support this function. You will have to add this page to your bookmarks manually. loginfailed=Anmeldung fehlgeschlagen …

Error message: Your connection has been blocked temporarily - Try again later

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Error message: Your connection has been blocked temporarily - Try again later If you get an error message in your email client software saying Your connection has been blocked temporarily - Try again later or Server access temporarily blocked! Please try again later

Spamfilter White/Blacklists

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spamfilter White/Blacklists This lets you set whitelists & blacklists for the spam filter. There are four lists you can manage. The Whitelist Addresses & Blacklist Addresses lists let you specify sender email addresses to check. With the default rule weights, if a sender's address is on the Whitelist, it will be allowed through the spam filter, and if it is on the Blacklist it will be blocked. If an address is on both the Whitelist and the Blacklist, they will cancel each other out, and the me…

How To Setup VPOP3 Service Security

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How To Setup VPOP3 Service Security VPOP3 can be configured to restrict access to its various services depending on the client computer's IP address. This is useful if you want to allow access from only certain IP addresses (eg within your LAN) and prevent access from other IP addresses (eg the Internet).

Spamfilter Whitelist & Blacklist

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spamfilter Whitelist & Blacklist The VPOP3 spamfilter has a whitelist and a blacklist for sender addresses. It also has a whitelist and blacklist for words/phrases. You can view these lists in the VPOP3 settings by going to Settings -> Spamfilter ->

Spamfilter.Whitelist table

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spamfilter.Whitelist table The Spamfilter.Whitelist table contains the spamfilter whitelist entries which do not contain wildcards or regular expressions. They are separated out to speed up checking. Columns * address - this is the email address in the whitelist

Accepting Incoming SMTP through a router

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Accepting Incoming SMTP through a router If your ISP is providing you with an SMTP mail feed (incoming SMTP) and you have VPOP3 connecting to the ISP through a router then you will probably need to modify the router configuration to allow this. Most routers' default configuration will only allow outbound connections (ie connections from the local network out to the Internet). If you need to accept incoming SMTP mail, then you need to tell the router to allow inbound connections on port 25 for …

Lua SMTP MX Control

Anonymous (anonymous@undisclosed.example.com) — 2026-02-24T15:49:48+00:00

Lua SMTP MX Control Every time VPOP3 is going to send messages using direct MX sending, it runs a script called mxout.lua which can be created/edited in Settings -> Scripts (or in the VPOP3 directory in VPOP3 v6.6 or earlier). Global Variables Starting with v8.8, the following global variables are defined:

SMTP -> General tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTP -> General tab This page is reached from Services -> SMTP Server, then the General tab. This page lets you set general settings for the SMTP service component of VPOP3. The SMTP service is how users send outgoing mail, and how incoming SMTP messages arrive. Service Name

Incoming SMTP Feed

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Incoming SMTP Feed An incoming SMTP feed is where incoming mail is sent directly to your mail server without going through your ISP's POP3 mail server on the way. Advantages An incoming SMTP feed has several advantages over going via a POP3 mailbox:

How to configure Outlook 2007

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to configure Outlook 2007 Email SMTP Authentication To set up SMTP authentication in Outlook 2007, if your VPOP3 requires it, go to Tools -> Account Settings, select your email account and press Change.... Then, press the More Settings... button

How to configure Outlook 2010

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to configure Outlook 2010 In many ways, configuring Outlook 2010 is a similar to configuring Outlook 2007. The biggest difference you are likely to notice is the new “Ribbon” interface, in place of the traditional menu bar (File, Edit, View, etc.) Email

Sending mail from different email addresses or domains

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Sending mail from different email addresses or domains VPOP3 does not (by default) place any restrictions on which email addresses or domains you can send mail from. However, there may be external restrictions on which email addresses/domains you can send from. For instance, if you send mail through your ISP's mail server, they may only allow you to send mail from specific addresses, or the domain you send mail from may have a sender policy defined, such as

SMTP Service - Filtering

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTP Service - Filtering The SMTP Server -> Filtering tab lets you set up filtering of messages going through the VPOP3 SMTP service. This may be incoming SMTP messages, or locally sent messages. SMTP Rules SMTP Rules let you create custom rules for processing messages as they go through the VPOP3 SMTP service.

SMTPClientBlocks Replacement

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTPClientBlocks Replacement Use: ~smtpclientblocks~ ~end~ The format string can have the replacements * address - IP address (returned as host address or CIDR address as appropriate) * date - the date/time the address was added to the database in YYYYMMDDHHMMSS format

550/553 Not Permitted error from BT Internet's mail servers

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

550/553 Not Permitted error from BT Internet's mail servers BT Internet's mail servers only allow messages to be sent from 'approved' email addresses. If you try to send messages from other addresses BT's mail servers may return a '550 Not Permitted' error, a '553' error, or may silently discard the message depending on what their server feels like doing today.

Backscatter

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Backscatter In email, “backscatter” is the term used if you send bounce messages back to spam messages. As most spam messages use forged email addresses, then the bounce messages will go to an innocent person, who will find them very annoying. Stopping VPOP3 from sending Backscatter

How to configure Outlook 2003

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to configure Outlook 2003 Email (to be completed) Address Book To configure Outlook to use the VPOP3 global address book, go to Tools -> E-Mail Accounts in Outlook Then choose Add a new directory or address book and press Next Choose Internet Directory Service (LDAP)

Settings -> Global Address Book

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Settings -> Global Address Book The VPOP3 global address book allows users to access a shared address book from any email client which supports the 'LDAP' protocol (most modern email clients do, but they may call it 'directory service' Importing Entries

Groups

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Groups In VPOP3 a 'group' is mainly an administrative feature. If you only wish to have a list of email addresses to send messages to under one address, you should use the 'List' feature instead. The main function of Groups is to let you set certain user attributes for a whole group of users at once.

LAN Forwarding Scripting

Anonymous (anonymous@undisclosed.example.com) — 2025-08-20T16:08:40+00:00

LAN Forwarding Scripting (Added in V8.7) This is stored in the 'LanForwarding.lua' script in Settings -> Scripts Pre-send These functions are called before the message is placed in the LAN Forwarding queue There are two global variables set: *

Misc -> Advanced Tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Misc -> Advanced Tab Settings -> Misc Settings -> Advanced You will normally not need to change any settings on this page unless VPOP3 technical support have suggested it. If you do make changes, and want to go back to the original settings, the Restore Defaults button will restore the settings to their defaults.

SMTPClientAllows Replacement

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTPClientAllows Replacement Use: ~smtpclientallows~ ~end~ The format string can have the replacements * address - IP address (returned as host address or CIDR address as appropriate) * date - the date/time the address was added to the database in YYYYMMDDHHMMSS format

550 5.7.1 Relaying not allowed! Bad sender IP address

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

550 5.7.1 Relaying not allowed! Bad sender IP address This SMTP error message means that the computer which is sending the message is not permitted to send outgoing messages based on the VPOP3 SMTP Service's Access Restrictions. This is probably because someone is trying to send messages from outside your local network, and you have not configured VPOP3 to allow this. You have to be careful when allowing this, because you may configure VPOP3 to be an open-relay, which is a

Delete OutQueue messages directly from the database

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Delete OutQueue messages directly from the database If there is an extremely large number of messages (eg hundreds of thousands) in the VPOP3 OutQueue, then it may take a very long time for VPOP3 v5 and later to start as it check the message database tables for consistency during initialisation.

How to configure Mozilla Thunderbird

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to configure Mozilla Thunderbird This article won't show you all the possible settings in Thunderbird, because there are so many. Thunderbird is one of the most powerful & flexible email clients available at the time of writing, especially if you use IMAP4 (with VPOP3 Enterprise).

Using VPOP3 with Microsoft Exchange Server

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Using VPOP3 with Microsoft Exchange Server You can link VPOP3 to Exchange Server, so that Exchange Server sends outgoing mail through VPOP3 and VPOP3 sends any incoming mail directly to Exchange Server. You should first of all set up VPOP3 to send and receive Internet email as described in the online help.

Import Users From File

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Import Users From File VPOP3 supports the importation and exportation of users, via a CSV file (see for a specification of the CSV file format). NOTE: This process is not designed to provide a complete backup of user data, nor is it intended to facilitate moving VPOP3 to a new computer. Instead, see the following relevant pages:

Lua SMTP Relay Control

Anonymous (anonymous@undisclosed.example.com) — 2025-08-14T09:24:55+00:00

Lua SMTP Relay Control Every time VPOP3 is going to send messages via SMTP Relay, it runs a script called relayout.lua in the VPOP3 directory. Global Variables This script may have global variables, depending on your version of VPOP3. In VPOP3 3.0.0L and later, there are two read-only global variables set at the start of the script:

Outgoing Message Scripting

Anonymous (anonymous@undisclosed.example.com) — 2024-03-21T10:49:54+00:00

Outgoing Message Scripting Every time VPOP3 adds a message to the Outgoing mail queue, it runs a script called outmessage.lua. Scripts are stored as files in the VPOP3 directory in VPOP3 v6.6 and earlier, or managed through the Settings -> Scripts page in VPOP3 v6.7 and later.

SMTPClientAllowRemove Action

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTPClientAllowRemove Action (VPOP3 Enterprise Only) This removes an entry to the SMTP Client Allow list. The data specified is: * IPAddress - the IP address to add. This can be an individual IP address or a CIDR address (IPv4 and IPv6 addresses are allowed)

SMTPClientBlockRemove Action

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTPClientBlockRemove Action (VPOP3 Enterprise Only) This removes an entry to the SMTP Client Block list. The data specified is: * IPAddress - the IP address to add. This can be an individual IP address or a CIDR address (IPv4 and IPv6 addresses are allowed)

Dynamic IP Address

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Dynamic IP Address VPOP3 needs to run on a computer with a static (fixed) IP address on the 'local network'. This does not mean that it will not work with ISPs that dynamically assign IP addresses! A computer which has both a LAN adapter AND a dial-up adapter will have two IP addresses: one for the

PostgreSQL Replication

Anonymous (anonymous@undisclosed.example.com) — 2019-02-06T17:10:31+00:00

PostgreSQL Replication PostgreSQL 9.1 (used in VPOP3 5 and later) supports replication from a 'Master' to a 'Slave' database server. This can be used with VPOP3 for having a near-realtime backup of your settings & messages. To use the replication, you need to have a file share which is accessible from both PCs. The thing to watch out for is that the PostgreSQL services may be running as a different user from the currently logged in user, so make sure that the user(s) which the PostgreSQL servi…

Sender Policy Framework / SPF

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Sender Policy Framework / SPF SPF is a system used to tell mail servers which IP addresses can send mail from which domains. It is designed to reduce 'spoofing' of email addresses. For instance, if you receive an email message from your bank, your mail software can check that it came from an IP address authorised to send mail from your bank, and treat the message with suspicion if it didn't come from an authorised IP address.

SMTP Rule Example - restrict who can send to a local email address

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTP Rule Example - restrict who can send to a local email address If you have a local email address (a user, group or distribution list) and you want to restrict which email addresses can send messages to this address, you can use SMTP rules. There are a few ways you can configure the SMTP rules for this scenario.

Autoresponder Global Scripting

Anonymous (anonymous@undisclosed.example.com) — 2026-03-23T15:29:29+00:00

Autoresponder Global Scripting For scripting to modify the autoresponder text which is embedded in the autoresponder itself, see Autoresponder Scripting The Autoresponder Global Script is executed for every autoresponse. It is stored in the 'Autoresponder.lua' script in Settings → Scripts

Delete list member from all lists

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Delete list member from all lists You can delete an email address from all VPOP3 distribution & mailing lists. Go to Settings → Database → Query Alternatively, at a command prompt in the VPOP3 directory run psql (The password is 'vpop3pass')

POP3 Mail Collection

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

POP3 Mail Collection POP3 Mail Collection is when VPOP3 will collect mail from an external POP3 mailbox - for instance, from an Internet Provider. POP3 General This page tells VPOP3 how to collect mail. * POP3 Server Address - this is the name (or IP address) of the POP3 server from which you want VPOP3 to collect mail

SMTP Service -> Advanced Tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTP Service -> Advanced Tab Services -> SMTP Server -> Advanced Tab Refuse SMTP Connections from This setting should be rarely needed, and should be normally left blank. It is here for historic purposes. If you put some text in this box, then VPOP3 will refuse any SMTP connections from clients whose 'HELO'/'EHLO' command data contains the text specified here as a substring. Eg, if this setting is set to '.myisp.com', then VPOP3 would refuse SMTP connections from any client which sends the c…

SMTP Reputation Stats

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTP Reputation Stats (Added in v6.20) If you receive email by direct incoming SMTP (not via an ISP or filtering service) then you can tell VPOP3 to report sender reputation statistics back to VPOP3. This is enabled/disabled in the Settings -> Misc Settings page.

Autoresponder

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Autoresponder An autoresponder is a way of automatically replying to messages as they arrive in a user's mailbox. In VPOP3, an incoming message must arrive in a user's mailbox for the autoresponder to trigger. If you use forwards, assistants, mappings, etc to divert a message before it arrives in the mailbox, the autoresponder will never trigger. If you want to use an autoresponder, but not keep the original message, then make sure the message arrives in the mailbox (eg by using an 'Assistant'…

SMTPClientBlockAdd Action

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTPClientBlockAdd Action (VPOP3 Enterprise Only) This adds an entry to the SMTP Client Block list. The data specified is: * IPAddress - the IP address to add. This can be an individual IP address or a CIDR address (IPv4 and IPv6 addresses are allowed)

What is the difference between VPOP3 Basic and VPOP3 Enterprise?

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

What is the difference between VPOP3 Basic and VPOP3 Enterprise? VPOP3 Enterprise includes all the features of VPOP3 Basic, plus: * IMAP4 mail support as well as POP3, SMTP and Webmail * Support for database (ODBC) links for the Global Address Book and Mailing Lists. * Shared calendars & webmail address books

Socket Error 10049 - The specified address is not available from the local computer

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Socket Error 10049 - The specified address is not available from the local computer This error normally means that you have entered an invalid address on the IP Address to Bind To entries on the Services page in the VPOP3 settings. The addresses entered here should be either

Find the IP address of the VPOP3 Computer

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Find the IP address of the VPOP3 Computer To find the IP address of the VPOP3 computer, in Windows go to Control Panel -> Network and Sharing Center. Press the Local Area Connection link Then press 'Details'. Look for the 'IPv4 Address' setting.

How to Forward Messages to an External Address

Anonymous (anonymous@undisclosed.example.com) — 2025-08-18T15:13:06+00:00

How to Forward Messages to an External Address There are two possible methods to forward messages to an external address: * Use this method if it is for a person who might want to receive their email whilst in the office and/or get the mail sent to an external address.

Configuring iCal on Mac OSX to connect to VPOP3's CalDAV service

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Configuring iCal on Mac OSX to connect to VPOP3's CalDAV service This requires VPOP3 v6 or later. The following instructions are for Mac OS X v10.7.5 but should work with similar versions. We have not been able to create an account by going to System Preferences

Setting up an iPhone/iPad/iPod Touch

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Setting up an iPhone/iPad/iPod Touch To set up an iPhone to access VPOP3's mail, you first of all need to configure VPOP3 to allow access by remote users (unless you will only be using the iPhone in the office, connected via WiFi to the office LAN). Adding the mail account to your iPhone/iPad

"Too many logins" error message

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

"Too many logins" error message VPOP3 version 4 and later have a limit on the number of concurrent logins which can be received for a single user or from a single IP address. This is to prevent a single user from bringing the server down. The current default limits are 20 per user, or 1000 per IP address (to allow multiple people sharing a NAT IP address)

VPOP3 Status Monitor Problems

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

VPOP3 Status Monitor Problems The VPOP3 Status Monitor is the program which shows the little (usually red) postbox icon in the Windows task tray. This usually launches automatically from the Windows startup group. This program is VPOP3Status.EXE on the disk, or can be run manually from

VPOP3 Server Access Not Allowed

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

VPOP3 Server Access Not Allowed If you get an error like: -ERR VPOP3 Server access not allowed! when trying to access VPOP3, then this means that the relevant server's IP Access Restrictions defined in VPOP3 do not allow access from your client computer.

Autoresponder Commands

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Autoresponder Commands This article only applies to VPOP3 v4 and earlier A VPOP3 autoresponder can contain special text strings to create special behaviour, in addition to plain text as part of the response. There are three types of 'command' *

Lists

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Lists The Lists section in VPOP3 lets you view and manage the various types of 'List' which VPOP3 supports * Distribution Lists * Mailing Lists * Forwardings * ODBC Mailing Lists * Groups Using a list A list will contain zero or more 'members' (usually email addresses) which can be messaged all at once. To send a message to all the members of a list, you will usually send an email to the listname at a valid domain.

Lua SMTP Rules Scripts

Anonymous (anonymous@undisclosed.example.com) — 2026-03-26T11:41:59+00:00

Lua SMTP Rules Scripts When VPOP3 is processing SMTP Rules for messages received by SMTP, it runs a script called smtprules_(x).lua, where (x) is replaced by the numeric ID of the SMTP service VPOP3 processes SMTP Rules at least three times for each message - once when MAIL FROM has been received, once for each RCPT TO, and once when the whole message data has been received.

SMTPClientAllowAdd Action

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTPClientAllowAdd Action (VPOP3 Enterprise Only) This adds an entry to the SMTP Client Allow list. The data specified is: * IPAddress - the IP address to add. This can be an individual IP address or a CIDR address (IPv4 and IPv6 addresses are allowed)

SMTPSPFWhitelist Replacement

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTPSPFWhitelist Replacement Use: ~smtpspfwhitelist~ ~end~ If you specify the parameter serverid then this will just return white list entries which match all servers or this server. The format string can have the replacements * id - the whitelist entry ID

GDPR for VPOP3 self-hosted software

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

GDPR for VPOP3 self-hosted software VPOP3 is an email server program, it is not a service, so if you use VPOP3 on your own computer we are not a “data controller” or a “data processor” under GDPR rules as we never see any of your data (unless you give us permission to remotely connect to your PC for technical support purposes).

Windows Server Port Conflicts

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Windows Server Port Conflicts LDAP Server Conflict When you run VPOP3 on a server edition of Windows you may receive an error saying LDAP server not started - couldn't bind socket port 389 (10048) This error happens because VPOP3 contains an LDAP (Lightweight Directory Access Protocol) server for its global address book functionality, and the Windows 2000/2003 'Active Directory Service' also uses LDAP as its mechanism. These two services are conflicting.

421 4.3.2 VPOP3 Too many connections from your IP address - try later

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

421 4.3.2 VPOP3 Too many connections from your IP address - try later If you see this error message when you are sending messages, then it means that VPOP3 has detected too many simultaneous connections from your IP address. This would usually happen if the sender is another mail server as they can make many simultaneous connections when there are lots of messages to send. The error code that VPOP3 gives means that the sender should try sending the messages later, so it should be possible to e…

How To Allow Mail Relay Through VPOP3

Anonymous (anonymous@undisclosed.example.com) — 2025-05-21T07:57:18+00:00

How To Allow Mail Relay Through VPOP3 If you are allowing remote access into VPOP3 to collect mail then you may also want those remote users to be able to send their outgoing mail through VPOP3 as well. This is more complex than allowing users to collect mail, because, by default, SMTP connections are not authenticated. This means that when someone tries to send a message through VPOP3, VPOP3 doesn't know who that user is. This can cause a problem if unauthorised users try to send mail through…

Error expanding recipient - Nesting Level too deep

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Error expanding recipient - Nesting Level too deep You receive an error message saying: Error expanding recipient "" Nesting Level too deep (51) Check the configuration for loops (Note the '51' number may be slightly different - that's the nesting level - anything over 50 is detected as an error)

Error message after sending RCPTTO: - error 0 - text 550 5.7.1 Relaying not allowed! Bad sender IP address

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Error message after sending RCPTTO: - error 0 - text 550 5.7.1 Relaying not allowed! Bad sender IP address If you get this error message from within Webmail, then it usually means that the SMTP service access restrictions are blocking Webmail from sending mail.

Error Messages

Anonymous (anonymous@undisclosed.example.com) — 2025-10-06T15:21:37+00:00

Error Messages This is the place to look if you are trying to trouble shoot a problem and you have received or have access to a specific error message or error code. If instead your problem is that something you think is set up correctly is not working then the best place to look would be the

Fax Printer Driver Address Book

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Fax Printer Driver Address Book The VPOP3 Fax Printer Driver obtains address book details using LDAP. So, you must make sure that the VPOP3 LDAP service is enabled, and that the Fax Printer Driver has the correct VPOP3 address, and the same TCP/IP port defined to access the LDAP service as VPOP3 is using.

General instructions for setting up an email client

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

General instructions for setting up an email client If your specific email client program is not listed, you can set up any other email client by using the following instructions: * In your email client create a new 'account' * For the incoming and outgoing server name/address use the

"How To" Articles

Anonymous (anonymous@undisclosed.example.com) — 2026-03-18T20:20:50+00:00

"How To" Articles Installation/Upgrades * Download VPOP3 * Install VPOP3 * Move VPOP3 * Upgrade VPOP3 * Upgrade VPOP3 to version 5.x or 6.x from version 4 or earlier * Upgrade VPOP3 to version 7.x from version 6 or earlier * Upgrade VPOP3 to version 8.x from version 7 or earlier * Upgrade VPOP3 to version 9 or later from version 7 or 8 * Performance Requirements * Installation Checklist General Configuration * Initial Configuration * Users * Add an Alias * Create…

How to tell VPOP3 that some users in the local domain are not to be handled by VPOP3

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to tell VPOP3 that some users in the local domain are not to be handled by VPOP3 In some situations you will have a situation where most of your users are handled by VPOP3, but several users will collect their mail directly from a separate POP3 account on your ISP, even though they may have an email address on the same domain as other users.

Seeing where a message came from

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Seeing where a message came from Sometimes you need to check to see where a message really came from. The 'From:' email address is easily forged, so that cannot be relied upon. The first thing you have to do is to get the full message headers. These may look daunting, but are very useful for problem diagnosis.

Using a Mobile Phone with VPOP3

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Using a Mobile Phone with VPOP3 Many people want to use a mobile phone to send/receive their email nowadays. This is usually easy to do with VPOP3. The recommended way is to have the phone connect directly to VPOP3 for sending/receiving email. To do this, you need to do three things:

Using VPOP3 Spam Filtering with LAN Forwarding

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Using VPOP3 Spam Filtering with LAN Forwarding When using the VPOP3 Spam filter with LAN forwarding you need to be aware a bit of how it works. The spam filter will only quarantine messages which are going to a VPOP3 user. This is because that user needs to be able to log into VPOP3 to be able to view their quarantined messages.

How To Move VPOP3 Version 2 to a New PC

Anonymous (anonymous@undisclosed.example.com) — 2019-11-12T16:06:44+00:00

How To Move VPOP3 Version 2 to a New PC (Also applies to version 1.x) To move VPOP3 to a new PC you should go through the following steps: * Copy the VPOP3 files * Copy the VPOP3 directory and subdirectories from the old PC to the new PC. (If you are moving to Windows Vista/2008/7/2012/8 or later, do NOT copy the files to a 'Program Files' folder on the new PC. Recent versions of Windows have special protection for those folders, which is not compatible with VPOP3)

SMTP Relay Protection in VPOP3

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTP Relay Protection in VPOP3 SMTP Relay Protection should be used on ALL SMTP mail servers (such as VPOP3) which have a permanent connection to the Internet. You may also want to use it on servers which are only connected occasionally via a dial-up connection.

IMAP4 -> Advanced tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

IMAP4 -> Advanced tab This page is reached from Services -> IMAP4 Server, then the Advanced tab. Here are some advanced options for the IMAP4 service in VPOP3 Fake access to inaccessible mailboxes In the IMAP4 service you may have folders which do not exist. For instance, if you are accessing a shared Inbox folder from a user called 'Karen', then their folder will be called

IMAP4 Server Scripting

Anonymous (anonymous@undisclosed.example.com) — 2025-06-23T10:51:46+00:00

IMAP4 Server Scripting (Added in V6.12) DoCapability function When the IMAP4 CAPABILITY command is received, VPOP3 generates a capability string based on settings, then calls DoCapability(ipaddr, capabilities) * ipaddr = IP address of the client computer

Incoming SMTP Mail

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Incoming SMTP Mail If you have an incoming SMTP mail feed, then the mail server sending mail to you will connect to your VPOP3 computer to send the mail. The mail connection is controlled by the sending computer. IMPORTANT If you have a permanent Internet connection with a static IP address, the usual way of having incoming SMTP is to configure your

ListServer Settings

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

ListServer Settings Settings -> ListServer Settings In VPOP3, the ListServer is an automated 'user' which handles mailing list requests, such as subscribe & unsubscribe commands. Anyone can send an email to the ListServer to subscribe to (public) mailing lists, or unsubscribe from mailing lists they are on, or see a list of public mailing lists etc.

Signature Script

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Signature Script If you want more complex signatures on outgoing emails, rather than the static text/HTML you can define within VPOP3, then you can use a simple Lua script to define the signature. The Lua script is stored in a file called signature.lua

Spam Filter Rules: AddNullAddress

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spam Filter Rules: AddNullAddress Statement AddNullAddress Version 2.2.1+ Purpose Temporarily adds an email address to VPOP3's configuration where the mail will be discarded AddNullAddress is intended for use to make 'pseudo' addresses, such as 'spam@' and 'notspam@' for the spam filter to process.

Spam Filter Rules: IfLocalAddress

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spam Filter Rules: IfLocalAddress Statement IfLocalAddress Version 2.2.1+ Purpose Allows you to check if a specified email address is local to your VPOP3 installation IfLocalAddress requires just one paramater; the address, in the format IfLocalAddress

Status

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Status The VPOP3 Status screen has two tabs * Server Status * Sessions Server Status The Server Status tab is essentially a copy of the VPOP3 Status Monitor information. * Connection Status - this shows the 'online' status of VPOP3. If it says idle, it does not mean VPOP3 is not working, or not doing anything, it just means that it is not currently sending or collecting mail from the Internet.

User Delivery Script

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

User Delivery Script (VPOP3 v6.5 or later) If there is a /delivery.lua script, this Lua script can override VPOP3's message delivery options. You can edit this in the Settings -> Scripts page in the settings. This script affects how VPOP3 will handle how messages being delivered to this user are handled.

Message Rules

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Message Rules The Edit User -> Message Rules tab can be used to create/edit rules which are processed when messages arrive in a User's mailbox. They can be used to copy messages, mark them as read, delete them, etc VPOP3 will process Message Rules in the order they appear in the list. If you want to change the order of the rules, you can drag & drop them into the correct order. Usually when VPOP3 has processed a rule, it will go on to check further rules, but you can use the

Webmail Tabs

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Webmail Tabs From version 4 onwards, VPOP3 webmail has a tabbed structure, which enables you to move between various screens with minimal effort. By using tabs, the entire webmail can be loaded in one go - so there is no need to waste time and bandwidth by downloading the same key components each time you switch between the various parts of the webmail.

What's new in version 5 webmail?

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

What's new in version 5 webmail? This is a list of some of the most noticeable changes to VPOP3's webmail interface for version 5. For a more detailed list of changes, view our bugtracker. [VPOP3 Version 5 - mobile compatible webmail] Mobile compatible webmail If you access version 5 webmail from a mobile device, you will probably be redirected to the mobile compatible version. It is a cut-down version of Webmail, which retains the key features, but doesn't utilise the extra features which w…

SMTPIDSEvents Replacement

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTPIDSEvents Replacement Use: ~smtpidsevents~ This returns the latest entries from the SMTP client logging database. It will return 100 entries unless the count parameter is specified in the URL, in which case that will specify the maximum number of entries to return.

UserRuleActions Replacement

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

UserRuleActions Replacement Use: ~userruleactions~ ~end~ Required parameter: Account, RuleId This returns the message rule actions for the specified rule The format string can have the replacements * id - numeric ID of the action * type - action type

How do I login to the PSCS website?

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How do I login to the PSCS website? You can access your licence details and invoices on the www.pscs.co.uk website. To log into the website click the Login button at the top right of the website. You will log in using the email address you specified linked to your account (usually the email address you used when placing your order) and your password. The password is initially randomly generated and emailed to you with your invoice(s). If you have not received the password, or have forgotten i…

Socket Error 10047 - Addresses in the specified family cannot be used with this socket

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Socket Error 10047 - Addresses in the specified family cannot be used with this socket Meaning: Addresses in the specified family cannot be used with this socket This error only normally occurs during VPOP3 startup. There are two main possible reasons for this error:

Socket Error 10048 - Specified Address Already in Use

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Socket Error 10048 - Specified Address Already in Use This error only normally occurs during VPOP3 startup. It occurs if some other software running on the same machine as VPOP3 is using one of the ports that VPOP3 is already using. This could be a proxy like WinGate, WinProxy or anti-virus software that acts as a proxy, an LDAP server (e.g. Active Directory) or another mail server program (e.g. Exchange Server). The latter two causes are particularly common on

How to Access VPOP3's WebMail

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to Access VPOP3's WebMail To access the VPOP3 WebMail facility open up a web browser and, in the address box type http://:5108 Then, enter the relevant VPOP3 username & password See: VPOP3 Webmail Help, Allowing remote access to webmail

Configuring Calendar on iOS

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Configuring Calendar on iOS These instructions are for configuring a new Calendar account on iOS for iPhone, iPad and iPod Touch. The version of iOS used for these instructions is iOS v6.0, but they will probably work or help with other versions of iOS.

Configure SRS

Anonymous (anonymous@undisclosed.example.com) — 2025-08-18T15:28:11+00:00

Configure SRS In VPOP3 8.8 and later, you can use Lua scripting to implement 'SRS' (Sender Rewriting Scheme') in VPOP3 This involves adding a couple of functions to rewrite outgoing return paths in 'relayout.lua' or 'mxout.lua' as appropriate and a couple of functions to redirect rewritten bounce message recipients in 'smtpsvr.lua'

How to create an SSL Certificate

Anonymous (anonymous@undisclosed.example.com) — 2026-03-23T10:18:43+00:00

How to create an SSL Certificate VPOP3 Enterprise supports SSL certificates for encrypted sessions. The basic mechanism to create an SSL certificate is that you have to generate a CSR (Certificate Signing Request) then send that to a CA (Certificate Authority) who will sign your certificate and give you the certificate back.

Creating Extra SMTP Services

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Creating Extra SMTP Services In VPOP3 Enterprise (not VPOP3 Basic) you can create multiple SMTP services. This can be useful if you want VPOP3 to listen on different ports and/or have different settings. There are two ways of doing this. Have a single SMTP service listening on multiple ports or IP addresses

How to configure Encore 32 Estate Agent Software

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to configure Encore 32 Estate Agent Software * Close down the Encore software * Open up the “Maintenance 32” program * Click on “Email Configuration” * Enter the IP address of the VPOP3 computer into the “SMTP Server address”

Handling mail for multiple incoming domains

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Handling mail for multiple incoming domains VPOP3 can easily handle mail for several incoming domains. Exactly how you do it depends on the exact situation. All domains are 'aliases' If the domains are aliases of each other, for instance, you have 'mycompany.com' and 'mycompany.org', both of which are the same, so each address at mycompany.com also exists at mycompany.org, and the emails go to the same people regardless of which domain is used, then you simply configure the domains in the ma…

Locked Accounts

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Locked Accounts VPOP3 has a security feature which will lock out an account after it has had several failed login attempts. This feature is to make it harder for an attacker to use a brute force or dictionary password attack on an account. The default settings are that after more than 3 attempts to log into an account with an incorrect password, VPOP3 will lock the account for 30 minutes. You can change these settings on the

How to make VPOP3 re-download POP3 messages from the ISP

Anonymous (anonymous@undisclosed.example.com) — 2026-04-06T17:57:00+00:00

How to make VPOP3 re-download POP3 messages from the ISP If you have the VPOP3 Mail Collector setting Leave Mail On Server enabled, then VPOP3 will leave your messages on the ISP POP3 server for the specified number of days after downloading it. If, during this time, you want to make VPOP3 download those messages again, then you can do so.

Trying to perform administrative tasks without rights

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Trying to perform administrative tasks without rights This problem can have two symptoms: * When trying to access the VPOP3 settings you get an error “You are trying to perform an VPOP3 administration task while logged in as a non-administrator

Outbound Messages Not Appearing in Monitor Target Mailbox

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Outbound Messages Not Appearing in Monitor Target Mailbox For VPOP3 to monitor outbound messages it needs to be able to work out that the message is FROM: a user whose mail should be monitored. To do this it has to examine the FROM: address in the message header.

Problems sending mail via BT from your own domain

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Problems sending mail via BT from your own domain BT Internet only allow you to send mail through their mail servers from your BT Internet address or other registered address. Attempts to send from other addresses will give you a 553 SMTP error message.

Problems sending messages to spam@

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Problems sending messages to spam@ If a VPOP3 user forwards a message to spam@, then the VPOP3 spam filter will train itself that that message was spam. If, when you forward the message, you get an error message like: Subject: Mail Delivery Failure Delivery Failure Report. The following message was incorrectly addressed. Recipient: "spam" is unrecognised.

How to remove messages from the outbound queue

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to remove messages from the outbound queue To delete messages from the VPOP3 'OutQueue': * log into the VPOP3 settings * go to the Users page * click on the OutQueue entry in the accounts list. This will show you a list of all the messages waiting to be sent by VPOP3

Sender Domain Must Resolve

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Sender Domain Must Resolve If you receive an 'SMTP Client Error' something like: 451 (user@domain.com) Sender Domain Must Resolve this means that the ISP's mail server cannot find the domain.com part of the email address. Often this means that the FROM address of the message is invalid, or that the

SMTP Rules

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTP Rules Download rules are applied to messages which arrive at VPOP3 using SMTP - either locally sent messages, or incoming messages received through an SMTP mail feed. To configure the rules, go to the VPOP3 settings, then Services -> SMTP Service

Spam filter not working

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spam filter not working If the VPOP3 spam filter appears not to be working at all, the first thing to do is to look at the message headers of an incoming message to see if the spam filter is being run at all. Check to see if a header line beginning with X-VPOP3-Spam

How to move the VPOP3 Message Store to a new PC

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to move the VPOP3 Message Store to a new PC Use this option if you want to have VPOP3 running on one PC, but have the message store database on another PC. Manually Install PostgreSQL on the new PC Download the 'pgInstaller' version of PostgreSQL from the

Web Based Administration

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Web Based Administration VPOP3 is administered through your web browser. You can access the administration settings by going to Start -> Programs -> VPOP3 -> Configure VPOP3 in Windows on the PC where VPOP3 is installed, or by right-clicking on the VPOP3 status monitor icon in the task tray, and choosing

When sending mail, VPOP3 adds 'PRVS=...' to the sender address

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

When sending mail, VPOP3 adds 'PRVS=...' to the sender address This is because VPOP3 version 5 and later support BATV. BATV helps to eliminate 'backscatter spam', where someone else sends spam pretending to be from you, and then you receive all the bounce messages from those messages. BATV encodes the sender address in a special way so that VPOP3 can detect that a bounce message is in response to a message that you actually sent.

AutoresponderInfo Replacement

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

AutoresponderInfo Replacement Use: ~autoresponderinfo~ Required parameter: responderid - the ID of the autoresponder This returns a JSON structure containing the details of the specified autoresponder. The return structure is an object containing:

UserRuleActions Replacement

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

UserRuleActions Replacement Use: ~userruleactions~ ~end~ Required parameter: RuleId This returns the message rule actions for the specified rule The format string can have the replacements * id - numeric ID of the action * type - action type

Access Restrictions Internal Format

Anonymous (anonymous@undisclosed.example.com) — 2023-08-02T08:22:37+00:00

Access Restrictions Internal Format VPOP3 internally stores service IP Access Restrictions in its settings database using the following format to encode the multiple entries These are stored in the settings database as *ALLOWED*.DAT (using VPOP3SETTINGS GET *ALLOWED*.DAT will list them)

Database query to alter LAN Forwarding rules for one server to go to another

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Database query to alter LAN Forwarding rules for one server to go to another If a LAN forwarding destination server fails, you may wish to change the queued messages to go to the new server. (Note that, if planning ahead, it may be easier to use DNS

Database query to alter LAN Forwarding rules for one server to go to another

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Database query to alter LAN Forwarding rules for one server to go to another If a LAN forwarding destination server fails, you may wish to change the LAN forwarding rules to point to the new server. (Note that, if planning ahead, it may be easier to use

Autoresponder scripting

Anonymous (anonymous@undisclosed.example.com) — 2025-05-28T09:24:38+00:00

Autoresponder scripting For scripting to alter the whole autoresponder definition and set in the VPOP3 settings rather than embedded in an autoresponder itself, see Autoresponder Global Scripting In an autoresponder, you can create a Lua script by surrounding it with & tags, eg

Bandwidth Control

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Bandwidth Control (VPOP3 Enterprise Only) Every time a connection is made to a VPOP3 service, or a user logs into a service, VPOP3 Enterprise runs a Lua function which can assign the connection a bandwidth pool, or assign a bandwidth limit on the connection.

DMARC Reporter Script

Anonymous (anonymous@undisclosed.example.com) — 2023-11-12T09:51:40+00:00

DMARC Reporter Script (from VPOP3 v8.6 onwards) This script lets you customise how VPOP3 sends DMARC reports to the sending domain. This can be useful in case the sending domain's DMARC configuration is incorrect as that can cause errors sending the reports or cause messages to be 'stuck' in VPOP3's Outqueue. These problems won't cause any lasting damage, but may be inconvenient or annoying, so you can alter the behaviour using Lua scripting

Edit a user

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Edit a user To edit a user, go to the Users list in the VPOP3 settings and double-click on the username. * General * Passwords * Routing * WebMail Settings * Autoresponder * Message Rules * Permissions * Quotas * Aliases * Address Book * Signature * Advanced * Media * Finger Info

Error Handling Scripting

Anonymous (anonymous@undisclosed.example.com) — 2023-11-20T10:18:01+00:00

Error Handling Scripting For most error messages that VPOP3 generates, it allows control of error messages, eg to limit the frequency of error messages if they would be generated repeatedly. These limits are set in Settings -> Admin Settings -> Message Control. However, if you want more granular control, you can use Lua scripting for more fine-grained control

Database query to export LAN Forwarding rules

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Database query to export LAN Forwarding rules At a command prompt in the VPOP3 directory run psql (The password is 'vpop3pass') Then, type \copy (select conditions, address, server, username, password, outaddress as rewriteaddress, matchcount as matches from rules.lanforwarding order by ruleorder) to 'c:/temp/x.csv' csv header;

Database query to get all lists and members

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Database query to get all lists and members At a command prompt in the VPOP3 directory run psql (The password is 'vpop3pass') Then, type \copy (select l.name, address from users.listmembers m inner join users.lists l on m.list=l.id) to 'c:/temp/x.csv' csv header;

LAN Forwarding Queue Status

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

LAN Forwarding Queue Status To view the LAN Forwarding Queue Status, go to Settings -> Local Mail -> LAN Forwarding -> Queue Status The LAN Forwarding Queue shows the messages which VPOP3 has currently got queued to be sent to another mail server on your network using SMTP. The LAN Forwarding Queue status page shows a simple list of the messages waiting to be sent. The four columns in the table show:

loginaudit Database table

Anonymous (anonymous@undisclosed.example.com) — 2023-08-15T07:33:58+00:00

loginaudit Database table This contains data showing login attempts within the most recent 30 days * id - incrementing ID of loginaudit entry * ipaddress - IP address the login attempt came from * datetime - the date & time the event occurred

Monitor Scripting

Anonymous (anonymous@undisclosed.example.com) — 2019-08-27T16:13:40+00:00

Monitor Scripting (Added in V6.15) This script has three functions: * MonitorIncoming * MonitorInternal * MonitorOut The functions are similar, except they are called when different messages are to be monitored (incoming, internal and outgoing messages respectively).

Mail Connectors -> Mail Senders

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Mail Connectors -> Mail Senders The Mail Sender tells VPOP3 how to send mail out to the Internet. If you want to send mail for specific users to another specific mail server (e.g. a local Microsoft Exchange Server or another VPOP3 server) then use the

Message Headers

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Message Headers This article describes some of the headers which VPOP3 can add to messages. Note that some of these may be added by customisable scripts used by VPOP3, so may not match exactly, but the descriptions below are for the defaults distributed with VPOP3.

Message Monitoring

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Message Monitoring Message monitoring in VPOP3 will tell VPOP3 to send a copy of all the outgoing, internal and/or incoming mail from/to specified users to be sent to another specified user. In the current versions of VPOP3, all monitored messages are sent to the same user (or list), you cannot specify different recipients for different monitored users. (This may be something that is added/enhanced in the future)

Misc -> External Fax Tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Misc -> External Fax Tab Settings -> Misc Settings -> External Fax The External Fax tab is for use with some external fax server applications which work by collecting mail from a POP3 mailbox. If a Fax Server Mailbox is selected, then VPOP3 will automatically send any locally sent mail to that mailbox if the recipient is local, but doesn't match another local address (a user, list, mapping etc),

Misc -> General Tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Misc -> General Tab VPOP3 Host Name The VPOP3 Host Name is used by VPOP3 when it is telling other mail software what it is called. For instance, when it connects to another SMTP server it will send the host name as the parameter for the HELO or EHLO command, and when an SMTP client connects to VPOP3, it announces its name in the welcome banner as required by the SMTP standard.

SMTPStats.SMTPClientFailures table

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTPStats.SMTPClientFailures table The SMTPStats.SMTPClientFailures table contains logging data about errors/usage for the SMTP Services in VPOP3. These are used for the Intrusion Protection facility & logging. Columns * id - sequential ID for the event * ipaddress - the SMTP client's IP address

Allow messages through from a specific IP address

Anonymous (anonymous@undisclosed.example.com) — 2022-01-25T11:59:27+00:00

Allow messages through from a specific IP address This script allows messages through the spam filter if they arrive at VPOP3 from a specific SMTP sender (only when the message is sent directly to VPOP3 using SMTP, not via another server). Add the following to the spamrules_userlocal.txt file. This script file gets processed on all messages.

Spamrules example - increase spam score for long sender domain

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spamrules example - increase spam score for long sender domain This script is for the case where you to increase the spamminess of emails where the sender's email address contains a long domain. In this case we'll say if the sender's domain has 20 or more characters in the first section (between the @ and first .). Note that we do not necessarily recommend that you do this as it is not a very good indicator of spam, but it is something we've been asked for, so here it is.

Spam Filter Rules: ForEach

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spam Filter Rules: ForEach Statement ForEach Version 2.1.7+ Purpose Causes a loop to be run through for all values within specified criteria The ForEach statement requires either two or three parameters (depending on the type of loop that is being conducted), in the format

Spam Filter Rules: Variables

Anonymous (anonymous@undisclosed.example.com) — 2023-08-14T16:01:01+00:00

Spam Filter Rules: Variables The VPOP3 spam filter script language supports simple variables. In most places these are specified as ${}, but in some places they are just specified as - for instance where a statement always puts its result into a variable.

User Routing Script

Anonymous (anonymous@undisclosed.example.com) — 2023-03-27T10:32:18+00:00

User Routing Script If there is a /user_redirect.lua script, this Lua script can override VPOP3's message routing options. You can edit this either in the Settings -> Scripts page in the settings, or via the 'Routing' tab in the user's settings in the VPOP3 administration console. This script affects how VPOP3 will handle how messages

Users

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Users The Users page shows the list of users, as well as giving you some actions which you can perform use the user list. * Import users from file * Import users from Windows * Export users to file * Bulk Add Users * Edit User Welcome Message * Send Admin Message * Edit a User User List Outgoing Messages Just above the main user list is an entry Outgoing Message Queue. Clicking on this will let you see which messages are waiting to be sent out, and you can delete/

Users.Autoresponders table

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Users.Autoresponders table The Users.Autoresponders table contains the users' autoresponder definitions Columns * autoresponderid - this is a numeric id of the autoresponder entry (primary key) * owneruser - this is the numeric id of the user which the autoresponder belongs to (or 0 for a 'template' autoresponder)

VPOP3 Webmail Help

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

VPOP3 Webmail Help Webmail is a way of accessing your mail using a normal web browser. It is designed to be close in functionality to a 'normal' email client, so should be straightforward to use. If you use VPOP3 Enterprise, then the mail visible through the web browser will be the same as that visible through your IMAP4 email client - the IMAP4 client will synchronise with Webmail.

VPOP3.GetMessages Lua function

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

VPOP3.GetMessages Lua function The Lua management function 'VPOP3.GetMessages' retrieves a table containing all the mail messages in a specified folder. VPOP3.GetFolders(username, folder); * username is the username from VPOP3.GetUsers * folder is the folder from VPOP3.GetFolders It returns a table where the key is the message UID and the value is a table of:

VPOP3.SendMessage

Anonymous (anonymous@undisclosed.example.com) — 2021-08-09T10:58:46+00:00

VPOP3.SendMessage The Lua function 'VPOP3.SendMessage' sends a text email message It takes four parameters: * The email address of the sender * The email address of the recipient * The subject line * The message body The function returns one value:

Webmail -> Advanced tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Webmail -> Advanced tab This page is reached from Services -> Webmail Server, then the Advanced tab. Here you can set various options for the VPOP3 Webmail/settings service. Allow Password in URL If you check this option, then you can specify the user's password in a

OutMsgIP Replacement

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

OutMsgIP Replacement Use: ~outmsgip~ Required parameter: MsgID This returns the sender IP address of the specified message in the VPOP3 out queue.

OutMsgRecipients Replacement

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

OutMsgRecipients Replacement Use: [~outmsgrecipients~] Required parameter: MsgID This returns a JSON array containing details on the recipients for the specified message in the VPOP3 out queue. There is one object returned per recipient, and the object is:

GDPR for hosted VPOP3 service

Anonymous (anonymous@undisclosed.example.com) — 2025-10-14T15:43:01+00:00

GDPR for hosted VPOP3 service (Since Brexit, the UK has “UK GDPR” instead of “EU GDPR”, so this document refers to UK GDPR) Also see GDPR for VPOP3 as most of that applies to the VPOP3 hosting service as well. This Data Processing Agreement is part of our hosted VPOP3 service terms. You can view the revision history by clicking on the 'clock' icon to the right.

SMTP Relay Service FAQ

Anonymous (anonymous@undisclosed.example.com) — 2021-06-29T08:35:43+00:00

SMTP Relay Service FAQ We provide an SMTP Relay Service for many of our customers. The price starts from £40 (+VAT if applicable) per year, for up to 5000 messages, or 750MB, per month. How do I order the SMTP Relay Service? To order the SMTP relay service, either email

What is Webmail?

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

What is Webmail? “Webmail” is a term used to describe an email client which is accessed through a web page rather than as a standalone program. Some well known services which offer webmail are services such as Hotmail, Yahoo, Gmail etc. All versions of VPOP3 have a Webmail service included as standard.

450 4.3.2 Content Filter Timeout

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

450 4.3.2 Content Filter Timeout If you get this error appearing when messages are sent to VPOP3, either in a bounce message, or in the VPOP3 status monitor, it means that the VPOP3 computer filter is taking more than the allowed amount of time (usually 60 seconds).

Socket Error 11001 - Host not found (authoritative answer)

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Socket Error 11001 - Host not found (authoritative answer) This means that the ISP POP3 or SMTP server which you have told VPOP3 to connect to does not currently exist. This might be that you have mistyped the server address, or that your ISP is having temporary problems, or that you are using an internal

Socket Error 11002 - Host not found (Non-Authoritative answer)

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Socket Error 11002 - Host not found (Non-Authoritative answer) This means that VPOP3 is not getting a response from a DNS server when it is trying to look up the name of the ISP's mail server(s). Usually this means that Windows either does not know the address of a valid

Calendars in Mozilla Thunderbird

Anonymous (anonymous@undisclosed.example.com) — 2022-01-26T10:47:35+00:00

Calendars in Mozilla Thunderbird The Thunderbird email client supports CalDAV calendars as standard. This can be used to access VPOP3's CalDAV server. To add a VPOP3 CalDAV calendar to Mozilla Thunderbirdis straightforward * Add the calendar to Thunderbird

Calendars on eM Client

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Calendars on eM Client If you have used CalDAV calendars on Mozilla Lightning/Sunbird, then the eM Client configuration is quite different, but simple. To add a CalDAV account to eM Client * Go to Tools -> Accounts * Click New Account... * Open the

Copy Outgoing mail

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Copy Outgoing mail Sometimes people need to copy outgoing mail for various reasons. There are several ways of doing this in VPOP3 depending on your exact requirements: * Message Monitoring - this copies all outgoing, incoming and/or internal mail sent by/to specific users to another specific user

How to Create a Connection

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to Create a Connection There are two ways that VPOP3 can be configured to connect to the Internet. Which one you use depends on the service provided by your ISP. Using a Permanent 'Always On' Connection This is the most common connection method. It assumes you are connecting to the Internet via a router which is permanently connected. In this scenario VPOP3 simply needs to connect to the router so setting up VPOP3 is very simple.

Daily Summary is not reporting all Sent messages

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Daily Summary is not reporting all Sent messages For VPOP3 to log outbound messages it needs to be able to work out that the message is FROM: a user whose mail is handled by the local VPOP3. To do this it has to examine the FROM: address in the message header.

Anonymous (anonymous@undisclosed.example.com) — 2026-03-26T13:23:43+00:00

How To Encrypt Sessions

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How To Encrypt Sessions VPOP3 Enterprise 2.6 and later supports SSL/STARTTLS encrypted sessions to VPOP3 itself. So, the email client or web browser will encrypt the data passed to VPOP3 so it cannot be intercepted. This requires an SSL Certificate to be created for VPOP3.

Installation conficts

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Installation conficts During installation, the installer program does some basic checks for conflicting software. This is software which is providing the same services as the VPOP3 software - i.e. SMTP, POP3 and/or LDAP services. For POP3/SMTP it will show the text which the conflicting software announces itself as.

How to limit size of sent mail

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to limit size of sent mail There are several ways to limit the size of mail which can be sent * Limit the size of mail accepted by the SMTP component of VPOP3 * Limit the size sent for a particular user * Limit size based on 'rules' * Limit size based on

How To: Move VPOP3

Anonymous (anonymous@undisclosed.example.com) — 2019-11-12T16:09:34+00:00

How To: Move VPOP3 You can usually move VPOP3 without having to uninstall and reinstall. It is best to move VPOP3 rather than reinstalling from scratch on the new PC or in the new location, because that way you can keep all your existing settings, rather than having to try to recreate them.

MX Send Warning - .....

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

MX Send Warning - ..... If you see the text 'MX Send Warning - ' in the VPOP3 status monitor, that means that VPOP3 is trying to send a message to another mail server using the MX send method (direct to the recipient's mail server) and

Outlook/Windows Messaging reports "No transport provider is available"

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Outlook/Windows Messaging reports "No transport provider is available" If Outlook or Windows Messaging reports No transport provider is available when trying to connect to VPOP3, it can mean several things. (This must be a contender for “the world's most meaningless error message

Not Working As Expected

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Not Working As Expected This is the page to come to if you think you've set something up correctly but it isn't doing what you think it should be doing. If you're getting an error message or some other concrete indication that something has actually 'gone wrong' then the

Obtaining Windows Event Log

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Obtaining Windows Event Log Sometimes, the VPOP3 technical support team may need to see entries from the Windows Event log, especially those relating to VPOP3 or the PostgreSQL service. If there are too many entries simply to copy, you can save them to a file to email to technical support.

VPOP3 - POP3 Client Connection Problem

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

VPOP3 - POP3 Client Connection Problem These errors occur during the period when VPOP3 is trying to establish a connection to your ISP's POP3 mail server to receive incoming mail. They can mean that you have entered the POP3 Server address incorrectly, or that there is a problem with the network, or that your ISP's mail server is not working properly.

RBL Checking not working in VPOP3 Enterprise

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

RBL Checking not working in VPOP3 Enterprise VPOP3 Enterprise has an RBL checking feature which is configured in the VPOP3 Settings at Services -> SMTP Server -> SPAM Reduction -> Realtime Blacklist Rules If it does not seem to be working properly, there are a few reasons why the RBL feature may not work.

Redirect message for a user if a sender is a particular email address

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Redirect message for a user if a sender is a particular email address Say you want messages addressed to 'user1' to be redirected to 'user2' if they came from customer@domain.com This is an unusual requirement, so there is no way to do it in VPOP3.

VPOP3 - SMTP Client Connection Problem

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

VPOP3 - SMTP Client Connection Problem These errors occur during the period when VPOP3 is trying to establish a connection to your ISP's SMTP mail server to send outgoing mail. They can mean that you have entered the SMTP Server address incorrectly, or that there is a problem with the network, or that your ISP's mail server is not working properly.

Spanish Webmail Language File

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spanish Webmail Language File Copy/paste the text below to a file 'spanish.lng' or 'espanol.lng' in the VPOP3 directory. (Spanish users, feel free to update/correct the text below) #login page logintitle=VPOP3 Login webadminlogin=web admin login webmaillogin=web mail login enterusername=Especificar aca el usuario de Correo bookmarksnotsupported=Disculpe, pero su navegador no soporta esta funcion. loginfailed=Login Fallido - Favor reintente nuevamente invalidlogin=Detalles del login inválidos…

Transmission Receipt Message

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Transmission Receipt Message This is not an error message, but we are listing it here because it confuses some people. VPOP3 sends a 'Transmission Receipt' when a message is sent out, and it contains a header asking for the receipt. The default configuration is that it will send the transmission receipt if the sender asks for a read receipt.

Troubleshooting Tips

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Troubleshooting Tips Telnet One of the most basic, and useful, tools for troubleshooting email systems is a Telnet client. Installing Telnet Client Unfortunately, since Windows XP, Microsoft do not install the Telnet client into Windows by default, so you may need to install the Telnet client yourself.

Use Download Rules for incoming POP3 message filtering

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Use Download Rules for incoming POP3 message filtering If you have VPOP3 retrieving messages from a POP3 account on an ISP, then you can use Download Rules to do basic filtering on incoming messages. (If you have incoming SMTP, then use SMTP Rules instead) Download rules cannot perform all mail filtering tasks. For more features,

Move VPOP3 Version 5 (or later) to a new PC

Anonymous (anonymous@undisclosed.example.com) — 2026-04-21T11:12:40+00:00

Move VPOP3 Version 5 (or later) to a new PC Moving VPOP3 Version 5 or later to a new PC is slightly different from moving earlier versions, because of the database system, which was introduced for version 3 and modified for version 5. The summary of steps is: * Stop VPOP3 on the original PC

Error message: VPOP3 Alert - Non-existent user -

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Error message: VPOP3 Alert - Non-existent user - If you receive an error message like: Subject: VPOP3 Alert - Non-existent user - Delivery Failure Report. There was incoming mail for non-existent user "". This means that VPOP3 downloaded a message using POP3 and it was addressed to an email address which does not exist.

AutoresponderConditionList Replacement

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

AutoresponderConditionList Replacement Use: ~autoresponderconditionlist~ Required parameter: responderid - the ID of the autoresponder This returns a JSON structure containing an array of the rules associated with the specified autoresponder. The return structure is an array of objects containing:

Archive Script

Anonymous (anonymous@undisclosed.example.com) — 2023-03-25T23:33:31+00:00

Archive Script (from VPOP3 v6 onwards) Archive scripting lets you indicate whether full message content should be stored in the message archive. This could be used, for instance, for filtering out messages containing credit card details. The message headers will still be archived, along with the explanation text returned by the script.

Attachment Extraction Scripting

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Attachment Extraction Scripting This is the 'extraction.lua' script. (Added in V6.17) This script has one functions: * Extract This functions is called if the attachment extraction is enabled in Settings -> Attachment Processing -> Extraction.

IDS Log Event Numbers

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

IDS Log Event Numbers The VPOP3 SMTP IDS logging facility logs SMTP events in a form which may be useful to Intrusion Protection Systems, or security monitoring software. One of the fields in the log file is the Log Event Number These are: * 0 = SMTP authentication failure

Settings -> Local Mail -> General

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Settings -> Local Mail -> General The Local Mail -> General page allows you to configure a few simple, but fundamentally important settings. Default Domain In the majority† of cases, this is the domain name that VPOP3 will use when sending automated messages; for instance, users may receive a message from

LogDB.Messages table

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

LogDB.Messages table The LogDB.Messages table contains a record of all messages logged by VPOP3. A message is logged when a message is sent/received/etc. Columns * msgid - this is a bigint sequential value which identifies the message uniquely in the database

LogDB.Recipients table

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

LogDB.Recipients table The LogDB.Recipients table contains a record of the recipients for messages logged by VPOP3. A message may have one or more recipients Columns * rcptid - this is a bigint sequential value which identifies the recipient uniquely in the database

LogDB.Sessions table

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

LogDB.Sessions table The LogDB.Sessions table contains a record of all 'sessions' logged by VPOP3. A session is something like a POP3 server session as an email client downloads messages, or an SMTP client session as VPOP3 sends a message out to the Internet, and so on.

POP3 Client Lua Scripting

Anonymous (anonymous@undisclosed.example.com) — 2023-08-16T07:48:01+00:00

POP3 Client Lua Scripting The POP3 Client Lua Script is called POP3CLT.LUA and is edited in Settings -> Scripts. This script is called whenever VPOP3 runs a POP3 session to download messages from a remote POP3 server. VPOP3 will call the following Lua functions in the script at the following times:

Misc -> DNS Tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Misc -> DNS Tab Settings -> Misc Settings -> DNS The DNS tab lets you specify which DNS servers VPOP3 will use. DNS (Domain Name System) is a system which converts Internet host names (eg www.google.com) into a numeric IP address (eg 1.2.3.4), because all connections on the Internet are actually performed using numeric IP addresses, but it is easier for people to remember names.

msgaudit Database table

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

msgaudit Database table This can (optionally) contain data showing how messages have been handled (eg deleted, moved, etc) * id - incrementing ID of msgaudit entry * datetime - the date & time the event occurred * component - which VPOP3 component performed the event

New message tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

New message tab The New message tab within VPOP3 webmail is where you prepare, edit and send messages, including replies and forwards. As you can see from the screenshot, the page is divided into two main sections: Menu bar General tab bar Status bar [New message tab - VPOP3 Version 5 Webmail] Page structure New message toolbar

POP3 Server -> General Tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

POP3 Server -> General Tab Services -> POP3 Server -> General tab This page sets the general settings for the POP3 service component in VPOP3. The POP3 service is how users collect their email from VPOP3 using a POP3 email client Service Name The Service Name is a name you give the service for your reference. It is only used in administrative displays and logging, so the name doesn't matter. Most people leave it at the default.

Spamfilter Quarantine Viewer

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spamfilter Quarantine Viewer Settings -> Spamfilter -> Quarantine Viewer The Quarantine Viewer lets you see messages which have been quarantined by the VPOP3 Spam Filter. As an administrator you can see quarantined messages for any user, and release them if appropriate. If you release a message, it will be sent into the original recipient's Inbox, not into your Inbox.

Settings

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Settings * Admin Settings * Anti-virus * Attachment Processing * Autoresponder Settings * Database * Diagnostics * FaxServer * Global Address Book * Global Signature * Groups * Header Processing * Receipts/Urgent Messages * Global Header Modifiers * Legacy Extensions * Listserver Settings * Local Mail * General * Domain Mappings * LAN Forwarding * Configuration * Queue Status * Logging * Message Archive * Message Monitoring * Misc Se…

Mail Connectors -> Mail Senders -> SMTP Direct

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Mail Connectors -> Mail Senders -> SMTP Direct VPOP3 can be configured to send mail directly to the recipient's mail server (or the recipient's mail service provider). Usually this is only used if you have a high-end business class Internet connection - such as a leased line, or your mail server is co-located in a data centre. Attempts to use SMTP Direct sending on a dial-up/ADSL/Cable/FTTC/etc connection may be problematic since the receiving mail server may think you a home user who has been …

SMTP Server -> Spam Reduction

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTP Server -> Spam Reduction The Spam Reduction tab lets you configure various ways VPOP3 can reduce spam and email address spoofing Domainkeys “Domainkeys” is a way of signing a message to show that it comes from the person it claims to come from. The system is too complex to go into here, but it essentially takes key parts of the message header, as well as the message body and creates a PKI digital signature on it, using a 'private key' on your system. The receiving end will find the same…

SMTP Service -> VRFY/EXPN Tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTP Service -> VRFY/EXPN Tab Services -> SMTP Server -> VRFY/EXPN Tab VRFY and EXPN are SMTP commands which allow another computer to verify email addresses without sending mail to them. See RFC 5321 for technical details. Usually, these commands should be disabled for security purposes, but some other software may be able to use these commands for various reasons. In this case, you can enable them, but restrict access to the IP address(es) you trust.

Spam Filter Rules

Anonymous (anonymous@undisclosed.example.com) — 2023-01-18T15:57:13+00:00

Spam Filter Rules VPOP3 Versions 2.1.7 and later have a built-in spam filter system which supports a simple script language optimised for content- and spam-filtering of email messages. This reference contains a definition of the spam filtering script language supported by VPOP3. Note that as later versions of VPOP3 are released, more language features may be added, so this reference indicates in which version of VPOP3 a particular feature was added.

Spamfilter Script Configuration tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spamfilter Script Configuration tab You reach this tab by going to Settings --> Spam Filter -> General, and then choose the General tab. The Spamfilter script has various settings that can be changed to alter the behaviour of the spamfilter. These are defined in the script, so may change with different versions of the script. The settings are currently:

Increase the spam score for certain recipients

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Increase the spam score for certain recipients This script is for the case where you want certain recipients to have a weighted score. For instance if you have users who have left and who mostly receive spam, but you don't want to reject their mail totally.

Spam Filter Rules: IfMatch

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spam Filter Rules: IfMatch Statement IfMatch Version 2.1.7+ Purpose Allows you to perform a regular or substring match on a variable or part of the message being processed IfMatch statements require a data parameter and a search value, in the format

Spam Filter Rules: Redirect

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spam Filter Rules: Redirect Statement Redirect Version 2.1.7+ Purpose Remove all original recipients, and send the message to the specified recipient (and optionally folder) Examples To redirect the message to the Postmaster user's inbox Redirect Postmaster

Spam Filter Rules: SURBL

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spam Filter Rules: SURBL Statement SURBL Version 2.1.7+ Purpose Allows a SURBL lookup on the specified hostname or IP address in the specified SURBL zone, and returns the result into the specified variable The SURBL statement requires a hostname, SURBL zone and variable name, in the format

User Manager Script

Anonymous (anonymous@undisclosed.example.com) — 2024-04-22T08:37:38+00:00

User Manager Script If you want people to be able to log in using a different username than their VPOP3 username (eg if you want them to be able to log in using an email address), then you can use the UserManager Lua script The Lua script is managed through the Settings → Scripts page in VPOP3 v8.0 and later and is called 'UserManager.LUA.

Permissions

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Permissions This section lets you configure the permissions that a particular user has. Allowed Protocols The Allowed Protocols section lets you specify which services this user has access to. Note that these settings affect access to the whole service. If you want users to be able to access a service from some IP addresses, but not from others, then use the

User Routing Options

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

User Routing Options Assistant The assistant for a user is an email address (or set of email addresses, separated by semicolons) where incoming messages to this user will be copied or redirected. Normally messages will be copied to the assistant, but if the

Problems accessing the VPOP3 settings

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Problems accessing the VPOP3 settings There are several ways to access the VPOP3 settings. The most common are through the VPOP3 Status Monitor task tray icon, or the Windows Start menu (Start -> Programs -> VPOP3 -> Configure VPOP3). You can also go directly to the VPOP3 settings in your web browser, by going to