https://wiki.pscs.co.uk/ 2026-05-06T08:38:34+00:00 https://wiki.pscs.co.uk/ https://wiki.pscs.co.uk/_media/wiki:dokuwiki.svg text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:vpop3_status_monitor_problems?rev=1542192349&do=diff VPOP3 Status Monitor Problems The VPOP3 Status Monitor is the program which shows the little (usually red) postbox icon in the Windows task tray. This usually launches automatically from the Windows startup group. This program is VPOP3Status.EXE on the disk, or can be run manually from text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:ping_test?rev=1542192349&do=diff The ping command is a useful way of diagnosing network problems. It's similar to the sonar ping in a submarine. It sends out a signal to a specified machine and waits for a response to be echoed back. * Open a command prompt * Type ping www.pscs.co.uk. You should see a display like this: text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:undelete?rev=1542192349&do=diff Undelete Messages in VPOP3 Enterprise v5 or later If a user accidentally deletes messages or a message folder, you can easily undelete this within a few days. The amount of time that messages are stored in the VPOP3 'recycle bin' is set in Settings text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:use_the_vpop3_status_monitor?rev=1542192349&do=diff How to use the VPOP3 Status Monitor The VPOP3 Status Monitor is a small program which displays a postbox icon (usually red) in the Windows notification area (usually at the bottom right of the screen - by the clock). This icon can be used for quick access to various VPOP3 facilities. Note that the Status Monitor is text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:backup_vpop3?rev=1542192349&do=diff How to Backup VPOP3 By default VPOP3 v3 and later will automatically perform a daily backup of the database into a file called DBBACK-x.DMP, where the backup file rotates on a weekly basis (DBBACK-0.DMP is Sunday's backup, DBBACK-1.DMP is Monday's backup, etc). text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:restricting_number_of_email_recipients_sent?rev=1542192349&do=diff Restricting the number of recipients sent to Some ISPs set restrictions on the number of recipients that you are allowed to send in a certain time period, eg 50 messages per hour, or the number of recipients that you are allowed to send per message or per connection. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:training_the_spam_filter?rev=1542192349&do=diff Training the VPOP3 Spam Filter The VPOP3 spam filter has a couple of mechanisms which can be used to 'train' it to distinguish between spam and not-spam. Bayesian Filter The Bayesian filter this looks at words in messages sent and received and their probabilities of being contained in spam and not-spam, and works out an overall probability of the message being spam or not-spam based on the combination of those probabilities. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:450_4.3.2_content_filter_timeout?rev=1542192349&do=diff 450 4.3.2 Content Filter Timeout If you get this error appearing when messages are sent to VPOP3, either in a bounce message, or in the VPOP3 status monitor, it means that the VPOP3 computer filter is taking more than the allowed amount of time (usually 60 seconds). text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:10060?rev=1542192349&do=diff Socket Error 10060 - Operation Timed Out This error is quite self explanatory. It means that Windows reported that a connection attempt or idle connection timed out. If this error occurs during a connection attempt (eg in a VPOP3 - SMTP Client connection problem error message), then it means that Windows couldn't connect to the ISP mail server within a fixed time (the timeout limit is fixed within Windows itself). This problem can either mean that your ISP is having a problem, that you are con… text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:don_t_download_big_messages_during_the_working_day?rev=1542192349&do=diff Don't download big messages during the working day using Download Rules Say you don't want to download messages over 10,000,000 bytes long between 8:00am and 6:00pm. To do this, create a download rule as: * Rule Type: Ignore * Match Type: All Conditions text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:err_mailbox_locked?rev=1542192349&do=diff -ERR Mailbox Locked error If your email client displays an '-ERR Mailbox Locked' or '-ERR [IN-USE] Mailbox Locked' error when trying to log into VPOP3 it means that the mailbox is locked. The POP3 standard requires that POP3 mailboxes have an 'exclusive lock' on them when they are in use. This means that only one POP3 client can access the mailbox at once. Also, if a POP3 mailbox is currently accessing a mailbox, then no IMAP4, Webmail or administrator access is allowed to the mailbox at the s… text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:error_message_handling?rev=1542192349&do=diff Error Message Handling VPOP3 will normally send an error message to the Main Administrator every time it encounters an error. We recommend you leave it like this in most cases - if an error message occurs repeatedly, then it usually means there's an underlying problem which needs resolving rather than ignoring. text/html 2019-11-08T15:37:52+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:upgrade_vpop3_to_version_5?rev=1573227472&do=diff How To Upgrade VPOP3 to version 5 or later Upgrading VPOP3 is usually a straightforward process. Download VPOP3 from our web site and back up your current installation just in case something goes wrong. Then simply run the installer that you downloaded and install it over the top of your existing VPOP3. All your settings and mail will be preserved. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:your_connection_has_been_blocked_temporarily_-_try_again_later?rev=1542192349&do=diff Error message: Your connection has been blocked temporarily - Try again later If you get an error message in your email client software saying Your connection has been blocked temporarily - Try again later or Server access temporarily blocked! Please try again later text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:french_webmail_language_file?rev=1542192349&do=diff French Webmail Language File Copy/paste the text below to a file 'french.lng' or 'francais.lng' in the VPOP3 directory. (French users, feel free to update/correct the text below) #login page logintitle=VPOP3 Login webadminlogin=web admin login webmaillogin=web mail login enterusername=You must specify your VPOP3 username here bookmarksnotsupported=I'm sorry, but your web browser does not support this function. You will have to add this page to your bookmarks manually. loginfailed=Login Faile… text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:obtaining_error_logs?rev=1542192349&do=diff How to Obtain Error Logs As part of diagnosing a support issue our support team may ask you to send them various log files. This page explains how to obtain the right files at the right time. How Logging Works Under its default settings VPOP3 logs a minimal amount of information about what it is doing to various files in the main VPOP3 directory. When investigating a support issue it is often the case that we will need you to switch on logging to extra files or increase the level of detail be… text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:performance_requirements?rev=1542192349&do=diff Performance Requirements The performance requirements for VPOP3 depends on many factors, so we can't give specific details for any scenario. How to detect limiting factors * Use the Windows Performance Monitor (perfmon.msc) * Add counters for: text/html 2024-01-15T11:35:45+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:repairing_corrupted_database?rev=1705318545&do=diff Repairing corrupted database With PostgreSQL (as with most high-end databases) the database system will automatically recover after power failures etc, if it can. If it can't then there is no manual 'repair' function, because the data cannot totally be recovered (or it would automatically have been recovered). text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:restore_a_backup_of_vpop3?rev=1542192349&do=diff How to Restore a backup of VPOP3 The instructions below are to restore a full backup. You may also be able to recover deleted messages if you do not need to restore a full backup. Version 5 or later If you just need to restore a database backup, see steps 4 to 7 below. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:restricting_number_of_messages_sent?rev=1542192349&do=diff Restricting the number of messages sent Some ISPs set restrictions on the number of messages that you are allowed to send in a certain time period, eg 50 messages per hour, or the number of messages that you are allowed to send per connection. Restriction of messages per connection text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:too_many_logins?rev=1542192349&do=diff "Too many logins" error message VPOP3 version 4 and later have a limit on the number of concurrent logins which can be received for a single user or from a single IP address. This is to prevent a single user from bringing the server down. The current default limits are 20 per user, or 1000 per IP address (to allow multiple people sharing a NAT IP address) text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:550_not_permitted?rev=1542192349&do=diff 550/553 Not Permitted error from BT Internet's mail servers BT Internet's mail servers only allow messages to be sent from 'approved' email addresses. If you try to send messages from other addresses BT's mail servers may return a '550 Not Permitted' error, a '553' error, or may silently discard the message depending on what their server feels like doing today. text/html 2025-08-18T15:28:11+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:configure_srs?rev=1755530891&do=diff Configure SRS In VPOP3 8.8 and later, you can use Lua scripting to implement 'SRS' (Sender Rewriting Scheme') in VPOP3 This involves adding a couple of functions to rewrite outgoing return paths in 'relayout.lua' or 'mxout.lua' as appropriate and a couple of functions to redirect rewritten bounce message recipients in 'smtpsvr.lua' text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:database_maintenance?rev=1542192349&do=diff Database Maintenance VPOP3 uses the PostgreSQL database server for most of its data storage. Normally this will not require any special maintenance, because it will manage itself. To do any special database maintenance you will need to close down VPOP3 first, because PostgreSQL needs exclusive access to the database to perform any operations such as decreasing the size of database files. Note that these operations may take some time! There are some PostgreSQL utility programs in the VPOP3\pgs… text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:delete_outqueue_messages_directly_from_the_database?rev=1542192349&do=diff Delete OutQueue messages directly from the database If there is an extremely large number of messages (eg hundreds of thousands) in the VPOP3 OutQueue, then it may take a very long time for VPOP3 v5 and later to start as it check the message database tables for consistency during initialisation. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:estimate_db_upgrade_time?rev=1542192349&do=diff How to estimate Database Upgrade Time When upgrading from VPOP3 version 3 or 4 to version 5, the PostgreSQL database engine needs to be upgraded. This involves backing up the database data, upgrading the database engine, then restoring the data. This can take some time on large databases. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:german_webmail_language_file?rev=1542192349&do=diff German Webmail Language Page Copy/paste the text below to a file 'german.lng' in the VPOP3 directory. (German users, feel free to update/correct the text below) #login page logintitle=VPOP3 Login webadminlogin=web admin login webmaillogin=Webmail Anmeldung enterusername=Sie m&uuml;ssen einen Benutzernamen angeben bookmarksnotsupported=I'm sorry, but your web browser does not support this function. You will have to add this page to your bookmarks manually. loginfailed=Anmeldung fehlgeschlagen … text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:incoming_smtp_feed?rev=1542192349&do=diff Incoming SMTP Feed An incoming SMTP feed is where incoming mail is sent directly to your mail server without going through your ISP's POP3 mail server on the way. Advantages An incoming SMTP feed has several advantages over going via a POP3 mailbox: text/html 2021-03-08T10:48:40+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:install_vpop3?rev=1615200520&do=diff How to Install VPOP3 Simply download VPOP3 from the website, and run the installation program and follow the prompts. Occasionally people may have problems with the PostgreSQL part of the installation. If that happens, please contact us either by email at support@pscs.co.uk or by phone to +44 (0)1484 855800, and we will do our best to help. text/html 2026-04-06T17:59:47+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:mail_not_downloading_from_isp?rev=1775498387&do=diff Mail Not Downloading From ISP This normally happens because you have told VPOP3 to Leave Messages On Server (on the Mail Connectors -> Mail Collectors -> (name) -> POP3 General tab). If you do this, VPOP3 will leave messages on the ISP's mail server for several days, and remember that it has already downloaded them. Then, the next time it connects it will see that there are some messages waiting, but it may find that it has already downloaded them, so it won't download them again. text/html 2026-04-06T17:57:00+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:make_vpop3_redownload_messages_from_isp?rev=1775498220&do=diff How to make VPOP3 re-download POP3 messages from the ISP If you have the VPOP3 Mail Collector setting Leave Mail On Server enabled, then VPOP3 will leave your messages on the ISP POP3 server for the specified number of days after downloading it. If, during this time, you want to make VPOP3 download those messages again, then you can do so. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:outlook_outlook_express_are_sending_mail_repeatedly?rev=1542192349&do=diff Outlook / Outlook Express is sending mail repeatedly If you are using Outlook or Outlook Express you may occasionally find that mail is being sent repeatedly. There are a couple of possible reasons for this which we know of Sending taking too long text/html 2025-09-11T13:48:07+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:recovering_messages_from_corrupted_database_into_fresh_database?rev=1757598487&do=diff Recovering messages from corrupted database into fresh database If the VPOP3 message database is corrupted, then one option is to build a fresh database and restore the settings into it, then recover the messages from the old database using the 'Message Restore' function in VPOP3. This has minimal downtime, but old messages will not all be available until the restore has completed. New messages will be available quickly, and you will be able to send messages. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:seeing_where_a_message_came_from?rev=1542192349&do=diff Seeing where a message came from Sometimes you need to check to see where a message really came from. The 'From:' email address is easily forged, so that cannot be relied upon. The first thing you have to do is to get the full message headers. These may look daunting, but are very useful for problem diagnosis. text/html 2020-07-22T10:32:40+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:signing_outgoing_mail_with_dkim?rev=1595413960&do=diff Signing outgoing mail with DKIM DKIM, also known as DomainKeys Identified Mail, is a form of email authentication that digitally signs emails to prove that they were sent from authorized domains and aren't fake emails. Companies like Google and Yahoo use DKIM to sign their emails and it is becoming ever more popular. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:spanish_webmail_language_file?rev=1542192349&do=diff Spanish Webmail Language File Copy/paste the text below to a file 'spanish.lng' or 'espanol.lng' in the VPOP3 directory. (Spanish users, feel free to update/correct the text below) #login page logintitle=VPOP3 Login webadminlogin=web admin login webmaillogin=web mail login enterusername=Especificar aca el usuario de Correo bookmarksnotsupported=Disculpe, pero su navegador no soporta esta funcion. loginfailed=Login Fallido - Favor reintente nuevamente invalidlogin=Detalles del login inválidos… text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:timeout_while_vpop3db_is_starting?rev=1542192349&do=diff Timeout while VPOP3DB is starting (Note that VPOP3 v6.11 and later, the service startup system has changed so it should not suffer from this problem) When VPOP3DB starts up, the service control manager component waits a set time for a response from the database server before it knows the service has started. If the PC is going slow (eg after a Windows update or if the PC is just slow) then this wait may not be long enough. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:upgrade_licence_key?rev=1542192349&do=diff How to upgrade your VPOP3 licence You can purchase a VPOP3 upgrade by going to <http://www.pscs.co.uk/buynow/vpop3_upgrade.php> You will need to enter your current licence details, and the website will give you your upgrade options. If you want to upgrade the licence size or from VPOP3 Basic to VPOP3 Enterprise at the same time as upgrading to the latest version of VPOP3, then choose the 'Upgrade to the latest version' option, and you will be given further choices of licence upgrades you can … text/html 2020-09-03T15:07:34+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:upgrade_vpop3_to_version_8?rev=1599145654&do=diff Upgrading VPOP3 to version 8.x from v7 or earlier VPOP3 v8.x uses PostgreSQL 10 as its database engine, which is the latest supported 32 bit version of PostgreSQL. Later versions of PostgreSQL are 64-bit only, which means we cannot use them while continuing to support 32 bit versions of Windows. text/html 2019-11-12T16:09:08+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:v3_-_move_to_a_new_pc?rev=1573574948&do=diff Move VPOP3 Version 3 or 4 to a new PC Moving VPOP3 Version 3 or 4 to a new PC is slightly different from moving earlier versions, because of the database system. The summary of steps is: * Stop VPOP3 on the original PC * Manually make a backup of the database on the original PC text/html 2026-04-21T11:12:40+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:v5_-_move_to_a_new_pc?rev=1776769960&do=diff Move VPOP3 Version 5 (or later) to a new PC Moving VPOP3 Version 5 or later to a new PC is slightly different from moving earlier versions, because of the database system, which was introduced for version 3 and modified for version 5. The summary of steps is: * Stop VPOP3 on the original PC text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:vpop3_cannot_access_postgresql_-_timeout_expired?rev=1542192349&do=diff VPOP3 cannot access PostgreSQL - timeout expired This is an error which may be logged in the Windows event log It is event 4547 from the source 'VPOP3' If the event message DLL is not correctly installed it may display as: The description for Event ID ( 4547 ) in Source ( VPOP3 ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this desc… text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:vpop3_deleting_messages_as_old_messages?rev=1542192349&do=diff VPOP3 Deleting messages as 'old' messages If VPOP3 says 'deleting old message' in the status window activity log that means that it has seen the unique ID of that message before, longer ago than the time specified for VPOP3 to leave messages on the server, so it thinks that the message is an old message, and so deletes it. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:vpop3_not_starting_properly?rev=1542192349&do=diff VPOP3 Not Starting Properly If VPOP3 is not starting properly, then the first thing to check is whether the database server is starting. In VPOP3 v3 and later, VPOP3 uses a PostgreSQL Database server for data storage, so if the database server is not running, VPOP3 will not be able to start properly. In this case, the VPOP3.EXE process may appear in Task Manager, but it won't respond to anything, or it may appear in Task Manager and then stop after a short period. text/html 2026-01-05T09:31:47+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:vpop3_re-downloading_old_messages_from_isp_pop3_server?rev=1767605507&do=diff VPOP3 re-downloading old messages from the ISP POP3 server If you tell VPOP3's POP3 mail collector to leave messages on the ISP's server for a few days, you may find that sometimes VPOP3 will redownload all the messages from the ISP mailbox again. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:421_4.3.2_vpop3_smtp_server_access_disabled_-_low_memory?rev=1542192349&do=diff 421 4.3.2 VPOP3 SMTP Server access disabled - low memory! This error means that VPOP3 has detected that there is not enough free memory available on the server. If this happens it refuses to accept new messages because that may make the PC crash and possibly lose data. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:10053?rev=1542192349&do=diff Socket Error 10053 - An established connection was aborted by the software in your host machine. Error 10053 means that an established connection has been dropped. There are three descriptions of this error message we know about, but the descriptions are given by Windows, so they may vary depending on your version of Windows: text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:10503?rev=1542192349&do=diff Socket Error 10503 - No More Data Error 10503 means that the connection between VPOP3 and a remote computer (normally your ISP) was dropped at an unexpected time. This is different from the error 10054 in that this is a controlled line drop. One way this can happen is if the ISP's POP3 server uses an obsolete standard which allows it to drop the connection if a POP3 'LIST' command is performed on an empty mailbox. The current standard requires that the connection is not dropped until the clien… text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:alternative_method_of_automatically_starting_vpop3?rev=1542192349&do=diff Alternative method of automatically starting VPOP3 VPOP3 usually automatically starts as a Windows service. Sometimes this does not work, either because other services need to start first, or Windows is going very slowly at startup, causing the database service to time out, or there are certain database control files which did not get cleared after a previous Windows shutdown. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:android_-_stock_client?rev=1542192349&do=diff Android - Stock Client Warning If you use the stock email client from Android 4.x, then be VERY careful if you are using POP3 download. It appears that the stock client will download all the messages from your mail server every time it checks for mail, so you could use a text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:can_t_alter_dates_in_autoresponder_rules?rev=1542192349&do=diff Can't alter dates in Autoresponder Rules If you try to edit an Autoresponder Rule which has a start/end time set, you may notice that you can't edit the dates in there. This is because VPOP3 prevents you from setting it so that the “start date” is after the “end date text/html 2026-03-23T10:18:43+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:create_an_ssl_certificate?rev=1774261123&do=diff How to create an SSL Certificate VPOP3 Enterprise supports SSL certificates for encrypted sessions. The basic mechanism to create an SSL certificate is that you have to generate a CSR (Certificate Signing Request) then send that to a CA (Certificate Authority) who will sign your certificate and give you the certificate back. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:data_stream_contained_nul_character?rev=1542192349&do=diff Data stream contained NUL character Description of the problem NUL characters (bytes with value 0) are not allowed in email messages and should not be transmitted over POP3, SMTP or IMAP4 except in certain circumstances. If an attachment contains such a byte it must be encoded using text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:database_size?rev=1542192349&do=diff VPOP3 Database Size The VPOP3 directory is stored in the VPOP3\pgsql\data folder and subfolders. If you are concerned about the size of the VPOP3 database, there are several factors which may make the database larger than you would expect: * The VPOP3 database contains a lot more information than just messages in mailboxes. This can include settings, outgoing messages, historical logging information, statistical information for the spamfilter, information about archived messages, etc. Also,… text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:emptying_a_user_s_mailbox?rev=1542192349&do=diff Emptying a user's mailbox To empty a user's 'Inbox' folder, go to the VPOP3 settings. Then click on the Users tab at the top to go to the user list. In the user's list there will be a column displaying the number of messages in the user's Inbox folder. Just to the right of that will be an icon of a waste bin. If you click on that, you will delete all the messages in the user's Inbox folder. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:err_can_t_open_the_message_file_-_it_s_gone?rev=1542192349&do=diff -ERR Can't open the message file - it's gone! If VPOP3 receives the error message “-ERR Can't open the message file - it's gone!” from your ISP's POP3 server when it is downloading messages, this is a symptom of a fundamental bug in your ISP's POP3 server. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:isp_needs_pop3_before_smtp_authentication?rev=1542192349&do=diff The ISP needs POP3 before SMTP authentication Some ISPs (especially in Germany) require you to log on to collect your POP3 mail before they will allow you to send any mail through their SMTP relay servers. VPOP3 actually connects to the POP3 server and SMTP server at the same time, so usually it will not have successfully logged onto the ISP's POP3 server before it tries to start sending mail. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:moving_messages?rev=1542192349&do=diff How to move messages between users There are several ways to do this, depending on your exact needs Via Administrator Console You can view a user's 'Inbox' messages by clicking on the message count on the Users list, then select the messages, choose the target user, and press the text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:mozilla_thunderbird?rev=1542192349&do=diff How to configure Mozilla Thunderbird This article won't show you all the possible settings in Thunderbird, because there are so many. Thunderbird is one of the most powerful & flexible email clients available at the time of writing, especially if you use IMAP4 (with VPOP3 Enterprise). text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:mx_send_warning?rev=1542192349&do=diff MX Send Warning - ..... If you see the text 'MX Send Warning - <error message>' in the VPOP3 status monitor, that means that VPOP3 is trying to send a message to another mail server using the MX send method (direct to the recipient's mail server) and text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:no_transport_provider_is_available?rev=1542192349&do=diff Outlook/Windows Messaging reports "No transport provider is available" If Outlook or Windows Messaging reports No transport provider is available when trying to connect to VPOP3, it can mean several things. (This must be a contender for “the world's most meaningless error message text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:pop3_client_problem?rev=1542192349&do=diff VPOP3 - POP3 Client Problem These errors occur whilst VPOP3 is communicating with your ISP's POP3 mail server to retrieve your mail. The server connection was closed unexpectedly If the message text is Error with Pop3 Client (XXXX (YY)) The server connection was closed unexpectedly text/html 2019-02-06T17:10:31+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:postgresql_replication?rev=1549473031&do=diff PostgreSQL Replication PostgreSQL 9.1 (used in VPOP3 5 and later) supports replication from a 'Master' to a 'Slave' database server. This can be used with VPOP3 for having a near-realtime backup of your settings & messages. To use the replication, you need to have a file share which is accessible from both PCs. The thing to watch out for is that the PostgreSQL services may be running as a different user from the currently logged in user, so make sure that the user(s) which the PostgreSQL servi… text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:quarantine?rev=1542192349&do=diff Spam Quarantine By default, when the VPOP3 spam filter detects a message as being spam, it will go to the user's quarantine. Users can release messages from the quarantine by going to their webmail page and selecting the message from the quarantine list there. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:rbl_checking_not_working_in_vpop3_enterprise?rev=1542192349&do=diff RBL Checking not working in VPOP3 Enterprise VPOP3 Enterprise has an RBL checking feature which is configured in the VPOP3 Settings at Services -> SMTP Server -> SPAM Reduction -> Realtime Blacklist Rules If it does not seem to be working properly, there are a few reasons why the RBL feature may not work. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:sending_mail_from_different_email_addresses_or_domains?rev=1542192349&do=diff Sending mail from different email addresses or domains VPOP3 does not (by default) place any restrictions on which email addresses or domains you can send mail from. However, there may be external restrictions on which email addresses/domains you can send from. For instance, if you send mail through your ISP's mail server, they may only allow you to send mail from specific addresses, or the domain you send mail from may have a sender policy defined, such as text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:smtp_client_problem?rev=1542192349&do=diff VPOP3 - SMTP Client Problem These errors occur whilst VPOP3 is communicating with your ISP's SMTP mail server to send your mail. If the message text is: Error with SMTP Client (XXXX (YY)) The server connection was closed unexpectedly Then this means that the the connection between VPOP3 and your ISP's SMTP mail server was closed when VPOP3 did not expect it to be. This can be caused by the network connection failing or a bug in the ISP's mail server which drops the connection in abnormal circ… text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:timeout_problems_when_sending_or_receiving_attachments?rev=1542192349&do=diff Timeout problems downloading/uploading messages with attachments There are various possible reasons for this, usually to do with third party internet security software but they may also be associated with Windows TCP/IP or dial-up adapter issues. You may not have problems with other software, but that doesn't mean the problem is being caused by VPOP3. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:troubleshooting_tips?rev=1542192349&do=diff Troubleshooting Tips Telnet One of the most basic, and useful, tools for troubleshooting email systems is a Telnet client. Installing Telnet Client Unfortunately, since Windows XP, Microsoft do not install the Telnet client into Windows by default, so you may need to install the Telnet client yourself. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:upgrade_vpop3?rev=1542192349&do=diff How To Upgrade VPOP3 Note: if you are upgrading to VPOP3 version 5 or later from version 4 or earlier, please see How To Upgrade VPOP3 to version 5 Upgrading VPOP3 is a straightforward process. Download VPOP3 from our web site and ideally back up your current installation just in case something goes wrong. Then simply run the installer that you downloaded and install it over the top of your existing VPOP3. All your settings and mail will be preserved. text/html 2026-03-18T20:49:54+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:upgrade_vpop3_to_version_9?rev=1773866994&do=diff Upgrading VPOP3 to version 9.x from v7 or v8 VPOP3 v9 and later requires a 64 bit version of Windows 8.1 or later VPOP3 v9.x uses PostgreSQL 18 as its database engine. This can only easily be upgraded from PostgreSQL 9.3 or later, which means it must be an upgrade of VPOP3 v7 or later. If you are using an earlier version of VPOP3, then upgrade it to v8.7 first, then upgrade to v9 or later text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:use_download_rules_for_incoming_pop3_filtering?rev=1542192349&do=diff Use Download Rules for incoming POP3 message filtering If you have VPOP3 retrieving messages from a POP3 account on an ISP, then you can use Download Rules to do basic filtering on incoming messages. (If you have incoming SMTP, then use SMTP Rules instead) Download rules cannot perform all mail filtering tasks. For more features, text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:using_a_mobile_phone_with_vpop3?rev=1542192349&do=diff Using a Mobile Phone with VPOP3 Many people want to use a mobile phone to send/receive their email nowadays. This is usually easy to do with VPOP3. The recommended way is to have the phone connect directly to VPOP3 for sending/receiving email. To do this, you need to do three things: text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:v3_-_move_message_store?rev=1542192349&do=diff How to move the VPOP3 Message Store to a new PC Use this option if you want to have VPOP3 running on one PC, but have the message store database on another PC. Manually Install PostgreSQL on the new PC Download the 'pgInstaller' version of PostgreSQL from the text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:vpop3_is_responding_slowly?rev=1542192349&do=diff VPOP3 Is Responding Slowly If VPOP3 is responding slowly to users there are several common causes: * The VPOP3 server disk may be badly fragmented. Defragment the server disk(s). Note that sometimes the Windows defragmenter will say that the disk doesn't need defragmenting even if it does, so it is best to do it anyway. Also, there is a better free defragmenter available called