PSCS Wiki

Lua SMTP MX Control

Anonymous (anonymous@undisclosed.example.com) — 2026-02-24T15:49:48+00:00

Lua SMTP MX Control Every time VPOP3 is going to send messages using direct MX sending, it runs a script called mxout.lua which can be created/edited in Settings -> Scripts (or in the VPOP3 directory in VPOP3 v6.6 or earlier). Global Variables Starting with v8.8, the following global variables are defined:

Lua SMTP Relay Control

Anonymous (anonymous@undisclosed.example.com) — 2025-08-14T09:24:55+00:00

Lua SMTP Relay Control Every time VPOP3 is going to send messages via SMTP Relay, it runs a script called relayout.lua in the VPOP3 directory. Global Variables This script may have global variables, depending on your version of VPOP3. In VPOP3 3.0.0L and later, there are two read-only global variables set at the start of the script:

SMTP Server Lua Scripting

Anonymous (anonymous@undisclosed.example.com) — 2025-05-08T08:23:35+00:00

SMTP Server Lua Scripting The SMTP Server Lua Script is called SMTPSVR.LUA and can be edited from the Settings -> Scripts page in the VPOP3 settings. This script is called whenever an instance of the VPOP3 SMTP server is launched - ie whenever someone opens a connection to port 25 on the VPOP3 server to send it a message, whether from a local user or an incoming SMTP message.

Download Rules

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Download Rules Download rules are a facility in VPOP3 where it can look at message summary information before downloading a message from an ISP POP3 mailbox (they do not work on incoming SMTP messages - use SMTP Rules for that) To edit download rules, go to

LAN Forwarding Queue Status

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

LAN Forwarding Queue Status To view the LAN Forwarding Queue Status, go to Settings -> Local Mail -> LAN Forwarding -> Queue Status The LAN Forwarding Queue shows the messages which VPOP3 has currently got queued to be sent to another mail server on your network using SMTP. The LAN Forwarding Queue status page shows a simple list of the messages waiting to be sent. The four columns in the table show:

Mail Sender Advanced Settings

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Mail Sender Advanced Settings Mail Connectors -> Mail Senders -> (name) -> Advanced Advanced Domain Filtering For VPOP3 v6.11 and later, see the Domain Filtering section of the user manual. The Domain Filtering box lets you restrict which email messages are sent via this Mail Sender. You specify each rule on a separate line, and the message will be sent if it matches any sender rule

ListServer Commands

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

ListServer Commands The ListServer is an automated process in VPOP3 which manages mailing lists. People can send commands to the ListServer to perform various functions remotely. Whether these commands are allowed, and exactly how they work depends on the particular mailing list's settings.

Message Monitoring

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Message Monitoring Message monitoring in VPOP3 will tell VPOP3 to send a copy of all the outgoing, internal and/or incoming mail from/to specified users to be sent to another specified user. In the current versions of VPOP3, all monitored messages are sent to the same user (or list), you cannot specify different recipients for different monitored users. (This may be something that is added/enhanced in the future)

Outgoing Message Scripting

Anonymous (anonymous@undisclosed.example.com) — 2024-03-21T10:49:54+00:00

Outgoing Message Scripting Every time VPOP3 adds a message to the Outgoing mail queue, it runs a script called outmessage.lua. Scripts are stored as files in the VPOP3 directory in VPOP3 v6.6 and earlier, or managed through the Settings -> Scripts page in VPOP3 v6.7 and later.

Send Admin Message

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Send Admin Message It is possible for administrator users to send a bulk email message to an entire group or list. To begin composing an email, go to the Administration Settings -> Users page, and click Send Admin Message. This should then open a window, which allows you to specify various options.

Summary Log File Format

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Summary Log File Format VPOP3 creates a file called SUMMARY.LOG in the VPOP3 directory which contains summary information which is compiled daily into a daily summary reports sent to the administrator. VPOP3 can keep these summary logs in a subdirectory called

Autoresponders - v3 and v4

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Autoresponders - v3 and v4 This section lets you define an autoresponder for a user. An autoresponder is a message which is sent back in response to a message which arrives in this user's mailbox. The Autoresponder Type can be set to None, Simple Autoresponder

Lists

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Lists The Lists section in VPOP3 lets you view and manage the various types of 'List' which VPOP3 supports * Distribution Lists * Mailing Lists * Forwardings * ODBC Mailing Lists * Groups Using a list A list will contain zero or more 'members' (usually email addresses) which can be messaged all at once. To send a message to all the members of a list, you will usually send an email to the listname at a valid domain.

Misc -> External Fax Tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Misc -> External Fax Tab Settings -> Misc Settings -> External Fax The External Fax tab is for use with some external fax server applications which work by collecting mail from a POP3 mailbox. If a Fax Server Mailbox is selected, then VPOP3 will automatically send any locally sent mail to that mailbox if the recipient is local, but doesn't match another local address (a user, list, mapping etc),

POP3 Mail Collection

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

POP3 Mail Collection POP3 Mail Collection is when VPOP3 will collect mail from an external POP3 mailbox - for instance, from an Internet Provider. POP3 General This page tells VPOP3 how to collect mail. * POP3 Server Address - this is the name (or IP address) of the POP3 server from which you want VPOP3 to collect mail

SMTP Reputation Stats

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTP Reputation Stats (Added in v6.20) If you receive email by direct incoming SMTP (not via an ISP or filtering service) then you can tell VPOP3 to report sender reputation statistics back to VPOP3. This is enabled/disabled in the Settings -> Misc Settings page.

Spamfilter.Whitelist table

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spamfilter.Whitelist table The Spamfilter.Whitelist table contains the spamfilter whitelist entries which do not contain wildcards or regular expressions. They are separated out to speed up checking. Columns * address - this is the email address in the whitelist

Webmail Menu bar

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Webmail Menu bar The Webmail Menu bar within VPOP3 webmail enables you to quickly perform relevant actions. The Menu has six main headings; of which, three have multiple options. Option Active Function V Notes Message Mail and View Message tabs Opens/closes Message menu

Settings -> Attachment Processing

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Settings -> Attachment Processing The Attachment Processing page allows you to configure VPOP3 to perform two distinct functions on messages that contain attachments: * * Filtering The Filtering tab is divided into four main sections: Attachment Filtering

Autoresponder Commands

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Autoresponder Commands This article only applies to VPOP3 v4 and earlier A VPOP3 autoresponder can contain special text strings to create special behaviour, in addition to plain text as part of the response. There are three types of 'command' *

Mappings

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Mappings In VPOP3, Mappings are a way of explicitly linking an email address to a user or list. They can also be used to indicate that an email address is remote, even though it would otherwise appear to be a local email address. In other email servers, a similar feature may be called 'aliases'

Message Archive

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Message Archive The Message Archive facility is for VPOP3 to store copies of all messages sent or received. It stores the messages in a central archive store which can be searched by an administrator. The prime purpose of the archive facility is for recording messages in case of possible disputes, as you can see what was sent/received by email. It can also be used as a backup/restore facility in an emergency, but that is not its prime purpose, so it is better to have a proper

Misc -> Advanced Tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Misc -> Advanced Tab Settings -> Misc Settings -> Advanced You will normally not need to change any settings on this page unless VPOP3 technical support have suggested it. If you do make changes, and want to go back to the original settings, the Restore Defaults button will restore the settings to their defaults.

Mail Connectors -> Connector Schedule

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Mail Connectors -> Connector Schedule The Connector Schedule tells VPOP3 when to connect to send mail using Mail Senders and collect mail using Mail Collectors. It does not affect incoming SMTP over a permanent connection, or LAN Forwarding. The connection schedule also tells VPOP3 when to check for updates to the

SMTP Service -> Advanced Tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTP Service -> Advanced Tab Services -> SMTP Server -> Advanced Tab Refuse SMTP Connections from This setting should be rarely needed, and should be normally left blank. It is here for historic purposes. If you put some text in this box, then VPOP3 will refuse any SMTP connections from clients whose 'HELO'/'EHLO' command data contains the text specified here as a substring. Eg, if this setting is set to '.myisp.com', then VPOP3 would refuse SMTP connections from any client which sends the c…

SMTP Service - Filtering

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTP Service - Filtering The SMTP Server -> Filtering tab lets you set up filtering of messages going through the VPOP3 SMTP service. This may be incoming SMTP messages, or locally sent messages. SMTP Rules SMTP Rules let you create custom rules for processing messages as they go through the VPOP3 SMTP service.

Spam Filter Rules: ForEach

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spam Filter Rules: ForEach Statement ForEach Version 2.1.7+ Purpose Causes a loop to be run through for all values within specified criteria The ForEach statement requires either two or three parameters (depending on the type of loop that is being conducted), in the format

Permissions

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Permissions This section lets you configure the permissions that a particular user has. Allowed Protocols The Allowed Protocols section lets you specify which services this user has access to. Note that these settings affect access to the whole service. If you want users to be able to access a service from some IP addresses, but not from others, then use the

Error Handling Scripting

Anonymous (anonymous@undisclosed.example.com) — 2023-11-20T10:18:01+00:00

Error Handling Scripting For most error messages that VPOP3 generates, it allows control of error messages, eg to limit the frequency of error messages if they would be generated repeatedly. These limits are set in Settings -> Admin Settings -> Message Control. However, if you want more granular control, you can use Lua scripting for more fine-grained control

Global Signature

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Global Signature You can set a Global Signature in VPOP3 by going to Settings -> Global Signature The Global Signature option lets you tell VPOP3 to add a standard piece of text or HTML to the bottom of all outgoing messages. You can create just a plain text, or

IMAP4 Server Scripting

Anonymous (anonymous@undisclosed.example.com) — 2025-06-23T10:51:46+00:00

IMAP4 Server Scripting (Added in V6.12) DoCapability function When the IMAP4 CAPABILITY command is received, VPOP3 generates a capability string based on settings, then calls DoCapability(ipaddr, capabilities) * ipaddr = IP address of the client computer

Import Users From File

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Import Users From File VPOP3 supports the importation and exportation of users, via a CSV file (see for a specification of the CSV file format). NOTE: This process is not designed to provide a complete backup of user data, nor is it intended to facilitate moving VPOP3 to a new computer. Instead, see the following relevant pages:

Logging

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Logging Activity Summary Reports You can tell VPOP3 to send you a daily summary report each day. To do this check the box to say Send daily summary logs to, and choose the appropriate user (or “Main Administrator” if you want the reports to be sent to the

Lua SMTP MX Server Rules

Anonymous (anonymous@undisclosed.example.com) — 2026-02-24T15:50:03+00:00

Lua SMTP MX Server Rules Every time VPOP3 checks for remote MX server for sending messages using direct MX sending, it runs a script called mxserverrules.lua which can be created/edited in Settings -> Scripts (or in the VPOP3 directory in VPOP3 v6.6 or earlier).

Mail tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Mail tab The Mail tab within VPOP3 webmail enables you to manage your sent and received messages. As you can see from the screenshot, the page is divided into three main sections: Menu bar General tab bar Status bar [Mail tab - VPOP3 Version 5 Webmail] Page structure Mail toolbar The Mail toolbar contains the following buttons:

Message Headers

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Message Headers This article describes some of the headers which VPOP3 can add to messages. Note that some of these may be added by customisable scripts used by VPOP3, so may not match exactly, but the descriptions below are for the defaults distributed with VPOP3.

msgaudit Database table

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

msgaudit Database table This can (optionally) contain data showing how messages have been handled (eg deleted, moved, etc) * id - incrementing ID of msgaudit entry * datetime - the date & time the event occurred * component - which VPOP3 component performed the event

Quarantine tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Quarantine tab The Quarantine tab within VPOP3 webmail is where you view and manage messages that have been quarantined by VPOP3's spam filter. As you can see from the screenshot, unlike many of the other webmail tabs, it is not divided into multiple sections:

Spamfilter Quarantine Viewer

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spamfilter Quarantine Viewer Settings -> Spamfilter -> Quarantine Viewer The Quarantine Viewer lets you see messages which have been quarantined by the VPOP3 Spam Filter. As an administrator you can see quarantined messages for any user, and release them if appropriate. If you release a message, it will be sent into the original recipient's Inbox, not into your Inbox.

Reports

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Reports The Reports tab lets you access various reports about VPOP3 or message history. For many of reports to work, you need to have previously enabled historical logging. The currently available reports are listed below. To view a report, click on its name at the left of the page

Mail Sender Advanced Relay Settings

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Mail Sender Advanced Relay Settings SMTP Return Address The SMTP Return Address (or Return Path) is a hidden part of a message which says where bounce messages (and other automated responses) should be sent. (It is not the same as the Reply address

Sent message summary

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Sent message summary This will display the number of messages sent and total size over the past month. (It counts each recipient as its own message). You must have Historical Logging enabled in VPOP3 (Settings -> Logging) At a command prompt in the VPOP3 directory run

SMTP -> General tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTP -> General tab This page is reached from Services -> SMTP Server, then the General tab. This page lets you set general settings for the SMTP service component of VPOP3. The SMTP service is how users send outgoing mail, and how incoming SMTP messages arrive. Service Name

Spam Filter Rules

Anonymous (anonymous@undisclosed.example.com) — 2023-01-18T15:57:13+00:00

Spam Filter Rules VPOP3 Versions 2.1.7 and later have a built-in spam filter system which supports a simple script language optimised for content- and spam-filtering of email messages. This reference contains a definition of the spam filtering script language supported by VPOP3. Note that as later versions of VPOP3 are released, more language features may be added, so this reference indicates in which version of VPOP3 a particular feature was added.

Spamfilter Script Configuration tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spamfilter Script Configuration tab You reach this tab by going to Settings --> Spam Filter -> General, and then choose the General tab. The Spamfilter script has various settings that can be changed to alter the behaviour of the spamfilter. These are defined in the script, so may change with different versions of the script. The settings are currently:

Spam Filter Rules: AddHeader

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spam Filter Rules: AddHeader Statement AddHeader Version 2.1.7+ Purpose Allows you to add, replace or remove the specified header line in the message headers The AddHeader statement requires the full header line in one continuous string, in the format

Temporary Files

Anonymous (anonymous@undisclosed.example.com) — 2026-02-19T17:56:27+00:00

Temporary Files This is for files in the VPOP3\_temp folder Most of the filename is the hexadecimal timestamp (in Windows 'FILETIME'/65536 form) with a 4 digit hex sequential number afterwards. The first letter or two (usually G-Z) can tell something about what caused the file.

Address Book tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Address Book tab The Address Book tab within VPOP3 webmail enables you to manage your lists of contacts and add those contacts into a new or existing message. Substantial alterations to the interface were introduced in version 5. Both interfaces are documented.

Settings -> Admin Settings

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Settings -> Admin Settings The Admin Settings page allows you to perform three key functions: * * * Choosing a Main Administrator The Main Administrator receives notification emails, such as daily reports and errors/problems which may require manual intervention.

Message Archive -> General

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Message Archive -> General Settings -> Message Archive -> General Tab Archive Messages If the Archive Messages box is checked, then VPOP3 will archive incoming and outgoing messages. Main Archive Store Directory You can set the message archive store to any directory accessible by the VPOP3 service. Enter the path in the

Autoresponder Global Scripting

Anonymous (anonymous@undisclosed.example.com) — 2026-03-23T15:29:29+00:00

Autoresponder Global Scripting For scripting to modify the autoresponder text which is embedded in the autoresponder itself, see Autoresponder Scripting The Autoresponder Global Script is executed for every autoresponse. It is stored in the 'Autoresponder.lua' script in Settings → Scripts

DMARC Reporter Script

Anonymous (anonymous@undisclosed.example.com) — 2023-11-12T09:51:40+00:00

DMARC Reporter Script (from VPOP3 v8.6 onwards) This script lets you customise how VPOP3 sends DMARC reports to the sending domain. This can be useful in case the sending domain's DMARC configuration is incorrect as that can cause errors sending the reports or cause messages to be 'stuck' in VPOP3's Outqueue. These problems won't cause any lasting damage, but may be inconvenient or annoying, so you can alter the behaviour using Lua scripting

IMAP4 -> Advanced tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

IMAP4 -> Advanced tab This page is reached from Services -> IMAP4 Server, then the Advanced tab. Here are some advanced options for the IMAP4 service in VPOP3 Fake access to inaccessible mailboxes In the IMAP4 service you may have folders which do not exist. For instance, if you are accessing a shared Inbox folder from a user called 'Karen', then their folder will be called

Incoming SMTP Mail

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Incoming SMTP Mail If you have an incoming SMTP mail feed, then the mail server sending mail to you will connect to your VPOP3 computer to send the mail. The mail connection is controlled by the sending computer. IMPORTANT If you have a permanent Internet connection with a static IP address, the usual way of having incoming SMTP is to configure your

ListServer Settings

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

ListServer Settings Settings -> ListServer Settings In VPOP3, the ListServer is an automated 'user' which handles mailing list requests, such as subscribe & unsubscribe commands. Anyone can send an email to the ListServer to subscribe to (public) mailing lists, or unsubscribe from mailing lists they are on, or see a list of public mailing lists etc.

Settings -> Local Mail -> General

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Settings -> Local Mail -> General The Local Mail -> General page allows you to configure a few simple, but fundamentally important settings. Default Domain In the majority† of cases, this is the domain name that VPOP3 will use when sending automated messages; for instance, users may receive a message from

LogDB.Messages table

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

LogDB.Messages table The LogDB.Messages table contains a record of all messages logged by VPOP3. A message is logged when a message is sent/received/etc. Columns * msgid - this is a bigint sequential value which identifies the message uniquely in the database

LogDB.Recipients table

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

LogDB.Recipients table The LogDB.Recipients table contains a record of the recipients for messages logged by VPOP3. A message may have one or more recipients Columns * rcptid - this is a bigint sequential value which identifies the recipient uniquely in the database

Monitor Scripting

Anonymous (anonymous@undisclosed.example.com) — 2019-08-27T16:13:40+00:00

Monitor Scripting (Added in V6.15) This script has three functions: * MonitorIncoming * MonitorInternal * MonitorOut The functions are similar, except they are called when different messages are to be monitored (incoming, internal and outgoing messages respectively).

POP3 Client Lua Scripting

Anonymous (anonymous@undisclosed.example.com) — 2023-08-16T07:48:01+00:00

POP3 Client Lua Scripting The POP3 Client Lua Script is called POP3CLT.LUA and is edited in Settings -> Scripts. This script is called whenever VPOP3 runs a POP3 session to download messages from a remote POP3 server. VPOP3 will call the following Lua functions in the script at the following times:

Mail Connectors -> Mail Senders

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Mail Connectors -> Mail Senders The Mail Sender tells VPOP3 how to send mail out to the Internet. If you want to send mail for specific users to another specific mail server (e.g. a local Microsoft Exchange Server or another VPOP3 server) then use the

Misc -> General Tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Misc -> General Tab VPOP3 Host Name The VPOP3 Host Name is used by VPOP3 when it is telling other mail software what it is called. For instance, when it connects to another SMTP server it will send the host name as the parameter for the HELO or EHLO command, and when an SMTP client connects to VPOP3, it announces its name in the welcome banner as required by the SMTP standard.

New message tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

New message tab The New message tab within VPOP3 webmail is where you prepare, edit and send messages, including replies and forwards. As you can see from the screenshot, the page is divided into two main sections: Menu bar General tab bar Status bar [New message tab - VPOP3 Version 5 Webmail] Page structure New message toolbar

Route incoming POP3 mail by parsing message headers

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Route incoming POP3 mail by parsing message headers This routing method is generally used if you have a catch-all or 'multi-catch' mailbox with your Internet provider. With this method, VPOP3 will look at the To/Cc and other fields in the message headers to try to work out who the message is for. If the recipient is not listed in the headers (eg for BCCd mail) it may not be able to automatically detect who the message is for.

SMTP Direct Sender Settings

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTP Direct Sender Settings Mail Connectors -> Mail Senders -> SMTP Direct Sender -> Settings tab The SMTP Direct Settings tab lets you set how VPOP3 will send mail using SMTP Direct DNS Servers to Use This setting tells VPOP3 the IP addresses of the DNS servers it should use to find the recipients' mail servers. Separate multiple addresses with commas.

Mail Connectors -> Mail Senders -> SMTP Direct

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Mail Connectors -> Mail Senders -> SMTP Direct VPOP3 can be configured to send mail directly to the recipient's mail server (or the recipient's mail service provider). Usually this is only used if you have a high-end business class Internet connection - such as a leased line, or your mail server is co-located in a data centre. Attempts to use SMTP Direct sending on a dial-up/ADSL/Cable/FTTC/etc connection may be problematic since the receiving mail server may think you a home user who has been …

Lua SMTP Rules Scripts

Anonymous (anonymous@undisclosed.example.com) — 2026-03-26T11:41:59+00:00

Lua SMTP Rules Scripts When VPOP3 is processing SMTP Rules for messages received by SMTP, it runs a script called smtprules_(x).lua, where (x) is replaced by the numeric ID of the SMTP service VPOP3 processes SMTP Rules at least three times for each message - once when MAIL FROM has been received, once for each RCPT TO, and once when the whole message data has been received.

SMTP Server -> Spam Reduction

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTP Server -> Spam Reduction The Spam Reduction tab lets you configure various ways VPOP3 can reduce spam and email address spoofing Domainkeys “Domainkeys” is a way of signing a message to show that it comes from the person it claims to come from. The system is too complex to go into here, but it essentially takes key parts of the message header, as well as the message body and creates a PKI digital signature on it, using a 'private key' on your system. The receiving end will find the same…

Use the spam filter scripting to add fixed text to the subject on incoming messages

Anonymous (anonymous@undisclosed.example.com) — 2021-12-13T15:20:04+00:00

Use the spam filter scripting to add fixed text to the subject on incoming messages This needs VPOP3 version 5 or later. This script allows you to add fixed text to the subject an incoming message, eg so that users can see that a message is an incoming rather than local message (be aware of weaknesses in this strategy - eg forwarded messages, spoofing of the marker, breaking DKIM message signatures, etc)

Use the spam filter scripting to add random text to the subject on incoming messages

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Use the spam filter scripting to add random text to the subject on incoming messages This needs VPOP3 version 5 or later. This script is for the case where you want a message to the 'support' user to have the text [XXX-99999] added to an incoming message's subject if it does not already exist. Some people want this text to use as reference numbers for a

Increase the spam score for certain recipients

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Increase the spam score for certain recipients This script is for the case where you want certain recipients to have a weighted score. For instance if you have users who have left and who mostly receive spam, but you don't want to reject their mail totally.

Increase the spam score for header marker

Anonymous (anonymous@undisclosed.example.com) — 2020-10-05T16:14:12+00:00

Increase the spam score for header marker This script is for the case where your ISP adds a header eg 'X-Spam: Yes' to the message header, and you want the VPOP3 spamfilter to quarantine messages with that marker. Add the following to the spamrules_userchecks.txt file. This script file only gets processed on incoming messages (the spamrules_localmail.txt script ends the processing of locally sent messages)

Allow messages through from a specific IP address

Anonymous (anonymous@undisclosed.example.com) — 2022-01-25T11:59:27+00:00

Allow messages through from a specific IP address This script allows messages through the spam filter if they arrive at VPOP3 from a specific SMTP sender (only when the message is sent directly to VPOP3 using SMTP, not via another server). Add the following to the spamrules_userlocal.txt file. This script file gets processed on all messages.

Spamrules example - increase spam score for long sender domain

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spamrules example - increase spam score for long sender domain This script is for the case where you to increase the spamminess of emails where the sender's email address contains a long domain. In this case we'll say if the sender's domain has 20 or more characters in the first section (between the @ and first .). Note that we do not necessarily recommend that you do this as it is not a very good indicator of spam, but it is something we've been asked for, so here it is.

Spamrules example - increase spam score if there are many links in the email

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spamrules example - increase spam score if there are many links in the email This script is for the case where you to increase the spamminess of emails where the email contains many links - in this case we'll say if the email contains 10 or more links. Note that we do not necessarily recommend that you do this as it is not a very good indicator of spam, and will probably catch a lot of newsletter type emails, but it is something we've been asked for, so here it is.

Spam Filter Rules: HTTPGet

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spam Filter Rules: HTTPGet Statement HTTPGet Version 2.3.7+ Purpose Enables the script to retrieve a web page The HTTPGet statement requires a url, headers variable name and content variable name, in the format HTTPGet

Spam Filter Rules: HTTPGetMD5

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spam Filter Rules: HTTPGetMD5 Statement HTTPGetMD5 Version 2.3.7+ Purpose Enables the script to retrieve a web page, returning an MD5 hash of its contents in hex encoded form The HTTPGetMD5 statement requires a url, headers variable name and MD5 hash variable name, in the format

Spam Filter Rules: HTTPPost

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spam Filter Rules: HTTPPost Statement HTTPPost Version 2.4.9+ Purpose Enables the script to post data to a web server The HTTPPost statement requires a url, data string, headers variable name and content variable name, in the format HTTPPost

Spam Filter Rules: IfMatch

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spam Filter Rules: IfMatch Statement IfMatch Version 2.1.7+ Purpose Allows you to perform a regular or substring match on a variable or part of the message being processed IfMatch statements require a data parameter and a search value, in the format

Spam Filter Rules: RemoveBag

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spam Filter Rules: RemoveBag Statement RemoveBag Version 2.2.1+ Purpose Removes a specified value from a bag The RemoveBag statement requires a bag name and a value, in the format RemoveBag * If the value is found in the bag, it is removed

Spam Filter Rules: WinHTTPGet

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spam Filter Rules: WinHTTPGet Statement WinHTTPGet Version 2.4.9+ Purpose Enables the script to retrieve a web page using the WinINET functionality The WinHTTPGet statement requires a url, headers variable name and content variable name, in the format

Increase the spam score for subject marker

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Increase the spam score for subject marker This script is for the case where your ISP adds a marker eg '[spam]' to the message subject, and you want the VPOP3 spamfilter to quarantine messages with that marker. Add the following to the spamrules_userchecks.txt file. This script file only gets processed on incoming messages (the spamrules_localmail.txt script ends the processing of locally sent messages)

Status

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Status The VPOP3 Status screen has two tabs * Server Status * Sessions Server Status The Server Status tab is essentially a copy of the VPOP3 Status Monitor information. * Connection Status - this shows the 'online' status of VPOP3. If it says idle, it does not mean VPOP3 is not working, or not doing anything, it just means that it is not currently sending or collecting mail from the Internet.

VPOP3 Status Monitor

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

VPOP3 Status Monitor The VPOP3 status monitor allows users to see what VPOP3 is doing, and also, optionally, to send/receive simple 'instant messages' between local users. Different users can have different permissions for the status monitor. They can be set for all administrators or non-administrators on

Useful Database Queries

Anonymous (anonymous@undisclosed.example.com) — 2026-03-16T11:02:32+00:00

Useful Database Queries Below are some database (SQL) queries which may be useful in some situations. You can run these from the 'psql' program at the command prompt. Some can also be run from the Settings -> Database -> Query page in the VPOP3 settings.

Autoresponder

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Autoresponder An autoresponder is a way of automatically replying to messages as they arrive in a user's mailbox. In VPOP3, an incoming message must arrive in a user's mailbox for the autoresponder to trigger. If you use forwards, assistants, mappings, etc to divert a message before it arrives in the mailbox, the autoresponder will never trigger. If you want to use an autoresponder, but not keep the original message, then make sure the message arrives in the mailbox (eg by using an 'Assistant'…

Message Rules

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Message Rules The Edit User -> Message Rules tab can be used to create/edit rules which are processed when messages arrive in a User's mailbox. They can be used to copy messages, mark them as read, delete them, etc VPOP3 will process Message Rules in the order they appear in the list. If you want to change the order of the rules, you can drag & drop them into the correct order. Usually when VPOP3 has processed a rule, it will go on to check further rules, but you can use the

Prune Rules

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Prune Rules The Edit User -> Prune Rules tab can be used to create/edit rules which cause messages to be automatically deleted according to specified criteria. To add or edit a “prune rule”, press the Add Rule button. This will add a new rule to the table, with a set of default settings. Don't worry, this rule doesn't take effect until you press the Submit button.

User Routing Options

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

User Routing Options Assistant The assistant for a user is an email address (or set of email addresses, separated by semicolons) where incoming messages to this user will be copied or redirected. Normally messages will be copied to the assistant, but if the

User Routing Script

Anonymous (anonymous@undisclosed.example.com) — 2023-03-27T10:32:18+00:00

User Routing Script If there is a /user_redirect.lua script, this Lua script can override VPOP3's message routing options. You can edit this either in the Settings -> Scripts page in the settings, or via the 'Routing' tab in the user's settings in the VPOP3 administration console. This script affects how VPOP3 will handle how messages

Users

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Users The Users page shows the list of users, as well as giving you some actions which you can perform use the user list. * Import users from file * Import users from Windows * Export users to file * Bulk Add Users * Edit User Welcome Message * Send Admin Message * Edit a User User List Outgoing Messages Just above the main user list is an entry Outgoing Message Queue. Clicking on this will let you see which messages are waiting to be sent out, and you can delete/

VPOP3.SendMessage

Anonymous (anonymous@undisclosed.example.com) — 2021-08-09T10:58:46+00:00

VPOP3.SendMessage The Lua function 'VPOP3.SendMessage' sends a text email message It takes four parameters: * The email address of the sender * The email address of the recipient * The subject line * The message body The function returns one value:

VPOP3.SetSetting

Anonymous (anonymous@undisclosed.example.com) — 2021-03-09T16:37:10+00:00

VPOP3.SetSetting The Lua function 'VPOP3.SetSetting' sets a general setting forVPOP3 It takes two parameters: * The name of the setting. This can either by the 'Name' field of the 'Settings.Settings' database table or the internal setting name * The data to set (must be a string)

Webmail Tabs

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Webmail Tabs From version 4 onwards, VPOP3 webmail has a tabbed structure, which enables you to move between various screens with minimal effort. By using tabs, the entire webmail can be loaded in one go - so there is no need to waste time and bandwidth by downloading the same key components each time you switch between the various parts of the webmail.

What's new in version 5 webmail?

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

What's new in version 5 webmail? This is a list of some of the most noticeable changes to VPOP3's webmail interface for version 5. For a more detailed list of changes, view our bugtracker. [VPOP3 Version 5 - mobile compatible webmail] Mobile compatible webmail If you access version 5 webmail from a mobile device, you will probably be redirected to the mobile compatible version. It is a cut-down version of Webmail, which retains the key features, but doesn't utilise the extra features which w…