PSCS Wiki

Formatting Syntax

Anonymous (anonymous@undisclosed.example.com) — 2026-03-16T16:00:10+00:00

Formatting Syntax DokuWiki supports some simple markup language, which tries to make the datafiles to be as readable as possible. This page contains all possible syntax you may use when editing the pages. Simply have a look at the source of this page by pressing

SMTP Server Lua Scripting

Anonymous (anonymous@undisclosed.example.com) — 2025-05-08T08:23:35+00:00

SMTP Server Lua Scripting The SMTP Server Lua Script is called SMTPSVR.LUA and can be edited from the Settings -> Scripts page in the VPOP3 settings. This script is called whenever an instance of the VPOP3 SMTP server is launched - ie whenever someone opens a connection to port 25 on the VPOP3 server to send it a message, whether from a local user or an incoming SMTP message.

Webmail Menu bar

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Webmail Menu bar The Webmail Menu bar within VPOP3 webmail enables you to quickly perform relevant actions. The Menu has six main headings; of which, three have multiple options. Option Active Function V Notes Message Mail and View Message tabs Opens/closes Message menu

Autoresponder Commands

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Autoresponder Commands This article only applies to VPOP3 v4 and earlier A VPOP3 autoresponder can contain special text strings to create special behaviour, in addition to plain text as part of the response. There are three types of 'command' *

Spam Filter Rules: Variables

Anonymous (anonymous@undisclosed.example.com) — 2023-08-14T16:01:01+00:00

Spam Filter Rules: Variables The VPOP3 spam filter script language supports simple variables. In most places these are specified as ${}, but in some places they are just specified as - for instance where a statement always puts its result into a variable.

Spamfilter White/Blacklists

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spamfilter White/Blacklists This lets you set whitelists & blacklists for the spam filter. There are four lists you can manage. The Whitelist Addresses & Blacklist Addresses lists let you specify sender email addresses to check. With the default rule weights, if a sender's address is on the Whitelist, it will be allowed through the spam filter, and if it is on the Blacklist it will be blocked. If an address is on both the Whitelist and the Blacklist, they will cancel each other out, and the me…

French Webmail Language File

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

French Webmail Language File Copy/paste the text below to a file 'french.lng' or 'francais.lng' in the VPOP3 directory. (French users, feel free to update/correct the text below) #login page logintitle=VPOP3 Login webadminlogin=web admin login webmaillogin=web mail login enterusername=You must specify your VPOP3 username here bookmarksnotsupported=I'm sorry, but your web browser does not support this function. You will have to add this page to your bookmarks manually. loginfailed=Login Faile…

Settings -> Attachment Processing

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Settings -> Attachment Processing The Attachment Processing page allows you to configure VPOP3 to perform two distinct functions on messages that contain attachments: * * Filtering The Filtering tab is divided into four main sections: Attachment Filtering

Groups

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Groups In VPOP3 a 'group' is mainly an administrative feature. If you only wish to have a list of email addresses to send messages to under one address, you should use the 'List' feature instead. The main function of Groups is to let you set certain user attributes for a whole group of users at once.

Lists

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Lists The Lists section in VPOP3 lets you view and manage the various types of 'List' which VPOP3 supports * Distribution Lists * Mailing Lists * Forwardings * ODBC Mailing Lists * Groups Using a list A list will contain zero or more 'members' (usually email addresses) which can be messaged all at once. To send a message to all the members of a list, you will usually send an email to the listname at a valid domain.

Encryption

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Encryption There are several different encryption methods used on the Internet which are relevant to VPOP3. Current versions of VPOP3 Basic will be able to connect to other POP3 or SMTP servers using either SSL or TLS. This allows you to use VPOP3 to access services such as GMail which require SSL/TLS.

GDPR for hosted VPOP3 service

Anonymous (anonymous@undisclosed.example.com) — 2025-10-14T15:43:01+00:00

GDPR for hosted VPOP3 service (Since Brexit, the UK has “UK GDPR” instead of “EU GDPR”, so this document refers to UK GDPR) Also see GDPR for VPOP3 as most of that applies to the VPOP3 hosting service as well. This Data Processing Agreement is part of our hosted VPOP3 service terms. You can view the revision history by clicking on the 'clock' icon to the right.

SMTP Relay Service FAQ

Anonymous (anonymous@undisclosed.example.com) — 2021-06-29T08:35:43+00:00

SMTP Relay Service FAQ We provide an SMTP Relay Service for many of our customers. The price starts from £40 (+VAT if applicable) per year, for up to 5000 messages, or 750MB, per month. How do I order the SMTP Relay Service? To order the SMTP relay service, either email

Setting up VPOP3 to work with Exchange 2003

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Setting up VPOP3 to work with Exchange 2003 The instructions below are for Exchange Server 2003. For other versions of Exchange see here. You can link VPOP3 to Exchange Server, so that Exchange Server sends outgoing mail through VPOP3 and VPOP3 sends any incoming mail directly to Exchange Server.

German Webmail Language Page

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

German Webmail Language Page Copy/paste the text below to a file 'german.lng' in the VPOP3 directory. (German users, feel free to update/correct the text below) #login page logintitle=VPOP3 Login webadminlogin=web admin login webmaillogin=Webmail Anmeldung enterusername=Sie müssen einen Benutzernamen angeben bookmarksnotsupported=I'm sorry, but your web browser does not support this function. You will have to add this page to your bookmarks manually. loginfailed=Anmeldung fehlgeschlagen …

How to move messages between users

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to move messages between users There are several ways to do this, depending on your exact needs Via Administrator Console You can view a user's 'Inbox' messages by clicking on the message count on the Users list, then select the messages, choose the target user, and press the

Sending mail from different email addresses or domains

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Sending mail from different email addresses or domains VPOP3 does not (by default) place any restrictions on which email addresses or domains you can send mail from. However, there may be external restrictions on which email addresses/domains you can send from. For instance, if you send mail through your ISP's mail server, they may only allow you to send mail from specific addresses, or the domain you send mail from may have a sender policy defined, such as

How To Setup VPOP3 Service Security

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How To Setup VPOP3 Service Security VPOP3 can be configured to restrict access to its various services depending on the client computer's IP address. This is useful if you want to allow access from only certain IP addresses (eg within your LAN) and prevent access from other IP addresses (eg the Internet).

Mappings

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Mappings In VPOP3, Mappings are a way of explicitly linking an email address to a user or list. They can also be used to indicate that an email address is remote, even though it would otherwise appear to be a local email address. In other email servers, a similar feature may be called 'aliases'

Mail Sender Advanced Settings

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Mail Sender Advanced Settings Mail Connectors -> Mail Senders -> (name) -> Advanced Advanced Domain Filtering For VPOP3 v6.11 and later, see the Domain Filtering section of the user manual. The Domain Filtering box lets you restrict which email messages are sent via this Mail Sender. You specify each rule on a separate line, and the message will be sent if it matches any sender rule

SMTP -> General tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTP -> General tab This page is reached from Services -> SMTP Server, then the General tab. This page lets you set general settings for the SMTP service component of VPOP3. The SMTP service is how users send outgoing mail, and how incoming SMTP messages arrive. Service Name

GDPR for other hosting services (eg web hosting)

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

GDPR for other hosting services (eg web hosting) As a hosted service provider, we are classed as a “Data Processor” under the GDPR regulations. For our hosting services: * Data is held in the UK. Data is not transmitted outside of the EU except at your explicit request or command.

Multiple VPOP3 icons in the taskbar

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Multiple VPOP3 icons in the taskbar If you reinstall VPOP3 it is possible that you may end up with two VPOP3 Status Monitor icons in the task tray. This doesn't mean that two copies of VPOP3 are running, just that two copies of the VPOP3 Status Monitor are running.

How To Allow Mail Relay Through VPOP3

Anonymous (anonymous@undisclosed.example.com) — 2025-05-21T07:57:18+00:00

How To Allow Mail Relay Through VPOP3 If you are allowing remote access into VPOP3 to collect mail then you may also want those remote users to be able to send their outgoing mail through VPOP3 as well. This is more complex than allowing users to collect mail, because, by default, SMTP connections are not authenticated. This means that when someone tries to send a message through VPOP3, VPOP3 doesn't know who that user is. This can cause a problem if unauthorised users try to send mail through…

Configure Email Signatures

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Configure Email Signatures * Global Signatures * Personal Signatures * Webmail Signatures Notes When creating a signature it is generally best to keep it as short as possible. Disclaimers & confidentiality notices in emails are generally regarded as having little or no legal significance, so lengthy signatures just use up bandwidth.

How To Encrypt Sessions

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How To Encrypt Sessions VPOP3 Enterprise 2.6 and later supports SSL/STARTTLS encrypted sessions to VPOP3 itself. So, the email client or web browser will encrypt the data passed to VPOP3 so it cannot be intercepted. This requires an SSL Certificate to be created for VPOP3.

Mail Not Downloading From ISP

Anonymous (anonymous@undisclosed.example.com) — 2026-04-06T17:59:47+00:00

Mail Not Downloading From ISP This normally happens because you have told VPOP3 to Leave Messages On Server (on the Mail Connectors -> Mail Collectors -> (name) -> POP3 General tab). If you do this, VPOP3 will leave messages on the ISP's mail server for several days, and remember that it has already downloaded them. Then, the next time it connects it will see that there are some messages waiting, but it may find that it has already downloaded them, so it won't download them again.

Remote Access to VPOP3 without a permanent Internet connection

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Remote Access to VPOP3 without a permanent Internet connection If you do not have a permanent connection to the Internet, then the user will need to dial directly into the VPOP3 computer or another computer on the network. This only works reliably if the dial-inserver is running Windows NT, Windows 2000 or later versions.

Spanish Webmail Language File

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spanish Webmail Language File Copy/paste the text below to a file 'spanish.lng' or 'espanol.lng' in the VPOP3 directory. (Spanish users, feel free to update/correct the text below) #login page logintitle=VPOP3 Login webadminlogin=web admin login webmaillogin=web mail login enterusername=Especificar aca el usuario de Correo bookmarksnotsupported=Disculpe, pero su navegador no soporta esta funcion. loginfailed=Login Fallido - Favor reintente nuevamente invalidlogin=Detalles del login inválidos…

AutoresponderConditionList Replacement

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

AutoresponderConditionList Replacement Use: ~autoresponderconditionlist~ Required parameter: responderid - the ID of the autoresponder This returns a JSON structure containing an array of the rules associated with the specified autoresponder. The return structure is an array of objects containing:

AutoresponderInfo Replacement

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

AutoresponderInfo Replacement Use: ~autoresponderinfo~ Required parameter: responderid - the ID of the autoresponder This returns a JSON structure containing the details of the specified autoresponder. The return structure is an object containing:

Address Book tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Address Book tab The Address Book tab within VPOP3 webmail enables you to manage your lists of contacts and add those contacts into a new or existing message. Substantial alterations to the interface were introduced in version 5. Both interfaces are documented.

Autoresponders - v3 and v4

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Autoresponders - v3 and v4 This section lets you define an autoresponder for a user. An autoresponder is a message which is sent back in response to a message which arrives in this user's mailbox. The Autoresponder Type can be set to None, Simple Autoresponder

Lua SMTP Relay Control

Anonymous (anonymous@undisclosed.example.com) — 2025-08-14T09:24:55+00:00

Lua SMTP Relay Control Every time VPOP3 is going to send messages via SMTP Relay, it runs a script called relayout.lua in the VPOP3 directory. Global Variables This script may have global variables, depending on your version of VPOP3. In VPOP3 3.0.0L and later, there are two read-only global variables set at the start of the script:

SMTP Service - Filtering

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTP Service - Filtering The SMTP Server -> Filtering tab lets you set up filtering of messages going through the VPOP3 SMTP service. This may be incoming SMTP messages, or locally sent messages. SMTP Rules SMTP Rules let you create custom rules for processing messages as they go through the VPOP3 SMTP service.

Message Rules

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Message Rules The Edit User -> Message Rules tab can be used to create/edit rules which are processed when messages arrive in a User's mailbox. They can be used to copy messages, mark them as read, delete them, etc VPOP3 will process Message Rules in the order they appear in the list. If you want to change the order of the rules, you can drag & drop them into the correct order. Usually when VPOP3 has processed a rule, it will go on to check further rules, but you can use the

Permissions

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Permissions This section lets you configure the permissions that a particular user has. Allowed Protocols The Allowed Protocols section lets you specify which services this user has access to. Note that these settings affect access to the whole service. If you want users to be able to access a service from some IP addresses, but not from others, then use the

Prune Rules

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Prune Rules The Edit User -> Prune Rules tab can be used to create/edit rules which cause messages to be automatically deleted according to specified criteria. To add or edit a “prune rule”, press the Add Rule button. This will add a new rule to the table, with a set of default settings. Don't worry, this rule doesn't take effect until you press the Submit button.

User Routing Script

Anonymous (anonymous@undisclosed.example.com) — 2023-03-27T10:32:18+00:00

User Routing Script If there is a /user_redirect.lua script, this Lua script can override VPOP3's message routing options. You can edit this either in the Settings -> Scripts page in the settings, or via the 'Routing' tab in the user's settings in the VPOP3 administration console. This script affects how VPOP3 will handle how messages

SMTPClientAllowRemove Action

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTPClientAllowRemove Action (VPOP3 Enterprise Only) This removes an entry to the SMTP Client Allow list. The data specified is: * IPAddress - the IP address to add. This can be an individual IP address or a CIDR address (IPv4 and IPv6 addresses are allowed)

SMTPClientBlockRemove Action

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTPClientBlockRemove Action (VPOP3 Enterprise Only) This removes an entry to the SMTP Client Block list. The data specified is: * IPAddress - the IP address to add. This can be an individual IP address or a CIDR address (IPv4 and IPv6 addresses are allowed)

SMTPClientBlocks Replacement

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTPClientBlocks Replacement Use: ~smtpclientblocks~ ~end~ The format string can have the replacements * address - IP address (returned as host address or CIDR address as appropriate) * date - the date/time the address was added to the database in YYYYMMDDHHMMSS format

POP3 Protocol

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

POP3 Protocol POP3 is the most basic email protocol for collecting mail which is in common use. Almost all email client programs (such as Microsoft Outlook & Outlook Express, Mozilla Thunderbird, etc) can collect mail using POP3. With POP3, mail is usually downloaded by the email client and stored on the user's local PC. It is then deleted from the mail server, so the only copy is on the user's PC. Any mail folders etc are all managed on the user's PC.

What is the VPOP3 Antivirus solution?

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

What is the VPOP3 Antivirus solution? “VPOP3 Antivirus” is a new product to replace the avast! for VPOP3 product which will no longer be supported after the end of 2012. VPOP3 Antivirus uses the popular 'ClamAV' virus scanner to scan incoming and outgoing messages for viruses.

What are the limitations of the Home User licence

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

What are the limitations of the Home User licence The VPOP3 Home User licence allows you to have up to 5 users for a lower price than the standard 5 user licence, but there are some restrictions in functionality. These are described below: * There is no Mailing List Server (you can still have distribution lists)

Backscatter

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Backscatter In email, “backscatter” is the term used if you send bounce messages back to spam messages. As most spam messages use forged email addresses, then the bounce messages will go to an innocent person, who will find them very annoying. Stopping VPOP3 from sending Backscatter

Custom filtering incoming mail

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Custom filtering incoming mail If you want to filter incoming mail using custom rules there are a few ways of doing this, depending on your exact requirements. * Download rules - if your incoming mail is via POP3 collection, you want to filter on headers, size etc (not contents)

-ERR Mailbox Locked error

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

-ERR Mailbox Locked error If your email client displays an '-ERR Mailbox Locked' or '-ERR [IN-USE] Mailbox Locked' error when trying to log into VPOP3 it means that the mailbox is locked. The POP3 standard requires that POP3 mailboxes have an 'exclusive lock' on them when they are in use. This means that only one POP3 client can access the mailbox at once. Also, if a POP3 mailbox is currently accessing a mailbox, then no IMAP4, Webmail or administrator access is allowed to the mailbox at the s…

Error Message Handling

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Error Message Handling VPOP3 will normally send an error message to the Main Administrator every time it encounters an error. We recommend you leave it like this in most cases - if an error message occurs repeatedly, then it usually means there's an underlying problem which needs resolving rather than ignoring.

Exchange 2007

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Exchange 2007 You can link VPOP3 to Exchange Server, so that Exchange Server sends outgoing mail through VPOP3 and VPOP3 sends any incoming mail directly to Exchange Server. You should first of all set up VPOP3 to send and receive Internet email as normal.

Setting up an iPhone/iPad/iPod Touch

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Setting up an iPhone/iPad/iPod Touch To set up an iPhone to access VPOP3's mail, you first of all need to configure VPOP3 to allow access by remote users (unless you will only be using the iPhone in the office, connected via WiFi to the office LAN). Adding the mail account to your iPhone/iPad

Redirect message for a user if a sender is a particular email address

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Redirect message for a user if a sender is a particular email address Say you want messages addressed to 'user1' to be redirected to 'user2' if they came from customer@domain.com This is an unusual requirement, so there is no way to do it in VPOP3.

Repairing corrupted database

Anonymous (anonymous@undisclosed.example.com) — 2024-01-15T11:35:45+00:00

Repairing corrupted database With PostgreSQL (as with most high-end databases) the database system will automatically recover after power failures etc, if it can. If it can't then there is no manual 'repair' function, because the data cannot totally be recovered (or it would automatically have been recovered).

VPOP3 re-downloading old messages from the ISP POP3 server

Anonymous (anonymous@undisclosed.example.com) — 2026-01-05T09:31:47+00:00

VPOP3 re-downloading old messages from the ISP POP3 server If you tell VPOP3's POP3 mail collector to leave messages on the ISP's server for a few days, you may find that sometimes VPOP3 will redownload all the messages from the ISP mailbox again.

Spamfilter Whitelist & Blacklist

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spamfilter Whitelist & Blacklist The VPOP3 spamfilter has a whitelist and a blacklist for sender addresses. It also has a whitelist and blacklist for words/phrases. You can view these lists in the VPOP3 settings by going to Settings -> Spamfilter ->

Message Archive -> General

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Message Archive -> General Settings -> Message Archive -> General Tab Archive Messages If the Archive Messages box is checked, then VPOP3 will archive incoming and outgoing messages. Main Archive Store Directory You can set the message archive store to any directory accessible by the VPOP3 service. Enter the path in the

Settings -> Diagnostics

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Settings -> Diagnostics The Diagnostics page allows you to enable, configure and disable various methods of diagnostic logging, within VPOP3. Log file overview By default, VPOP3 will keep two copies of most log files: * The current log file, with a

Import Users From File

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Import Users From File VPOP3 supports the importation and exportation of users, via a CSV file (see for a specification of the CSV file format). NOTE: This process is not designed to provide a complete backup of user data, nor is it intended to facilitate moving VPOP3 to a new computer. Instead, see the following relevant pages:

LAN Forwarding Queue Status

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

LAN Forwarding Queue Status To view the LAN Forwarding Queue Status, go to Settings -> Local Mail -> LAN Forwarding -> Queue Status The LAN Forwarding Queue shows the messages which VPOP3 has currently got queued to be sent to another mail server on your network using SMTP. The LAN Forwarding Queue status page shows a simple list of the messages waiting to be sent. The four columns in the table show:

LDAP Schema in VPOP3 4.x

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

LDAP Schema in VPOP3 4.x Hierarchical Structure LDAP data is stored as a hierarchical database with the 'DN' (Distinguished Name) of the object as the key. The DN is made up of the various 'Relative DNs' used to navigate to the desired object, placed in reverse order, separated by commas.

ListServer Commands

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

ListServer Commands The ListServer is an automated process in VPOP3 which manages mailing lists. People can send commands to the ListServer to perform various functions remotely. Whether these commands are allowed, and exactly how they work depends on the particular mailing list's settings.

Lua Scripting

Anonymous (anonymous@undisclosed.example.com) — 2026-03-26T23:49:01+00:00

Lua Scripting Lua is a simple scripting programming language often used for embedding in other applications. VPOP3 uses it to customise behaviour in places where most people will be happy with the default behaviour, but occasionally people will want to do something more complicated. Rather than having lots of extra options to complicate things for most users, we have opted to go for a more flexible scripting facility.

Mail Collectors

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Mail Collectors A Mail Collector is how you tell VPOP3 to collect incoming mail. Each Mail Collector is associated with one or more Connections. The VPOP3 Connector Schedule determines when each Connection is run. Mail Collector General Tab Each Mail Collector has a General

Message Headers

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Message Headers This article describes some of the headers which VPOP3 can add to messages. Note that some of these may be added by customisable scripts used by VPOP3, so may not match exactly, but the descriptions below are for the defaults distributed with VPOP3.

POP3 Mail Collection

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

POP3 Mail Collection POP3 Mail Collection is when VPOP3 will collect mail from an external POP3 mailbox - for instance, from an Internet Provider. POP3 General This page tells VPOP3 how to collect mail. * POP3 Server Address - this is the name (or IP address) of the POP3 server from which you want VPOP3 to collect mail

POP3 Server -> General Tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

POP3 Server -> General Tab Services -> POP3 Server -> General tab This page sets the general settings for the POP3 service component in VPOP3. The POP3 service is how users collect their email from VPOP3 using a POP3 email client Service Name The Service Name is a name you give the service for your reference. It is only used in administrative displays and logging, so the name doesn't matter. Most people leave it at the default.

Mail Connectors -> Connector Schedule

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Mail Connectors -> Connector Schedule The Connector Schedule tells VPOP3 when to connect to send mail using Mail Senders and collect mail using Mail Collectors. It does not affect incoming SMTP over a permanent connection, or LAN Forwarding. The connection schedule also tells VPOP3 when to check for updates to the

Mail Connectors -> Mail Senders -> SMTP Direct

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Mail Connectors -> Mail Senders -> SMTP Direct VPOP3 can be configured to send mail directly to the recipient's mail server (or the recipient's mail service provider). Usually this is only used if you have a high-end business class Internet connection - such as a leased line, or your mail server is co-located in a data centre. Attempts to use SMTP Direct sending on a dial-up/ADSL/Cable/FTTC/etc connection may be problematic since the receiving mail server may think you a home user who has been …

Lua SMTP Rules Scripts

Anonymous (anonymous@undisclosed.example.com) — 2026-03-26T11:41:59+00:00

Lua SMTP Rules Scripts When VPOP3 is processing SMTP Rules for messages received by SMTP, it runs a script called smtprules_(x).lua, where (x) is replaced by the numeric ID of the SMTP service VPOP3 processes SMTP Rules at least three times for each message - once when MAIL FROM has been received, once for each RCPT TO, and once when the whole message data has been received.

Spam Filter Rules: HTTPGet

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spam Filter Rules: HTTPGet Statement HTTPGet Version 2.3.7+ Purpose Enables the script to retrieve a web page The HTTPGet statement requires a url, headers variable name and content variable name, in the format HTTPGet

VPOP3 Status Monitor

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

VPOP3 Status Monitor The VPOP3 status monitor allows users to see what VPOP3 is doing, and also, optionally, to send/receive simple 'instant messages' between local users. Different users can have different permissions for the status monitor. They can be set for all administrators or non-administrators on

User Advanced settings

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

User Advanced settings The Edit User → Advanced tab contains some 'advanced' settings for a VPOP3 user. Message Recycle Bin In VPOP3 Enterprise (v5 and later) the Message Recycle Bin will keep messages in the message store for a short time after the user has deleted the messages. This is to allow easier recovery from the inevitable case where a user has deleted messages by mistake, and wants them back.

Autoresponder

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Autoresponder An autoresponder is a way of automatically replying to messages as they arrive in a user's mailbox. In VPOP3, an incoming message must arrive in a user's mailbox for the autoresponder to trigger. If you use forwards, assistants, mappings, etc to divert a message before it arrives in the mailbox, the autoresponder will never trigger. If you want to use an autoresponder, but not keep the original message, then make sure the message arrives in the mailbox (eg by using an 'Assistant'…

User Delivery Script

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

User Delivery Script (VPOP3 v6.5 or later) If there is a /delivery.lua script, this Lua script can override VPOP3's message delivery options. You can edit this in the Settings -> Scripts page in the settings. This script affects how VPOP3 will handle how messages being delivered to this user are handled.

Users.AutoresponderConditions table

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Users.AutoresponderConditions table The Users.AutoresponderConditions table contains a record of all autoresponder trigger conditions created in VPOP3. These tell VPOP3 when a particular autoresponder should fire for a particular user. Each autoresponder can have zero or more conditions. An autoresponder with zero conditions will never fire but can be reactivated later by adding a new condition.

Using tables/grids

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Using tables/grids Many VPOP3 settings pages use grids to show you a set of data, for instance on the Users, Mappings and Lists pages. These have several standard features which are described below. * Most of the grids are 'delayed-fill'. This means that they don't fill up with data immediately when the page is loaded, this is to speed up the page load times. Only the first (visible) section of the grid is filled at first (sometimes there may be a short delay before this is filled, if the da…

OutMsgRecipients Replacement

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

OutMsgRecipients Replacement Use: [~outmsgrecipients~] Required parameter: MsgID This returns a JSON array containing details on the recipients for the specified message in the VPOP3 out queue. There is one object returned per recipient, and the object is:

SMTPClientAllowAdd Action

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTPClientAllowAdd Action (VPOP3 Enterprise Only) This adds an entry to the SMTP Client Allow list. The data specified is: * IPAddress - the IP address to add. This can be an individual IP address or a CIDR address (IPv4 and IPv6 addresses are allowed)

SMTPClientBlockAdd Action

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTPClientBlockAdd Action (VPOP3 Enterprise Only) This adds an entry to the SMTP Client Block list. The data specified is: * IPAddress - the IP address to add. This can be an individual IP address or a CIDR address (IPv4 and IPv6 addresses are allowed)

SMTPIDSEvents Replacement

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTPIDSEvents Replacement Use: ~smtpidsevents~ This returns the latest entries from the SMTP client logging database. It will return 100 entries unless the count parameter is specified in the URL, in which case that will specify the maximum number of entries to return.

Version 5 Web Admin API

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Version 5 Web Admin API This section is only relevant for people who may want to access the Administration features from their own scripts, or want to customise the standard administration pages. Note that no free support is available for this. This is not a full list of features, but it will be updated from time to time.

DNSSEC

Anonymous (anonymous@undisclosed.example.com) — 2019-09-19T13:41:29+00:00

DNSSEC DNSSEC (Domain Name System Security Extensions) is used to secure DNS records and prevent them from man-in-the-middle attacks and spoofing. DNSSEC has been around for 10 years, but it has generally not been widely adopted for various reasons, but it is

GDPR for VPOP3 self-hosted software

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

GDPR for VPOP3 self-hosted software VPOP3 is an email server program, it is not a service, so if you use VPOP3 on your own computer we are not a “data controller” or a “data processor” under GDPR rules as we never see any of your data (unless you give us permission to remotely connect to your PC for technical support purposes).

Hosted Exchange Service

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Hosted Exchange Service We can provide a Hosted Exchange Service if you requirements mean that you need to have an Exchange Server. For most users, a hosted Exchange server is more complicated, more expensive and more limiting that having your own VPOP3 server or a dedicated hosted VPOP3 server, but some people require features that only Exchange can provide, such as shared calendars where the company policy restricts you to using Microsoft Outlook as the email client.

How do I write an email to technical support?

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How do I write an email to technical support? Please send the email to support@pscs.co.uk Note that free technical support is currently only available for version 3.0 and later When sending the email, please make sure you include all relevant information:

IMAP4 Mail Protocol

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

IMAP4 Mail Protocol IMAP4 (Internet Mail Access Protocol version 4) is a more advanced protocol than POP3. With IMAP4 your mail is stored and manipulated on the mail server. So, if you move a message from one folder to the other, the message is moved on the server. If you send a message, your mail client will (usually) put a copy into your 'Sent Items' folder. If you delete a message, it is deleted from the server, and so on.

What is Webmail?

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

What is Webmail? “Webmail” is a term used to describe an email client which is accessed through a web page rather than as a standalone program. Some well known services which offer webmail are services such as Hotmail, Yahoo, Gmail etc. All versions of VPOP3 have a Webmail service included as standard.

Which Ports does VPOP3 use?

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Which Ports does VPOP3 use? If you want to use VPOP3 through a firewall, you will need to open up some TCP ports in the firewall. VPOP3 uses several ports, for the different services it provides. The best way to see the ports it uses is to go to Services

FATAL: connection limit exceeded for non-superusers

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

FATAL: connection limit exceeded for non-superusers This error means that there are too many connections to the PostgreSQL database server. VPOP3 having exclusive use of database If only VPOP3 is using the PostgreSQL database, then you can reduce the number of connections that VPOP3 will make to the database at once. This is set in the VPOP3 settings at

450 4.3.2 Content Filter Timeout

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

450 4.3.2 Content Filter Timeout If you get this error appearing when messages are sent to VPOP3, either in a bounce message, or in the VPOP3 status monitor, it means that the VPOP3 computer filter is taking more than the allowed amount of time (usually 60 seconds).

550/553 Not Permitted error from BT Internet's mail servers

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

550/553 Not Permitted error from BT Internet's mail servers BT Internet's mail servers only allow messages to be sent from 'approved' email addresses. If you try to send messages from other addresses BT's mail servers may return a '550 Not Permitted' error, a '553' error, or may silently discard the message depending on what their server feels like doing today.

Socket Error 10047 - Addresses in the specified family cannot be used with this socket

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Socket Error 10047 - Addresses in the specified family cannot be used with this socket Meaning: Addresses in the specified family cannot be used with this socket This error only normally occurs during VPOP3 startup. There are two main possible reasons for this error:

Socket Error 10048 - Specified Address Already in Use

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Socket Error 10048 - Specified Address Already in Use This error only normally occurs during VPOP3 startup. It occurs if some other software running on the same machine as VPOP3 is using one of the ports that VPOP3 is already using. This could be a proxy like WinGate, WinProxy or anti-virus software that acts as a proxy, an LDAP server (e.g. Active Directory) or another mail server program (e.g. Exchange Server). The latter two causes are particularly common on

Socket Error 10054 - The virtual circuit was reset by the remote end

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Socket Error 10054 - The virtual circuit was reset by the remote end Error 10054 means that the connection between VPOP3 and a remote computer (eg the ISP or another computer on your LAN) was disconnected by something outside of VPOP3. This is often caused by anti-virus software or Internet security/firewall on the VPOP3 machine but it could be any of a number of things. Any software or hardware that is sitting between VPOP3 and the ISP could be the root cause.

Socket Error 10503 - No More Data

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Socket Error 10503 - No More Data Error 10503 means that the connection between VPOP3 and a remote computer (normally your ISP) was dropped at an unexpected time. This is different from the error 10054 in that this is a controlled line drop. One way this can happen is if the ISP's POP3 server uses an obsolete standard which allows it to drop the connection if a POP3 'LIST' command is performed on an empty mailbox. The current standard requires that the connection is not dropped until the clien…

Allow Remote Access to VPOP3 Mailboxes

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Allow Remote Access to VPOP3 Mailboxes Sometimes people want to be able to access their office VPOP3 mail server from a remote site or mobile phone etc. These instructions assume you have a permanent Internet connection (eg ADSL, Cable etc). If you don't have a permanent Internet connection, see

Attachments have been removed or renamed

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Attachments have been removed or renamed If you have received an email and one or more of its attachments have been removed or renamed, it might be a result of Attachment Filtering. You can inspect the filtering rules by going to Administration Settings -> Settings ->

Autoresponders / Out of Office

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Autoresponders / Out of Office VPOP3 has an autoresponder facility for sending automatic replies when a message arrives in a mailbox. This is often used for 'Out of Office' replies, but it is not limited to that use. To set an autoresponder, the administrator can edit the user and go to the

How to Backup VPOP3

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to Backup VPOP3 By default VPOP3 v3 and later will automatically perform a daily backup of the database into a file called DBBACK-x.DMP, where the backup file rotates on a weekly basis (DBBACK-0.DMP is Sunday's backup, DBBACK-1.DMP is Monday's backup, etc).

Configuring Calendar on iOS

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Configuring Calendar on iOS These instructions are for configuring a new Calendar account on iOS for iPhone, iPad and iPod Touch. The version of iOS used for these instructions is iOS v6.0, but they will probably work or help with other versions of iOS.

Changing a user's password

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Changing a user's password To change a user's password in VPOP3, you should log into the VPOP3 settings, go to the 'Users' page, then double-click on the user whose password you want to change. This will bring up a window giving you access to the user's settings. Go to the 'Passwords' tab where you can set the passwords.

Accepting Incoming SMTP through a router

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Accepting Incoming SMTP through a router If your ISP is providing you with an SMTP mail feed (incoming SMTP) and you have VPOP3 connecting to the ISP through a router then you will probably need to modify the router configuration to allow this. Most routers' default configuration will only allow outbound connections (ie connections from the local network out to the Internet). If you need to accept incoming SMTP mail, then you need to tell the router to allow inbound connections on port 25 for …

Controlling VPOP3 via Email

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Controlling VPOP3 via Email You can control certain aspects of VPOP3 by sending emails to 'mailer_daemon@' The subject line must be one of the lines below: * Set Assistant * Query Assistant * Password * Set Forwarding * Query Forwarding

Copy Outgoing mail

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Copy Outgoing mail Sometimes people need to copy outgoing mail for various reasons. There are several ways of doing this in VPOP3 depending on your exact requirements: * Message Monitoring - this copies all outgoing, incoming and/or internal mail sent by/to specific users to another specific user

How to create an SSL Certificate

Anonymous (anonymous@undisclosed.example.com) — 2026-03-23T10:18:43+00:00

How to create an SSL Certificate VPOP3 Enterprise supports SSL certificates for encrypted sessions. The basic mechanism to create an SSL certificate is that you have to generate a CSR (Certificate Signing Request) then send that to a CA (Certificate Authority) who will sign your certificate and give you the certificate back.

Creating Extra SMTP Services

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Creating Extra SMTP Services In VPOP3 Enterprise (not VPOP3 Basic) you can create multiple SMTP services. This can be useful if you want VPOP3 to listen on different ports and/or have different settings. There are two ways of doing this. Have a single SMTP service listening on multiple ports or IP addresses

Data stream contained NUL character

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Data stream contained NUL character Description of the problem NUL characters (bytes with value 0) are not allowed in email messages and should not be transmitted over POP3, SMTP or IMAP4 except in certain circumstances. If an attachment contains such a byte it must be encoded using

VPOP3 Database Size

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

VPOP3 Database Size The VPOP3 directory is stored in the VPOP3\pgsql\data folder and subfolders. If you are concerned about the size of the VPOP3 database, there are several factors which may make the database larger than you would expect: * The VPOP3 database contains a lot more information than just messages in mailboxes. This can include settings, outgoing messages, historical logging information, statistical information for the spamfilter, information about archived messages, etc. Also,…

Download Rules

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Download Rules Download rules are applied to messages downloaded using a POP3 mail collector. To configure the rules, go to the VPOP3 settings, then Mail Connectors -> Mail Collectors -> POP3 General. There is an Edit Download Rules button which brings up the download rule editor. To tell this mail collector to use the download rules, ensure that the

Full Text Search

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Full Text Search In VPOP3 Enterprise v7.0 a facility for full-text-search on message content was added. Because the full-text-search indexes can be quite big, this facility is optional. For several reasons, the full-text-search is stored in a separate PostgreSQL database. This means that it is not backed up with your standard backups. After a restore, the full-text-search index can be rebuilt from the raw message content.

Initial Configuration Tasks

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Initial Configuration Tasks After installing VPOP3, you will need to get into the VPOP3 settings. The easiest way of doing this is to find the VPOP3 Status Monitor in the Windows task tray. Right-click this icon, and choose 'VPOP3 Settings'. (If that doesn't work, see this article to troubleshoot Status Monitor problems). Alternatively, on the VPOP3 PC, you can go to Start

Handling mail for multiple incoming domains

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Handling mail for multiple incoming domains VPOP3 can easily handle mail for several incoming domains. Exactly how you do it depends on the exact situation. All domains are 'aliases' If the domains are aliases of each other, for instance, you have 'mycompany.com' and 'mycompany.org', both of which are the same, so each address at mycompany.com also exists at mycompany.org, and the emails go to the same people regardless of which domain is used, then you simply configure the domains in the ma…

Configuring iCal on Mac OSX to connect to VPOP3's CalDAV service

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Configuring iCal on Mac OSX to connect to VPOP3's CalDAV service This requires VPOP3 v6 or later. The following instructions are for Mac OS X v10.7.5 but should work with similar versions. We have not been able to create an account by going to System Preferences

Incoming SMTP Feed

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Incoming SMTP Feed An incoming SMTP feed is where incoming mail is sent directly to your mail server without going through your ISP's POP3 mail server on the way. Advantages An incoming SMTP feed has several advantages over going via a POP3 mailbox:

Initial User

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Initial User When you install VPOP3 it will ask you to create an initial user. This counts towards your user count and is created as your initial administrator account. More administrator accounts can be created later if you wish, and you can remove the initial user if you wish.

Install VPOP3 using external PostgreSQL database

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Install VPOP3 using external PostgreSQL database (VPOP3 version 5 or later) In some cases, advanced users may wish to have VPOP3 use an external PostgreSQL database instead of the one installed with VPOP3. This is possible by telling VPOP3 the connection details during installation.

Installation Errors

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Installation Errors This page lists some errors which may occur during installation and the solution. In general, do NOT 'ignore' any errors unless we tell you to. If you have to retry an installation, when it is an upgrade from versions 1 - 4 going to version 5 or later, then make sure you have told the installer to install the database. Sometimes a partial installation will make the installer think that the database is already installed.

We installed a new router and now nothing works

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

We installed a new router and now nothing works If you installed a new router on your network and left it at the default settings, you may find that VPOP3 doesn't seem to work afterwards. This is because it may be that the new router allocates new IP addresses on your network.

ISP needs you to connect on port 587

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

ISP needs you to connect on port 587 Some ISPs will need you to send mail using port 587, instead of port 25. Port 587 is the 'SMTP Submission' port which is commonly used instead of, or as well as, the standard SMTP port 25 for when users are sending mail to a smart host/relay server.

Many instances of Postgres.exe are running

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Many instances of Postgres.exe are running If you are running VPOP3 3.0 or later, and look in the 'Processes' list in Windows TaskManager you will probably see multiple instances of postgres.exe running. This is perfectly normal, and does not indicate a problem. The PostgreSQL database works by having a separate instance of postgres.exe for each connection to the database (as well as a few extra for management and house keeping). This behaviour is documented on the

How to configure Mozilla Thunderbird

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to configure Mozilla Thunderbird This article won't show you all the possible settings in Thunderbird, because there are so many. Thunderbird is one of the most powerful & flexible email clients available at the time of writing, especially if you use IMAP4 (with VPOP3 Enterprise).

Not Working As Expected

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Not Working As Expected This is the page to come to if you think you've set something up correctly but it isn't doing what you think it should be doing. If you're getting an error message or some other concrete indication that something has actually 'gone wrong' then the

How to Obtain Error Logs

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to Obtain Error Logs As part of diagnosing a support issue our support team may ask you to send them various log files. This page explains how to obtain the right files at the right time. How Logging Works Under its default settings VPOP3 logs a minimal amount of information about what it is doing to various files in the main VPOP3 directory. When investigating a support issue it is often the case that we will need you to switch on logging to extra files or increase the level of detail be…

POP3/Webmail/IMAP4 can't see a user's messages, but the administrator can

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

POP3/Webmail/IMAP4 can't see a user's messages, but the administrator can Version 2.x only. This problem does not occur with version 3 or later. This problem can happen if the user's message index database has become damaged. The POP3, Webmail & IMAP4 services get the message summary data from the database, whereas the administrator console gets the message information directly from the message files on the disk, so if the database is corrupted, the administrator console can still see the mess…

PostgreSQL server won't start due to damaged log files

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

PostgreSQL server won't start due to damaged log files If the PostgreSQL server won't start at all, because its transaction logs are damaged, you will probably need to recreate the database store totally. To rebuild the database: * Open a command prompt and find the VPOP\pgsql folder

Problems sending mail via BT from your own domain

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Problems sending mail via BT from your own domain BT Internet only allow you to send mail through their mail servers from your BT Internet address or other registered address. Attempts to send from other addresses will give you a 553 SMTP error message.

Problems sending messages to spam@

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Problems sending messages to spam@ If a VPOP3 user forwards a message to spam@, then the VPOP3 spam filter will train itself that that message was spam. If, when you forward the message, you get an error message like: Subject: Mail Delivery Failure Delivery Failure Report. The following message was incorrectly addressed. Recipient: "spam" is unrecognised.

Restore Deleted Calendars

Anonymous (anonymous@undisclosed.example.com) — 2022-11-18T11:43:52+00:00

Restore Deleted Calendars This article will help if a user has been deleted and all their calendars are lost and need to be restored. Note that this functionality is not built into VPOP3, and requires the use of Python3 to run a script First you need to install Python 3.8 or later, and the psycopg2 plugin

Restore selected mail folders or mailbox in VPOP3 v5 or later

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Restore selected mail folders or mailbox in VPOP3 v5 or later (This option is only available in VPOP3 Enterprise) First - if the problem is that messages were deleted very recently (the default is within 3 days), you can probably use the Undelete feature in VPOP3.

Restore a single user's mailbox or folder in v3 or v4

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Restore a single user's mailbox or folder in v3 or v4 To restore a single user's Mailbox or folder is currently only possible in VPOP3 Enterprise, and requires a second PC to act as a temporary VPOP3 server. You need to: * Restore your latest VPOP3 backup to another PC (a temporary VPOP3 server)

Restricting the number of recipients sent to

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Restricting the number of recipients sent to Some ISPs set restrictions on the number of recipients that you are allowed to send in a certain time period, eg 50 messages per hour, or the number of recipients that you are allowed to send per message or per connection.

Restricting the number of messages sent

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Restricting the number of messages sent Some ISPs set restrictions on the number of messages that you are allowed to send in a certain time period, eg 50 messages per hour, or the number of messages that you are allowed to send per connection. Restriction of messages per connection

Seeing where a message came from

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Seeing where a message came from Sometimes you need to check to see where a message really came from. The 'From:' email address is easily forged, so that cannot be relied upon. The first thing you have to do is to get the full message headers. These may look daunting, but are very useful for problem diagnosis.

Sender Policy Framework / SPF

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Sender Policy Framework / SPF SPF is a system used to tell mail servers which IP addresses can send mail from which domains. It is designed to reduce 'spoofing' of email addresses. For instance, if you receive an email message from your bank, your mail software can check that it came from an IP address authorised to send mail from your bank, and treat the message with suspicion if it didn't come from an authorised IP address.

SMTP Rule Example - restrict who can send to a local email address

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTP Rule Example - restrict who can send to a local email address If you have a local email address (a user, group or distribution list) and you want to restrict which email addresses can send messages to this address, you can use SMTP rules. There are a few ways you can configure the SMTP rules for this scenario.

Training the VPOP3 Spam Filter

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Training the VPOP3 Spam Filter The VPOP3 spam filter has a couple of mechanisms which can be used to 'train' it to distinguish between spam and not-spam. Bayesian Filter The Bayesian filter this looks at words in messages sent and received and their probabilities of being contained in spam and not-spam, and works out an overall probability of the message being spam or not-spam based on the combination of those probabilities.

How To Upgrade VPOP3

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How To Upgrade VPOP3 Note: if you are upgrading to VPOP3 version 5 or later from version 4 or earlier, please see How To Upgrade VPOP3 to version 5 Upgrading VPOP3 is a straightforward process. Download VPOP3 from our web site and ideally back up your current installation just in case something goes wrong. Then simply run the installer that you downloaded and install it over the top of your existing VPOP3. All your settings and mail will be preserved.

How To Upgrade VPOP3 to version 5 or later

Anonymous (anonymous@undisclosed.example.com) — 2019-11-08T15:37:52+00:00

How To Upgrade VPOP3 to version 5 or later Upgrading VPOP3 is usually a straightforward process. Download VPOP3 from our web site and back up your current installation just in case something goes wrong. Then simply run the installer that you downloaded and install it over the top of your existing VPOP3. All your settings and mail will be preserved.

Upgrading VPOP3 to version 8.x from v7 or earlier

Anonymous (anonymous@undisclosed.example.com) — 2020-09-03T15:07:34+00:00

Upgrading VPOP3 to version 8.x from v7 or earlier VPOP3 v8.x uses PostgreSQL 10 as its database engine, which is the latest supported 32 bit version of PostgreSQL. Later versions of PostgreSQL are 64-bit only, which means we cannot use them while continuing to support 32 bit versions of Windows.

Upgrading VPOP3 to version 9.x from v7 or v8

Anonymous (anonymous@undisclosed.example.com) — 2026-03-18T20:49:54+00:00

Upgrading VPOP3 to version 9.x from v7 or v8 VPOP3 v9 and later requires a 64 bit version of Windows 8.1 or later VPOP3 v9.x uses PostgreSQL 18 as its database engine. This can only easily be upgraded from PostgreSQL 9.3 or later, which means it must be an upgrade of VPOP3 v7 or later. If you are using an earlier version of VPOP3, then upgrade it to v8.7 first, then upgrade to v9 or later

Use Download Rules for incoming POP3 message filtering

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Use Download Rules for incoming POP3 message filtering If you have VPOP3 retrieving messages from a POP3 account on an ISP, then you can use Download Rules to do basic filtering on incoming messages. (If you have incoming SMTP, then use SMTP Rules instead) Download rules cannot perform all mail filtering tasks. For more features,

How to use the VPOP3 Status Monitor

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to use the VPOP3 Status Monitor The VPOP3 Status Monitor is a small program which displays a postbox icon (usually red) in the Windows notification area (usually at the bottom right of the screen - by the clock). This icon can be used for quick access to various VPOP3 facilities. Note that the Status Monitor is

Using a Mobile Phone with VPOP3

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Using a Mobile Phone with VPOP3 Many people want to use a mobile phone to send/receive their email nowadays. This is usually easy to do with VPOP3. The recommended way is to have the phone connect directly to VPOP3 for sending/receiving email. To do this, you need to do three things:

Using VPOP3 Spam Filtering with LAN Forwarding

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Using VPOP3 Spam Filtering with LAN Forwarding When using the VPOP3 Spam filter with LAN forwarding you need to be aware a bit of how it works. The spam filter will only quarantine messages which are going to a VPOP3 user. This is because that user needs to be able to log into VPOP3 to be able to view their quarantined messages.

How to move VPOP3 V3 to a new folder

Anonymous (anonymous@undisclosed.example.com) — 2018-12-05T15:25:41+00:00

How to move VPOP3 V3 to a new folder This guide assumes you want to move the whole of VPOP3 (including the message store) to a new folder on the same PC * Stop VPOP3 * Stop PostgreSQL * Remove the PostgreSQL service * Move VPOP3 to the new folder

Move VPOP3 Version 3 or 4 to a new PC

Anonymous (anonymous@undisclosed.example.com) — 2019-11-12T16:09:08+00:00

Move VPOP3 Version 3 or 4 to a new PC Moving VPOP3 Version 3 or 4 to a new PC is slightly different from moving earlier versions, because of the database system. The summary of steps is: * Stop VPOP3 on the original PC * Manually make a backup of the database on the original PC

v5 - Move the message store to a new folder/drive

Anonymous (anonymous@undisclosed.example.com) — 2019-11-12T16:10:42+00:00

v5 - Move the message store to a new folder/drive Here is an alternative method, which may be simpler, but only moves the data, not the whole database store (which is a subtle difference) This guide assumes you want to just move the VPOP3 message store/database to a new folder on the same PC, and leave the VPOP3 installation directory where it is.

How to move VPOP3 V5+ to a new folder

Anonymous (anonymous@undisclosed.example.com) — 2021-03-19T16:01:48+00:00

How to move VPOP3 V5+ to a new folder This guide assumes you want to move the whole of VPOP3 (including the message store) to a new folder on the same PC * Stop VPOP3 * Stop VPOP3DB * Remove the VPOP3DB service * Move VPOP3 to the new folder

Move VPOP3 Version 5 (or later) to a new PC

Anonymous (anonymous@undisclosed.example.com) — 2026-04-21T11:12:40+00:00

Move VPOP3 Version 5 (or later) to a new PC Moving VPOP3 Version 5 or later to a new PC is slightly different from moving earlier versions, because of the database system, which was introduced for version 3 and modified for version 5. The summary of steps is: * Stop VPOP3 on the original PC

VPOP3 Deleting messages as 'old' messages

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

VPOP3 Deleting messages as 'old' messages If VPOP3 says 'deleting old message' in the status window activity log that means that it has seen the unique ID of that message before, longer ago than the time specified for VPOP3 to leave messages on the server, so it thinks that the message is an old message, and so deletes it.

VPOP3 Historical Logger Backlog

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

VPOP3 Historical Logger Backlog This problem is primarily related to VPOP3 versions 2.5 -> 2.6. Theoretically it could happen on later versions, but would be extremely unusual (see the note at the bottom if you are using version 3.0 or later) You get an error message with subject

VPOP3 Is Responding Slowly

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

VPOP3 Is Responding Slowly If VPOP3 is responding slowly to users there are several common causes: * The VPOP3 server disk may be badly fragmented. Defragment the server disk(s). Note that sometimes the Windows defragmenter will say that the disk doesn't need defragmenting even if it does, so it is best to do it anyway. Also, there is a better free defragmenter available called

VPOP3 is using a lot of disk space

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

VPOP3 is using a lot of disk space If VPOP3 is using a lot of disk space, the problem is usually that there is lots of data there, so it has to use the disk space. Message Storage In VPOP3 version 5 and later, all users' messages are stored in the database, so they will occupy space in the VPOP3\pgsql\data folder.

VPOP3 Not Starting Properly

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

VPOP3 Not Starting Properly If VPOP3 is not starting properly, then the first thing to check is whether the database server is starting. In VPOP3 v3 and later, VPOP3 uses a PostgreSQL Database server for data storage, so if the database server is not running, VPOP3 will not be able to start properly. In this case, the VPOP3.EXE process may appear in Task Manager, but it won't respond to anything, or it may appear in Task Manager and then stop after a short period.

SMTP Relay Protection in VPOP3

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTP Relay Protection in VPOP3 SMTP Relay Protection should be used on ALL SMTP mail servers (such as VPOP3) which have a permanent connection to the Internet. You may also want to use it on servers which are only connected occasionally via a dial-up connection.

VPOP3 Status Monitor Problems

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

VPOP3 Status Monitor Problems The VPOP3 Status Monitor is the program which shows the little (usually red) postbox icon in the Windows task tray. This usually launches automatically from the Windows startup group. This program is VPOP3Status.EXE on the disk, or can be run manually from

VPOP3 Server Access Not Allowed

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

VPOP3 Server Access Not Allowed If you get an error like: -ERR VPOP3 Server access not allowed! when trying to access VPOP3, then this means that the relevant server's IP Access Restrictions defined in VPOP3 do not allow access from your client computer.

When sending mail, VPOP3 adds 'PRVS=...' to the sender address

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

When sending mail, VPOP3 adds 'PRVS=...' to the sender address This is because VPOP3 version 5 and later support BATV. BATV helps to eliminate 'backscatter spam', where someone else sends spam pretending to be from you, and then you receive all the bounce messages from those messages. BATV encodes the sender address in a special way so that VPOP3 can detect that a bounce message is in response to a message that you actually sent.

How to write your own spam filter rules

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to write your own spam filter rules VPOP3's spam filter uses a basic scripting language designed for filtering email messages, so a full description of writing your own rules would be very long and complex, as it is really something that only a programmer should do.

Version 5 Web Mail API

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Version 5 Web Mail API This section is only relevant for people who may want to access the WebMail features from their own scripts, or want to customise the standard Webmail pages. Note that no free support is available for this. This is not a full list of features, but it will be updated from time to time.

Access Restrictions Internal Format

Anonymous (anonymous@undisclosed.example.com) — 2023-08-02T08:22:37+00:00

Access Restrictions Internal Format VPOP3 internally stores service IP Access Restrictions in its settings database using the following format to encode the multiple entries These are stored in the settings database as *ALLOWED*.DAT (using VPOP3SETTINGS GET *ALLOWED*.DAT will list them)

Message Archive -> Offline Tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Message Archive -> Offline Tab Settings -> Message Archive -> Offline Tab. The Offline tab lets you tell VPOP3 to move old archived messages to an alternative store, such as CD/DVD or external drive etc. VPOP3 will create a ZIP file containing the old messages. The archive index will still remember the messages, and the name of the ZIP file they are contained in, so you will still be able to search for messages on date, sender, subject, etc, but not on the message content.

Message Archive -> Results Tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Message Archive -> Results Tab Settings -> Message Archive -> Results tab The Results tab only exists if you have previously done a search operation and are viewing the results of that search. The Results page shows you a list of the messages (up to 1000 entries are available) returned by the search. You can select multiple entries by using shift+click or ctrl+click

Attachment Processing Script

Anonymous (anonymous@undisclosed.example.com) — 2022-11-24T09:29:03+00:00

Attachment Processing Script (Added in v7.6) This script has functions to allow message attachments to be altered: * NeedsRecode * NeedsRewrite * GetRename * GetContentDispositionLine (added in v7.8) * IsLockNeeded * RewriteAttachment

Autoresponder Global Scripting

Anonymous (anonymous@undisclosed.example.com) — 2026-03-23T15:29:29+00:00

Autoresponder Global Scripting For scripting to modify the autoresponder text which is embedded in the autoresponder itself, see Autoresponder Scripting The Autoresponder Global Script is executed for every autoresponse. It is stored in the 'Autoresponder.lua' script in Settings → Scripts

Bandwidth Control

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Bandwidth Control (VPOP3 Enterprise Only) Every time a connection is made to a VPOP3 service, or a user logs into a service, VPOP3 Enterprise runs a Lua function which can assign the connection a bandwidth pool, or assign a bandwidth limit on the connection.

Calendar.Events table

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Calendar.Events table The Calendar.Events table contains a record of all the events in calendars managed by VPOP3. An 'event' is an iCalendar event. Note that if an event is a recurring series, there will only be one 'event' in the database, not one event per instance of the recurrence.

Connections

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Connections In VPOP3 a Connection tells VPOP3 how to 'connect' to the Internet. VPOP3 supports up to 10 Connections, which can be either network connections or Dial-Up connections (using a modem) A Connection is linked to one Mail Sender and zero or more Mail Collectors.

Database -> Restore Tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Database -> Restore Tab This tab is only in VPOP3 Enterprise (v5 and later), and is for performing a partial (mailbox/mail folder) restore of the database. To do a full restore of the database, or for VPOP3 Basic/Standard, see the “Restore a Backup of VPOP3” topic Using the

Download Rules

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Download Rules Download rules are a facility in VPOP3 where it can look at message summary information before downloading a message from an ISP POP3 mailbox (they do not work on incoming SMTP messages - use SMTP Rules for that) To edit download rules, go to

Find a message

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Find a message If you know the subject of a message, you can search the entire message store for messages with this subject. Go to Settings → Database → Query Alternatively, at a command prompt in the VPOP3 directory run psql (The password is 'vpop3pass')

Group a user's folders into letter groups

Anonymous (anonymous@undisclosed.example.com) — 2026-03-16T11:12:42+00:00

Group a user's folders into letter groups This is useful in VPOP3 Enterprise if you have a large folder with many subfolders and want to group the subfolders into other subfolders based on their first letter For example, if you have * Customers

IDS Log Event Numbers

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

IDS Log Event Numbers The VPOP3 SMTP IDS logging facility logs SMTP events in a form which may be useful to Intrusion Protection Systems, or security monitoring software. One of the fields in the log file is the Log Event Number These are: * 0 = SMTP authentication failure

LAN Forwarding Scripting

Anonymous (anonymous@undisclosed.example.com) — 2025-08-20T16:08:40+00:00

LAN Forwarding Scripting (Added in V8.7) This is stored in the 'LanForwarding.lua' script in Settings -> Scripts Pre-send These functions are called before the message is placed in the LAN Forwarding queue There are two global variables set: *

ListServer Settings

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

ListServer Settings Settings -> ListServer Settings In VPOP3, the ListServer is an automated 'user' which handles mailing list requests, such as subscribe & unsubscribe commands. Anyone can send an email to the ListServer to subscribe to (public) mailing lists, or unsubscribe from mailing lists they are on, or see a list of public mailing lists etc.

Settings -> Local Mail -> General

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Settings -> Local Mail -> General The Local Mail -> General page allows you to configure a few simple, but fundamentally important settings. Default Domain In the majority† of cases, this is the domain name that VPOP3 will use when sending automated messages; for instance, users may receive a message from

LogDB database schema

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

LogDB database schema The LogDB database schema contains historical logging information for reports etc. Entries are added to this by several components of VPOP3, and the 'reporting' section uses the data here. The LogDB database is only populated if the '

Monitor Scripting

Anonymous (anonymous@undisclosed.example.com) — 2019-08-27T16:13:40+00:00

Monitor Scripting (Added in V6.15) This script has three functions: * MonitorIncoming * MonitorInternal * MonitorOut The functions are similar, except they are called when different messages are to be monitored (incoming, internal and outgoing messages respectively).

POP3 Client Lua Scripting

Anonymous (anonymous@undisclosed.example.com) — 2023-08-16T07:48:01+00:00

POP3 Client Lua Scripting The POP3 Client Lua Script is called POP3CLT.LUA and is edited in Settings -> Scripts. This script is called whenever VPOP3 runs a POP3 session to download messages from a remote POP3 server. VPOP3 will call the following Lua functions in the script at the following times:

Mail tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Mail tab The Mail tab within VPOP3 webmail enables you to manage your sent and received messages. As you can see from the screenshot, the page is divided into three main sections: Menu bar General tab bar Status bar [Mail tab - VPOP3 Version 5 Webmail] Page structure Mail toolbar The Mail toolbar contains the following buttons:

Message Monitoring

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Message Monitoring Message monitoring in VPOP3 will tell VPOP3 to send a copy of all the outgoing, internal and/or incoming mail from/to specified users to be sent to another specified user. In the current versions of VPOP3, all monitored messages are sent to the same user (or list), you cannot specify different recipients for different monitored users. (This may be something that is added/enhanced in the future)

Misc -> Advanced Tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Misc -> Advanced Tab Settings -> Misc Settings -> Advanced You will normally not need to change any settings on this page unless VPOP3 technical support have suggested it. If you do make changes, and want to go back to the original settings, the Restore Defaults button will restore the settings to their defaults.

Misc -> External Fax Tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Misc -> External Fax Tab Settings -> Misc Settings -> External Fax The External Fax tab is for use with some external fax server applications which work by collecting mail from a POP3 mailbox. If a Fax Server Mailbox is selected, then VPOP3 will automatically send any locally sent mail to that mailbox if the recipient is local, but doesn't match another local address (a user, list, mapping etc),

Misc -> General Tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Misc -> General Tab VPOP3 Host Name The VPOP3 Host Name is used by VPOP3 when it is telling other mail software what it is called. For instance, when it connects to another SMTP server it will send the host name as the parameter for the HELO or EHLO command, and when an SMTP client connects to VPOP3, it announces its name in the welcome banner as required by the SMTP standard.

Outgoing Message Scripting

Anonymous (anonymous@undisclosed.example.com) — 2024-03-21T10:49:54+00:00

Outgoing Message Scripting Every time VPOP3 adds a message to the Outgoing mail queue, it runs a script called outmessage.lua. Scripts are stored as files in the VPOP3 directory in VPOP3 v6.6 and earlier, or managed through the Settings -> Scripts page in VPOP3 v6.7 and later.

Quarantine tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Quarantine tab The Quarantine tab within VPOP3 webmail is where you view and manage messages that have been quarantined by VPOP3's spam filter. As you can see from the screenshot, unlike many of the other webmail tabs, it is not divided into multiple sections:

Spamfilter Quarantine Viewer

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spamfilter Quarantine Viewer Settings -> Spamfilter -> Quarantine Viewer The Quarantine Viewer lets you see messages which have been quarantined by the VPOP3 Spam Filter. As an administrator you can see quarantined messages for any user, and release them if appropriate. If you release a message, it will be sent into the original recipient's Inbox, not into your Inbox.

Route incoming POP3 mail by parsing message headers

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Route incoming POP3 mail by parsing message headers This routing method is generally used if you have a catch-all or 'multi-catch' mailbox with your Internet provider. With this method, VPOP3 will look at the To/Cc and other fields in the message headers to try to work out who the message is for. If the recipient is not listed in the headers (eg for BCCd mail) it may not be able to automatically detect who the message is for.

Scheduled Task Script

Anonymous (anonymous@undisclosed.example.com) — 2021-08-09T10:55:07+00:00

Scheduled Task Script Note that this functionality is only available in VPOP3 Enterprise VPOP3 Enterprise can run Lua script periodically to do custom background tasks. It can run a function every minute, 5 minutes, hourly or daily. The Lua script is stored in a file called

Scheduling Management Scripts

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Scheduling Management Scripts VPOP3 runs a script called scheduler.lua in the background, it will periodically call functions in this script at approximately 1 minute, 5 minute, 1 hour and 1 day intervals. These times are only approximate so should not be relied upon for timing.

Services

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Services This page lets you see and manage the services which VPOP3 provides for other programs, such as email clients. These are how users communicate with VPOP3. * General * POP3 Server * SMTP Server * IMAP4 Server (VPOP3 Enterprise Only) * Password Server * Finger Server * LDAP Server * WebMail Server * Status Server * NNTP Server

SMTP Server -> IDS/IPS

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTP Server -> IDS/IPS The IDS/IPS tab lets you set logging and automatic blocking parameters for the IDS (Intrusion Detection System) and IPS (Intrusion Prevention System) component of the SMTP server. SMTP servers are regularly attacked, both by incoming mail attacks (spam/viruses etc) and relay attacks (by spammers and other malware distributors trying to send mail through them). Because of this, there is a system in VPOP3 which will track attack attempts on the SMTP service and can automat…

SMTP -> Load Limiting tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTP -> Load Limiting tab This page is reached from Services -> SMTP Server, then the Load Limiting tab. Here you can set limits on how many active SMTP sessions there are, and other related settings. This lets you limit the load on the VPOP3 server. This is especially important if VPOP3 is performing spam filtering on incoming SMTP messages, because the spam filter can add considerable load. You can reduce the spamfilter load by using the

Use the spam filter scripting to add fixed text to the subject on incoming messages

Anonymous (anonymous@undisclosed.example.com) — 2021-12-13T15:20:04+00:00

Use the spam filter scripting to add fixed text to the subject on incoming messages This needs VPOP3 version 5 or later. This script allows you to add fixed text to the subject an incoming message, eg so that users can see that a message is an incoming rather than local message (be aware of weaknesses in this strategy - eg forwarded messages, spoofing of the marker, breaking DKIM message signatures, etc)

Use the spam filter scripting to add random text to the subject on incoming messages

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Use the spam filter scripting to add random text to the subject on incoming messages This needs VPOP3 version 5 or later. This script is for the case where you want a message to the 'support' user to have the text [XXX-99999] added to an incoming message's subject if it does not already exist. Some people want this text to use as reference numbers for a

Increase the spam score for certain recipients

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Increase the spam score for certain recipients This script is for the case where you want certain recipients to have a weighted score. For instance if you have users who have left and who mostly receive spam, but you don't want to reject their mail totally.

Increase the spam score for header marker

Anonymous (anonymous@undisclosed.example.com) — 2020-10-05T16:14:12+00:00

Increase the spam score for header marker This script is for the case where your ISP adds a header eg 'X-Spam: Yes' to the message header, and you want the VPOP3 spamfilter to quarantine messages with that marker. Add the following to the spamrules_userchecks.txt file. This script file only gets processed on incoming messages (the spamrules_localmail.txt script ends the processing of locally sent messages)

Allow messages through from a specific IP address

Anonymous (anonymous@undisclosed.example.com) — 2022-01-25T11:59:27+00:00

Allow messages through from a specific IP address This script allows messages through the spam filter if they arrive at VPOP3 from a specific SMTP sender (only when the message is sent directly to VPOP3 using SMTP, not via another server). Add the following to the spamrules_userlocal.txt file. This script file gets processed on all messages.

Spamrules example - increase spam score for long sender domain

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spamrules example - increase spam score for long sender domain This script is for the case where you to increase the spamminess of emails where the sender's email address contains a long domain. In this case we'll say if the sender's domain has 20 or more characters in the first section (between the @ and first .). Note that we do not necessarily recommend that you do this as it is not a very good indicator of spam, but it is something we've been asked for, so here it is.

Spamrules example - increase spam score if there are many links in the email

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spamrules example - increase spam score if there are many links in the email This script is for the case where you to increase the spamminess of emails where the email contains many links - in this case we'll say if the email contains 10 or more links. Note that we do not necessarily recommend that you do this as it is not a very good indicator of spam, and will probably catch a lot of newsletter type emails, but it is something we've been asked for, so here it is.

Spam Filter Rules: AddBag

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spam Filter Rules: AddBag Statement AddBag Version 2.2.1+ Purpose Adds a value into a 'bag' containing a collection of values, creating the bag if necessary The AddBag statement requires a type, bag name and value, in the format AddBag

Spam Filter Rules: AddHeader

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spam Filter Rules: AddHeader Statement AddHeader Version 2.1.7+ Purpose Allows you to add, replace or remove the specified header line in the message headers The AddHeader statement requires the full header line in one continuous string, in the format

Spam Filter Rules: BulkScan

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spam Filter Rules: BulkScan Statement BulkScan Version 2.1.7+ Purpose Allows you to specify lots of search strings in one section without needing the verbose If statement The BulkScan statement requires a variable name and a limitless number of search specifiers, in the format

Spam Filter Rules: DBInsert

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spam Filter Rules: DBInsert Statement DBInsert Version 6.16+ Purpose Inserts a record into the spam filter database The DBInsert statement requires a type, component name, key and value, in the format DBInsert

Spam Filter Rules: DBQueryOne

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spam Filter Rules: DBQueryOne Statement DBQueryOne Version 6.16+ Purpose Queries the spam filter database for a single record/aggregate The DBQueryOne statement performs a query on the spam filter database and returns a single value which is either the value of a record or an aggregate of several records.

Spam Filter Rules: DefineRule

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spam Filter Rules: DefineRule Statement DefineRule Version 2.1.9+ Purpose Defines a rule name, default weighting and description. See Rule names and weights The DefineRule statement requires a name, default weight and description, in the format DefineRule "" ""

Spam Filter Rules: Goto

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spam Filter Rules: Goto Statement Goto Version 2.1.7+ Purpose A mechanism for directing the script towards a specified label The Goto statement requires a label name, in the format Goto Labels are single word entries that appear on a line of their own, immediately preceded by the colon (:) character. The colon character is not part of the label name.

Spam Filter Rules: HTTPPost

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spam Filter Rules: HTTPPost Statement HTTPPost Version 2.4.9+ Purpose Enables the script to post data to a web server The HTTPPost statement requires a url, data string, headers variable name and content variable name, in the format HTTPPost

Spam Filter Rules: IfMatch

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spam Filter Rules: IfMatch Statement IfMatch Version 2.1.7+ Purpose Allows you to perform a regular or substring match on a variable or part of the message being processed IfMatch statements require a data parameter and a search value, in the format

Spam Filter Rules: RemoveBag

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spam Filter Rules: RemoveBag Statement RemoveBag Version 2.2.1+ Purpose Removes a specified value from a bag The RemoveBag statement requires a bag name and a value, in the format RemoveBag * If the value is found in the bag, it is removed

Spam Filter Rules: WinHTTPGet

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spam Filter Rules: WinHTTPGet Statement WinHTTPGet Version 2.4.9+ Purpose Enables the script to retrieve a web page using the WinINET functionality The WinHTTPGet statement requires a url, headers variable name and content variable name, in the format

Increase the spam score for subject marker

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Increase the spam score for subject marker This script is for the case where your ISP adds a marker eg '[spam]' to the message subject, and you want the VPOP3 spamfilter to quarantine messages with that marker. Add the following to the spamrules_userchecks.txt file. This script file only gets processed on incoming messages (the spamrules_localmail.txt script ends the processing of locally sent messages)

Status

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Status The VPOP3 Status screen has two tabs * Server Status * Sessions Server Status The Server Status tab is essentially a copy of the VPOP3 Status Monitor information. * Connection Status - this shows the 'online' status of VPOP3. If it says idle, it does not mean VPOP3 is not working, or not doing anything, it just means that it is not currently sending or collecting mail from the Internet.

Status Monitor (port 5109) protocol

Anonymous (anonymous@undisclosed.example.com) — 2019-08-19T08:58:45+00:00

Status Monitor (port 5109) protocol This page documents the protocol used between VPOP3 and the Status Monitor. It's not intended for any other purpose, so it's a bit limited, but in certain cases you may find this useful Login Before the Status Monitor receives any updates or can issue commands it must log in using a user's credentials.

Useful Database Queries

Anonymous (anonymous@undisclosed.example.com) — 2026-03-16T11:02:32+00:00

Useful Database Queries Below are some database (SQL) queries which may be useful in some situations. You can run these from the 'psql' program at the command prompt. Some can also be run from the Settings -> Database -> Query page in the VPOP3 settings.

VPOP3 Webmail Help

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

VPOP3 Webmail Help Webmail is a way of accessing your mail using a normal web browser. It is designed to be close in functionality to a 'normal' email client, so should be straightforward to use. If you use VPOP3 Enterprise, then the mail visible through the web browser will be the same as that visible through your IMAP4 email client - the IMAP4 client will synchronise with Webmail.

VPOP3.DeleteMessage Lua function

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

VPOP3.DeleteMessage Lua function The Lua management function 'VPOP3.DeleteMessage' marks a specified message to be deleted, or removes the deleted flag. Messages marked to be deleted will not be deleted immediately, but only when that mailbox is 'purged' from an IMAP4 client.

VPOP3.GetMessageLines

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

VPOP3.GetMessageLines The Lua function 'VPOP3.GetMessageLines' retrieves content lines from the message currently being processed This function is only available in the ProcessMessage function of the POP3CLT.LUA or SMTPSVR.LUA scripts. It takes one parameter: * number - number of lines to retrieve

VPOP3.GetMessagePart

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

VPOP3.GetMessagePart The Lua function 'VPOP3.GetMessagePart' retrieves a MIME part of the message currently being processed. This function is only available in the ProcessMessage function of the POP3CLT.LUA or SMTPSVR.LUA scripts. It takes one parameter: * The MIME part 'Path' from the MimeStructure parameter to the ProcessMessage function

VPOP3.GetMessagePartBody

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

VPOP3.GetMessagePartBody The Lua function 'VPOP3.GetMessagePartBody' retrieves the content of a MIME part of the message currently being processed. This function is only available in the ProcessMessage function of the POP3CLT.LUA or SMTPSVR.LUA scripts. It takes one parameter:

VPOP3.GetMessagePartHeader

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

VPOP3.GetMessagePartHeader The Lua function 'VPOP3.GetMessagePartHeader' retrieves a MIME section header of the message currently being processed. This function is only available in the ProcessMessage function of the POP3CLT.LUA or SMTPSVR.LUA scripts. It takes one parameter:

VPOP3.MessageReset

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

VPOP3.MessageReset The Lua function 'VPOP3.MessageReset' resets an internal read pointer to the start of the message being processed This function is only available in the ProcessMessage function of the POP3CLT.LUA or SMTPSVR.LUA scripts. It takes no parameters The function returns no value

VPOP3.MessageSeek

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

VPOP3.MessageSeek The Lua function 'VPOP3.MessageSeek' sets an internal read pointer to the specified location of the message being processed This function is only available in the ProcessMessage function of the POP3CLT.LUA or SMTPSVR.LUA scripts. It takes one parameter:

VPOP3.SaveAttachment

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

VPOP3.SaveAttachment The Lua function 'VPOP3.SaveAttachment' saves an attachment from the message being processed to a file This function is only available in the ProcessMessage function of the POP3CLT.LUA or SMTPSVR.LUA scripts. It takes two parameters: * number - attachment number to save

VPOP3.SendMessage

Anonymous (anonymous@undisclosed.example.com) — 2021-08-09T10:58:46+00:00

VPOP3.SendMessage The Lua function 'VPOP3.SendMessage' sends a text email message It takes four parameters: * The email address of the sender * The email address of the recipient * The subject line * The message body The function returns one value:

What's new in version 5 webmail?

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

What's new in version 5 webmail? This is a list of some of the most noticeable changes to VPOP3's webmail interface for version 5. For a more detailed list of changes, view our bugtracker. [VPOP3 Version 5 - mobile compatible webmail] Mobile compatible webmail If you access version 5 webmail from a mobile device, you will probably be redirected to the mobile compatible version. It is a cut-down version of Webmail, which retains the key features, but doesn't utilise the extra features which w…

What is IMAP4

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

What is IMAP4 IMAP4 (Internet Mail Access Protocol V4) is a new mail retrieval protocol which can be used as an alternative to the POP3 (Post Office Protocol V3). The main difference between IMAP4 and POP3 is that with POP3 the messages are only stored temporarily on the mail server until they are downloaded to the email client where the messages are stored, manipulated, searched etc. With IMAP4 the messages are stored permanently on the server, and they are manipulated, searched etc on the ma…