PSCS Wiki

Setting up VPOP3 to work with Exchange 2003

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Setting up VPOP3 to work with Exchange 2003 The instructions below are for Exchange Server 2003. For other versions of Exchange see here. You can link VPOP3 to Exchange Server, so that Exchange Server sends outgoing mail through VPOP3 and VPOP3 sends any incoming mail directly to Exchange Server.

Exchange 2007

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Exchange 2007 You can link VPOP3 to Exchange Server, so that Exchange Server sends outgoing mail through VPOP3 and VPOP3 sends any incoming mail directly to Exchange Server. You should first of all set up VPOP3 to send and receive Internet email as normal.

Initial Configuration Tasks

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Initial Configuration Tasks After installing VPOP3, you will need to get into the VPOP3 settings. The easiest way of doing this is to find the VPOP3 Status Monitor in the Windows task tray. Right-click this icon, and choose 'VPOP3 Settings'. (If that doesn't work, see this article to troubleshoot Status Monitor problems). Alternatively, on the VPOP3 PC, you can go to Start

Mail Sender Advanced Settings

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Mail Sender Advanced Settings Mail Connectors -> Mail Senders -> (name) -> Advanced Advanced Domain Filtering For VPOP3 v6.11 and later, see the Domain Filtering section of the user manual. The Domain Filtering box lets you restrict which email messages are sent via this Mail Sender. You specify each rule on a separate line, and the message will be sent if it matches any sender rule

Mappings

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Mappings In VPOP3, Mappings are a way of explicitly linking an email address to a user or list. They can also be used to indicate that an email address is remote, even though it would otherwise appear to be a local email address. In other email servers, a similar feature may be called 'aliases'

How to tell VPOP3 that some users in the local domain are not to be handled by VPOP3

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to tell VPOP3 that some users in the local domain are not to be handled by VPOP3 In some situations you will have a situation where most of your users are handled by VPOP3, but several users will collect their mail directly from a separate POP3 account on your ISP, even though they may have an email address on the same domain as other users.

Message Archive -> General

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Message Archive -> General Settings -> Message Archive -> General Tab Archive Messages If the Archive Messages box is checked, then VPOP3 will archive incoming and outgoing messages. Main Archive Store Directory You can set the message archive store to any directory accessible by the VPOP3 service. Enter the path in the

POP3 Mail Collection

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

POP3 Mail Collection POP3 Mail Collection is when VPOP3 will collect mail from an external POP3 mailbox - for instance, from an Internet Provider. POP3 General This page tells VPOP3 how to collect mail. * POP3 Server Address - this is the name (or IP address) of the POP3 server from which you want VPOP3 to collect mail

Configure SRS

Anonymous (anonymous@undisclosed.example.com) — 2025-08-18T15:28:11+00:00

Configure SRS In VPOP3 8.8 and later, you can use Lua scripting to implement 'SRS' (Sender Rewriting Scheme') in VPOP3 This involves adding a couple of functions to rewrite outgoing return paths in 'relayout.lua' or 'mxout.lua' as appropriate and a couple of functions to redirect rewritten bounce message recipients in 'smtpsvr.lua'

Sender Domain Must Resolve

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Sender Domain Must Resolve If you receive an 'SMTP Client Error' something like: 451 (user@domain.com) Sender Domain Must Resolve this means that the ISP's mail server cannot find the domain.com part of the email address. Often this means that the FROM address of the message is invalid, or that the

Using VPOP3 with Microsoft Exchange Server

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Using VPOP3 with Microsoft Exchange Server You can link VPOP3 to Exchange Server, so that Exchange Server sends outgoing mail through VPOP3 and VPOP3 sends any incoming mail directly to Exchange Server. You should first of all set up VPOP3 to send and receive Internet email as described in the online help.

Sender Policy Framework / SPF

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Sender Policy Framework / SPF SPF is a system used to tell mail servers which IP addresses can send mail from which domains. It is designed to reduce 'spoofing' of email addresses. For instance, if you receive an email message from your bank, your mail software can check that it came from an IP address authorised to send mail from your bank, and treat the message with suspicion if it didn't come from an authorised IP address.

Settings -> Local Mail -> General

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Settings -> Local Mail -> General The Local Mail -> General page allows you to configure a few simple, but fundamentally important settings. Default Domain In the majority† of cases, this is the domain name that VPOP3 will use when sending automated messages; for instance, users may receive a message from

How to Obtain Error Logs

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to Obtain Error Logs As part of diagnosing a support issue our support team may ask you to send them various log files. This page explains how to obtain the right files at the right time. How Logging Works Under its default settings VPOP3 logs a minimal amount of information about what it is doing to various files in the main VPOP3 directory. When investigating a support issue it is often the case that we will need you to switch on logging to extra files or increase the level of detail be…

Using VPOP3 Spam Filtering with LAN Forwarding

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Using VPOP3 Spam Filtering with LAN Forwarding When using the VPOP3 Spam filter with LAN forwarding you need to be aware a bit of how it works. The spam filter will only quarantine messages which are going to a VPOP3 user. This is because that user needs to be able to log into VPOP3 to be able to view their quarantined messages.

Settings -> Admin Settings

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Settings -> Admin Settings The Admin Settings page allows you to perform three key functions: * * * Choosing a Main Administrator The Main Administrator receives notification emails, such as daily reports and errors/problems which may require manual intervention.

DMARC Reporter Script

Anonymous (anonymous@undisclosed.example.com) — 2023-11-12T09:51:40+00:00

DMARC Reporter Script (from VPOP3 v8.6 onwards) This script lets you customise how VPOP3 sends DMARC reports to the sending domain. This can be useful in case the sending domain's DMARC configuration is incorrect as that can cause errors sending the reports or cause messages to be 'stuck' in VPOP3's Outqueue. These problems won't cause any lasting damage, but may be inconvenient or annoying, so you can alter the behaviour using Lua scripting

Spamrules example - increase spam score for long sender domain

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spamrules example - increase spam score for long sender domain This script is for the case where you to increase the spamminess of emails where the sender's email address contains a long domain. In this case we'll say if the sender's domain has 20 or more characters in the first section (between the @ and first .). Note that we do not necessarily recommend that you do this as it is not a very good indicator of spam, but it is something we've been asked for, so here it is.

User Routing Script

Anonymous (anonymous@undisclosed.example.com) — 2023-03-27T10:32:18+00:00

User Routing Script If there is a /user_redirect.lua script, this Lua script can override VPOP3's message routing options. You can edit this either in the Settings -> Scripts page in the settings, or via the 'Routing' tab in the user's settings in the VPOP3 administration console. This script affects how VPOP3 will handle how messages

Backscatter

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Backscatter In email, “backscatter” is the term used if you send bounce messages back to spam messages. As most spam messages use forged email addresses, then the bounce messages will go to an innocent person, who will find them very annoying. Stopping VPOP3 from sending Backscatter

Signing outgoing mail with DKIM

Anonymous (anonymous@undisclosed.example.com) — 2020-07-22T10:32:40+00:00

Signing outgoing mail with DKIM DKIM, also known as DomainKeys Identified Mail, is a form of email authentication that digitally signs emails to prove that they were sent from authorized domains and aren't fake emails. Companies like Google and Yahoo use DKIM to sign their emails and it is becoming ever more popular.

Settings -> Diagnostics

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Settings -> Diagnostics The Diagnostics page allows you to enable, configure and disable various methods of diagnostic logging, within VPOP3. Log file overview By default, VPOP3 will keep two copies of most log files: * The current log file, with a

ListServer Settings

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

ListServer Settings Settings -> ListServer Settings In VPOP3, the ListServer is an automated 'user' which handles mailing list requests, such as subscribe & unsubscribe commands. Anyone can send an email to the ListServer to subscribe to (public) mailing lists, or unsubscribe from mailing lists they are on, or see a list of public mailing lists etc.

DNSSEC

Anonymous (anonymous@undisclosed.example.com) — 2019-09-19T13:41:29+00:00

DNSSEC DNSSEC (Domain Name System Security Extensions) is used to secure DNS records and prevent them from man-in-the-middle attacks and spoofing. DNSSEC has been around for 10 years, but it has generally not been widely adopted for various reasons, but it is

How to automatically forward spam to the PSCS spamtrap

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to automatically forward spam to the PSCS spamtrap Spam filter companies use “spamtraps” to catch samples of spam for analysis so filters can be updated. We do this here as well. Most types of spam are already caught by our spam traps, however sometimes people get lots of spam which gets through the filter because their particular type of spam does not currently get sent to our spam traps.

Incoming SMTP Feed

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Incoming SMTP Feed An incoming SMTP feed is where incoming mail is sent directly to your mail server without going through your ISP's POP3 mail server on the way. Advantages An incoming SMTP feed has several advantages over going via a POP3 mailbox:

Problems sending messages to spam@

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Problems sending messages to spam@ If a VPOP3 user forwards a message to spam@, then the VPOP3 spam filter will train itself that that message was spam. If, when you forward the message, you get an error message like: Subject: Mail Delivery Failure Delivery Failure Report. The following message was incorrectly addressed. Recipient: "spam" is unrecognised.

Lua SMTP MX Server Rules

Anonymous (anonymous@undisclosed.example.com) — 2026-02-24T15:50:03+00:00

Lua SMTP MX Server Rules Every time VPOP3 checks for remote MX server for sending messages using direct MX sending, it runs a script called mxserverrules.lua which can be created/edited in Settings -> Scripts (or in the VPOP3 directory in VPOP3 v6.6 or earlier).

Route incoming POP3 mail by parsing message headers

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Route incoming POP3 mail by parsing message headers This routing method is generally used if you have a catch-all or 'multi-catch' mailbox with your Internet provider. With this method, VPOP3 will look at the To/Cc and other fields in the message headers to try to work out who the message is for. If the recipient is not listed in the headers (eg for BCCd mail) it may not be able to automatically detect who the message is for.

SMTP Direct Sender Settings

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTP Direct Sender Settings Mail Connectors -> Mail Senders -> SMTP Direct Sender -> Settings tab The SMTP Direct Settings tab lets you set how VPOP3 will send mail using SMTP Direct DNS Servers to Use This setting tells VPOP3 the IP addresses of the DNS servers it should use to find the recipients' mail servers. Separate multiple addresses with commas.

Daily Summary is not reporting all Sent messages

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Daily Summary is not reporting all Sent messages For VPOP3 to log outbound messages it needs to be able to work out that the message is FROM: a user whose mail is handled by the local VPOP3. To do this it has to examine the FROM: address in the message header.

Handling mail for multiple incoming domains

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Handling mail for multiple incoming domains VPOP3 can easily handle mail for several incoming domains. Exactly how you do it depends on the exact situation. All domains are 'aliases' If the domains are aliases of each other, for instance, you have 'mycompany.com' and 'mycompany.org', both of which are the same, so each address at mycompany.com also exists at mycompany.org, and the emails go to the same people regardless of which domain is used, then you simply configure the domains in the ma…

How to make VPOP3 re-download POP3 messages from the ISP

Anonymous (anonymous@undisclosed.example.com) — 2026-04-06T17:57:00+00:00

How to make VPOP3 re-download POP3 messages from the ISP If you have the VPOP3 Mail Collector setting Leave Mail On Server enabled, then VPOP3 will leave your messages on the ISP POP3 server for the specified number of days after downloading it. If, during this time, you want to make VPOP3 download those messages again, then you can do so.

Outbound Messages Not Appearing in Monitor Target Mailbox

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Outbound Messages Not Appearing in Monitor Target Mailbox For VPOP3 to monitor outbound messages it needs to be able to work out that the message is FROM: a user whose mail should be monitored. To do this it has to examine the FROM: address in the message header.

Redirect message for a user if a sender is a particular email address

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Redirect message for a user if a sender is a particular email address Say you want messages addressed to 'user1' to be redirected to 'user2' if they came from customer@domain.com This is an unusual requirement, so there is no way to do it in VPOP3.

Spamfilter Whitelist & Blacklist

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spamfilter Whitelist & Blacklist The VPOP3 spamfilter has a whitelist and a blacklist for sender addresses. It also has a whitelist and blacklist for words/phrases. You can view these lists in the VPOP3 settings by going to Settings -> Spamfilter ->

Groups

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Groups In VPOP3 a 'group' is mainly an administrative feature. If you only wish to have a list of email addresses to send messages to under one address, you should use the 'List' feature instead. The main function of Groups is to let you set certain user attributes for a whole group of users at once.

Lua SMTP MX Control

Anonymous (anonymous@undisclosed.example.com) — 2026-02-24T15:49:48+00:00

Lua SMTP MX Control Every time VPOP3 is going to send messages using direct MX sending, it runs a script called mxout.lua which can be created/edited in Settings -> Scripts (or in the VPOP3 directory in VPOP3 v6.6 or earlier). Global Variables Starting with v8.8, the following global variables are defined:

Misc -> Advanced Tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Misc -> Advanced Tab Settings -> Misc Settings -> Advanced You will normally not need to change any settings on this page unless VPOP3 technical support have suggested it. If you do make changes, and want to go back to the original settings, the Restore Defaults button will restore the settings to their defaults.

Misc -> General Tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Misc -> General Tab VPOP3 Host Name The VPOP3 Host Name is used by VPOP3 when it is telling other mail software what it is called. For instance, when it connects to another SMTP server it will send the host name as the parameter for the HELO or EHLO command, and when an SMTP client connects to VPOP3, it announces its name in the welcome banner as required by the SMTP standard.

Mail Connectors -> Mail Senders -> SMTP Direct

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Mail Connectors -> Mail Senders -> SMTP Direct VPOP3 can be configured to send mail directly to the recipient's mail server (or the recipient's mail service provider). Usually this is only used if you have a high-end business class Internet connection - such as a leased line, or your mail server is co-located in a data centre. Attempts to use SMTP Direct sending on a dial-up/ADSL/Cable/FTTC/etc connection may be problematic since the receiving mail server may think you a home user who has been …

Spam Filter Rules: GetAddressType

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spam Filter Rules: GetAddressType Statement GetAddressType Version 2.4.6+ Purpose Analyses a specified email address and reports what 'type' of address it is The GetAddressType statement requires an email address and variable name, in the format

SMTPSPFWhitelist Replacement

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTPSPFWhitelist Replacement Use: ~smtpspfwhitelist~ ~end~ If you specify the parameter serverid then this will just return white list entries which match all servers or this server. The format string can have the replacements * id - the whitelist entry ID

Changing a user's password

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Changing a user's password To change a user's password in VPOP3, you should log into the VPOP3 settings, go to the 'Users' page, then double-click on the user whose password you want to change. This will bring up a window giving you access to the user's settings. Go to the 'Passwords' tab where you can set the passwords.

How to create an SSL Certificate

Anonymous (anonymous@undisclosed.example.com) — 2026-03-23T10:18:43+00:00

How to create an SSL Certificate VPOP3 Enterprise supports SSL certificates for encrypted sessions. The basic mechanism to create an SSL certificate is that you have to generate a CSR (Certificate Signing Request) then send that to a CA (Certificate Authority) who will sign your certificate and give you the certificate back.

VPOP3 Database Size

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

VPOP3 Database Size The VPOP3 directory is stored in the VPOP3\pgsql\data folder and subfolders. If you are concerned about the size of the VPOP3 database, there are several factors which may make the database larger than you would expect: * The VPOP3 database contains a lot more information than just messages in mailboxes. This can include settings, outgoing messages, historical logging information, statistical information for the spamfilter, information about archived messages, etc. Also,…

Error Message Handling

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Error Message Handling VPOP3 will normally send an error message to the Main Administrator every time it encounters an error. We recommend you leave it like this in most cases - if an error message occurs repeatedly, then it usually means there's an underlying problem which needs resolving rather than ignoring.

"How To" Articles

Anonymous (anonymous@undisclosed.example.com) — 2026-03-18T20:20:50+00:00

"How To" Articles Installation/Upgrades * Download VPOP3 * Install VPOP3 * Move VPOP3 * Upgrade VPOP3 * Upgrade VPOP3 to version 5.x or 6.x from version 4 or earlier * Upgrade VPOP3 to version 7.x from version 6 or earlier * Upgrade VPOP3 to version 8.x from version 7 or earlier * Upgrade VPOP3 to version 9 or later from version 7 or 8 * Performance Requirements * Installation Checklist General Configuration * Initial Configuration * Users * Add an Alias * Create…

How to 'share' domains between Exchange and VPOP3

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to 'share' domains between Exchange and VPOP3 If you want to have a VPOP3 server and Exchange Server using the same email domain, then you need to ensure that Exchange does not think it is 'authoritative' for the domain in question. See for details of how to do this in Exchange 2000 and 2003 (a similar process may be used in later versions of Exchange - contact your Microsoft Support technician if you need more help).

Initial User

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Initial User When you install VPOP3 it will ask you to create an initial user. This counts towards your user count and is created as your initial administrator account. More administrator accounts can be created later if you wish, and you can remove the initial user if you wish.

How to configure Mozilla Thunderbird

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to configure Mozilla Thunderbird This article won't show you all the possible settings in Thunderbird, because there are so many. Thunderbird is one of the most powerful & flexible email clients available at the time of writing, especially if you use IMAP4 (with VPOP3 Enterprise).

Restore selected mail folders or mailbox in VPOP3 v5 or later

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Restore selected mail folders or mailbox in VPOP3 v5 or later (This option is only available in VPOP3 Enterprise) First - if the problem is that messages were deleted very recently (the default is within 3 days), you can probably use the Undelete feature in VPOP3.

Sending mail from different email addresses or domains

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Sending mail from different email addresses or domains VPOP3 does not (by default) place any restrictions on which email addresses or domains you can send mail from. However, there may be external restrictions on which email addresses/domains you can send from. For instance, if you send mail through your ISP's mail server, they may only allow you to send mail from specific addresses, or the domain you send mail from may have a sender policy defined, such as

Using VPOP3 Advanced Features with LAN Forwarding

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Using VPOP3 Advanced Features with LAN Forwarding If you are wanting to use any of VPOP3's advanced features (such as mailing lists, message monitoring, wildcard aliases etc) because you are LAN forwarding to a less capable server, then you will usually need to have VPOP3 do all its normal message routing functions initially, then, as the final stage have it forward the messages on to the other server.

VPOP3 re-downloading old messages from the ISP POP3 server

Anonymous (anonymous@undisclosed.example.com) — 2026-01-05T09:31:47+00:00

VPOP3 re-downloading old messages from the ISP POP3 server If you tell VPOP3's POP3 mail collector to leave messages on the ISP's server for a few days, you may find that sometimes VPOP3 will redownload all the messages from the ISP mailbox again.

Settings -> Attachment Processing

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Settings -> Attachment Processing The Attachment Processing page allows you to configure VPOP3 to perform two distinct functions on messages that contain attachments: * * Filtering The Filtering tab is divided into four main sections: Attachment Filtering

LAN Forwarding Scripting

Anonymous (anonymous@undisclosed.example.com) — 2025-08-20T16:08:40+00:00

LAN Forwarding Scripting (Added in V8.7) This is stored in the 'LanForwarding.lua' script in Settings -> Scripts Pre-send These functions are called before the message is placed in the LAN Forwarding queue There are two global variables set: *

Logging

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Logging Activity Summary Reports You can tell VPOP3 to send you a daily summary report each day. To do this check the box to say Send daily summary logs to, and choose the appropriate user (or “Main Administrator” if you want the reports to be sent to the

Lua Scripting

Anonymous (anonymous@undisclosed.example.com) — 2026-03-26T23:49:01+00:00

Lua Scripting Lua is a simple scripting programming language often used for embedding in other applications. VPOP3 uses it to customise behaviour in places where most people will be happy with the default behaviour, but occasionally people will want to do something more complicated. Rather than having lots of extra options to complicate things for most users, we have opted to go for a more flexible scripting facility.

Lua SMTP Relay Control

Anonymous (anonymous@undisclosed.example.com) — 2025-08-14T09:24:55+00:00

Lua SMTP Relay Control Every time VPOP3 is going to send messages via SMTP Relay, it runs a script called relayout.lua in the VPOP3 directory. Global Variables This script may have global variables, depending on your version of VPOP3. In VPOP3 3.0.0L and later, there are two read-only global variables set at the start of the script:

Message Archive

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Message Archive The Message Archive facility is for VPOP3 to store copies of all messages sent or received. It stores the messages in a central archive store which can be searched by an administrator. The prime purpose of the archive facility is for recording messages in case of possible disputes, as you can see what was sent/received by email. It can also be used as a backup/restore facility in an emergency, but that is not its prime purpose, so it is better to have a proper

Send Admin Message

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Send Admin Message It is possible for administrator users to send a bulk email message to an entire group or list. To begin composing an email, go to the Administration Settings -> Users page, and click Send Admin Message. This should then open a window, which allows you to specify various options.

Mail Sender Advanced Relay Settings

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Mail Sender Advanced Relay Settings SMTP Return Address The SMTP Return Address (or Return Path) is a hidden part of a message which says where bounce messages (and other automated responses) should be sent. (It is not the same as the Reply address

SMTP Reputation Stats

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTP Reputation Stats (Added in v6.20) If you receive email by direct incoming SMTP (not via an ISP or filtering service) then you can tell VPOP3 to report sender reputation statistics back to VPOP3. This is enabled/disabled in the Settings -> Misc Settings page.

SMTP Server -> Spam Reduction

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTP Server -> Spam Reduction The Spam Reduction tab lets you configure various ways VPOP3 can reduce spam and email address spoofing Domainkeys “Domainkeys” is a way of signing a message to show that it comes from the person it claims to come from. The system is too complex to go into here, but it essentially takes key parts of the message header, as well as the message body and creates a PKI digital signature on it, using a 'private key' on your system. The receiving end will find the same…

Spam Filter Rules

Anonymous (anonymous@undisclosed.example.com) — 2023-01-18T15:57:13+00:00

Spam Filter Rules VPOP3 Versions 2.1.7 and later have a built-in spam filter system which supports a simple script language optimised for content- and spam-filtering of email messages. This reference contains a definition of the spam filtering script language supported by VPOP3. Note that as later versions of VPOP3 are released, more language features may be added, so this reference indicates in which version of VPOP3 a particular feature was added.

Spam Filter Rules: DNS

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spam Filter Rules: DNS Statement DNS Version 2.1.11+ Purpose Allows the script to perform an arbitrary DNS lookup, returning the result into a specified variable The DNS statement requires a type, hostname and variable name, in the format DNS

Spam Filter Rules: IfInBag

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spam Filter Rules: IfInBag Statement IfInBag Version 2.3.7+ Purpose Checks if a specified value is in a particular bag The IfInBag statement requires a bag name and value, in the format IfInBag * All IfInBag statements must be followed by an

Spam Filter Rules: StartSURBL

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spam Filter Rules: StartSURBL Statement StartSURBL Version 2.2.1+ Purpose Begins an asynchronous SURBL lookup in advance of the result being required in a subsequent SURBL statement The StartSURBL statement requires a hostname and SURBL zone, in the format

Spam Filter Rules: Variables

Anonymous (anonymous@undisclosed.example.com) — 2023-08-14T16:01:01+00:00

Spam Filter Rules: Variables The VPOP3 spam filter script language supports simple variables. In most places these are specified as ${}, but in some places they are just specified as - for instance where a statement always puts its result into a variable.

Autoresponder

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Autoresponder An autoresponder is a way of automatically replying to messages as they arrive in a user's mailbox. In VPOP3, an incoming message must arrive in a user's mailbox for the autoresponder to trigger. If you use forwards, assistants, mappings, etc to divert a message before it arrives in the mailbox, the autoresponder will never trigger. If you want to use an autoresponder, but not keep the original message, then make sure the message arrives in the mailbox (eg by using an 'Assistant'…

Users

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Users The Users page shows the list of users, as well as giving you some actions which you can perform use the user list. * Import users from file * Import users from Windows * Export users to file * Bulk Add Users * Edit User Welcome Message * Send Admin Message * Edit a User User List Outgoing Messages Just above the main user list is an entry Outgoing Message Queue. Clicking on this will let you see which messages are waiting to be sent out, and you can delete/

UserRuleActions Replacement

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

UserRuleActions Replacement Use: ~userruleactions~ ~end~ Required parameter: Account, RuleId This returns the message rule actions for the specified rule The format string can have the replacements * id - numeric ID of the action * type - action type

Frequently Asked Questions

Anonymous (anonymous@undisclosed.example.com) — 2026-03-18T20:51:33+00:00

Frequently Asked Questions Pre-Sales Questions * What is the difference between VPOP3 Basic/Standard and VPOP3 Enterprise? * Do I have to pay VAT? * Will I receive a VAT invoice? * What are the limitations of the Home User licence Sales Questions * How can I place an order? * Can I add two licences together? * I got a copy of VPOP3 via Trialpay and would like a refund General * How do I get support? * VPOP3 Roadmap * What do I do if I have lost my VPOP3 licence details?…

SMTP Relay Service FAQ

Anonymous (anonymous@undisclosed.example.com) — 2021-06-29T08:35:43+00:00

SMTP Relay Service FAQ We provide an SMTP Relay Service for many of our customers. The price starts from £40 (+VAT if applicable) per year, for up to 5000 messages, or 750MB, per month. How do I order the SMTP Relay Service? To order the SMTP relay service, either email

550/553 Not Permitted error from BT Internet's mail servers

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

550/553 Not Permitted error from BT Internet's mail servers BT Internet's mail servers only allow messages to be sent from 'approved' email addresses. If you try to send messages from other addresses BT's mail servers may return a '550 Not Permitted' error, a '553' error, or may silently discard the message depending on what their server feels like doing today.

Socket Error 10047 - Addresses in the specified family cannot be used with this socket

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Socket Error 10047 - Addresses in the specified family cannot be used with this socket Meaning: Addresses in the specified family cannot be used with this socket This error only normally occurs during VPOP3 startup. There are two main possible reasons for this error:

Allow Remote Access to VPOP3 Mailboxes

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Allow Remote Access to VPOP3 Mailboxes Sometimes people want to be able to access their office VPOP3 mail server from a remote site or mobile phone etc. These instructions assume you have a permanent Internet connection (eg ADSL, Cable etc). If you don't have a permanent Internet connection, see

Archiving not saving messages on a shared drive

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Archiving not saving messages on a shared drive If the VPOP3 archive facility is reporting “Possible error accessing main store directory” and the archive store directory is a drive on another network computer, then there are a few possible difficulties that you have to be aware of.

How to Backup VPOP3

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to Backup VPOP3 By default VPOP3 v3 and later will automatically perform a daily backup of the database into a file called DBBACK-x.DMP, where the backup file rotates on a weekly basis (DBBACK-0.DMP is Sunday's backup, DBBACK-1.DMP is Monday's backup, etc).

Controlling VPOP3 via Email

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Controlling VPOP3 via Email You can control certain aspects of VPOP3 by sending emails to 'mailer_daemon@' The subject line must be one of the lines below: * Set Assistant * Query Assistant * Password * Set Forwarding * Query Forwarding

How to send a fax by email using the VPOP3 FaxServer

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to send a fax by email using the VPOP3 FaxServer VPOP3 2.1.0 and later together with the VPOP3 FaxServer software allows you to send specially crafted emails to VPOP3 to have them sent as faxes. To do this, send an email to fax@ . The email subject will be the subject of the fax used on the fax cover page. The email should be in plain text (not

Error Messages

Anonymous (anonymous@undisclosed.example.com) — 2025-10-06T15:21:37+00:00

Error Messages This is the place to look if you are trying to trouble shoot a problem and you have received or have access to a specific error message or error code. If instead your problem is that something you think is set up correctly is not working then the best place to look would be the

Forwarded Emails Not Arriving

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Forwarded Emails Not Arriving If you are having problems having VPOP3 forward incoming messages to an external address, but sending messages directly to that address works OK, and forwarding internal messages to that address works OK, then the problem may be the SMTP return address which VPOP3 is using.

How to Install VPOP3

Anonymous (anonymous@undisclosed.example.com) — 2021-03-08T10:48:40+00:00

How to Install VPOP3 Simply download VPOP3 from the website, and run the installation program and follow the prompts. Occasionally people may have problems with the PostgreSQL part of the installation. If that happens, please contact us either by email at support@pscs.co.uk or by phone to +44 (0)1484 855800, and we will do our best to help.

SMTP error 'Invalid HELO name'

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTP error 'Invalid HELO name' When sending mail you may get an error from the remote SMTP server saying something like 'Invalid HELO name' This happens if the host name configured in VPOP3 does not look like a valid Internet host name (e.g. 'mail.domain.com'). Some SMTP servers don't bother checking this value because it has no authentication value at all, but a few do check that it looks correct.

Setting up an iPhone/iPad/iPod Touch

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Setting up an iPhone/iPad/iPod Touch To set up an iPhone to access VPOP3's mail, you first of all need to configure VPOP3 to allow access by remote users (unless you will only be using the iPhone in the office, connected via WiFi to the office LAN). Adding the mail account to your iPhone/iPad

Not Working As Expected

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Not Working As Expected This is the page to come to if you think you've set something up correctly but it isn't doing what you think it should be doing. If you're getting an error message or some other concrete indication that something has actually 'gone wrong' then the

How to Obtain Message Headers

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to Obtain Message Headers Most people are familiar with mail headers such as From:, To:, Subject: etc. but there are many more which most people never see. Quite often we need to see the full internet mail headers from an e-mail that is causing problems. This article explains how to get hold of them in some of the more common e-mail clients.

Performance Requirements

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Performance Requirements The performance requirements for VPOP3 depends on many factors, so we can't give specific details for any scenario. How to detect limiting factors * Use the Windows Performance Monitor (perfmon.msc) * Add counters for:

Problems accessing VPOP3 Settings

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Problems accessing VPOP3 Settings If you have problems accessing the VPOP3 settings: * Go to Start -> Programs -> VPOP3 -> Configure VPOP3 on the VPOP3 computer. That should open up a web browser and take you to the login page * If VPOP3 doesn't show the login page, and shows a '403' error page instead, that means that the access restrictions for the WebMail service have been restricted so that this computer cannot access the WebMail service.

Problems sending mail via BT from your own domain

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Problems sending mail via BT from your own domain BT Internet only allow you to send mail through their mail servers from your BT Internet address or other registered address. Attempts to send from other addresses will give you a 553 SMTP error message.

Repairing corrupted database

Anonymous (anonymous@undisclosed.example.com) — 2024-01-15T11:35:45+00:00

Repairing corrupted database With PostgreSQL (as with most high-end databases) the database system will automatically recover after power failures etc, if it can. If it can't then there is no manual 'repair' function, because the data cannot totally be recovered (or it would automatically have been recovered).

How to Set a User as Administrator

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to Set a User as Administrator VPOP3 has two 'types' of administrator. * Users who can administer VPOP3, and log in and change settings etc. These are normal users, but have the Administrator box checked on the User -> General settings for that user. These user have a red key icon in the users list.

Total Rebuild of Database

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Total Rebuild of Database If you suspect database corruption, sometimes the best thing to do is to totally rebuild the database. This involves six steps: * Stop VPOP3 * Backup Database * Delete Database * Re-create Database * Restore/Create Database

Training the VPOP3 Spam Filter

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Training the VPOP3 Spam Filter The VPOP3 spam filter has a couple of mechanisms which can be used to 'train' it to distinguish between spam and not-spam. Bayesian Filter The Bayesian filter this looks at words in messages sent and received and their probabilities of being contained in spam and not-spam, and works out an overall probability of the message being spam or not-spam based on the combination of those probabilities.

How to use the VPOP3 Status Monitor

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to use the VPOP3 Status Monitor The VPOP3 Status Monitor is a small program which displays a postbox icon (usually red) in the Windows notification area (usually at the bottom right of the screen - by the clock). This icon can be used for quick access to various VPOP3 facilities. Note that the Status Monitor is

v3/4 - Move the message store to a new folder/drive

Anonymous (anonymous@undisclosed.example.com) — 2018-12-05T15:25:24+00:00

v3/4 - Move the message store to a new folder/drive This guide assumes you want to just move the VPOP3 message store/database to a new folder on the same PC, and leave the VPOP3 installation directory where it is. * Stop VPOP3 * Stop PostgreSQL

How to move VPOP3 V3 to a new folder

Anonymous (anonymous@undisclosed.example.com) — 2018-12-05T15:25:41+00:00

How to move VPOP3 V3 to a new folder This guide assumes you want to move the whole of VPOP3 (including the message store) to a new folder on the same PC * Stop VPOP3 * Stop PostgreSQL * Remove the PostgreSQL service * Move VPOP3 to the new folder

Move VPOP3 Version 3 or 4 to a new PC

Anonymous (anonymous@undisclosed.example.com) — 2019-11-12T16:09:08+00:00

Move VPOP3 Version 3 or 4 to a new PC Moving VPOP3 Version 3 or 4 to a new PC is slightly different from moving earlier versions, because of the database system. The summary of steps is: * Stop VPOP3 on the original PC * Manually make a backup of the database on the original PC

v5 - Move the message store to a new folder/drive

Anonymous (anonymous@undisclosed.example.com) — 2019-11-12T16:10:42+00:00

v5 - Move the message store to a new folder/drive Here is an alternative method, which may be simpler, but only moves the data, not the whole database store (which is a subtle difference) This guide assumes you want to just move the VPOP3 message store/database to a new folder on the same PC, and leave the VPOP3 installation directory where it is.

How to move VPOP3 V5+ to a new folder

Anonymous (anonymous@undisclosed.example.com) — 2021-03-19T16:01:48+00:00

How to move VPOP3 V5+ to a new folder This guide assumes you want to move the whole of VPOP3 (including the message store) to a new folder on the same PC * Stop VPOP3 * Stop VPOP3DB * Remove the VPOP3DB service * Move VPOP3 to the new folder

Move VPOP3 Version 5 (or later) to a new PC

Anonymous (anonymous@undisclosed.example.com) — 2026-04-21T11:12:40+00:00

Move VPOP3 Version 5 (or later) to a new PC Moving VPOP3 Version 5 or later to a new PC is slightly different from moving earlier versions, because of the database system, which was introduced for version 3 and modified for version 5. The summary of steps is: * Stop VPOP3 on the original PC

Error message: VPOP3 Alert - Non-existent user -

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Error message: VPOP3 Alert - Non-existent user - If you receive an error message like: Subject: VPOP3 Alert - Non-existent user - Delivery Failure Report. There was incoming mail for non-existent user "". This means that VPOP3 downloaded a message using POP3 and it was addressed to an email address which does not exist.

VPOP3 Not Starting Properly

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

VPOP3 Not Starting Properly If VPOP3 is not starting properly, then the first thing to check is whether the database server is starting. In VPOP3 v3 and later, VPOP3 uses a PostgreSQL Database server for data storage, so if the database server is not running, VPOP3 will not be able to start properly. In this case, the VPOP3.EXE process may appear in Task Manager, but it won't respond to anything, or it may appear in Task Manager and then stop after a short period.

VPOP3 Status Monitor Problems

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

VPOP3 Status Monitor Problems The VPOP3 Status Monitor is the program which shows the little (usually red) postbox icon in the Windows task tray. This usually launches automatically from the Windows startup group. This program is VPOP3Status.EXE on the disk, or can be run manually from

AutoresponderInfo Replacement

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

AutoresponderInfo Replacement Use: ~autoresponderinfo~ Required parameter: responderid - the ID of the autoresponder This returns a JSON structure containing the details of the specified autoresponder. The return structure is an object containing:

MessageView4 Replacement

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

MessageView4 Replacement Use: ~messageview4~ Parameters: * “headers” (optional - “y” means show full headers, otherwise show condensed headers) * “msgformat” (optional - specifies format of 'message' in result. “text” means UTF8 text, otherwise UTF8

UserRuleActions Replacement

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

UserRuleActions Replacement Use: ~userruleactions~ ~end~ Required parameter: RuleId This returns the message rule actions for the specified rule The format string can have the replacements * id - numeric ID of the action * type - action type

Address Book tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Address Book tab The Address Book tab within VPOP3 webmail enables you to manage your lists of contacts and add those contacts into a new or existing message. Substantial alterations to the interface were introduced in version 5. Both interfaces are documented.

Database schema used in VPOP3 5.x

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Database schema used in VPOP3 5.x Note that all information in this section is subject to change. We do not guarantee that the database schema will remain constant, even between minor upgrade versions, so use this information at your own risk. Do not alter the database schema used by VPOP3 (including indexes, triggers & functions) or your whole VPOP3 data store may collapse.

IMAP4 -> Advanced tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

IMAP4 -> Advanced tab This page is reached from Services -> IMAP4 Server, then the Advanced tab. Here are some advanced options for the IMAP4 service in VPOP3 Fake access to inaccessible mailboxes In the IMAP4 service you may have folders which do not exist. For instance, if you are accessing a shared Inbox folder from a user called 'Karen', then their folder will be called

Import Users From File

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Import Users From File VPOP3 supports the importation and exportation of users, via a CSV file (see for a specification of the CSV file format). NOTE: This process is not designed to provide a complete backup of user data, nor is it intended to facilitate moving VPOP3 to a new computer. Instead, see the following relevant pages:

Database query to list ALL messages in the LAN forwarding queue

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Database query to list ALL messages in the LAN forwarding queue The VPOP3 settings show the first 100 messages in the LAN forwarding queue. Usually this is sufficient as the LAN forwarding queue is usually nearly empty, but in case of a problem it may be much bigger. The database queries below may help in that situation.

Database query to list failed message sends

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Database query to list failed message sends This will list failed outgoing messages from the last 3 days (with the default VPOP3 settings) At a command prompt in the VPOP3 directory run psql (The password is 'vpop3pass') Then, type select created,returnpath,subject,username || '@' || domain as recipient, latesterror from outqueue.outrecipients inner join outqueue.outmessages using(msgid) where failedtime is not null order by created desc;

Database query to list messages in the LAN forwarding queue waiting to go to a specific server

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Database query to list messages in the LAN forwarding queue waiting to go to a specific server The VPOP3 settings show the first 100 messages in the LAN forwarding queue. Usually this is sufficient as the LAN forwarding queue is usually nearly empty, but in case of a problem it may be much bigger. The database queries below let you list just messages going to a specific server.

Lists

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Lists The Lists section in VPOP3 lets you view and manage the various types of 'List' which VPOP3 supports * Distribution Lists * Mailing Lists * Forwardings * ODBC Mailing Lists * Groups Using a list A list will contain zero or more 'members' (usually email addresses) which can be messaged all at once. To send a message to all the members of a list, you will usually send an email to the listname at a valid domain.

POP3 Client Lua Scripting

Anonymous (anonymous@undisclosed.example.com) — 2023-08-16T07:48:01+00:00

POP3 Client Lua Scripting The POP3 Client Lua Script is called POP3CLT.LUA and is edited in Settings -> Scripts. This script is called whenever VPOP3 runs a POP3 session to download messages from a remote POP3 server. VPOP3 will call the following Lua functions in the script at the following times:

SMTP Server Lua Scripting

Anonymous (anonymous@undisclosed.example.com) — 2025-05-08T08:23:35+00:00

SMTP Server Lua Scripting The SMTP Server Lua Script is called SMTPSVR.LUA and can be edited from the Settings -> Scripts page in the VPOP3 settings. This script is called whenever an instance of the VPOP3 SMTP server is launched - ie whenever someone opens a connection to port 25 on the VPOP3 server to send it a message, whether from a local user or an incoming SMTP message.

Mail tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Mail tab The Mail tab within VPOP3 webmail enables you to manage your sent and received messages. As you can see from the screenshot, the page is divided into three main sections: Menu bar General tab bar Status bar [Mail tab - VPOP3 Version 5 Webmail] Page structure Mail toolbar The Mail toolbar contains the following buttons:

Misc -> DNS Tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Misc -> DNS Tab Settings -> Misc Settings -> DNS The DNS tab lets you specify which DNS servers VPOP3 will use. DNS (Domain Name System) is a system which converts Internet host names (eg www.google.com) into a numeric IP address (eg 1.2.3.4), because all connections on the Internet are actually performed using numeric IP addresses, but it is easier for people to remember names.

New message tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

New message tab The New message tab within VPOP3 webmail is where you prepare, edit and send messages, including replies and forwards. As you can see from the screenshot, the page is divided into two main sections: Menu bar General tab bar Status bar [New message tab - VPOP3 Version 5 Webmail] Page structure New message toolbar

Settings

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Settings * Admin Settings * Anti-virus * Attachment Processing * Autoresponder Settings * Database * Diagnostics * FaxServer * Global Address Book * Global Signature * Groups * Header Processing * Receipts/Urgent Messages * Global Header Modifiers * Legacy Extensions * Listserver Settings * Local Mail * General * Domain Mappings * LAN Forwarding * Configuration * Queue Status * Logging * Message Archive * Message Monitoring * Misc Se…

Spam Filter Rules: SURBL

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spam Filter Rules: SURBL Statement SURBL Version 2.1.7+ Purpose Allows a SURBL lookup on the specified hostname or IP address in the specified SURBL zone, and returns the result into the specified variable The SURBL statement requires a hostname, SURBL zone and variable name, in the format

Status Monitor (port 5109) protocol

Anonymous (anonymous@undisclosed.example.com) — 2019-08-19T08:58:45+00:00

Status Monitor (port 5109) protocol This page documents the protocol used between VPOP3 and the Status Monitor. It's not intended for any other purpose, so it's a bit limited, but in certain cases you may find this useful Login Before the Status Monitor receives any updates or can issue commands it must log in using a user's credentials.

Webmail Menu bar

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Webmail Menu bar The Webmail Menu bar within VPOP3 webmail enables you to quickly perform relevant actions. The Menu has six main headings; of which, three have multiple options. Option Active Function V Notes Message Mail and View Message tabs Opens/closes Message menu

What is IMAP4

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

What is IMAP4 IMAP4 (Internet Mail Access Protocol V4) is a new mail retrieval protocol which can be used as an alternative to the POP3 (Post Office Protocol V3). The main difference between IMAP4 and POP3 is that with POP3 the messages are only stored temporarily on the mail server until they are downloaded to the email client where the messages are stored, manipulated, searched etc. With IMAP4 the messages are stored permanently on the server, and they are manipulated, searched etc on the ma…

Formatting Syntax

Anonymous (anonymous@undisclosed.example.com) — 2026-03-16T16:00:10+00:00

Formatting Syntax DokuWiki supports some simple markup language, which tries to make the datafiles to be as readable as possible. This page contains all possible syntax you may use when editing the pages. Simply have a look at the source of this page by pressing