PSCS Wiki

Exchange 2007

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Exchange 2007 You can link VPOP3 to Exchange Server, so that Exchange Server sends outgoing mail through VPOP3 and VPOP3 sends any incoming mail directly to Exchange Server. You should first of all set up VPOP3 to send and receive Internet email as normal.

Setting up VPOP3 to work with Exchange 2003

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Setting up VPOP3 to work with Exchange 2003 The instructions below are for Exchange Server 2003. For other versions of Exchange see here. You can link VPOP3 to Exchange Server, so that Exchange Server sends outgoing mail through VPOP3 and VPOP3 sends any incoming mail directly to Exchange Server.

Mail Connectors -> Mail Senders -> SMTP Direct

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Mail Connectors -> Mail Senders -> SMTP Direct VPOP3 can be configured to send mail directly to the recipient's mail server (or the recipient's mail service provider). Usually this is only used if you have a high-end business class Internet connection - such as a leased line, or your mail server is co-located in a data centre. Attempts to use SMTP Direct sending on a dial-up/ADSL/Cable/FTTC/etc connection may be problematic since the receiving mail server may think you a home user who has been …

Mappings

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Mappings In VPOP3, Mappings are a way of explicitly linking an email address to a user or list. They can also be used to indicate that an email address is remote, even though it would otherwise appear to be a local email address. In other email servers, a similar feature may be called 'aliases'

How To Allow Mail Relay Through VPOP3

Anonymous (anonymous@undisclosed.example.com) — 2025-05-21T07:57:18+00:00

How To Allow Mail Relay Through VPOP3 If you are allowing remote access into VPOP3 to collect mail then you may also want those remote users to be able to send their outgoing mail through VPOP3 as well. This is more complex than allowing users to collect mail, because, by default, SMTP connections are not authenticated. This means that when someone tries to send a message through VPOP3, VPOP3 doesn't know who that user is. This can cause a problem if unauthorised users try to send mail through…

Sending mail from different email addresses or domains

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Sending mail from different email addresses or domains VPOP3 does not (by default) place any restrictions on which email addresses or domains you can send mail from. However, there may be external restrictions on which email addresses/domains you can send from. For instance, if you send mail through your ISP's mail server, they may only allow you to send mail from specific addresses, or the domain you send mail from may have a sender policy defined, such as

Mail Connectors -> Mail Senders

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Mail Connectors -> Mail Senders The Mail Sender tells VPOP3 how to send mail out to the Internet. If you want to send mail for specific users to another specific mail server (e.g. a local Microsoft Exchange Server or another VPOP3 server) then use the

SMTP -> General tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTP -> General tab This page is reached from Services -> SMTP Server, then the General tab. This page lets you set general settings for the SMTP service component of VPOP3. The SMTP service is how users send outgoing mail, and how incoming SMTP messages arrive. Service Name

Incoming SMTP Feed

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Incoming SMTP Feed An incoming SMTP feed is where incoming mail is sent directly to your mail server without going through your ISP's POP3 mail server on the way. Advantages An incoming SMTP feed has several advantages over going via a POP3 mailbox:

Using VPOP3 with Microsoft Exchange Server

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Using VPOP3 with Microsoft Exchange Server You can link VPOP3 to Exchange Server, so that Exchange Server sends outgoing mail through VPOP3 and VPOP3 sends any incoming mail directly to Exchange Server. You should first of all set up VPOP3 to send and receive Internet email as described in the online help.

French Webmail Language File

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

French Webmail Language File Copy/paste the text below to a file 'french.lng' or 'francais.lng' in the VPOP3 directory. (French users, feel free to update/correct the text below) #login page logintitle=VPOP3 Login webadminlogin=web admin login webmaillogin=web mail login enterusername=You must specify your VPOP3 username here bookmarksnotsupported=I'm sorry, but your web browser does not support this function. You will have to add this page to your bookmarks manually. loginfailed=Login Faile…

German Webmail Language Page

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

German Webmail Language Page Copy/paste the text below to a file 'german.lng' in the VPOP3 directory. (German users, feel free to update/correct the text below) #login page logintitle=VPOP3 Login webadminlogin=web admin login webmaillogin=Webmail Anmeldung enterusername=Sie müssen einen Benutzernamen angeben bookmarksnotsupported=I'm sorry, but your web browser does not support this function. You will have to add this page to your bookmarks manually. loginfailed=Anmeldung fehlgeschlagen …

ListServer Commands

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

ListServer Commands The ListServer is an automated process in VPOP3 which manages mailing lists. People can send commands to the ListServer to perform various functions remotely. Whether these commands are allowed, and exactly how they work depends on the particular mailing list's settings.

Mail tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Mail tab The Mail tab within VPOP3 webmail enables you to manage your sent and received messages. As you can see from the screenshot, the page is divided into three main sections: Menu bar General tab bar Status bar [Mail tab - VPOP3 Version 5 Webmail] Page structure Mail toolbar The Mail toolbar contains the following buttons:

GDPR for VPOP3 self-hosted software

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

GDPR for VPOP3 self-hosted software VPOP3 is an email server program, it is not a service, so if you use VPOP3 on your own computer we are not a “data controller” or a “data processor” under GDPR rules as we never see any of your data (unless you give us permission to remotely connect to your PC for technical support purposes).

Outlook/Windows Messaging reports "No transport provider is available"

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Outlook/Windows Messaging reports "No transport provider is available" If Outlook or Windows Messaging reports No transport provider is available when trying to connect to VPOP3, it can mean several things. (This must be a contender for “the world's most meaningless error message

Sender Policy Framework / SPF

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Sender Policy Framework / SPF SPF is a system used to tell mail servers which IP addresses can send mail from which domains. It is designed to reduce 'spoofing' of email addresses. For instance, if you receive an email message from your bank, your mail software can check that it came from an IP address authorised to send mail from your bank, and treat the message with suspicion if it didn't come from an authorised IP address.

Spanish Webmail Language File

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spanish Webmail Language File Copy/paste the text below to a file 'spanish.lng' or 'espanol.lng' in the VPOP3 directory. (Spanish users, feel free to update/correct the text below) #login page logintitle=VPOP3 Login webadminlogin=web admin login webmaillogin=web mail login enterusername=Especificar aca el usuario de Correo bookmarksnotsupported=Disculpe, pero su navegador no soporta esta funcion. loginfailed=Login Fallido - Favor reintente nuevamente invalidlogin=Detalles del login inválidos…

Mail Collectors

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Mail Collectors A Mail Collector is how you tell VPOP3 to collect incoming mail. Each Mail Collector is associated with one or more Connections. The VPOP3 Connector Schedule determines when each Connection is run. Mail Collector General Tab Each Mail Collector has a General

VPOP3 Webmail Help

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

VPOP3 Webmail Help Webmail is a way of accessing your mail using a normal web browser. It is designed to be close in functionality to a 'normal' email client, so should be straightforward to use. If you use VPOP3 Enterprise, then the mail visible through the web browser will be the same as that visible through your IMAP4 email client - the IMAP4 client will synchronise with Webmail.

POP3 Mail Collection

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

POP3 Mail Collection POP3 Mail Collection is when VPOP3 will collect mail from an external POP3 mailbox - for instance, from an Internet Provider. POP3 General This page tells VPOP3 how to collect mail. * POP3 Server Address - this is the name (or IP address) of the POP3 server from which you want VPOP3 to collect mail

SMTP Service -> Advanced Tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTP Service -> Advanced Tab Services -> SMTP Server -> Advanced Tab Refuse SMTP Connections from This setting should be rarely needed, and should be normally left blank. It is here for historic purposes. If you put some text in this box, then VPOP3 will refuse any SMTP connections from clients whose 'HELO'/'EHLO' command data contains the text specified here as a substring. Eg, if this setting is set to '.myisp.com', then VPOP3 would refuse SMTP connections from any client which sends the c…

Sending mail through your Gmail account

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Sending mail through your Gmail account According to Google, the settings for sending mail through Gmail are: Outgoing Mail (SMTP) Server - requires TLS or SSL: smtp.gmail.com (use authentication) Use Authentication: Yes Port for TLS/STARTTLS: 587 Port for SSL: 465

550/553 Not Permitted error from BT Internet's mail servers

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

550/553 Not Permitted error from BT Internet's mail servers BT Internet's mail servers only allow messages to be sent from 'approved' email addresses. If you try to send messages from other addresses BT's mail servers may return a '550 Not Permitted' error, a '553' error, or may silently discard the message depending on what their server feels like doing today.

Route MX Sent (Direct) Outbound Mail Through Your ISP

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Route MX Sent (Direct) Outbound Mail Through Your ISP Some mail providers (for example Hotmail, AOL and GMail) will reject mail sent from servers running on dynamic IP addresses. It is possible to route such mail through your ISP's relay server whilst still sending most mail direct to the recipient server using MX

Using VPOP3 Spam Filtering with LAN Forwarding

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Using VPOP3 Spam Filtering with LAN Forwarding When using the VPOP3 Spam filter with LAN forwarding you need to be aware a bit of how it works. The spam filter will only quarantine messages which are going to a VPOP3 user. This is because that user needs to be able to log into VPOP3 to be able to view their quarantined messages.

What's new in version 5 webmail?

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

What's new in version 5 webmail? This is a list of some of the most noticeable changes to VPOP3's webmail interface for version 5. For a more detailed list of changes, view our bugtracker. [VPOP3 Version 5 - mobile compatible webmail] Mobile compatible webmail If you access version 5 webmail from a mobile device, you will probably be redirected to the mobile compatible version. It is a cut-down version of Webmail, which retains the key features, but doesn't utilise the extra features which w…

POP3 Protocol

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

POP3 Protocol POP3 is the most basic email protocol for collecting mail which is in common use. Almost all email client programs (such as Microsoft Outlook & Outlook Express, Mozilla Thunderbird, etc) can collect mail using POP3. With POP3, mail is usually downloaded by the email client and stored on the user's local PC. It is then deleted from the mail server, so the only copy is on the user's PC. Any mail folders etc are all managed on the user's PC.

Setting up an iPhone/iPad/iPod Touch

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Setting up an iPhone/iPad/iPod Touch To set up an iPhone to access VPOP3's mail, you first of all need to configure VPOP3 to allow access by remote users (unless you will only be using the iPhone in the office, connected via WiFi to the office LAN). Adding the mail account to your iPhone/iPad

Not Working As Expected

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Not Working As Expected This is the page to come to if you think you've set something up correctly but it isn't doing what you think it should be doing. If you're getting an error message or some other concrete indication that something has actually 'gone wrong' then the

Groups

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Groups In VPOP3 a 'group' is mainly an administrative feature. If you only wish to have a list of email addresses to send messages to under one address, you should use the 'List' feature instead. The main function of Groups is to let you set certain user attributes for a whole group of users at once.

SMTP Server Lua Scripting

Anonymous (anonymous@undisclosed.example.com) — 2025-05-08T08:23:35+00:00

SMTP Server Lua Scripting The SMTP Server Lua Script is called SMTPSVR.LUA and can be edited from the Settings -> Scripts page in the VPOP3 settings. This script is called whenever an instance of the VPOP3 SMTP server is launched - ie whenever someone opens a connection to port 25 on the VPOP3 server to send it a message, whether from a local user or an incoming SMTP message.

Mail Connectors -> Connector Schedule

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Mail Connectors -> Connector Schedule The Connector Schedule tells VPOP3 when to connect to send mail using Mail Senders and collect mail using Mail Collectors. It does not affect incoming SMTP over a permanent connection, or LAN Forwarding. The connection schedule also tells VPOP3 when to check for updates to the

What is Webmail?

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

What is Webmail? “Webmail” is a term used to describe an email client which is accessed through a web page rather than as a standalone program. Some well known services which offer webmail are services such as Hotmail, Yahoo, Gmail etc. All versions of VPOP3 have a Webmail service included as standard.

Outgoing Mail

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Outgoing Mail * Create a Mail Sender * Route MX Sent (Direct) Outbound Mail Through Your ISP's Relay Server * ISP needs SSL connection * ISP needs you to connect on port 587 * ISP needs SMTP Authentication * ISP Needs POP3 Before SMTP Authentication * Limit size of sent mail * Require SMTP Authentication when users send mail to VPOP3 * Sending different users' mail through different ISP relay accounts * Restricting number of messages sent (per hour etc) * Restricting numbe…

Misc -> Advanced Tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Misc -> Advanced Tab Settings -> Misc Settings -> Advanced You will normally not need to change any settings on this page unless VPOP3 technical support have suggested it. If you do make changes, and want to go back to the original settings, the Restore Defaults button will restore the settings to their defaults.

GDPR for hosted VPOP3 service

Anonymous (anonymous@undisclosed.example.com) — 2025-10-14T15:43:01+00:00

GDPR for hosted VPOP3 service (Since Brexit, the UK has “UK GDPR” instead of “EU GDPR”, so this document refers to UK GDPR) Also see GDPR for VPOP3 as most of that applies to the VPOP3 hosting service as well. This Data Processing Agreement is part of our hosted VPOP3 service terms. You can view the revision history by clicking on the 'clock' icon to the right.

Address Book tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Address Book tab The Address Book tab within VPOP3 webmail enables you to manage your lists of contacts and add those contacts into a new or existing message. Substantial alterations to the interface were introduced in version 5. Both interfaces are documented.

Incoming SMTP Mail

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Incoming SMTP Mail If you have an incoming SMTP mail feed, then the mail server sending mail to you will connect to your VPOP3 computer to send the mail. The mail connection is controlled by the sending computer. IMPORTANT If you have a permanent Internet connection with a static IP address, the usual way of having incoming SMTP is to configure your

Lua SMTP MX Control

Anonymous (anonymous@undisclosed.example.com) — 2026-02-24T15:49:48+00:00

Lua SMTP MX Control Every time VPOP3 is going to send messages using direct MX sending, it runs a script called mxout.lua which can be created/edited in Settings -> Scripts (or in the VPOP3 directory in VPOP3 v6.6 or earlier). Global Variables Starting with v8.8, the following global variables are defined:

SMTP Reputation Stats

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTP Reputation Stats (Added in v6.20) If you receive email by direct incoming SMTP (not via an ISP or filtering service) then you can tell VPOP3 to report sender reputation statistics back to VPOP3. This is enabled/disabled in the Settings -> Misc Settings page.

Backscatter

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Backscatter In email, “backscatter” is the term used if you send bounce messages back to spam messages. As most spam messages use forged email addresses, then the bounce messages will go to an innocent person, who will find them very annoying. Stopping VPOP3 from sending Backscatter

Using a Mobile Phone with VPOP3

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Using a Mobile Phone with VPOP3 Many people want to use a mobile phone to send/receive their email nowadays. This is usually easy to do with VPOP3. The recommended way is to have the phone connect directly to VPOP3 for sending/receiving email. To do this, you need to do three things:

Webmail Menu bar

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Webmail Menu bar The Webmail Menu bar within VPOP3 webmail enables you to quickly perform relevant actions. The Menu has six main headings; of which, three have multiple options. Option Active Function V Notes Message Mail and View Message tabs Opens/closes Message menu

Webmail Tabs

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Webmail Tabs From version 4 onwards, VPOP3 webmail has a tabbed structure, which enables you to move between various screens with minimal effort. By using tabs, the entire webmail can be loaded in one go - so there is no need to waste time and bandwidth by downloading the same key components each time you switch between the various parts of the webmail.

What is IMAP4

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

What is IMAP4 IMAP4 (Internet Mail Access Protocol V4) is a new mail retrieval protocol which can be used as an alternative to the POP3 (Post Office Protocol V3). The main difference between IMAP4 and POP3 is that with POP3 the messages are only stored temporarily on the mail server until they are downloaded to the email client where the messages are stored, manipulated, searched etc. With IMAP4 the messages are stored permanently on the server, and they are manipulated, searched etc on the ma…

SMTP Relay Service FAQ

Anonymous (anonymous@undisclosed.example.com) — 2021-06-29T08:35:43+00:00

SMTP Relay Service FAQ We provide an SMTP Relay Service for many of our customers. The price starts from £40 (+VAT if applicable) per year, for up to 5000 messages, or 750MB, per month. How do I order the SMTP Relay Service? To order the SMTP relay service, either email

How to create a Mail Sender

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to create a Mail Sender In VPOP3 a Mail Sender tells VPOP3 how to send mail out to another mail server, usually for sending mail across the Internet. To create a mail sender, go to the VPOP3 Settings, then Mail Connectors. In the Mail Senders section on the left, choose

How To Encrypt Sessions

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How To Encrypt Sessions VPOP3 Enterprise 2.6 and later supports SSL/STARTTLS encrypted sessions to VPOP3 itself. So, the email client or web browser will encrypt the data passed to VPOP3 so it cannot be intercepted. This requires an SSL Certificate to be created for VPOP3.

How to make VPOP3 re-download POP3 messages from the ISP

Anonymous (anonymous@undisclosed.example.com) — 2026-04-06T17:57:00+00:00

How to make VPOP3 re-download POP3 messages from the ISP If you have the VPOP3 Mail Collector setting Leave Mail On Server enabled, then VPOP3 will leave your messages on the ISP POP3 server for the specified number of days after downloading it. If, during this time, you want to make VPOP3 download those messages again, then you can do so.

VPOP3 - POP3 Client Problem

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

VPOP3 - POP3 Client Problem These errors occur whilst VPOP3 is communicating with your ISP's POP3 mail server to retrieve your mail. The server connection was closed unexpectedly If the message text is Error with Pop3 Client (XXXX (YY)) The server connection was closed unexpectedly

Import Users From File

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Import Users From File VPOP3 supports the importation and exportation of users, via a CSV file (see for a specification of the CSV file format). NOTE: This process is not designed to provide a complete backup of user data, nor is it intended to facilitate moving VPOP3 to a new computer. Instead, see the following relevant pages:

Lists

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Lists The Lists section in VPOP3 lets you view and manage the various types of 'List' which VPOP3 supports * Distribution Lists * Mailing Lists * Forwardings * ODBC Mailing Lists * Groups Using a list A list will contain zero or more 'members' (usually email addresses) which can be messaged all at once. To send a message to all the members of a list, you will usually send an email to the listname at a valid domain.

Settings -> Local Mail -> General

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Settings -> Local Mail -> General The Local Mail -> General page allows you to configure a few simple, but fundamentally important settings. Default Domain In the majority† of cases, this is the domain name that VPOP3 will use when sending automated messages; for instance, users may receive a message from

Lua SMTP Relay Control

Anonymous (anonymous@undisclosed.example.com) — 2025-08-14T09:24:55+00:00

Lua SMTP Relay Control Every time VPOP3 is going to send messages via SMTP Relay, it runs a script called relayout.lua in the VPOP3 directory. Global Variables This script may have global variables, depending on your version of VPOP3. In VPOP3 3.0.0L and later, there are two read-only global variables set at the start of the script:

Encryption

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Encryption There are several different encryption methods used on the Internet which are relevant to VPOP3. Current versions of VPOP3 Basic will be able to connect to other POP3 or SMTP servers using either SSL or TLS. This allows you to use VPOP3 to access services such as GMail which require SSL/TLS.

Initial Configuration Tasks

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Initial Configuration Tasks After installing VPOP3, you will need to get into the VPOP3 settings. The easiest way of doing this is to find the VPOP3 Status Monitor in the Windows task tray. Right-click this icon, and choose 'VPOP3 Settings'. (If that doesn't work, see this article to troubleshoot Status Monitor problems). Alternatively, on the VPOP3 PC, you can go to Start

VPOP3 - SMTP Client Problem

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

VPOP3 - SMTP Client Problem These errors occur whilst VPOP3 is communicating with your ISP's SMTP mail server to send your mail. If the message text is: Error with SMTP Client (XXXX (YY)) The server connection was closed unexpectedly Then this means that the the connection between VPOP3 and your ISP's SMTP mail server was closed when VPOP3 did not expect it to be. This can be caused by the network connection failing or a bug in the ISP's mail server which drops the connection in abnormal circ…

Spamfilter Whitelist & Blacklist

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spamfilter Whitelist & Blacklist The VPOP3 spamfilter has a whitelist and a blacklist for sender addresses. It also has a whitelist and blacklist for words/phrases. You can view these lists in the VPOP3 settings by going to Settings -> Spamfilter ->

Mail Connectors

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Mail Connectors Mail Connectors tell VPOP3 how to send and receive mail from the outside world, or other mail servers. This page lets you set: * Connections - how VPOP3 connects to the outside world * Mail Collectors - how VPOP3 collects mail from remote mail servers *

SMTP Direct Sender Settings

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTP Direct Sender Settings Mail Connectors -> Mail Senders -> SMTP Direct Sender -> Settings tab The SMTP Direct Settings tab lets you set how VPOP3 will send mail using SMTP Direct DNS Servers to Use This setting tells VPOP3 the IP addresses of the DNS servers it should use to find the recipients' mail servers. Separate multiple addresses with commas.

Webmail Server

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Webmail Server This page lets you configure the Webmail server component of VPOP3. This is how users can access their mail through a web browser, access their spam quarantine, and also how administrators configure VPOP3. This page has 5 tabs: *

Allow Remote Access to VPOP3 Mailboxes

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Allow Remote Access to VPOP3 Mailboxes Sometimes people want to be able to access their office VPOP3 mail server from a remote site or mobile phone etc. These instructions assume you have a permanent Internet connection (eg ADSL, Cable etc). If you don't have a permanent Internet connection, see

Forwarded Emails Not Arriving

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Forwarded Emails Not Arriving If you are having problems having VPOP3 forward incoming messages to an external address, but sending messages directly to that address works OK, and forwarding internal messages to that address works OK, then the problem may be the SMTP return address which VPOP3 is using.

How to tell VPOP3 that some users in the local domain are not to be handled by VPOP3

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to tell VPOP3 that some users in the local domain are not to be handled by VPOP3 In some situations you will have a situation where most of your users are handled by VPOP3, but several users will collect their mail directly from a separate POP3 account on your ISP, even though they may have an email address on the same domain as other users.

Incoming Mail

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Incoming Mail Incoming mail is configured through Mail Collectors (on Mail Connectors -> Mail Collectors) * Create a Mail Collector * Delete a Mail Collector or Connection * Handling mail for multiple incoming domains * Custom filtering incoming mail

How to configure Mozilla Thunderbird

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to configure Mozilla Thunderbird This article won't show you all the possible settings in Thunderbird, because there are so many. Thunderbird is one of the most powerful & flexible email clients available at the time of writing, especially if you use IMAP4 (with VPOP3 Enterprise).

Problems accessing VPOP3 Settings

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Problems accessing VPOP3 Settings If you have problems accessing the VPOP3 settings: * Go to Start -> Programs -> VPOP3 -> Configure VPOP3 on the VPOP3 computer. That should open up a web browser and take you to the login page * If VPOP3 doesn't show the login page, and shows a '403' error page instead, that means that the access restrictions for the WebMail service have been restricted so that this computer cannot access the WebMail service.

Require SMTP Authentication

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Require SMTP Authentication There are some situations where VPOP3 needs to know who is sending mail. This may be if you have VPOP3 configured to behave differently depending on who is sending messages - eg if you have different message size limits depending on the sender, or if you have message monitoring configured for certain users, or you don't want certain people to be able to send mail at all.

Seeing where a message came from

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Seeing where a message came from Sometimes you need to check to see where a message really came from. The 'From:' email address is easily forged, so that cannot be relied upon. The first thing you have to do is to get the full message headers. These may look daunting, but are very useful for problem diagnosis.

Autoresponder Global Scripting

Anonymous (anonymous@undisclosed.example.com) — 2026-03-23T15:29:29+00:00

Autoresponder Global Scripting For scripting to modify the autoresponder text which is embedded in the autoresponder itself, see Autoresponder Scripting The Autoresponder Global Script is executed for every autoresponse. It is stored in the 'Autoresponder.lua' script in Settings → Scripts

Error Handling Scripting

Anonymous (anonymous@undisclosed.example.com) — 2023-11-20T10:18:01+00:00

Error Handling Scripting For most error messages that VPOP3 generates, it allows control of error messages, eg to limit the frequency of error messages if they would be generated repeatedly. These limits are set in Settings -> Admin Settings -> Message Control. However, if you want more granular control, you can use Lua scripting for more fine-grained control

LAN Forwarding Scripting

Anonymous (anonymous@undisclosed.example.com) — 2025-08-20T16:08:40+00:00

LAN Forwarding Scripting (Added in V8.7) This is stored in the 'LanForwarding.lua' script in Settings -> Scripts Pre-send These functions are called before the message is placed in the LAN Forwarding queue There are two global variables set: *

Mail Sender Advanced Settings

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Mail Sender Advanced Settings Mail Connectors -> Mail Senders -> (name) -> Advanced Advanced Domain Filtering For VPOP3 v6.11 and later, see the Domain Filtering section of the user manual. The Domain Filtering box lets you restrict which email messages are sent via this Mail Sender. You specify each rule on a separate line, and the message will be sent if it matches any sender rule

Webmail -> Advanced tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Webmail -> Advanced tab This page is reached from Services -> Webmail Server, then the Advanced tab. Here you can set various options for the VPOP3 Webmail/settings service. Allow Password in URL If you check this option, then you can specify the user's password in a

IMAP4 Mail Protocol

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

IMAP4 Mail Protocol IMAP4 (Internet Mail Access Protocol version 4) is a more advanced protocol than POP3. With IMAP4 your mail is stored and manipulated on the mail server. So, if you move a message from one folder to the other, the message is moved on the server. If you send a message, your mail client will (usually) put a copy into your 'Sent Items' folder. If you delete a message, it is deleted from the server, and so on.

550 5.7.1 Relaying not allowed! Bad sender IP address

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

550 5.7.1 Relaying not allowed! Bad sender IP address This SMTP error message means that the computer which is sending the message is not permitted to send outgoing messages based on the VPOP3 SMTP Service's Access Restrictions. This is probably because someone is trying to send messages from outside your local network, and you have not configured VPOP3 to allow this. You have to be careful when allowing this, because you may configure VPOP3 to be an open-relay, which is a

Configure Email Signatures

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Configure Email Signatures * Global Signatures * Personal Signatures * Webmail Signatures Notes When creating a signature it is generally best to keep it as short as possible. Disclaimers & confidentiality notices in emails are generally regarded as having little or no legal significance, so lengthy signatures just use up bandwidth.

How to Forward Messages to an External Address

Anonymous (anonymous@undisclosed.example.com) — 2025-08-18T15:13:06+00:00

How to Forward Messages to an External Address There are two possible methods to forward messages to an external address: * Use this method if it is for a person who might want to receive their email whilst in the office and/or get the mail sent to an external address.

Handling mail for multiple incoming domains

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Handling mail for multiple incoming domains VPOP3 can easily handle mail for several incoming domains. Exactly how you do it depends on the exact situation. All domains are 'aliases' If the domains are aliases of each other, for instance, you have 'mycompany.com' and 'mycompany.org', both of which are the same, so each address at mycompany.com also exists at mycompany.org, and the emails go to the same people regardless of which domain is used, then you simply configure the domains in the ma…

How to Obtain Message Headers

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to Obtain Message Headers Most people are familiar with mail headers such as From:, To:, Subject: etc. but there are many more which most people never see. Quite often we need to see the full internet mail headers from an e-mail that is causing problems. This article explains how to get hold of them in some of the more common e-mail clients.

VPOP3 Is Responding Slowly

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

VPOP3 Is Responding Slowly If VPOP3 is responding slowly to users there are several common causes: * The VPOP3 server disk may be badly fragmented. Defragment the server disk(s). Note that sometimes the Windows defragmenter will say that the disk doesn't need defragmenting even if it does, so it is best to do it anyway. Also, there is a better free defragmenter available called

Connections

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Connections In VPOP3 a Connection tells VPOP3 how to 'connect' to the Internet. VPOP3 supports up to 10 Connections, which can be either network connections or Dial-Up connections (using a modem) A Connection is linked to one Mail Sender and zero or more Mail Collectors.

Misc -> General Tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Misc -> General Tab VPOP3 Host Name The VPOP3 Host Name is used by VPOP3 when it is telling other mail software what it is called. For instance, when it connects to another SMTP server it will send the host name as the parameter for the HELO or EHLO command, and when an SMTP client connects to VPOP3, it announces its name in the welcome banner as required by the SMTP standard.

Permissions

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Permissions This section lets you configure the permissions that a particular user has. Allowed Protocols The Allowed Protocols section lets you specify which services this user has access to. Note that these settings affect access to the whole service. If you want users to be able to access a service from some IP addresses, but not from others, then use the

How do I write an email to technical support?

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How do I write an email to technical support? Please send the email to support@pscs.co.uk Note that free technical support is currently only available for version 3.0 and later When sending the email, please make sure you include all relevant information:

550 5.7.1 Unable to Relay for...

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

550 5.7.1 Unable to Relay for... When trying to send emails from your email client software you get an error in your email client 550 5.7.1 Unable to relay for ... This error is happening because you have installed the Microsoft IIS SMTP Service, and your email client is talking to that service rather than to VPOP3.

Data stream contained NUL character

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Data stream contained NUL character Description of the problem NUL characters (bytes with value 0) are not allowed in email messages and should not be transmitted over POP3, SMTP or IMAP4 except in certain circumstances. If an attachment contains such a byte it must be encoded using

How to Install VPOP3

Anonymous (anonymous@undisclosed.example.com) — 2021-03-08T10:48:40+00:00

How to Install VPOP3 Simply download VPOP3 from the website, and run the installation program and follow the prompts. Occasionally people may have problems with the PostgreSQL part of the installation. If that happens, please contact us either by email at support@pscs.co.uk or by phone to +44 (0)1484 855800, and we will do our best to help.

The ISP needs POP3 before SMTP authentication

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

The ISP needs POP3 before SMTP authentication Some ISPs (especially in Germany) require you to log on to collect your POP3 mail before they will allow you to send any mail through their SMTP relay servers. VPOP3 actually connects to the POP3 server and SMTP server at the same time, so usually it will not have successfully logged onto the ISP's POP3 server before it tries to start sending mail.

How to Obtain Error Logs

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to Obtain Error Logs As part of diagnosing a support issue our support team may ask you to send them various log files. This page explains how to obtain the right files at the right time. How Logging Works Under its default settings VPOP3 logs a minimal amount of information about what it is doing to various files in the main VPOP3 directory. When investigating a support issue it is often the case that we will need you to switch on logging to extra files or increase the level of detail be…

Out of Disk Space When Sending Mail

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Out of Disk Space When Sending Mail The first thing you should do is check that there is enough free disk space on the disk where VPOP3 is installed. VPOP3 requires a certain amount of free space before it will allow new messages to be sent, so the disk might not be totally full, but VPOP3 will still report that there is insufficient disk space when you try to send a new message. This buffer zone is designed to help prevent the disk totally filling up, which can cause lots of bigger problems!

Setup steps for multiple POP3 accounts at the ISP

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Setup steps for multiple POP3 accounts at the ISP * Set up all the local users you need in the 'Users' page in the VPOP3 settings. The usernames & passwords do not have to have any relation to the ISP's accounts. These are the details which the users will put in their email clients (eg Outlook) to collect their mail from VPOP3.

Transmission Receipt Message

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Transmission Receipt Message This is not an error message, but we are listing it here because it confuses some people. VPOP3 sends a 'Transmission Receipt' when a message is sent out, and it contains a header asking for the receipt. The default configuration is that it will send the transmission receipt if the sender asks for a read receipt.

SMTP Relay Protection in VPOP3

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTP Relay Protection in VPOP3 SMTP Relay Protection should be used on ALL SMTP mail servers (such as VPOP3) which have a permanent connection to the Internet. You may also want to use it on servers which are only connected occasionally via a dial-up connection.

Settings -> Diagnostics

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Settings -> Diagnostics The Diagnostics page allows you to enable, configure and disable various methods of diagnostic logging, within VPOP3. Log file overview By default, VPOP3 will keep two copies of most log files: * The current log file, with a

New message tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

New message tab The New message tab within VPOP3 webmail is where you prepare, edit and send messages, including replies and forwards. As you can see from the screenshot, the page is divided into two main sections: Menu bar General tab bar Status bar [New message tab - VPOP3 Version 5 Webmail] Page structure New message toolbar

Quarantine tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Quarantine tab The Quarantine tab within VPOP3 webmail is where you view and manage messages that have been quarantined by VPOP3's spam filter. As you can see from the screenshot, unlike many of the other webmail tabs, it is not divided into multiple sections:

Mail Sender Advanced Relay Settings

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Mail Sender Advanced Relay Settings SMTP Return Address The SMTP Return Address (or Return Path) is a hidden part of a message which says where bounce messages (and other automated responses) should be sent. (It is not the same as the Reply address

How do I get support?

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How do I get support? You can get support for our software products in several ways. By telephone * You can purchase an annual priority support contract. The cost depends on your current VPOP3 licence, and costs 50% of the licence price per year (with a minimum of £100) per software licence (+VAT if applicable) . This entitles you to software upgrades, remote support and telephone support during UK office hours and priority email support where we aim to respond to your email within 3 hours …

VPOP3 Concepts

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

VPOP3 Concepts Many questions we are asked are because people aren't clear about some of the 'concepts' or 'objects' in VPOP3. So here we explain what these things are: * User (or Account) * Mapping (or Alias) * Mail Collector (or InMail) * Mail Sender (or OutMail) * IMAP4

Windows Server Port Conflicts

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Windows Server Port Conflicts LDAP Server Conflict When you run VPOP3 on a server edition of Windows you may receive an error saying LDAP server not started - couldn't bind socket port 389 (10048) This error happens because VPOP3 contains an LDAP (Lightweight Directory Access Protocol) server for its global address book functionality, and the Windows 2000/2003 'Active Directory Service' also uses LDAP as its mechanism. These two services are conflicting.

Accepting Incoming SMTP through a router

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Accepting Incoming SMTP through a router If your ISP is providing you with an SMTP mail feed (incoming SMTP) and you have VPOP3 connecting to the ISP through a router then you will probably need to modify the router configuration to allow this. Most routers' default configuration will only allow outbound connections (ie connections from the local network out to the Internet). If you need to accept incoming SMTP mail, then you need to tell the router to allow inbound connections on port 25 for …

Copy Outgoing mail

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Copy Outgoing mail Sometimes people need to copy outgoing mail for various reasons. There are several ways of doing this in VPOP3 depending on your exact requirements: * Message Monitoring - this copies all outgoing, incoming and/or internal mail sent by/to specific users to another specific user

How to create an SSL Certificate

Anonymous (anonymous@undisclosed.example.com) — 2026-03-23T10:18:43+00:00

How to create an SSL Certificate VPOP3 Enterprise supports SSL certificates for encrypted sessions. The basic mechanism to create an SSL certificate is that you have to generate a CSR (Certificate Signing Request) then send that to a CA (Certificate Authority) who will sign your certificate and give you the certificate back.

How to send a fax by email using the VPOP3 FaxServer

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to send a fax by email using the VPOP3 FaxServer VPOP3 2.1.0 and later together with the VPOP3 FaxServer software allows you to send specially crafted emails to VPOP3 to have them sent as faxes. To do this, send an email to fax@ . The email subject will be the subject of the fax used on the fax cover page. The email should be in plain text (not

-ERR Unknown User

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

-ERR Unknown User -ERR Unknown User is a POP3 error. There are two places you can receive it: * If you receive it as part of a 'POP3 Client Error' email message from VPOP3, then it means that VPOP3 was unable to log on to your ISP's mail server because the ISP POP3 server reported an error

"How To" Articles

Anonymous (anonymous@undisclosed.example.com) — 2026-03-18T20:20:50+00:00

"How To" Articles Installation/Upgrades * Download VPOP3 * Install VPOP3 * Move VPOP3 * Upgrade VPOP3 * Upgrade VPOP3 to version 5.x or 6.x from version 4 or earlier * Upgrade VPOP3 to version 7.x from version 6 or earlier * Upgrade VPOP3 to version 8.x from version 7 or earlier * Upgrade VPOP3 to version 9 or later from version 7 or 8 * Performance Requirements * Installation Checklist General Configuration * Initial Configuration * Users * Add an Alias * Create…

Inbox size is zero but mailbox size is not zero

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Inbox size is zero but mailbox size is not zero In the VPOP3 settings sometimes, on the user account list the “Inbox Count” is shown as zero, but the “Mailbox Size” is not zero. This is not a bug, or mistake - the two figures are showing different things.

How to limit size of sent mail

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to limit size of sent mail There are several ways to limit the size of mail which can be sent * Limit the size of mail accepted by the SMTP component of VPOP3 * Limit the size sent for a particular user * Limit size based on 'rules' * Limit size based on

Mail Not Downloading From ISP

Anonymous (anonymous@undisclosed.example.com) — 2026-04-06T17:59:47+00:00

Mail Not Downloading From ISP This normally happens because you have told VPOP3 to Leave Messages On Server (on the Mail Connectors -> Mail Collectors -> (name) -> POP3 General tab). If you do this, VPOP3 will leave messages on the ISP's mail server for several days, and remember that it has already downloaded them. Then, the next time it connects it will see that there are some messages waiting, but it may find that it has already downloaded them, so it won't download them again.

How to move messages between users

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to move messages between users There are several ways to do this, depending on your exact needs Via Administrator Console You can view a user's 'Inbox' messages by clicking on the message count on the Users list, then select the messages, choose the target user, and press the

MX Send Warning - .....

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

MX Send Warning - ..... If you see the text 'MX Send Warning - ' in the VPOP3 status monitor, that means that VPOP3 is trying to send a message to another mail server using the MX send method (direct to the recipient's mail server) and

RBL Checking not working in VPOP3 Enterprise

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

RBL Checking not working in VPOP3 Enterprise VPOP3 Enterprise has an RBL checking feature which is configured in the VPOP3 Settings at Services -> SMTP Server -> SPAM Reduction -> Realtime Blacklist Rules If it does not seem to be working properly, there are a few reasons why the RBL feature may not work.

Restricting the number of recipients sent to

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Restricting the number of recipients sent to Some ISPs set restrictions on the number of recipients that you are allowed to send in a certain time period, eg 50 messages per hour, or the number of recipients that you are allowed to send per message or per connection.

Sharing IMAP4 folders

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Sharing IMAP4 folders Some email clients will allow you to share IMAP4 folders from within the client itself (eg eM Client) or have plugins to allow this (eg Mozilla Thunderbird with the Imap-ACL extension). In that case, you will need to see the documentation for that to set up sharing.

Use Download Rules for incoming POP3 message filtering

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Use Download Rules for incoming POP3 message filtering If you have VPOP3 retrieving messages from a POP3 account on an ISP, then you can use Download Rules to do basic filtering on incoming messages. (If you have incoming SMTP, then use SMTP Rules instead) Download rules cannot perform all mail filtering tasks. For more features,

How To Setup VPOP3 Service Security

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How To Setup VPOP3 Service Security VPOP3 can be configured to restrict access to its various services depending on the client computer's IP address. This is useful if you want to allow access from only certain IP addresses (eg within your LAN) and prevent access from other IP addresses (eg the Internet).

Mail Connectors -> Mail Senders -> SMTP Relay

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Mail Connectors -> Mail Senders -> SMTP Relay VPOP3 can be configured to send through an SMTP Relay server (sometimes known as a smarthost). This is the usual configuration for small/medium sized businesses and home users. If you have a dial-up, ADSL, Cable, FTTC etc connection, then your Internet Provider will normally give you access to their SMTP relay service.

Spam Filter Rules

Anonymous (anonymous@undisclosed.example.com) — 2023-01-18T15:57:13+00:00

Spam Filter Rules VPOP3 Versions 2.1.7 and later have a built-in spam filter system which supports a simple script language optimised for content- and spam-filtering of email messages. This reference contains a definition of the spam filtering script language supported by VPOP3. Note that as later versions of VPOP3 are released, more language features may be added, so this reference indicates in which version of VPOP3 a particular feature was added.

Spamfilter.Whitelist table

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spamfilter.Whitelist table The Spamfilter.Whitelist table contains the spamfilter whitelist entries which do not contain wildcards or regular expressions. They are separated out to speed up checking. Columns * address - this is the email address in the whitelist

Spam Filter Rules: GetAddressType

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spam Filter Rules: GetAddressType Statement GetAddressType Version 2.4.6+ Purpose Analyses a specified email address and reports what 'type' of address it is The GetAddressType statement requires an email address and variable name, in the format

Temporary Files

Anonymous (anonymous@undisclosed.example.com) — 2026-02-19T17:56:27+00:00

Temporary Files This is for files in the VPOP3\_temp folder Most of the filename is the hexadecimal timestamp (in Windows 'FILETIME'/65536 form) with a 4 digit hex sequential number afterwards. The first letter or two (usually G-Z) can tell something about what caused the file.

Lost Licence Details

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Lost Licence Details If you have lost your VPOP3 licence key, we will be able to find it for you, but we do have to make a nominal charge of £5.00 (+ VAT if applicable) to search for it as it is a time consuming task. If you need us to do this search, then email sales@pscs.co.uk.

What is the VPOP3 Antivirus solution?

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

What is the VPOP3 Antivirus solution? “VPOP3 Antivirus” is a new product to replace the avast! for VPOP3 product which will no longer be supported after the end of 2012. VPOP3 Antivirus uses the popular 'ClamAV' virus scanner to scan incoming and outgoing messages for viruses.

What are the limitations of the Home User licence

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

What are the limitations of the Home User licence The VPOP3 Home User licence allows you to have up to 5 users for a lower price than the standard 5 user licence, but there are some restrictions in functionality. These are described below: * There is no Mailing List Server (you can still have distribution lists)

What is the difference between VPOP3 Basic and VPOP3 Enterprise?

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

What is the difference between VPOP3 Basic and VPOP3 Enterprise? VPOP3 Enterprise includes all the features of VPOP3 Basic, plus: * IMAP4 mail support as well as POP3, SMTP and Webmail * Support for database (ODBC) links for the Global Address Book and Mailing Lists. * Shared calendars & webmail address books

Socket Error 10503 - No More Data

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Socket Error 10503 - No More Data Error 10503 means that the connection between VPOP3 and a remote computer (normally your ISP) was dropped at an unexpected time. This is different from the error 10054 in that this is a controlled line drop. One way this can happen is if the ISP's POP3 server uses an obsolete standard which allows it to drop the connection if a POP3 'LIST' command is performed on an empty mailbox. The current standard requires that the connection is not dropped until the clien…

How to Access VPOP3's WebMail

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to Access VPOP3's WebMail To access the VPOP3 WebMail facility open up a web browser and, in the address box type http://:5108 Then, enter the relevant VPOP3 username & password See: VPOP3 Webmail Help, Allowing remote access to webmail

Android - Stock Client

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Android - Stock Client Warning If you use the stock email client from Android 4.x, then be VERY careful if you are using POP3 download. It appears that the stock client will download all the messages from your mail server every time it checks for mail, so you could use a

How to automatically forward spam to the PSCS spamtrap

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to automatically forward spam to the PSCS spamtrap Spam filter companies use “spamtraps” to catch samples of spam for analysis so filters can be updated. We do this here as well. Most types of spam are already caught by our spam traps, however sometimes people get lots of spam which gets through the filter because their particular type of spam does not currently get sent to our spam traps.

Custom filtering incoming mail

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Custom filtering incoming mail If you want to filter incoming mail using custom rules there are a few ways of doing this, depending on your exact requirements. * Download rules - if your incoming mail is via POP3 collection, you want to filter on headers, size etc (not contents)

Error message after sending RCPTTO: - error 0 - text 550 5.7.1 Relaying not allowed! Bad sender IP address

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Error message after sending RCPTTO: - error 0 - text 550 5.7.1 Relaying not allowed! Bad sender IP address If you get this error message from within Webmail, then it usually means that the SMTP service access restrictions are blocking Webmail from sending mail.

Using IMAP4 with VPOP3 Enterprise

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Using IMAP4 with VPOP3 Enterprise VPOP3 Enterprise supports IMAP4 email clients (VPOP3 Basic does not). With IMAP4 the email folders and messages are stored on the mail server. The email client then synchronises with the server. Also, unlike with POP3, several things can access the same mailbox at once.

Sender Domain Must Resolve

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Sender Domain Must Resolve If you receive an 'SMTP Client Error' something like: 451 (user@domain.com) Sender Domain Must Resolve this means that the ISP's mail server cannot find the domain.com part of the email address. Often this means that the FROM address of the message is invalid, or that the

Using VPOP3 Advanced Features with LAN Forwarding

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Using VPOP3 Advanced Features with LAN Forwarding If you are wanting to use any of VPOP3's advanced features (such as mailing lists, message monitoring, wildcard aliases etc) because you are LAN forwarding to a less capable server, then you will usually need to have VPOP3 do all its normal message routing functions initially, then, as the final stage have it forward the messages on to the other server.

LAN Forwarding Queue Status

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

LAN Forwarding Queue Status To view the LAN Forwarding Queue Status, go to Settings -> Local Mail -> LAN Forwarding -> Queue Status The LAN Forwarding Queue shows the messages which VPOP3 has currently got queued to be sent to another mail server on your network using SMTP. The LAN Forwarding Queue status page shows a simple list of the messages waiting to be sent. The four columns in the table show:

ListServer Settings

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

ListServer Settings Settings -> ListServer Settings In VPOP3, the ListServer is an automated 'user' which handles mailing list requests, such as subscribe & unsubscribe commands. Anyone can send an email to the ListServer to subscribe to (public) mailing lists, or unsubscribe from mailing lists they are on, or see a list of public mailing lists etc.

POP3 Server -> General Tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

POP3 Server -> General Tab Services -> POP3 Server -> General tab This page sets the general settings for the POP3 service component in VPOP3. The POP3 service is how users collect their email from VPOP3 using a POP3 email client Service Name The Service Name is a name you give the service for your reference. It is only used in administrative displays and logging, so the name doesn't matter. Most people leave it at the default.

Route incoming POP3 mail by parsing message headers

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Route incoming POP3 mail by parsing message headers This routing method is generally used if you have a catch-all or 'multi-catch' mailbox with your Internet provider. With this method, VPOP3 will look at the To/Cc and other fields in the message headers to try to work out who the message is for. If the recipient is not listed in the headers (eg for BCCd mail) it may not be able to automatically detect who the message is for.

Autoresponder

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Autoresponder An autoresponder is a way of automatically replying to messages as they arrive in a user's mailbox. In VPOP3, an incoming message must arrive in a user's mailbox for the autoresponder to trigger. If you use forwards, assistants, mappings, etc to divert a message before it arrives in the mailbox, the autoresponder will never trigger. If you want to use an autoresponder, but not keep the original message, then make sure the message arrives in the mailbox (eg by using an 'Assistant'…

Webmail Status bar

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Webmail Status bar The Status bar within VPOP3 webmail displays important information at a glance. [VPOP3 version 5.0 Webmail Status bar] User - At the far left, is a display to let you know which user is currently logged in. Version - After the username, there is an indication of the current VPOP3 version.

GDPR for other hosting services (eg web hosting)

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

GDPR for other hosting services (eg web hosting) As a hosted service provider, we are classed as a “Data Processor” under the GDPR regulations. For our hosting services: * Data is held in the UK. Data is not transmitted outside of the EU except at your explicit request or command.

421 4.3.2 VPOP3 Too many connections from your IP address - try later

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

421 4.3.2 VPOP3 Too many connections from your IP address - try later If you see this error message when you are sending messages, then it means that VPOP3 has detected too many simultaneous connections from your IP address. This would usually happen if the sender is another mail server as they can make many simultaneous connections when there are lots of messages to send. The error code that VPOP3 gives means that the sender should try sending the messages later, so it should be possible to e…

Socket Error 10061 - The attempt to connect was forcefully rejected

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Socket Error 10061 - The attempt to connect was forcefully rejected Error 10061 means that the computer which VPOP3 was trying to connect to (probably at your ISP) refused the connection from the computer running VPOP3. There are several possibilities that can cause error 10061:

Download Rules

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Download Rules Download rules are applied to messages downloaded using a POP3 mail collector. To configure the rules, go to the VPOP3 settings, then Mail Connectors -> Mail Collectors -> POP3 General. There is an Edit Download Rules button which brings up the download rule editor. To tell this mail collector to use the download rules, ensure that the

Error Message Handling

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Error Message Handling VPOP3 will normally send an error message to the Main Administrator every time it encounters an error. We recommend you leave it like this in most cases - if an error message occurs repeatedly, then it usually means there's an underlying problem which needs resolving rather than ignoring.

Error Messages

Anonymous (anonymous@undisclosed.example.com) — 2025-10-06T15:21:37+00:00

Error Messages This is the place to look if you are trying to trouble shoot a problem and you have received or have access to a specific error message or error code. If instead your problem is that something you think is set up correctly is not working then the best place to look would be the

"Error Sending Message After Authentication" in Webmail

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

"Error Sending Message After Authentication" in Webmail If you get an error while sending a message using Webmail, such as “Error sending message after authentication - error 0 - text 502 Error: command not implemented” this means that you have another SMTP server running on the VPOP3 computer, and when the VPOP3 Webmail service tries to send the message it is sending it to this other SMTP server, rather than to the VPOP3 server. The Webmail service uses internal commands which the other SMTP…

General instructions for setting up an email client

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

General instructions for setting up an email client If your specific email client program is not listed, you can set up any other email client by using the following instructions: * In your email client create a new 'account' * For the incoming and outgoing server name/address use the

Internationalisation

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Internationalisation VPOP3 has two places where internationalisation can be carried out. In the VPOP3 directory on the server are some *.LNG files. These are language files for the WebMail interface. You can create a new language file by copying the ENGLISH.LNG to another file, eg FRANCAIS.LNG, and then use a text editor (eg Notepad) to edit the text strings in there (the text after the '=' on each line

How to configure Outlook 2007

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to configure Outlook 2007 Email SMTP Authentication To set up SMTP authentication in Outlook 2007, if your VPOP3 requires it, go to Tools -> Account Settings, select your email account and press Change.... Then, press the More Settings... button

How to configure Outlook 2010

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to configure Outlook 2010 In many ways, configuring Outlook 2010 is a similar to configuring Outlook 2007. The biggest difference you are likely to notice is the new “Ribbon” interface, in place of the traditional menu bar (File, Edit, View, etc.) Email

Outlook / Outlook Express is sending mail repeatedly

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Outlook / Outlook Express is sending mail repeatedly If you are using Outlook or Outlook Express you may occasionally find that mail is being sent repeatedly. There are a couple of possible reasons for this which we know of Sending taking too long

VPOP3 - POP3 Client Connection Problem

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

VPOP3 - POP3 Client Connection Problem These errors occur during the period when VPOP3 is trying to establish a connection to your ISP's POP3 mail server to receive incoming mail. They can mean that you have entered the POP3 Server address incorrectly, or that there is a problem with the network, or that your ISP's mail server is not working properly.

Problems sending messages to spam@

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Problems sending messages to spam@ If a VPOP3 user forwards a message to spam@, then the VPOP3 spam filter will train itself that that message was spam. If, when you forward the message, you get an error message like: Subject: Mail Delivery Failure Delivery Failure Report. The following message was incorrectly addressed. Recipient: "spam" is unrecognised.

Restricting the number of messages sent

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Restricting the number of messages sent Some ISPs set restrictions on the number of messages that you are allowed to send in a certain time period, eg 50 messages per hour, or the number of messages that you are allowed to send per connection. Restriction of messages per connection

Signing outgoing mail with DKIM

Anonymous (anonymous@undisclosed.example.com) — 2020-07-22T10:32:40+00:00

Signing outgoing mail with DKIM DKIM, also known as DomainKeys Identified Mail, is a form of email authentication that digitally signs emails to prove that they were sent from authorized domains and aren't fake emails. Companies like Google and Yahoo use DKIM to sign their emails and it is becoming ever more popular.

VPOP3 - SMTP Client Connection Problem

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

VPOP3 - SMTP Client Connection Problem These errors occur during the period when VPOP3 is trying to establish a connection to your ISP's SMTP mail server to send outgoing mail. They can mean that you have entered the SMTP Server address incorrectly, or that there is a problem with the network, or that your ISP's mail server is not working properly.

Training the VPOP3 Spam Filter

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Training the VPOP3 Spam Filter The VPOP3 spam filter has a couple of mechanisms which can be used to 'train' it to distinguish between spam and not-spam. Bayesian Filter The Bayesian filter this looks at words in messages sent and received and their probabilities of being contained in spam and not-spam, and works out an overall probability of the message being spam or not-spam based on the combination of those probabilities.

How to use the VPOP3 Status Monitor

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to use the VPOP3 Status Monitor The VPOP3 Status Monitor is a small program which displays a postbox icon (usually red) in the Windows notification area (usually at the bottom right of the screen - by the clock). This icon can be used for quick access to various VPOP3 facilities. Note that the Status Monitor is

VPOP3 2.x crashes when user tries to download mail

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

VPOP3 2.x crashes when user tries to download mail If VPOP3 2.x crashes when a user tries to download mail, there are a few possible causes we know of: * A virus scanner or Internet security software is interfering with the connection between VPOP3 and the email client and is either terminating VPOP3 deliberately, or is blocking VPOP3 causing another part of it to crash

Error message: Your connection has been blocked temporarily - Try again later

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Error message: Your connection has been blocked temporarily - Try again later If you get an error message in your email client software saying Your connection has been blocked temporarily - Try again later or Server access temporarily blocked! Please try again later

Delete list member from all lists

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Delete list member from all lists You can delete an email address from all VPOP3 distribution & mailing lists. Go to Settings → Database → Query Alternatively, at a command prompt in the VPOP3 directory run psql (The password is 'vpop3pass')

Download Rules

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Download Rules Download rules are a facility in VPOP3 where it can look at message summary information before downloading a message from an ISP POP3 mailbox (they do not work on incoming SMTP messages - use SMTP Rules for that) To edit download rules, go to

Message Monitoring

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Message Monitoring Message monitoring in VPOP3 will tell VPOP3 to send a copy of all the outgoing, internal and/or incoming mail from/to specified users to be sent to another specified user. In the current versions of VPOP3, all monitored messages are sent to the same user (or list), you cannot specify different recipients for different monitored users. (This may be something that is added/enhanced in the future)

Misc -> External Fax Tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Misc -> External Fax Tab Settings -> Misc Settings -> External Fax The External Fax tab is for use with some external fax server applications which work by collecting mail from a POP3 mailbox. If a Fax Server Mailbox is selected, then VPOP3 will automatically send any locally sent mail to that mailbox if the recipient is local, but doesn't match another local address (a user, list, mapping etc),

SMTP Server -> Spam Reduction

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTP Server -> Spam Reduction The Spam Reduction tab lets you configure various ways VPOP3 can reduce spam and email address spoofing Domainkeys “Domainkeys” is a way of signing a message to show that it comes from the person it claims to come from. The system is too complex to go into here, but it essentially takes key parts of the message header, as well as the message body and creates a PKI digital signature on it, using a 'private key' on your system. The receiving end will find the same…

Spamfilter Script Configuration tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spamfilter Script Configuration tab You reach this tab by going to Settings --> Spam Filter -> General, and then choose the General tab. The Spamfilter script has various settings that can be changed to alter the behaviour of the spamfilter. These are defined in the script, so may change with different versions of the script. The settings are currently:

Spamrules example - increase spam score if there are many links in the email

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spamrules example - increase spam score if there are many links in the email This script is for the case where you to increase the spamminess of emails where the email contains many links - in this case we'll say if the email contains 10 or more links. Note that we do not necessarily recommend that you do this as it is not a very good indicator of spam, and will probably catch a lot of newsletter type emails, but it is something we've been asked for, so here it is.

Status

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Status The VPOP3 Status screen has two tabs * Server Status * Sessions Server Status The Server Status tab is essentially a copy of the VPOP3 Status Monitor information. * Connection Status - this shows the 'online' status of VPOP3. If it says idle, it does not mean VPOP3 is not working, or not doing anything, it just means that it is not currently sending or collecting mail from the Internet.

Summary Log File Format

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Summary Log File Format VPOP3 creates a file called SUMMARY.LOG in the VPOP3 directory which contains summary information which is compiled daily into a daily summary reports sent to the administrator. VPOP3 can keep these summary logs in a subdirectory called

Message Rules

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Message Rules The Edit User -> Message Rules tab can be used to create/edit rules which are processed when messages arrive in a User's mailbox. They can be used to copy messages, mark them as read, delete them, etc VPOP3 will process Message Rules in the order they appear in the list. If you want to change the order of the rules, you can drag & drop them into the correct order. Usually when VPOP3 has processed a rule, it will go on to check further rules, but you can use the

Spamfilter White/Blacklists

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spamfilter White/Blacklists This lets you set whitelists & blacklists for the spam filter. There are four lists you can manage. The Whitelist Addresses & Blacklist Addresses lists let you specify sender email addresses to check. With the default rule weights, if a sender's address is on the Whitelist, it will be allowed through the spam filter, and if it is on the Blacklist it will be blocked. If an address is on both the Whitelist and the Blacklist, they will cancel each other out, and the me…

UserRuleActions Replacement

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

UserRuleActions Replacement Use: ~userruleactions~ ~end~ Required parameter: Account, RuleId This returns the message rule actions for the specified rule The format string can have the replacements * id - numeric ID of the action * type - action type

How can I place an order

Anonymous (anonymous@undisclosed.example.com) — 2018-12-05T15:24:44+00:00

How can I place an order Online The easiest way to place an order is online. Click on the Purchase item in our website navigation bar, and select the appropriate product. You will be presented with a price list. Choose the required item and click the

535 Authentication Failed

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

535 Authentication Failed This is an SMTP error meaning that an attempt to authenticate has failed. If this error is appearing when the email client is trying to log into VPOP3, then you can check the VPOP3 'SECURITY.LOG' file which may contain more information, such as an invalid password, unknown username, etc. (This information is not returned in the SMTP session because it would help an attacker).

Socket Error 11001 - Host not found (authoritative answer)

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Socket Error 11001 - Host not found (authoritative answer) This means that the ISP POP3 or SMTP server which you have told VPOP3 to connect to does not currently exist. This might be that you have mistyped the server address, or that your ISP is having temporary problems, or that you are using an internal

VPOP3 Webmail/admin service and/or Status service is not listening on correct IP addresses or ports

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

VPOP3 Webmail/admin service and/or Status service is not listening on correct IP addresses or ports Sometimes, VPOP3 can be configured so that the Webmail/admin service, or Status service is not listening on the correct IP addresses or ports. This can be hard to fix through normal methods, since you may not be able to get into the settings to change the settings.

Calendars

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Calendars To use the calendar facility in VPOP3 you need a CalDAV aware client. We have tested it with the free Mozilla Sunbird & Lightning products as well as the emClient email client. These products need a URL to be able to access the CalDAV data store. Once you have the URL (see below), copy it into the

Changing a user's password

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Changing a user's password To change a user's password in VPOP3, you should log into the VPOP3 settings, go to the 'Users' page, then double-click on the user whose password you want to change. This will bring up a window giving you access to the user's settings. Go to the 'Passwords' tab where you can set the passwords.

Creating Extra SMTP Services

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Creating Extra SMTP Services In VPOP3 Enterprise (not VPOP3 Basic) you can create multiple SMTP services. This can be useful if you want VPOP3 to listen on different ports and/or have different settings. There are two ways of doing this. Have a single SMTP service listening on multiple ports or IP addresses

How to delete a Mail Collector or Connection

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to delete a Mail Collector or Connection To delete a Mail Collector or Connection in version 3, click on the little waste-bin icon at the left of the green bar on the Mail Collector or Connection settings page. We have made this more obvious in version 4, by including a bigger

-ERR Mailbox Locked error

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

-ERR Mailbox Locked error If your email client displays an '-ERR Mailbox Locked' or '-ERR [IN-USE] Mailbox Locked' error when trying to log into VPOP3 it means that the mailbox is locked. The POP3 standard requires that POP3 mailboxes have an 'exclusive lock' on them when they are in use. This means that only one POP3 client can access the mailbox at once. Also, if a POP3 mailbox is currently accessing a mailbox, then no IMAP4, Webmail or administrator access is allowed to the mailbox at the s…

Error expanding recipient - Nesting Level too deep

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Error expanding recipient - Nesting Level too deep You receive an error message saying: Error expanding recipient "" Nesting Level too deep (51) Check the configuration for loops (Note the '51' number may be slightly different - that's the nesting level - anything over 50 is detected as an error)

IMAP4 'Ghost Folders'

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

IMAP4 'Ghost Folders' Sometimes your IMAP4 email client may show folders in the folder tree, but when you select them, you get an error that the folder does not exist. This happens because IMAP4 has the concept of being able to 'subscribe' to folders - this means that you can hide folders by unsubscribing from them.

Configuring iCal on Mac OSX to connect to VPOP3's CalDAV service

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Configuring iCal on Mac OSX to connect to VPOP3's CalDAV service This requires VPOP3 v6 or later. The following instructions are for Mac OS X v10.7.5 but should work with similar versions. We have not been able to create an account by going to System Preferences

Installation checklist

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Installation checklist This list contains some things you may want to check before or after installing VPOP3 to make sure it's not going to encounter any common issues. Before installation * Make sure that VPOP3 is not installed on a RAID 5 or RAID 6 array.

Installation conficts

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Installation conficts During installation, the installer program does some basic checks for conflicting software. This is software which is providing the same services as the VPOP3 software - i.e. SMTP, POP3 and/or LDAP services. For POP3/SMTP it will show the text which the conflicting software announces itself as.

Is it possible to stop messages that VPOP3 downloads from being marked as read?

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Is it possible to stop messages that VPOP3 downloads from being marked as read? VPOP3 does not mark messages as read when it downloads them. In fact, the POP3 protocol doesn't have a system available for marking messages as read, so it is impossible for VPOP3 to mark messages as read.

The ISP needs SMTP Authentication

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

The ISP needs SMTP Authentication If your ISP needs you to use SMTP authentication when sending mail to them, then you just need to tell VPOP3 to use authentication when sending. Click the Mail Connectors button at the top of the page, then click on the relevant

ISP needs you to connect on port 587

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

ISP needs you to connect on port 587 Some ISPs will need you to send mail using port 587, instead of port 25. Port 587 is the 'SMTP Submission' port which is commonly used instead of, or as well as, the standard SMTP port 25 for when users are sending mail to a smart host/relay server.

Trying to perform administrative tasks without rights

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Trying to perform administrative tasks without rights This problem can have two symptoms: * When trying to access the VPOP3 settings you get an error “You are trying to perform an VPOP3 administration task while logged in as a non-administrator

Obtaining Windows Event Log

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Obtaining Windows Event Log Sometimes, the VPOP3 technical support team may need to see entries from the Windows Event log, especially those relating to VPOP3 or the PostgreSQL service. If there are too many entries simply to copy, you can save them to a file to email to technical support.

Outbound Messages Not Appearing in Monitor Target Mailbox

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Outbound Messages Not Appearing in Monitor Target Mailbox For VPOP3 to monitor outbound messages it needs to be able to work out that the message is FROM: a user whose mail should be monitored. To do this it has to examine the FROM: address in the message header.

How to configure Outlook 2003

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to configure Outlook 2003 Email (to be completed) Address Book To configure Outlook to use the VPOP3 global address book, go to Tools -> E-Mail Accounts in Outlook Then choose Add a new directory or address book and press Next Choose Internet Directory Service (LDAP)

POP3/Webmail/IMAP4 can't see a user's messages, but the administrator can

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

POP3/Webmail/IMAP4 can't see a user's messages, but the administrator can Version 2.x only. This problem does not occur with version 3 or later. This problem can happen if the user's message index database has become damaged. The POP3, Webmail & IMAP4 services get the message summary data from the database, whereas the administrator console gets the message information directly from the message files on the disk, so if the database is corrupted, the administrator console can still see the mess…

PostgreSQL Replication

Anonymous (anonymous@undisclosed.example.com) — 2019-02-06T17:10:31+00:00

PostgreSQL Replication PostgreSQL 9.1 (used in VPOP3 5 and later) supports replication from a 'Master' to a 'Slave' database server. This can be used with VPOP3 for having a near-realtime backup of your settings & messages. To use the replication, you need to have a file share which is accessible from both PCs. The thing to watch out for is that the PostgreSQL services may be running as a different user from the currently logged in user, so make sure that the user(s) which the PostgreSQL servi…

Problems sending mail via BT from your own domain

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Problems sending mail via BT from your own domain BT Internet only allow you to send mail through their mail servers from your BT Internet address or other registered address. Attempts to send from other addresses will give you a 553 SMTP error message.

Spam Quarantine

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spam Quarantine By default, when the VPOP3 spam filter detects a message as being spam, it will go to the user's quarantine. Users can release messages from the quarantine by going to their webmail page and selecting the message from the quarantine list there.

SMTP Rule Example - restrict who can send to a local email address

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTP Rule Example - restrict who can send to a local email address If you have a local email address (a user, group or distribution list) and you want to restrict which email addresses can send messages to this address, you can use SMTP rules. There are a few ways you can configure the SMTP rules for this scenario.

SMTP Rules

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTP Rules Download rules are applied to messages which arrive at VPOP3 using SMTP - either locally sent messages, or incoming messages received through an SMTP mail feed. To configure the rules, go to the VPOP3 settings, then Services -> SMTP Service

Spam filter not working

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spam filter not working If the VPOP3 spam filter appears not to be working at all, the first thing to do is to look at the message headers of an incoming message to see if the spam filter is being run at all. Check to see if a header line beginning with X-VPOP3-Spam

Troubleshooting Tips

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Troubleshooting Tips Telnet One of the most basic, and useful, tools for troubleshooting email systems is a Telnet client. Installing Telnet Client Unfortunately, since Windows XP, Microsoft do not install the Telnet client into Windows by default, so you may need to install the Telnet client yourself.

Unable to access Webmail/Admin when using Kaspersky Antivirus/Internet Security

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Unable to access Webmail/Admin when using Kaspersky Antivirus/Internet Security If you are unable to access Webmail/Admin when using Kaspersky Antivirus/Internet Security, it may be Kaspersky which is blocking the site. One user has reported that you can solve this by the following steps: - Go to the Kaspersky Web Anti-virus Section - Add the server

UserRuleActions Replacement

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

UserRuleActions Replacement Use: ~userruleactions~ ~end~ Required parameter: RuleId This returns the message rule actions for the specified rule The format string can have the replacements * id - numeric ID of the action * type - action type

Version 5 Web Mail API

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Version 5 Web Mail API This section is only relevant for people who may want to access the WebMail features from their own scripts, or want to customise the standard Webmail pages. Note that no free support is available for this. This is not a full list of features, but it will be updated from time to time.

About

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

About The VPOP3 'About' page lets you see the version and build number of your VPOP3 installation, along with any licence details, and supplier details (if any) Licence Information The Licence Information section shows your current licence information

Settings -> Attachment Processing

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Settings -> Attachment Processing The Attachment Processing page allows you to configure VPOP3 to perform two distinct functions on messages that contain attachments: * * Filtering The Filtering tab is divided into four main sections: Attachment Filtering

Autoresponder scripting

Anonymous (anonymous@undisclosed.example.com) — 2025-05-28T09:24:38+00:00

Autoresponder scripting For scripting to alter the whole autoresponder definition and set in the VPOP3 settings rather than embedded in an autoresponder itself, see Autoresponder Global Scripting In an autoresponder, you can create a Lua script by surrounding it with & tags, eg

DMARC Reporter Script

Anonymous (anonymous@undisclosed.example.com) — 2023-11-12T09:51:40+00:00

DMARC Reporter Script (from VPOP3 v8.6 onwards) This script lets you customise how VPOP3 sends DMARC reports to the sending domain. This can be useful in case the sending domain's DMARC configuration is incorrect as that can cause errors sending the reports or cause messages to be 'stuck' in VPOP3's Outqueue. These problems won't cause any lasting damage, but may be inconvenient or annoying, so you can alter the behaviour using Lua scripting

Global Signature

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Global Signature You can set a Global Signature in VPOP3 by going to Settings -> Global Signature The Global Signature option lets you tell VPOP3 to add a standard piece of text or HTML to the bottom of all outgoing messages. You can create just a plain text, or

IMAP4 -> Advanced tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

IMAP4 -> Advanced tab This page is reached from Services -> IMAP4 Server, then the Advanced tab. Here are some advanced options for the IMAP4 service in VPOP3 Fake access to inaccessible mailboxes In the IMAP4 service you may have folders which do not exist. For instance, if you are accessing a shared Inbox folder from a user called 'Karen', then their folder will be called

Logging

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Logging Activity Summary Reports You can tell VPOP3 to send you a daily summary report each day. To do this check the box to say Send daily summary logs to, and choose the appropriate user (or “Main Administrator” if you want the reports to be sent to the

Monitor Scripting

Anonymous (anonymous@undisclosed.example.com) — 2019-08-27T16:13:40+00:00

Monitor Scripting (Added in V6.15) This script has three functions: * MonitorIncoming * MonitorInternal * MonitorOut The functions are similar, except they are called when different messages are to be monitored (incoming, internal and outgoing messages respectively).

Outgoing Message Scripting

Anonymous (anonymous@undisclosed.example.com) — 2024-03-21T10:49:54+00:00

Outgoing Message Scripting Every time VPOP3 adds a message to the Outgoing mail queue, it runs a script called outmessage.lua. Scripts are stored as files in the VPOP3 directory in VPOP3 v6.6 and earlier, or managed through the Settings -> Scripts page in VPOP3 v6.7 and later.

VPOP3 Reference

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

VPOP3 Reference This is a reference guide for VPOP3 version 3 or later's settings. For details on how to do things, rather than what a particular button does, see the how to section. Also see the online manual: * Users * Lists * Mappings * Mail Connectors * Services * Settings * Status * Reports * About * Status Monitor *

Settings

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Settings * Admin Settings * Anti-virus * Attachment Processing * Autoresponder Settings * Database * Diagnostics * FaxServer * Global Address Book * Global Signature * Groups * Header Processing * Receipts/Urgent Messages * Global Header Modifiers * Legacy Extensions * Listserver Settings * Local Mail * General * Domain Mappings * LAN Forwarding * Configuration * Queue Status * Logging * Message Archive * Message Monitoring * Misc Se…

Signature Script

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Signature Script If you want more complex signatures on outgoing emails, rather than the static text/HTML you can define within VPOP3, then you can use a simple Lua script to define the signature. The Lua script is stored in a file called signature.lua

SMTP Service - Filtering

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTP Service - Filtering The SMTP Server -> Filtering tab lets you set up filtering of messages going through the VPOP3 SMTP service. This may be incoming SMTP messages, or locally sent messages. SMTP Rules SMTP Rules let you create custom rules for processing messages as they go through the VPOP3 SMTP service.

SMTP Server -> IDS/IPS

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTP Server -> IDS/IPS The IDS/IPS tab lets you set logging and automatic blocking parameters for the IDS (Intrusion Detection System) and IPS (Intrusion Prevention System) component of the SMTP server. SMTP servers are regularly attacked, both by incoming mail attacks (spam/viruses etc) and relay attacks (by spammers and other malware distributors trying to send mail through them). Because of this, there is a system in VPOP3 which will track attack attempts on the SMTP service and can automat…

Spamrules example - increase spam score for long sender domain

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spamrules example - increase spam score for long sender domain This script is for the case where you to increase the spamminess of emails where the sender's email address contains a long domain. In this case we'll say if the sender's domain has 20 or more characters in the first section (between the @ and first .). Note that we do not necessarily recommend that you do this as it is not a very good indicator of spam, but it is something we've been asked for, so here it is.

User Delivery Script

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

User Delivery Script (VPOP3 v6.5 or later) If there is a /delivery.lua script, this Lua script can override VPOP3's message delivery options. You can edit this in the Settings -> Scripts page in the settings. This script affects how VPOP3 will handle how messages being delivered to this user are handled.

Users

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Users The Users page shows the list of users, as well as giving you some actions which you can perform use the user list. * Import users from file * Import users from Windows * Export users to file * Bulk Add Users * Edit User Welcome Message * Send Admin Message * Edit a User User List Outgoing Messages Just above the main user list is an entry Outgoing Message Queue. Clicking on this will let you see which messages are waiting to be sent out, and you can delete/

VPOP3.GetMessages Lua function

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

VPOP3.GetMessages Lua function The Lua management function 'VPOP3.GetMessages' retrieves a table containing all the mail messages in a specified folder. VPOP3.GetFolders(username, folder); * username is the username from VPOP3.GetUsers * folder is the folder from VPOP3.GetFolders It returns a table where the key is the message UID and the value is a table of:

VPOP3.SendMessage

Anonymous (anonymous@undisclosed.example.com) — 2021-08-09T10:58:46+00:00

VPOP3.SendMessage The Lua function 'VPOP3.SendMessage' sends a text email message It takes four parameters: * The email address of the sender * The email address of the recipient * The subject line * The message body The function returns one value:

Formatting Syntax

Anonymous (anonymous@undisclosed.example.com) — 2026-03-16T16:00:10+00:00

Formatting Syntax DokuWiki supports some simple markup language, which tries to make the datafiles to be as readable as possible. This page contains all possible syntax you may use when editing the pages. Simply have a look at the source of this page by pressing

Frequently Asked Questions

Anonymous (anonymous@undisclosed.example.com) — 2026-03-18T20:51:33+00:00

Frequently Asked Questions Pre-Sales Questions * What is the difference between VPOP3 Basic/Standard and VPOP3 Enterprise? * Do I have to pay VAT? * Will I receive a VAT invoice? * What are the limitations of the Home User licence Sales Questions * How can I place an order? * Can I add two licences together? * I got a copy of VPOP3 via Trialpay and would like a refund General * How do I get support? * VPOP3 Roadmap * What do I do if I have lost my VPOP3 licence details?…

How do I login to the PSCS website?

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How do I login to the PSCS website? You can access your licence details and invoices on the www.pscs.co.uk website. To log into the website click the Login button at the top right of the website. You will log in using the email address you specified linked to your account (usually the email address you used when placing your order) and your password. The password is initially randomly generated and emailed to you with your invoice(s). If you have not received the password, or have forgotten i…

What is Software Maintenance?

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

What is Software Maintenance? VPOP3 Software Maintenance includes basic email support (target turnaround within 3 days) as well as version upgrades (eg 6.19 to 6.20) free of charge when they are released during the period of validity of your Software Maintenance.

What is Software Maintenance?

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

What is Software Maintenance? VPOP3 Software Maintenance includes basic email support (target turnaround within 3 days) as well as version upgrades (eg 4.x to 5.x) free of charge when they are released during the period of validity of your Software Maintenance.

Socket Error 10048 - Specified Address Already in Use

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Socket Error 10048 - Specified Address Already in Use This error only normally occurs during VPOP3 startup. It occurs if some other software running on the same machine as VPOP3 is using one of the ports that VPOP3 is already using. This could be a proxy like WinGate, WinProxy or anti-virus software that acts as a proxy, an LDAP server (e.g. Active Directory) or another mail server program (e.g. Exchange Server). The latter two causes are particularly common on

Socket Error 10053 - An established connection was aborted by the software in your host machine.

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Socket Error 10053 - An established connection was aborted by the software in your host machine. Error 10053 means that an established connection has been dropped. There are three descriptions of this error message we know about, but the descriptions are given by Windows, so they may vary depending on your version of Windows:

Autoresponders / Out of Office

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Autoresponders / Out of Office VPOP3 has an autoresponder facility for sending automatic replies when a message arrives in a mailbox. This is often used for 'Out of Office' replies, but it is not limited to that use. To set an autoresponder, the administrator can edit the user and go to the

Configuring Calendar on iOS

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Configuring Calendar on iOS These instructions are for configuring a new Calendar account on iOS for iPhone, iPad and iPod Touch. The version of iOS used for these instructions is iOS v6.0, but they will probably work or help with other versions of iOS.

Configure SRS

Anonymous (anonymous@undisclosed.example.com) — 2025-08-18T15:28:11+00:00

Configure SRS In VPOP3 8.8 and later, you can use Lua scripting to implement 'SRS' (Sender Rewriting Scheme') in VPOP3 This involves adding a couple of functions to rewrite outgoing return paths in 'relayout.lua' or 'mxout.lua' as appropriate and a couple of functions to redirect rewritten bounce message recipients in 'smtpsvr.lua'

Daily Summary is not reporting all Sent messages

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Daily Summary is not reporting all Sent messages For VPOP3 to log outbound messages it needs to be able to work out that the message is FROM: a user whose mail is handled by the local VPOP3. To do this it has to examine the FROM: address in the message header.

SMTP error 'Invalid HELO name'

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTP error 'Invalid HELO name' When sending mail you may get an error from the remote SMTP server saying something like 'Invalid HELO name' This happens if the host name configured in VPOP3 does not look like a valid Internet host name (e.g. 'mail.domain.com'). Some SMTP servers don't bother checking this value because it has no authentication value at all, but a few do check that it looks correct.

Make VPOP3 retry outgoing messages immediately

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Make VPOP3 retry outgoing messages immediately If VPOP3 has a temporary problem sending a message it will retry it later. When it will retry it depends on how many times it has already tried to send it, and is based on the 'Sender Retry' setting in the Mail Connectors

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

The ping command is a useful way of diagnosing network problems. It's similar to the sonar ping in a submarine. It sends out a signal to a specified machine and waits for a response to be echoed back. * Open a command prompt * Type ping www.pscs.co.uk. You should see a display like this:

Restore selected mail folders or mailbox in VPOP3 v5 or later

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Restore selected mail folders or mailbox in VPOP3 v5 or later (This option is only available in VPOP3 Enterprise) First - if the problem is that messages were deleted very recently (the default is within 3 days), you can probably use the Undelete feature in VPOP3.

Restore a single user's mailbox or folder in v3 or v4

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Restore a single user's mailbox or folder in v3 or v4 To restore a single user's Mailbox or folder is currently only possible in VPOP3 Enterprise, and requires a second PC to act as a temporary VPOP3 server. You need to: * Restore your latest VPOP3 backup to another PC (a temporary VPOP3 server)

Timeout problems downloading/uploading messages with attachments

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Timeout problems downloading/uploading messages with attachments There are various possible reasons for this, usually to do with third party internet security software but they may also be associated with Windows TCP/IP or dial-up adapter issues. You may not have problems with other software, but that doesn't mean the problem is being caused by VPOP3.

"Too many logins" error message

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

"Too many logins" error message VPOP3 version 4 and later have a limit on the number of concurrent logins which can be received for a single user or from a single IP address. This is to prevent a single user from bringing the server down. The current default limits are 20 per user, or 1000 per IP address (to allow multiple people sharing a NAT IP address)

How To Upgrade VPOP3

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How To Upgrade VPOP3 Note: if you are upgrading to VPOP3 version 5 or later from version 4 or earlier, please see How To Upgrade VPOP3 to version 5 Upgrading VPOP3 is a straightforward process. Download VPOP3 from our web site and ideally back up your current installation just in case something goes wrong. Then simply run the installer that you downloaded and install it over the top of your existing VPOP3. All your settings and mail will be preserved.

How To Move VPOP3 Version 2 to a New Folder/Drive on the same PC

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How To Move VPOP3 Version 2 to a New Folder/Drive on the same PC (Also applies to version 1.x) To move VPOP3 to a new folder or drive on the same PC you should go through the following steps: * Copy the VPOP3 directory and subdirectories from the old folder to the new folder.

How To Move VPOP3 Version 2 to a New PC

Anonymous (anonymous@undisclosed.example.com) — 2019-11-12T16:06:44+00:00

How To Move VPOP3 Version 2 to a New PC (Also applies to version 1.x) To move VPOP3 to a new PC you should go through the following steps: * Copy the VPOP3 files * Copy the VPOP3 directory and subdirectories from the old PC to the new PC. (If you are moving to Windows Vista/2008/7/2012/8 or later, do NOT copy the files to a 'Program Files' folder on the new PC. Recent versions of Windows have special protection for those folders, which is not compatible with VPOP3)

v3/4 - Move the message store to a new folder/drive

Anonymous (anonymous@undisclosed.example.com) — 2018-12-05T15:25:24+00:00

v3/4 - Move the message store to a new folder/drive This guide assumes you want to just move the VPOP3 message store/database to a new folder on the same PC, and leave the VPOP3 installation directory where it is. * Stop VPOP3 * Stop PostgreSQL

Move VPOP3 Version 3 or 4 to a new PC

Anonymous (anonymous@undisclosed.example.com) — 2019-11-12T16:09:08+00:00

Move VPOP3 Version 3 or 4 to a new PC Moving VPOP3 Version 3 or 4 to a new PC is slightly different from moving earlier versions, because of the database system. The summary of steps is: * Stop VPOP3 on the original PC * Manually make a backup of the database on the original PC

v5 - Move the message store to a new folder/drive

Anonymous (anonymous@undisclosed.example.com) — 2019-11-12T16:10:42+00:00

v5 - Move the message store to a new folder/drive Here is an alternative method, which may be simpler, but only moves the data, not the whole database store (which is a subtle difference) This guide assumes you want to just move the VPOP3 message store/database to a new folder on the same PC, and leave the VPOP3 installation directory where it is.

Error message: VPOP3 Alert - Non-existent user -

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Error message: VPOP3 Alert - Non-existent user - If you receive an error message like: Subject: VPOP3 Alert - Non-existent user - Delivery Failure Report. There was incoming mail for non-existent user "". This means that VPOP3 downloaded a message using POP3 and it was addressed to an email address which does not exist.

VPOP3 re-downloading old messages from the ISP POP3 server

Anonymous (anonymous@undisclosed.example.com) — 2026-01-05T09:31:47+00:00

VPOP3 re-downloading old messages from the ISP POP3 server If you tell VPOP3's POP3 mail collector to leave messages on the ISP's server for a few days, you may find that sometimes VPOP3 will redownload all the messages from the ISP mailbox again.

When sending mail, VPOP3 adds 'PRVS=...' to the sender address

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

When sending mail, VPOP3 adds 'PRVS=...' to the sender address This is because VPOP3 version 5 and later support BATV. BATV helps to eliminate 'backscatter spam', where someone else sends spam pretending to be from you, and then you receive all the bounce messages from those messages. BATV encodes the sender address in a special way so that VPOP3 can detect that a bounce message is in response to a message that you actually sent.

AutoresponderInfo Replacement

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

AutoresponderInfo Replacement Use: ~autoresponderinfo~ Required parameter: responderid - the ID of the autoresponder This returns a JSON structure containing the details of the specified autoresponder. The return structure is an object containing:

Autoresponder Commands

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Autoresponder Commands This article only applies to VPOP3 v4 and earlier A VPOP3 autoresponder can contain special text strings to create special behaviour, in addition to plain text as part of the response. There are three types of 'command' *

Database -> Restore Tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Database -> Restore Tab This tab is only in VPOP3 Enterprise (v5 and later), and is for performing a partial (mailbox/mail folder) restore of the database. To do a full restore of the database, or for VPOP3 Basic/Standard, see the “Restore a Backup of VPOP3” topic Using the

Edit a user

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Edit a user To edit a user, go to the Users list in the VPOP3 settings and double-click on the username. * General * Passwords * Routing * WebMail Settings * Autoresponder * Message Rules * Permissions * Quotas * Aliases * Address Book * Signature * Advanced * Media * Finger Info

Settings -> Global Address Book

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Settings -> Global Address Book The VPOP3 global address book allows users to access a shared address book from any email client which supports the 'LDAP' protocol (most modern email clients do, but they may call it 'directory service' Importing Entries

LAN Forwarding

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

LAN Forwarding LAN Forwarding is a feature of VPOP3 where it can send messages to another mail server using SMTP. This other mail server is usually on your local network (LAN), hence the name, but it can actually be anywhere that has a permanent network connection to VPOP3. VPOP3 will send messages using

POP3 Client Lua Scripting

Anonymous (anonymous@undisclosed.example.com) — 2023-08-16T07:48:01+00:00

POP3 Client Lua Scripting The POP3 Client Lua Script is called POP3CLT.LUA and is edited in Settings -> Scripts. This script is called whenever VPOP3 runs a POP3 session to download messages from a remote POP3 server. VPOP3 will call the following Lua functions in the script at the following times:

Message Headers

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Message Headers This article describes some of the headers which VPOP3 can add to messages. Note that some of these may be added by customisable scripts used by VPOP3, so may not match exactly, but the descriptions below are for the defaults distributed with VPOP3.

POP3 Server

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

POP3 Server This page lets you configure the POP3 server component of VPOP3. This is how users collect mail from VPOP3 using a POP3 email client. In VPOP3 Enterprise, you can create multiple POP3 servers with different settings for instance, to allow SSL connections for local users using the older

Send Admin Message

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Send Admin Message It is possible for administrator users to send a bulk email message to an entire group or list. To begin composing an email, go to the Administration Settings -> Users page, and click Send Admin Message. This should then open a window, which allows you to specify various options.

Services

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Services This page lets you see and manage the services which VPOP3 provides for other programs, such as email clients. These are how users communicate with VPOP3. * General * POP3 Server * SMTP Server * IMAP4 Server (VPOP3 Enterprise Only) * Password Server * Finger Server * LDAP Server * WebMail Server * Status Server * NNTP Server

Lua SMTP Rules Scripts

Anonymous (anonymous@undisclosed.example.com) — 2026-03-26T11:41:59+00:00

Lua SMTP Rules Scripts When VPOP3 is processing SMTP Rules for messages received by SMTP, it runs a script called smtprules_(x).lua, where (x) is replaced by the numeric ID of the SMTP service VPOP3 processes SMTP Rules at least three times for each message - once when MAIL FROM has been received, once for each RCPT TO, and once when the whole message data has been received.

SMTP Service -> VRFY/EXPN Tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTP Service -> VRFY/EXPN Tab Services -> SMTP Server -> VRFY/EXPN Tab VRFY and EXPN are SMTP commands which allow another computer to verify email addresses without sending mail to them. See RFC 5321 for technical details. Usually, these commands should be disabled for security purposes, but some other software may be able to use these commands for various reasons. In this case, you can enable them, but restrict access to the IP address(es) you trust.

Increase the spam score for certain recipients

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Increase the spam score for certain recipients This script is for the case where you want certain recipients to have a weighted score. For instance if you have users who have left and who mostly receive spam, but you don't want to reject their mail totally.

Spam Filter Rules: AddNullAddress

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spam Filter Rules: AddNullAddress Statement AddNullAddress Version 2.2.1+ Purpose Temporarily adds an email address to VPOP3's configuration where the mail will be discarded AddNullAddress is intended for use to make 'pseudo' addresses, such as 'spam@' and 'notspam@' for the spam filter to process.

Spam Filter Rules: Reject

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spam Filter Rules: Reject Statement Reject Version 2.4.5+ Purpose Perform an SMTP 'Reject' on the incoming message The Reject statement requires an error code/text string, in the format Reject This will reject the current SMTP message with the specified SMTP result code. Use a 4xx error code (eg 450) to reject the message temporarily, or a 5xx error code (eg 550) to reject the message permanently.

User Manager Script

Anonymous (anonymous@undisclosed.example.com) — 2024-04-22T08:37:38+00:00

User Manager Script If you want people to be able to log in using a different username than their VPOP3 username (eg if you want them to be able to log in using an email address), then you can use the UserManager Lua script The Lua script is managed through the Settings → Scripts page in VPOP3 v8.0 and later and is called 'UserManager.LUA.

User Routing Options

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

User Routing Options Assistant The assistant for a user is an email address (or set of email addresses, separated by semicolons) where incoming messages to this user will be copied or redirected. Normally messages will be copied to the assistant, but if the

VPOP3 Wiki

Anonymous (anonymous@undisclosed.example.com) — 2022-10-01T11:36:44+00:00

VPOP3 Wiki Welcome to the VPOP3 Wiki. Here you will find VPOP3 documentation, FAQs and “How To” articles * FAQs * How Tos / Troubleshooting * Reference * Tips & Tricks If you want to add information, hints & tips, etc, you can register on this Wiki and modify or create new pages. Please don't ask questions on the Wiki; if you have a question, ask it on

OutMsgRecipients Replacement

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

OutMsgRecipients Replacement Use: [~outmsgrecipients~] Required parameter: MsgID This returns a JSON array containing details on the recipients for the specified message in the VPOP3 out queue. There is one object returned per recipient, and the object is:

UserQueueMessage Replacement

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

UserQueueMessage Replacement Use: ~userqueuemessage~ Required parameter: Account, Msgid Optional parameter: Folder ('Inbox' is used if not specified) You can also use the : modifier to set the maximum size of the response. If none is specified then a maximum size of 1000 characters is used. (e.g. use **~userqueuemessage:10000~)

Hosted Exchange Service

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Hosted Exchange Service We can provide a Hosted Exchange Service if you requirements mean that you need to have an Exchange Server. For most users, a hosted Exchange server is more complicated, more expensive and more limiting that having your own VPOP3 server or a dedicated hosted VPOP3 server, but some people require features that only Exchange can provide, such as shared calendars where the company policy restricts you to using Microsoft Outlook as the email client.

How can I download old versions of VPOP3?

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How can I download old versions of VPOP3? You can download old versions of VPOP3 by going to the VPOP3 downloads page on our website and clicking on the “download previous versions” link near the top of the page Note that old versions of VPOP3 may no longer be supported under our free email support

Which Ports does VPOP3 use?

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Which Ports does VPOP3 use? If you want to use VPOP3 through a firewall, you will need to open up some TCP ports in the firewall. VPOP3 uses several ports, for the different services it provides. The best way to see the ports it uses is to go to Services

Will I receive a VAT invoice?

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Will I receive a VAT invoice? We always send out VAT invoices for all purchases. These are sent as PDF files by email within a few days after your purchase. You can also access the invoices on our website, by logging into our website using your login details. vat invoice

552 5.2.3 Message too large - contact your administrator

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

552 5.2.3 Message too large - contact your administrator Or 552 5.2.3 Message exceeds fixed maximum message size If this error message is coming from VPOP3 when you are sending a message, it means that the message you are sending is prohibited by your VPOP3 settings. There are two places where the size limit could be set.

Socket Error 10060 - Operation Timed Out

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Socket Error 10060 - Operation Timed Out This error is quite self explanatory. It means that Windows reported that a connection attempt or idle connection timed out. If this error occurs during a connection attempt (eg in a VPOP3 - SMTP Client connection problem error message), then it means that Windows couldn't connect to the ISP mail server within a fixed time (the timeout limit is fixed within Windows itself). This problem can either mean that your ISP is having a problem, that you are con…

Socket Error 11002 - Host not found (Non-Authoritative answer)

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Socket Error 11002 - Host not found (Non-Authoritative answer) This means that VPOP3 is not getting a response from a DNS server when it is trying to look up the name of the ISP's mail server(s). Usually this means that Windows either does not know the address of a valid

Attachments have been removed or renamed

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Attachments have been removed or renamed If you have received an email and one or more of its attachments have been removed or renamed, it might be a result of Attachment Filtering. You can inspect the filtering rules by going to Administration Settings -> Settings ->

Anonymous (anonymous@undisclosed.example.com) — 2026-03-26T13:20:22+00:00

Calendars in Mozilla Thunderbird

Anonymous (anonymous@undisclosed.example.com) — 2022-01-26T10:47:35+00:00

Calendars in Mozilla Thunderbird The Thunderbird email client supports CalDAV calendars as standard. This can be used to access VPOP3's CalDAV server. To add a VPOP3 CalDAV calendar to Mozilla Thunderbirdis straightforward * Add the calendar to Thunderbird

Calendars on eM Client

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Calendars on eM Client If you have used CalDAV calendars on Mozilla Lightning/Sunbird, then the eM Client configuration is quite different, but simple. To add a CalDAV account to eM Client * Go to Tools -> Accounts * Click New Account... * Open the

Controlling VPOP3 via Email

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Controlling VPOP3 via Email You can control certain aspects of VPOP3 by sending emails to 'mailer_daemon@' The subject line must be one of the lines below: * Set Assistant * Query Assistant * Password * Set Forwarding * Query Forwarding

How to download VPOP3

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to download VPOP3 To download VPOP3 go to www.pscs.co.uk and click on Download/Try underneath VPOP3 Email Server (1) If you are wanting to download a previous version of VPOP3, click on the download previous versions link (2) Full Downloads If you are wanting to download the current version of VPOP3, click on the appropriate link (3).

How to configure Encore 32 Estate Agent Software

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to configure Encore 32 Estate Agent Software * Close down the Encore software * Open up the “Maintenance 32” program * Click on “Email Configuration” * Enter the IP address of the VPOP3 computer into the “SMTP Server address”

-ERR Password supplied for "xx" is incorrect

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

-ERR Password supplied for "xx" is incorrect If you receive a 'POP3 Client Error' something like: -ERR Password supplied for “xx” is incorrect this means that the password on the 'In Mail' tab in VPOP3 for the indicated user is entered incorrectly.

Error 0x80040201 when sending mail in Outlook

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Error 0x80040201 when sending mail in Outlook Often this is because there is 'Read Receipt' stuck in the Outlook out queue, but these do not show in the Outlook Outbox view. We found this article helpful: If you need help with following this, you can call us, but it

How to filter attachments

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to filter attachments VPOP3 can filter attachments in several ways. The most general is to use the Settings -> Attachment Processing -> Filtering tab as described below. VPOP3 can also filter attachments using the content/spam filter, or by using an integrated virus scanner.

How to 'share' domains between Exchange and VPOP3

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to 'share' domains between Exchange and VPOP3 If you want to have a VPOP3 server and Exchange Server using the same email domain, then you need to ensure that Exchange does not think it is 'authoritative' for the domain in question. See for details of how to do this in Exchange 2000 and 2003 (a similar process may be used in later versions of Exchange - contact your Microsoft Support technician if you need more help).

We installed a new router and now nothing works

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

We installed a new router and now nothing works If you installed a new router on your network and left it at the default settings, you may find that VPOP3 doesn't seem to work afterwards. This is because it may be that the new router allocates new IP addresses on your network.

Internet Explorer 10 Issues

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Internet Explorer 10 Issues If you are using IE10 with VPOP3 prior to v6.2, then you may have issues accessing the VPOP3 Webmail and/or admin settings. These can usually be solved by telling IE10 to use 'compatibility mode'. Alternatively, using another web browsers such as

ISP needs SSL connection

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

ISP needs SSL connection A few ISPs use a non-standard and not recommended system of encrypting connections to their SMTP mail servers. These generally are called 'SSL' connections and work on an alternate port other than the standard SMTP port 25. (The correct way to encrypt connections is to use a system called TLS which works on the standard SMTP port).

LAN Forward Warning: 452 (4.3.1 Insufficient system resources)

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

LAN Forward Warning: 452 (4.3.1 Insufficient system resources) If you get this message in VPOP3 it means that VPOP3 is trying to forward a message on to another mail server (probably Microsoft Exchange Server), and that other server is rejecting the message with the error

Locked Accounts

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Locked Accounts VPOP3 has a security feature which will lock out an account after it has had several failed login attempts. This feature is to make it harder for an attacker to use a brute force or dictionary password attack on an account. The default settings are that after more than 3 attempts to log into an account with an incorrect password, VPOP3 will lock the account for 30 minutes. You can change these settings on the

Message Downloads Not Completing

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Message Downloads Not Completing The normal reason for message downloads not completing is that a third-party antivirus program is scanning the messages and getting stuck at some point. We recommend that the first thing you do is to temporarily disable the email scanning part of any antivirus program or Internet Security software on the VPOP3 computer (other than those integrated fully with VPOP3 - i.e. 'avast! for VPOP3' or 'Sophos SAV Interface'). Usually that will solve the problem.

Messages being put into an 'Unwanted' folder

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Messages being put into an 'Unwanted' folder If incoming messages are being put into a folder called 'Unwanted' this may be due to the default Samsung Galaxy mail client's spam filtering. See:

Outlook behaviour when deleting messages from IMAP4

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Outlook behaviour when deleting messages from IMAP4 When you delete a message in Outlook it marks the message as deleted (putting a line through it). You have to 'purge' the mailbox to actually delete the message. See this Microsoft article for more information on this.

Outlook not able to connect to VPOP3 Enterprise v6.8 when using SSL/TLS

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Outlook not able to connect to VPOP3 Enterprise v6.8 when using SSL/TLS In VPOP3 6.8 SSL v2 is disabled by default (it is considered to be insecure). SSL v3 was released in 1996 and SSL v2 was deprecated because of the well known security flaws. However, it seems that Microsoft Outlook (up to at least Outlook 2010) will not connect to VPOP3 using SSL if VPOP3's SSL v2 is disabled.

Performance Requirements

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Performance Requirements The performance requirements for VPOP3 depends on many factors, so we can't give specific details for any scenario. How to detect limiting factors * Use the Windows Performance Monitor (perfmon.msc) * Add counters for:

PostgreSQL server won't start due to damaged log files

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

PostgreSQL server won't start due to damaged log files If the PostgreSQL server won't start at all, because its transaction logs are damaged, you will probably need to recreate the database store totally. To rebuild the database: * Open a command prompt and find the VPOP\pgsql folder

Redirect message for a user if a sender is a particular email address

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Redirect message for a user if a sender is a particular email address Say you want messages addressed to 'user1' to be redirected to 'user2' if they came from customer@domain.com This is an unusual requirement, so there is no way to do it in VPOP3.

Router Problem error messages

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Router Problem error messages If you get an error message to the VPOP3 administrator with subject Router Problem and text Local Distribute to Failed Error: Database Error "ERROR: could not open file "base//": Permission denied"

Anonymous (anonymous@undisclosed.example.com) — 2026-03-26T13:21:22+00:00

Anonymous (anonymous@undisclosed.example.com) — 2026-03-26T13:23:19+00:00

Anonymous (anonymous@undisclosed.example.com) — 2026-03-26T13:15:40+00:00

How to start VPOP3

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to start VPOP3 There are two ways to start VPOP3 * as a service * as a normal application For normal operation, you will start VPOP3 as a service, as this means that VPOP3 will run even when no one is logged into the PC. To help with some types of problem diagnosis it can be better to start it as an application. This makes VPOP3 run in the account of the currently logged in user, rather than the service account, so it can eliminate access permission problems. Also, when VPOP3 starts a…

How to stop VPOP3

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to stop VPOP3 You can stop VPOP3 by going to the Services applet in Windows, find the VPOP3 Email Server service and stop it, or, if you have the VPOP3 status monitor running with appropriate permissions, you can right-click that and choose 'Shutdown Server'

Undelete Messages in VPOP3 Enterprise v5 or later

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Undelete Messages in VPOP3 Enterprise v5 or later If a user accidentally deletes messages or a message folder, you can easily undelete this within a few days. The amount of time that messages are stored in the VPOP3 'recycle bin' is set in Settings

How To Upgrade VPOP3 to version 5 or later

Anonymous (anonymous@undisclosed.example.com) — 2019-11-08T15:37:52+00:00

How To Upgrade VPOP3 to version 5 or later Upgrading VPOP3 is usually a straightforward process. Download VPOP3 from our web site and back up your current installation just in case something goes wrong. Then simply run the installer that you downloaded and install it over the top of your existing VPOP3. All your settings and mail will be preserved.

How to upgrade VPOP3 to version 7 or later from version 6 or earlier

Anonymous (anonymous@undisclosed.example.com) — 2020-06-29T10:43:58+00:00

How to upgrade VPOP3 to version 7 or later from version 6 or earlier As usual the process to upgrade is simply to install the later version over your existing installation (do not uninstall anything first). The below is technical information detailing an extra step performed by the installer in this particular upgrade step.

User Administration

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

User Administration * Add a User * Delete a User * Changing a user's password * Remove user from Everyone List * Configure Email Signatures

How to move VPOP3 V3 to a new folder

Anonymous (anonymous@undisclosed.example.com) — 2018-12-05T15:25:41+00:00

How to move VPOP3 V3 to a new folder This guide assumes you want to move the whole of VPOP3 (including the message store) to a new folder on the same PC * Stop VPOP3 * Stop PostgreSQL * Remove the PostgreSQL service * Move VPOP3 to the new folder

How to move VPOP3 V5+ to a new folder

Anonymous (anonymous@undisclosed.example.com) — 2021-03-19T16:01:48+00:00

How to move VPOP3 V5+ to a new folder This guide assumes you want to move the whole of VPOP3 (including the message store) to a new folder on the same PC * Stop VPOP3 * Stop VPOP3DB * Remove the VPOP3DB service * Move VPOP3 to the new folder

VPOP3 Deleting messages as 'old' messages

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

VPOP3 Deleting messages as 'old' messages If VPOP3 says 'deleting old message' in the status window activity log that means that it has seen the unique ID of that message before, longer ago than the time specified for VPOP3 to leave messages on the server, so it thinks that the message is an old message, and so deletes it.

VPOP3 Historical Logger Backlog

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

VPOP3 Historical Logger Backlog This problem is primarily related to VPOP3 versions 2.5 -> 2.6. Theoretically it could happen on later versions, but would be extremely unusual (see the note at the bottom if you are using version 3.0 or later) You get an error message with subject

Web Based Administration

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Web Based Administration VPOP3 is administered through your web browser. You can access the administration settings by going to Start -> Programs -> VPOP3 -> Configure VPOP3 in Windows on the PC where VPOP3 is installed, or by right-clicking on the VPOP3 status monitor icon in the task tray, and choosing

VPOP3 Status Monitor Problems

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

VPOP3 Status Monitor Problems The VPOP3 Status Monitor is the program which shows the little (usually red) postbox icon in the Windows task tray. This usually launches automatically from the Windows startup group. This program is VPOP3Status.EXE on the disk, or can be run manually from

VPOP3 Server Access Not Allowed

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

VPOP3 Server Access Not Allowed If you get an error like: -ERR VPOP3 Server access not allowed! when trying to access VPOP3, then this means that the relevant server's IP Access Restrictions defined in VPOP3 do not allow access from your client computer.

How to write your own spam filter rules

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to write your own spam filter rules VPOP3's spam filter uses a basic scripting language designed for filtering email messages, so a full description of writing your own rules would be very long and complex, as it is really something that only a programmer should do.

LAN Forward Warning: 452 (4.3.1 Insufficient system resources)

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Webmail POST Actions

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Webmail POST Actions * SpellCheckAddWord * SpellCheckDelWord

Webmail Replacement Names

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Webmail Replacement Names * AutoresponderConditionList * AutoresponderInfo * AutoresponderGlobalList * AutoresponderList * MessageView4 * MinPasswordLength * UserId * UserNumber * UserRuleList * UserRuleActions * UserRuleConditions * UserRuleReorder * UserRuleUpdate * UserRuleActionUpdate * UserRuleConditionUpdate

Settings -> Admin Settings

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Settings -> Admin Settings The Admin Settings page allows you to perform three key functions: * * * Choosing a Main Administrator The Main Administrator receives notification emails, such as daily reports and errors/problems which may require manual intervention.

Archive Script

Anonymous (anonymous@undisclosed.example.com) — 2023-03-25T23:33:31+00:00

Archive Script (from VPOP3 v6 onwards) Archive scripting lets you indicate whether full message content should be stored in the message archive. This could be used, for instance, for filtering out messages containing credit card details. The message headers will still be archived, along with the explanation text returned by the script.

Message Archive -> Results Tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Message Archive -> Results Tab Settings -> Message Archive -> Results tab The Results tab only exists if you have previously done a search operation and are viewing the results of that search. The Results page shows you a list of the messages (up to 1000 entries are available) returned by the search. You can select multiple entries by using shift+click or ctrl+click

Attachment Extraction Scripting

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Attachment Extraction Scripting This is the 'extraction.lua' script. (Added in V6.17) This script has one functions: * Extract This functions is called if the attachment extraction is enabled in Settings -> Attachment Processing -> Extraction.

Database files used in VPOP3 2.x

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Database files used in VPOP3 2.x VPOP3 2.x usually uses SQLite 2.8.3 as its database engine. This stores databases in discrete *.db files in the VPOP3\_database directory on the server PC. We do not recommend that you access these databases directly unless you know what you are doing, and we strongly discourage the alteration of data in the databases directly unless technical support request you to.

Database query to get all lists and members

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Database query to get all lists and members At a command prompt in the VPOP3 directory run psql (The password is 'vpop3pass') Then, type \copy (select l.name, address from users.listmembers m inner join users.lists l on m.list=l.id) to 'c:/temp/x.csv' csv header;

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

This page lets you configure the IMAP4 server component of VPOP3. This is used for collecting mail from VPOP3, with all the IMAP4 facilities, such as folder sharing, synchronisation, access from anywhere, etc * General Tab * IP Access Restrictions Tab * Advanced Tab

IMAP4 Server Scripting

Anonymous (anonymous@undisclosed.example.com) — 2025-06-23T10:51:46+00:00

IMAP4 Server Scripting (Added in V6.12) DoCapability function When the IMAP4 CAPABILITY command is received, VPOP3 generates a capability string based on settings, then calls DoCapability(ipaddr, capabilities) * ipaddr = IP address of the client computer

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

See our online manual

LogDB.Recipients table

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

LogDB.Recipients table The LogDB.Recipients table contains a record of the recipients for messages logged by VPOP3. A message may have one or more recipients Columns * rcptid - this is a bigint sequential value which identifies the recipient uniquely in the database

LogDB.Sessions table

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

LogDB.Sessions table The LogDB.Sessions table contains a record of all 'sessions' logged by VPOP3. A session is something like a POP3 server session as an email client downloads messages, or an SMTP client session as VPOP3 sends a message out to the Internet, and so on.

loginaudit Database table

Anonymous (anonymous@undisclosed.example.com) — 2023-08-15T07:33:58+00:00

loginaudit Database table This contains data showing login attempts within the most recent 30 days * id - incrementing ID of loginaudit entry * ipaddress - IP address the login attempt came from * datetime - the date & time the event occurred

Lua SMTP MX Server Rules

Anonymous (anonymous@undisclosed.example.com) — 2026-02-24T15:50:03+00:00

Lua SMTP MX Server Rules Every time VPOP3 checks for remote MX server for sending messages using direct MX sending, it runs a script called mxserverrules.lua which can be created/edited in Settings -> Scripts (or in the VPOP3 directory in VPOP3 v6.6 or earlier).

Database query to make LAN Forwarding immediately attempt to dequeue all pending messages

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Database query to make LAN Forwarding immediately attempt to dequeue all pending messages If VPOP3 cannot send messages using LAN Forwarding it will queue the message and retry periodically. Usually there is no need to do anything special if there was a problem with the onward mail server which has now been fixed, VPOP3 should soon retry the messages automatically (based on the value of the

Management Scripting

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Management Scripting In VPOP3 Enterprise, from version 6.17 there is the facility to run Lua scripts manually or according to a schedule. These scripts can do things like access mail folders & messages and perform some maintenance on them. Creating a new script

Message Archive

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Message Archive The Message Archive facility is for VPOP3 to store copies of all messages sent or received. It stores the messages in a central archive store which can be searched by an administrator. The prime purpose of the archive facility is for recording messages in case of possible disputes, as you can see what was sent/received by email. It can also be used as a backup/restore facility in an emergency, but that is not its prime purpose, so it is better to have a proper

Misc -> DNS Tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Misc -> DNS Tab Settings -> Misc Settings -> DNS The DNS tab lets you specify which DNS servers VPOP3 will use. DNS (Domain Name System) is a system which converts Internet host names (eg www.google.com) into a numeric IP address (eg 1.2.3.4), because all connections on the Internet are actually performed using numeric IP addresses, but it is easier for people to remember names.

msgaudit Database table

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

msgaudit Database table This can (optionally) contain data showing how messages have been handled (eg deleted, moved, etc) * id - incrementing ID of msgaudit entry * datetime - the date & time the event occurred * component - which VPOP3 component performed the event

Reset Message Folder Counts

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Reset Message Folder Counts In extremely rare cases, the mail folder message counts in the database may get out of step with the actual stored messages. There are database triggers which will keep the counts in sync during normal operation, but if you have to manipulate the database directly (eg to recover from a corrupted database) it is possible that they will get out of step.

Security Settings -> Intrusion Protection Tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Security Settings -> Intrusion Protection Tab Settings -> Security Settings -> Intrusion Protection Tab Starting in VPOP3 v6.0, VPOP3 can monitor failed logins for all accounts across all services and block an attacker's IP address from accessing VPOP3 for a specified time

SMTP Server

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTP Server This page lets you configure the SMTP server component of VPOP3. This is how users send mail (either outgoing or internal), and also how VPOP3 receives incoming SMTP messages. In VPOP3 Enterprise, you can create multiple SMTP servers with different settings for instance, to allow SSL connections for local users using the older

SMTPStats.SMTPClientFailures table

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTPStats.SMTPClientFailures table The SMTPStats.SMTPClientFailures table contains logging data about errors/usage for the SMTP Services in VPOP3. These are used for the Intrusion Protection facility & logging. Columns * id - sequential ID for the event * ipaddress - the SMTP client's IP address

Spamfilter Rule Weights

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spamfilter Rule Weights To edit the spamfilter rule weights, go to Settings -> Spamfilter -> General -> Rule Weights The VPOP3 spamfilter contains several rules which test for certain things, eg 'adult words', or entries in real-time blacklist databases, or whitelisted email addresses etc.

Use the spam filter scripting to add fixed text to the subject on incoming messages

Anonymous (anonymous@undisclosed.example.com) — 2021-12-13T15:20:04+00:00

Use the spam filter scripting to add fixed text to the subject on incoming messages This needs VPOP3 version 5 or later. This script allows you to add fixed text to the subject an incoming message, eg so that users can see that a message is an incoming rather than local message (be aware of weaknesses in this strategy - eg forwarded messages, spoofing of the marker, breaking DKIM message signatures, etc)

Use the spam filter scripting to add random text to the subject on incoming messages

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Use the spam filter scripting to add random text to the subject on incoming messages This needs VPOP3 version 5 or later. This script is for the case where you want a message to the 'support' user to have the text [XXX-99999] added to an incoming message's subject if it does not already exist. Some people want this text to use as reference numbers for a

Increase the spam score for header marker

Anonymous (anonymous@undisclosed.example.com) — 2020-10-05T16:14:12+00:00

Increase the spam score for header marker This script is for the case where your ISP adds a header eg 'X-Spam: Yes' to the message header, and you want the VPOP3 spamfilter to quarantine messages with that marker. Add the following to the spamrules_userchecks.txt file. This script file only gets processed on incoming messages (the spamrules_localmail.txt script ends the processing of locally sent messages)

Spam Filter Rules: ForEach

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spam Filter Rules: ForEach Statement ForEach Version 2.1.7+ Purpose Causes a loop to be run through for all values within specified criteria The ForEach statement requires either two or three parameters (depending on the type of loop that is being conducted), in the format

Spam Filter Rules: IfLocalAddress

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spam Filter Rules: IfLocalAddress Statement IfLocalAddress Version 2.2.1+ Purpose Allows you to check if a specified email address is local to your VPOP3 installation IfLocalAddress requires just one paramater; the address, in the format IfLocalAddress

Spam Filter Rules: Redirect

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spam Filter Rules: Redirect Statement Redirect Version 2.1.7+ Purpose Remove all original recipients, and send the message to the specified recipient (and optionally folder) Examples To redirect the message to the Postmaster user's inbox Redirect Postmaster

Increase the spam score for subject marker

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Increase the spam score for subject marker This script is for the case where your ISP adds a marker eg '[spam]' to the message subject, and you want the VPOP3 spamfilter to quarantine messages with that marker. Add the following to the spamrules_userchecks.txt file. This script file only gets processed on incoming messages (the spamrules_localmail.txt script ends the processing of locally sent messages)

Spam Filter Rules: Variables

Anonymous (anonymous@undisclosed.example.com) — 2023-08-14T16:01:01+00:00

Spam Filter Rules: Variables The VPOP3 spam filter script language supports simple variables. In most places these are specified as ${}, but in some places they are just specified as - for instance where a statement always puts its result into a variable.

Status Monitor (port 5109) protocol

Anonymous (anonymous@undisclosed.example.com) — 2019-08-19T08:58:45+00:00

Status Monitor (port 5109) protocol This page documents the protocol used between VPOP3 and the Status Monitor. It's not intended for any other purpose, so it's a bit limited, but in certain cases you may find this useful Login Before the Status Monitor receives any updates or can issue commands it must log in using a user's credentials.

Prune Rules

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Prune Rules The Edit User -> Prune Rules tab can be used to create/edit rules which cause messages to be automatically deleted according to specified criteria. To add or edit a “prune rule”, press the Add Rule button. This will add a new rule to the table, with a set of default settings. Don't worry, this rule doesn't take effect until you press the Submit button.

User Routing Script

Anonymous (anonymous@undisclosed.example.com) — 2023-03-27T10:32:18+00:00

User Routing Script If there is a /user_redirect.lua script, this Lua script can override VPOP3's message routing options. You can edit this either in the Settings -> Scripts page in the settings, or via the 'Routing' tab in the user's settings in the VPOP3 administration console. This script affects how VPOP3 will handle how messages

Users.Autoresponders table

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Users.Autoresponders table The Users.Autoresponders table contains the users' autoresponder definitions Columns * autoresponderid - this is a numeric id of the autoresponder entry (primary key) * owneruser - this is the numeric id of the user which the autoresponder belongs to (or 0 for a 'template' autoresponder)

VPOP3.GetFolders Lua function

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

VPOP3.GetFolders Lua function The Lua management function 'VPOP3.GetFolders' retrieves a table containing all the mail folders for a specified user. VPOP3.GetFolders(username); It returns a table where the key is the folder name (in IMAP4 UTF-7 encoded format - see