PSCS Wiki

SMTP Server Lua Scripting

Anonymous (anonymous@undisclosed.example.com) — 2025-05-08T08:23:35+00:00

SMTP Server Lua Scripting The SMTP Server Lua Script is called SMTPSVR.LUA and can be edited from the Settings -> Scripts page in the VPOP3 settings. This script is called whenever an instance of the VPOP3 SMTP server is launched - ie whenever someone opens a connection to port 25 on the VPOP3 server to send it a message, whether from a local user or an incoming SMTP message.

Lua SMTP Relay Control

Anonymous (anonymous@undisclosed.example.com) — 2025-08-14T09:24:55+00:00

Lua SMTP Relay Control Every time VPOP3 is going to send messages via SMTP Relay, it runs a script called relayout.lua in the VPOP3 directory. Global Variables This script may have global variables, depending on your version of VPOP3. In VPOP3 3.0.0L and later, there are two read-only global variables set at the start of the script:

Mail Sender Advanced Settings

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Mail Sender Advanced Settings Mail Connectors -> Mail Senders -> (name) -> Advanced Advanced Domain Filtering For VPOP3 v6.11 and later, see the Domain Filtering section of the user manual. The Domain Filtering box lets you restrict which email messages are sent via this Mail Sender. You specify each rule on a separate line, and the message will be sent if it matches any sender rule

Address Book tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Address Book tab The Address Book tab within VPOP3 webmail enables you to manage your lists of contacts and add those contacts into a new or existing message. Substantial alterations to the interface were introduced in version 5. Both interfaces are documented.

Lua SMTP MX Server Rules

Anonymous (anonymous@undisclosed.example.com) — 2026-02-24T15:50:03+00:00

Lua SMTP MX Server Rules Every time VPOP3 checks for remote MX server for sending messages using direct MX sending, it runs a script called mxserverrules.lua which can be created/edited in Settings -> Scripts (or in the VPOP3 directory in VPOP3 v6.6 or earlier).

Mail Connectors -> Mail Senders -> SMTP Direct

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Mail Connectors -> Mail Senders -> SMTP Direct VPOP3 can be configured to send mail directly to the recipient's mail server (or the recipient's mail service provider). Usually this is only used if you have a high-end business class Internet connection - such as a leased line, or your mail server is co-located in a data centre. Attempts to use SMTP Direct sending on a dial-up/ADSL/Cable/FTTC/etc connection may be problematic since the receiving mail server may think you a home user who has been …

Message Archive -> General

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Message Archive -> General Settings -> Message Archive -> General Tab Archive Messages If the Archive Messages box is checked, then VPOP3 will archive incoming and outgoing messages. Main Archive Store Directory You can set the message archive store to any directory accessible by the VPOP3 service. Enter the path in the

Database -> Restore Tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Database -> Restore Tab This tab is only in VPOP3 Enterprise (v5 and later), and is for performing a partial (mailbox/mail folder) restore of the database. To do a full restore of the database, or for VPOP3 Basic/Standard, see the “Restore a Backup of VPOP3” topic Using the

Database schema used in VPOP3 5.x

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Database schema used in VPOP3 5.x Note that all information in this section is subject to change. We do not guarantee that the database schema will remain constant, even between minor upgrade versions, so use this information at your own risk. Do not alter the database schema used by VPOP3 (including indexes, triggers & functions) or your whole VPOP3 data store may collapse.

Lua Scripting

Anonymous (anonymous@undisclosed.example.com) — 2026-03-26T23:49:01+00:00

Lua Scripting Lua is a simple scripting programming language often used for embedding in other applications. VPOP3 uses it to customise behaviour in places where most people will be happy with the default behaviour, but occasionally people will want to do something more complicated. Rather than having lots of extra options to complicate things for most users, we have opted to go for a more flexible scripting facility.

Lua SMTP MX Control

Anonymous (anonymous@undisclosed.example.com) — 2026-02-24T15:49:48+00:00

Lua SMTP MX Control Every time VPOP3 is going to send messages using direct MX sending, it runs a script called mxout.lua which can be created/edited in Settings -> Scripts (or in the VPOP3 directory in VPOP3 v6.6 or earlier). Global Variables Starting with v8.8, the following global variables are defined:

msgaudit Database table

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

msgaudit Database table This can (optionally) contain data showing how messages have been handled (eg deleted, moved, etc) * id - incrementing ID of msgaudit entry * datetime - the date & time the event occurred * component - which VPOP3 component performed the event

Mail Connectors -> Connector Schedule

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Mail Connectors -> Connector Schedule The Connector Schedule tells VPOP3 when to connect to send mail using Mail Senders and collect mail using Mail Collectors. It does not affect incoming SMTP over a permanent connection, or LAN Forwarding. The connection schedule also tells VPOP3 when to check for updates to the

SMTP Direct Sender Settings

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTP Direct Sender Settings Mail Connectors -> Mail Senders -> SMTP Direct Sender -> Settings tab The SMTP Direct Settings tab lets you set how VPOP3 will send mail using SMTP Direct DNS Servers to Use This setting tells VPOP3 the IP addresses of the DNS servers it should use to find the recipients' mail servers. Separate multiple addresses with commas.

Spam Filter Rules

Anonymous (anonymous@undisclosed.example.com) — 2023-01-18T15:57:13+00:00

Spam Filter Rules VPOP3 Versions 2.1.7 and later have a built-in spam filter system which supports a simple script language optimised for content- and spam-filtering of email messages. This reference contains a definition of the spam filtering script language supported by VPOP3. Note that as later versions of VPOP3 are released, more language features may be added, so this reference indicates in which version of VPOP3 a particular feature was added.

Spam Filter Rules: Convert

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spam Filter Rules: Convert Statement Convert Version 2.4.9+ Purpose Allows you to convert data from one form to another The Convert statement requires a data parameter, conversion method and variable name, in the format Convert

Archive Script

Anonymous (anonymous@undisclosed.example.com) — 2023-03-25T23:33:31+00:00

Archive Script (from VPOP3 v6 onwards) Archive scripting lets you indicate whether full message content should be stored in the message archive. This could be used, for instance, for filtering out messages containing credit card details. The message headers will still be archived, along with the explanation text returned by the script.

Attachment Extraction Scripting

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Attachment Extraction Scripting This is the 'extraction.lua' script. (Added in V6.17) This script has one functions: * Extract This functions is called if the attachment extraction is enabled in Settings -> Attachment Processing -> Extraction.

Database files used in VPOP3 2.x

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Database files used in VPOP3 2.x VPOP3 2.x usually uses SQLite 2.8.3 as its database engine. This stores databases in discrete *.db files in the VPOP3\_database directory on the server PC. We do not recommend that you access these databases directly unless you know what you are doing, and we strongly discourage the alteration of data in the databases directly unless technical support request you to.

DMARC Reporter Script

Anonymous (anonymous@undisclosed.example.com) — 2023-11-12T09:51:40+00:00

DMARC Reporter Script (from VPOP3 v8.6 onwards) This script lets you customise how VPOP3 sends DMARC reports to the sending domain. This can be useful in case the sending domain's DMARC configuration is incorrect as that can cause errors sending the reports or cause messages to be 'stuck' in VPOP3's Outqueue. These problems won't cause any lasting damage, but may be inconvenient or annoying, so you can alter the behaviour using Lua scripting

Message Archive

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Message Archive The Message Archive facility is for VPOP3 to store copies of all messages sent or received. It stores the messages in a central archive store which can be searched by an administrator. The prime purpose of the archive facility is for recording messages in case of possible disputes, as you can see what was sent/received by email. It can also be used as a backup/restore facility in an emergency, but that is not its prime purpose, so it is better to have a proper

Outgoing Message Scripting

Anonymous (anonymous@undisclosed.example.com) — 2024-03-21T10:49:54+00:00

Outgoing Message Scripting Every time VPOP3 adds a message to the Outgoing mail queue, it runs a script called outmessage.lua. Scripts are stored as files in the VPOP3 directory in VPOP3 v6.6 and earlier, or managed through the Settings -> Scripts page in VPOP3 v6.7 and later.

VPOP3 Reference

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

VPOP3 Reference This is a reference guide for VPOP3 version 3 or later's settings. For details on how to do things, rather than what a particular button does, see the how to section. Also see the online manual: * Users * Lists * Mappings * Mail Connectors * Services * Settings * Status * Reports * About * Status Monitor *

Scheduled Task Script

Anonymous (anonymous@undisclosed.example.com) — 2021-08-09T10:55:07+00:00

Scheduled Task Script Note that this functionality is only available in VPOP3 Enterprise VPOP3 Enterprise can run Lua script periodically to do custom background tasks. It can run a function every minute, 5 minutes, hourly or daily. The Lua script is stored in a file called

Scheduling Management Scripts

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Scheduling Management Scripts VPOP3 runs a script called scheduler.lua in the background, it will periodically call functions in this script at approximately 1 minute, 5 minute, 1 hour and 1 day intervals. These times are only approximate so should not be relied upon for timing.

Signature Script

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Signature Script If you want more complex signatures on outgoing emails, rather than the static text/HTML you can define within VPOP3, then you can use a simple Lua script to define the signature. The Lua script is stored in a file called signature.lua

SMTP Service -> Advanced Tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTP Service -> Advanced Tab Services -> SMTP Server -> Advanced Tab Refuse SMTP Connections from This setting should be rarely needed, and should be normally left blank. It is here for historic purposes. If you put some text in this box, then VPOP3 will refuse any SMTP connections from clients whose 'HELO'/'EHLO' command data contains the text specified here as a substring. Eg, if this setting is set to '.myisp.com', then VPOP3 would refuse SMTP connections from any client which sends the c…

SMTP -> Load Limiting tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTP -> Load Limiting tab This page is reached from Services -> SMTP Server, then the Load Limiting tab. Here you can set limits on how many active SMTP sessions there are, and other related settings. This lets you limit the load on the VPOP3 server. This is especially important if VPOP3 is performing spam filtering on incoming SMTP messages, because the spam filter can add considerable load. You can reduce the spamfilter load by using the

Use the spam filter scripting to add fixed text to the subject on incoming messages

Anonymous (anonymous@undisclosed.example.com) — 2021-12-13T15:20:04+00:00

Use the spam filter scripting to add fixed text to the subject on incoming messages This needs VPOP3 version 5 or later. This script allows you to add fixed text to the subject an incoming message, eg so that users can see that a message is an incoming rather than local message (be aware of weaknesses in this strategy - eg forwarded messages, spoofing of the marker, breaking DKIM message signatures, etc)

Use the spam filter scripting to add random text to the subject on incoming messages

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Use the spam filter scripting to add random text to the subject on incoming messages This needs VPOP3 version 5 or later. This script is for the case where you want a message to the 'support' user to have the text [XXX-99999] added to an incoming message's subject if it does not already exist. Some people want this text to use as reference numbers for a

Spam Filter Rules: DefineRule

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spam Filter Rules: DefineRule Statement DefineRule Version 2.1.9+ Purpose Defines a rule name, default weighting and description. See Rule names and weights The DefineRule statement requires a name, default weight and description, in the format DefineRule "" ""

Spam Filter Rules: GetDecodedSection

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spam Filter Rules: GetDecodedSection Statement GetDecodedSection Version 2.1.11+ Purpose Returns a specified MIME section of a message into a variable, after processing any Base64 or Quoted-Printable encoding of the raw message data The GetDecodedSection

User Advanced settings

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

User Advanced settings The Edit User → Advanced tab contains some 'advanced' settings for a VPOP3 user. Message Recycle Bin In VPOP3 Enterprise (v5 and later) the Message Recycle Bin will keep messages in the message store for a short time after the user has deleted the messages. This is to allow easier recovery from the inevitable case where a user has deleted messages by mistake, and wants them back.

User Delivery Script

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

User Delivery Script (VPOP3 v6.5 or later) If there is a /delivery.lua script, this Lua script can override VPOP3's message delivery options. You can edit this in the Settings -> Scripts page in the settings. This script affects how VPOP3 will handle how messages being delivered to this user are handled.

User Manager Script

Anonymous (anonymous@undisclosed.example.com) — 2024-04-22T08:37:38+00:00

User Manager Script If you want people to be able to log in using a different username than their VPOP3 username (eg if you want them to be able to log in using an email address), then you can use the UserManager Lua script The Lua script is managed through the Settings → Scripts page in VPOP3 v8.0 and later and is called 'UserManager.LUA.

Users.AutoresponderConditions table

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Users.AutoresponderConditions table The Users.AutoresponderConditions table contains a record of all autoresponder trigger conditions created in VPOP3. These tell VPOP3 when a particular autoresponder should fire for a particular user. Each autoresponder can have zero or more conditions. An autoresponder with zero conditions will never fire but can be reactivated later by adding a new condition.

VPOP3.SetSetting

Anonymous (anonymous@undisclosed.example.com) — 2021-03-09T16:37:10+00:00

VPOP3.SetSetting The Lua function 'VPOP3.SetSetting' sets a general setting forVPOP3 It takes two parameters: * The name of the setting. This can either by the 'Name' field of the 'Settings.Settings' database table or the internal setting name * The data to set (must be a string)

Spamfilter White/Blacklists

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spamfilter White/Blacklists This lets you set whitelists & blacklists for the spam filter. There are four lists you can manage. The Whitelist Addresses & Blacklist Addresses lists let you specify sender email addresses to check. With the default rule weights, if a sender's address is on the Whitelist, it will be allowed through the spam filter, and if it is on the Blacklist it will be blocked. If an address is on both the Whitelist and the Blacklist, they will cancel each other out, and the me…