PSCS Wiki

Restore Deleted Calendars

Anonymous (anonymous@undisclosed.example.com) — 2022-11-18T11:43:52+00:00

Restore Deleted Calendars This article will help if a user has been deleted and all their calendars are lost and need to be restored. Note that this functionality is not built into VPOP3, and requires the use of Python3 to run a script First you need to install Python 3.8 or later, and the psycopg2 plugin

Repairing corrupted database

Anonymous (anonymous@undisclosed.example.com) — 2024-01-15T11:35:45+00:00

Repairing corrupted database With PostgreSQL (as with most high-end databases) the database system will automatically recover after power failures etc, if it can. If it can't then there is no manual 'repair' function, because the data cannot totally be recovered (or it would automatically have been recovered).

Performance Requirements

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Performance Requirements The performance requirements for VPOP3 depends on many factors, so we can't give specific details for any scenario. How to detect limiting factors * Use the Windows Performance Monitor (perfmon.msc) * Add counters for:

How to move messages between users

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to move messages between users There are several ways to do this, depending on your exact needs Via Administrator Console You can view a user's 'Inbox' messages by clicking on the message count on the Users list, then select the messages, choose the target user, and press the

Installation checklist

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Installation checklist This list contains some things you may want to check before or after installing VPOP3 to make sure it's not going to encounter any common issues. Before installation * Make sure that VPOP3 is not installed on a RAID 5 or RAID 6 array.

Mail Not Downloading From ISP

Anonymous (anonymous@undisclosed.example.com) — 2026-04-06T17:59:47+00:00

Mail Not Downloading From ISP This normally happens because you have told VPOP3 to Leave Messages On Server (on the Mail Connectors -> Mail Collectors -> (name) -> POP3 General tab). If you do this, VPOP3 will leave messages on the ISP's mail server for several days, and remember that it has already downloaded them. Then, the next time it connects it will see that there are some messages waiting, but it may find that it has already downloaded them, so it won't download them again.

VPOP3 Deleting messages as 'old' messages

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

VPOP3 Deleting messages as 'old' messages If VPOP3 says 'deleting old message' in the status window activity log that means that it has seen the unique ID of that message before, longer ago than the time specified for VPOP3 to leave messages on the server, so it thinks that the message is an old message, and so deletes it.

French Webmail Language File

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

French Webmail Language File Copy/paste the text below to a file 'french.lng' or 'francais.lng' in the VPOP3 directory. (French users, feel free to update/correct the text below) #login page logintitle=VPOP3 Login webadminlogin=web admin login webmaillogin=web mail login enterusername=You must specify your VPOP3 username here bookmarksnotsupported=I'm sorry, but your web browser does not support this function. You will have to add this page to your bookmarks manually. loginfailed=Login Faile…

How to make VPOP3 re-download POP3 messages from the ISP

Anonymous (anonymous@undisclosed.example.com) — 2026-04-06T17:57:00+00:00

How to make VPOP3 re-download POP3 messages from the ISP If you have the VPOP3 Mail Collector setting Leave Mail On Server enabled, then VPOP3 will leave your messages on the ISP POP3 server for the specified number of days after downloading it. If, during this time, you want to make VPOP3 download those messages again, then you can do so.

German Webmail Language Page

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

German Webmail Language Page Copy/paste the text below to a file 'german.lng' in the VPOP3 directory. (German users, feel free to update/correct the text below) #login page logintitle=VPOP3 Login webadminlogin=web admin login webmaillogin=Webmail Anmeldung enterusername=Sie müssen einen Benutzernamen angeben bookmarksnotsupported=I'm sorry, but your web browser does not support this function. You will have to add this page to your bookmarks manually. loginfailed=Anmeldung fehlgeschlagen …

How to Install VPOP3

Anonymous (anonymous@undisclosed.example.com) — 2021-03-08T10:48:40+00:00

How to Install VPOP3 Simply download VPOP3 from the website, and run the installation program and follow the prompts. Occasionally people may have problems with the PostgreSQL part of the installation. If that happens, please contact us either by email at support@pscs.co.uk or by phone to +44 (0)1484 855800, and we will do our best to help.

Spanish Webmail Language File

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spanish Webmail Language File Copy/paste the text below to a file 'spanish.lng' or 'espanol.lng' in the VPOP3 directory. (Spanish users, feel free to update/correct the text below) #login page logintitle=VPOP3 Login webadminlogin=web admin login webmaillogin=web mail login enterusername=Especificar aca el usuario de Correo bookmarksnotsupported=Disculpe, pero su navegador no soporta esta funcion. loginfailed=Login Fallido - Favor reintente nuevamente invalidlogin=Detalles del login inválidos…

Using a Mobile Phone with VPOP3

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Using a Mobile Phone with VPOP3 Many people want to use a mobile phone to send/receive their email nowadays. This is usually easy to do with VPOP3. The recommended way is to have the phone connect directly to VPOP3 for sending/receiving email. To do this, you need to do three things:

Error message: Your connection has been blocked temporarily - Try again later

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Error message: Your connection has been blocked temporarily - Try again later If you get an error message in your email client software saying Your connection has been blocked temporarily - Try again later or Server access temporarily blocked! Please try again later

Android - Stock Client

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Android - Stock Client Warning If you use the stock email client from Android 4.x, then be VERY careful if you are using POP3 download. It appears that the stock client will download all the messages from your mail server every time it checks for mail, so you could use a

Data stream contained NUL character

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Data stream contained NUL character Description of the problem NUL characters (bytes with value 0) are not allowed in email messages and should not be transmitted over POP3, SMTP or IMAP4 except in certain circumstances. If an attachment contains such a byte it must be encoded using

VPOP3 Database Size

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

VPOP3 Database Size The VPOP3 directory is stored in the VPOP3\pgsql\data folder and subfolders. If you are concerned about the size of the VPOP3 database, there are several factors which may make the database larger than you would expect: * The VPOP3 database contains a lot more information than just messages in mailboxes. This can include settings, outgoing messages, historical logging information, statistical information for the spamfilter, information about archived messages, etc. Also,…

SMTP error 'Invalid HELO name'

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTP error 'Invalid HELO name' When sending mail you may get an error from the remote SMTP server saying something like 'Invalid HELO name' This happens if the host name configured in VPOP3 does not look like a valid Internet host name (e.g. 'mail.domain.com'). Some SMTP servers don't bother checking this value because it has no authentication value at all, but a few do check that it looks correct.

VPOP3 - POP3 Client Problem

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

VPOP3 - POP3 Client Problem These errors occur whilst VPOP3 is communicating with your ISP's POP3 mail server to retrieve your mail. The server connection was closed unexpectedly If the message text is Error with Pop3 Client (XXXX (YY)) The server connection was closed unexpectedly

Seeing where a message came from

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Seeing where a message came from Sometimes you need to check to see where a message really came from. The 'From:' email address is easily forged, so that cannot be relied upon. The first thing you have to do is to get the full message headers. These may look daunting, but are very useful for problem diagnosis.

Calendars

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Calendars To use the calendar facility in VPOP3 you need a CalDAV aware client. We have tested it with the free Mozilla Sunbird & Lightning products as well as the emClient email client. These products need a URL to be able to access the CalDAV data store. Once you have the URL (see below), copy it into the

-ERR Mailbox Locked error

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

-ERR Mailbox Locked error If your email client displays an '-ERR Mailbox Locked' or '-ERR [IN-USE] Mailbox Locked' error when trying to log into VPOP3 it means that the mailbox is locked. The POP3 standard requires that POP3 mailboxes have an 'exclusive lock' on them when they are in use. This means that only one POP3 client can access the mailbox at once. Also, if a POP3 mailbox is currently accessing a mailbox, then no IMAP4, Webmail or administrator access is allowed to the mailbox at the s…

Error Messages

Anonymous (anonymous@undisclosed.example.com) — 2025-10-06T15:21:37+00:00

Error Messages This is the place to look if you are trying to trouble shoot a problem and you have received or have access to a specific error message or error code. If instead your problem is that something you think is set up correctly is not working then the best place to look would be the

How to filter attachments

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to filter attachments VPOP3 can filter attachments in several ways. The most general is to use the Settings -> Attachment Processing -> Filtering tab as described below. VPOP3 can also filter attachments using the content/spam filter, or by using an integrated virus scanner.

Recovering messages from corrupted database into fresh database

Anonymous (anonymous@undisclosed.example.com) — 2025-09-11T13:48:07+00:00

Recovering messages from corrupted database into fresh database If the VPOP3 message database is corrupted, then one option is to build a fresh database and restore the settings into it, then recover the messages from the old database using the 'Message Restore' function in VPOP3. This has minimal downtime, but old messages will not all be available until the restore has completed. New messages will be available quickly, and you will be able to send messages.

Sender Domain Must Resolve

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Sender Domain Must Resolve If you receive an 'SMTP Client Error' something like: 451 (user@domain.com) Sender Domain Must Resolve this means that the ISP's mail server cannot find the domain.com part of the email address. Often this means that the FROM address of the message is invalid, or that the

Signing outgoing mail with DKIM

Anonymous (anonymous@undisclosed.example.com) — 2020-07-22T10:32:40+00:00

Signing outgoing mail with DKIM DKIM, also known as DomainKeys Identified Mail, is a form of email authentication that digitally signs emails to prove that they were sent from authorized domains and aren't fake emails. Companies like Google and Yahoo use DKIM to sign their emails and it is becoming ever more popular.

The message could not be loaded. Please return to the Quarantine page and try again

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

The message could not be loaded. Please return to the Quarantine page and try again This error normally means the message file has been deleted from the hard disk (probably by a virus scanner or something else on the PC). If you can find the message in the VPOP3 settings (Settings

Move VPOP3 Version 3 or 4 to a new PC

Anonymous (anonymous@undisclosed.example.com) — 2019-11-12T16:09:08+00:00

Move VPOP3 Version 3 or 4 to a new PC Moving VPOP3 Version 3 or 4 to a new PC is slightly different from moving earlier versions, because of the database system. The summary of steps is: * Stop VPOP3 on the original PC * Manually make a backup of the database on the original PC

VPOP3 Status Monitor Problems

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

VPOP3 Status Monitor Problems The VPOP3 Status Monitor is the program which shows the little (usually red) postbox icon in the Windows task tray. This usually launches automatically from the Windows startup group. This program is VPOP3Status.EXE on the disk, or can be run manually from

Spamfilter Whitelist & Blacklist

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spamfilter Whitelist & Blacklist The VPOP3 spamfilter has a whitelist and a blacklist for sender addresses. It also has a whitelist and blacklist for words/phrases. You can view these lists in the VPOP3 settings by going to Settings -> Spamfilter ->

535 Authentication Failed

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

535 Authentication Failed This is an SMTP error meaning that an attempt to authenticate has failed. If this error is appearing when the email client is trying to log into VPOP3, then you can check the VPOP3 'SECURITY.LOG' file which may contain more information, such as an invalid password, unknown username, etc. (This information is not returned in the SMTP session because it would help an attacker).

550 5.7.1 Relaying not allowed! Bad sender IP address

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

550 5.7.1 Relaying not allowed! Bad sender IP address This SMTP error message means that the computer which is sending the message is not permitted to send outgoing messages based on the VPOP3 SMTP Service's Access Restrictions. This is probably because someone is trying to send messages from outside your local network, and you have not configured VPOP3 to allow this. You have to be careful when allowing this, because you may configure VPOP3 to be an open-relay, which is a

550 5.7.1 Unable to Relay for...

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

550 5.7.1 Unable to Relay for... When trying to send emails from your email client software you get an error in your email client 550 5.7.1 Unable to relay for ... This error is happening because you have installed the Microsoft IIS SMTP Service, and your email client is talking to that service rather than to VPOP3.

Error 1068 - the dependency service or group failed to start

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Error 1068 - the dependency service or group failed to start If you get an error 1068 when you try to start VPOP3, then this usually means that the VPOP3DB service (if you are using VPOP3 v5 and later) did not start. In this case try starting that service manually and see what error message is generated then.

Error 1348 - The validation information class requested was invalid

Anonymous (anonymous@undisclosed.example.com) — 2022-12-21T23:35:22+00:00

Error 1348 - The validation information class requested was invalid We have had a report of this error when VPOP3 is trying to access a file share, eg for storing backups or archived messages. In the case where it was reported, it turned out that a Windows Update had converted a 'local' user account into a 'Microsoft' account and that was preventing VPOP3 from accessing the file share, because VPOP3 was trying to use a local account.

Socket Error 10047 - Addresses in the specified family cannot be used with this socket

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Socket Error 10047 - Addresses in the specified family cannot be used with this socket Meaning: Addresses in the specified family cannot be used with this socket This error only normally occurs during VPOP3 startup. There are two main possible reasons for this error:

Socket Error 10049 - The specified address is not available from the local computer

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Socket Error 10049 - The specified address is not available from the local computer This error normally means that you have entered an invalid address on the IP Address to Bind To entries on the Services page in the VPOP3 settings. The addresses entered here should be either

Socket Error 11002 - Host not found (Non-Authoritative answer)

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Socket Error 11002 - Host not found (Non-Authoritative answer) This means that VPOP3 is not getting a response from a DNS server when it is trying to look up the name of the ISP's mail server(s). Usually this means that Windows either does not know the address of a valid

Allow Remote Access to VPOP3 Mailboxes

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Allow Remote Access to VPOP3 Mailboxes Sometimes people want to be able to access their office VPOP3 mail server from a remote site or mobile phone etc. These instructions assume you have a permanent Internet connection (eg ADSL, Cable etc). If you don't have a permanent Internet connection, see

Alternative method of automatically starting VPOP3

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Alternative method of automatically starting VPOP3 VPOP3 usually automatically starts as a Windows service. Sometimes this does not work, either because other services need to start first, or Windows is going very slowly at startup, causing the database service to time out, or there are certain database control files which did not get cleared after a previous Windows shutdown.

How to Backup VPOP3

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to Backup VPOP3 By default VPOP3 v3 and later will automatically perform a daily backup of the database into a file called DBBACK-x.DMP, where the backup file rotates on a weekly basis (DBBACK-0.DMP is Sunday's backup, DBBACK-1.DMP is Monday's backup, etc).

Configure SRS

Anonymous (anonymous@undisclosed.example.com) — 2025-08-18T15:28:11+00:00

Configure SRS In VPOP3 8.8 and later, you can use Lua scripting to implement 'SRS' (Sender Rewriting Scheme') in VPOP3 This involves adding a couple of functions to rewrite outgoing return paths in 'relayout.lua' or 'mxout.lua' as appropriate and a couple of functions to redirect rewritten bounce message recipients in 'smtpsvr.lua'

Database & Disk Caching

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Database & Disk Caching Disk Caching One key point is that, like all other high-end databases, PostgreSQL should not be run on a server with disk level write back caching. With write back caching, the disk will report data as being written to disk when it is still in the disk's cache memory. If the power then fails, this data is lost and can cause database corruption. As long as the database server really knows when the data has been written to disk, power failure will not cause database corru…

Database Maintenance

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Database Maintenance VPOP3 uses the PostgreSQL database server for most of its data storage. Normally this will not require any special maintenance, because it will manage itself. To do any special database maintenance you will need to close down VPOP3 first, because PostgreSQL needs exclusive access to the database to perform any operations such as decreasing the size of database files. Note that these operations may take some time! There are some PostgreSQL utility programs in the VPOP3\pgs…

Delete OutQueue messages directly from the database

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Delete OutQueue messages directly from the database If there is an extremely large number of messages (eg hundreds of thousands) in the VPOP3 OutQueue, then it may take a very long time for VPOP3 v5 and later to start as it check the message database tables for consistency during initialisation.

-ERR Can't open the message file - it's gone!

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

-ERR Can't open the message file - it's gone! If VPOP3 receives the error message “-ERR Can't open the message file - it's gone!” from your ISP's POP3 server when it is downloading messages, this is a symptom of a fundamental bug in your ISP's POP3 server.

-ERR Unknown User

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

-ERR Unknown User -ERR Unknown User is a POP3 error. There are two places you can receive it: * If you receive it as part of a 'POP3 Client Error' email message from VPOP3, then it means that VPOP3 was unable to log on to your ISP's mail server because the ISP POP3 server reported an error

Error Message Handling

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Error Message Handling VPOP3 will normally send an error message to the Main Administrator every time it encounters an error. We recommend you leave it like this in most cases - if an error message occurs repeatedly, then it usually means there's an underlying problem which needs resolving rather than ignoring.

Exceptions

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Exceptions An exception happens if VPOP3 encounters a problem it did not expect. In some cases it can recover automatically, but in other cases that isn't possible. Common causes VPOP3 2.6 and earlier In VPOP3 2.6 and earlier it was quite common for there to be database corruption problems with the SQLite database which was used in those versions.

How to 'share' domains between Exchange and VPOP3

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to 'share' domains between Exchange and VPOP3 If you want to have a VPOP3 server and Exchange Server using the same email domain, then you need to ensure that Exchange does not think it is 'authoritative' for the domain in question. See for details of how to do this in Exchange 2000 and 2003 (a similar process may be used in later versions of Exchange - contact your Microsoft Support technician if you need more help).

Outlook/Windows Messaging reports "No transport provider is available"

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Outlook/Windows Messaging reports "No transport provider is available" If Outlook or Windows Messaging reports No transport provider is available when trying to connect to VPOP3, it can mean several things. (This must be a contender for “the world's most meaningless error message

Not Working As Expected

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Not Working As Expected This is the page to come to if you think you've set something up correctly but it isn't doing what you think it should be doing. If you're getting an error message or some other concrete indication that something has actually 'gone wrong' then the

How to Obtain Error Logs

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to Obtain Error Logs As part of diagnosing a support issue our support team may ask you to send them various log files. This page explains how to obtain the right files at the right time. How Logging Works Under its default settings VPOP3 logs a minimal amount of information about what it is doing to various files in the main VPOP3 directory. When investigating a support issue it is often the case that we will need you to switch on logging to extra files or increase the level of detail be…

PostgreSQL Replication

Anonymous (anonymous@undisclosed.example.com) — 2019-02-06T17:10:31+00:00

PostgreSQL Replication PostgreSQL 9.1 (used in VPOP3 5 and later) supports replication from a 'Master' to a 'Slave' database server. This can be used with VPOP3 for having a near-realtime backup of your settings & messages. To use the replication, you need to have a file share which is accessible from both PCs. The thing to watch out for is that the PostgreSQL services may be running as a different user from the currently logged in user, so make sure that the user(s) which the PostgreSQL servi…

Problems accessing VPOP3 Settings

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Problems accessing VPOP3 Settings If you have problems accessing the VPOP3 settings: * Go to Start -> Programs -> VPOP3 -> Configure VPOP3 on the VPOP3 computer. That should open up a web browser and take you to the login page * If VPOP3 doesn't show the login page, and shows a '403' error page instead, that means that the access restrictions for the WebMail service have been restricted so that this computer cannot access the WebMail service.

Problems sending mail via BT from your own domain

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Problems sending mail via BT from your own domain BT Internet only allow you to send mail through their mail servers from your BT Internet address or other registered address. Attempts to send from other addresses will give you a 553 SMTP error message.

Problems sending messages to spam@

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Problems sending messages to spam@ If a VPOP3 user forwards a message to spam@, then the VPOP3 spam filter will train itself that that message was spam. If, when you forward the message, you get an error message like: Subject: Mail Delivery Failure Delivery Failure Report. The following message was incorrectly addressed. Recipient: "spam" is unrecognised.

Anonymous (anonymous@undisclosed.example.com) — 2026-03-26T13:19:59+00:00

Restore a database backup

Anonymous (anonymous@undisclosed.example.com) — 2025-12-17T09:19:40+00:00

Restore a database backup By default VPOP3 makes a daily backup of the VPOP3 database to a file 'DBBACK-n.DMP' in the VPOP3 installation directory (it is possible to change this in the settings). These are cycled on a weekly basis so you will usually have the last seven days' worth of backups. These can be useful if the database gets damaged somehow.

VPOP3 - SMTP Client Problem

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

VPOP3 - SMTP Client Problem These errors occur whilst VPOP3 is communicating with your ISP's SMTP mail server to send your mail. If the message text is: Error with SMTP Client (XXXX (YY)) The server connection was closed unexpectedly Then this means that the the connection between VPOP3 and your ISP's SMTP mail server was closed when VPOP3 did not expect it to be. This can be caused by the network connection failing or a bug in the ISP's mail server which drops the connection in abnormal circ…

Training the VPOP3 Spam Filter

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Training the VPOP3 Spam Filter The VPOP3 spam filter has a couple of mechanisms which can be used to 'train' it to distinguish between spam and not-spam. Bayesian Filter The Bayesian filter this looks at words in messages sent and received and their probabilities of being contained in spam and not-spam, and works out an overall probability of the message being spam or not-spam based on the combination of those probabilities.

Transmission Receipt Message

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Transmission Receipt Message This is not an error message, but we are listing it here because it confuses some people. VPOP3 sends a 'Transmission Receipt' when a message is sent out, and it contains a header asking for the receipt. The default configuration is that it will send the transmission receipt if the sender asks for a read receipt.

Troubleshooting Tips

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Troubleshooting Tips Telnet One of the most basic, and useful, tools for troubleshooting email systems is a Telnet client. Installing Telnet Client Unfortunately, since Windows XP, Microsoft do not install the Telnet client into Windows by default, so you may need to install the Telnet client yourself.

How To Upgrade VPOP3 to version 5 or later

Anonymous (anonymous@undisclosed.example.com) — 2019-11-08T15:37:52+00:00

How To Upgrade VPOP3 to version 5 or later Upgrading VPOP3 is usually a straightforward process. Download VPOP3 from our web site and back up your current installation just in case something goes wrong. Then simply run the installer that you downloaded and install it over the top of your existing VPOP3. All your settings and mail will be preserved.

Upgrading VPOP3 to version 8.x from v7 or earlier

Anonymous (anonymous@undisclosed.example.com) — 2020-09-03T15:07:34+00:00

Upgrading VPOP3 to version 8.x from v7 or earlier VPOP3 v8.x uses PostgreSQL 10 as its database engine, which is the latest supported 32 bit version of PostgreSQL. Later versions of PostgreSQL are 64-bit only, which means we cannot use them while continuing to support 32 bit versions of Windows.

Upgrading PostgreSQL Database Software

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Upgrading PostgreSQL Database Software To upgrade the PostgreSQL database software used by VPOP3 * stop VPOP3 * backup the database () * uninstall PostgreSQL (from within Windows) if necessary * rename the VPOP3\pgsql folder to something else

VPOP3 cannot access PostgreSQL - timeout expired

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

VPOP3 cannot access PostgreSQL - timeout expired This is an error which may be logged in the Windows event log It is event 4547 from the source 'VPOP3' If the event message DLL is not correctly installed it may display as: The description for Event ID ( 4547 ) in Source ( VPOP3 ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this desc…

VPOP3 Historical Logger Backlog

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

VPOP3 Historical Logger Backlog This problem is primarily related to VPOP3 versions 2.5 -> 2.6. Theoretically it could happen on later versions, but would be extremely unusual (see the note at the bottom if you are using version 3.0 or later) You get an error message with subject

VPOP3 re-downloading old messages from the ISP POP3 server

Anonymous (anonymous@undisclosed.example.com) — 2026-01-05T09:31:47+00:00

VPOP3 re-downloading old messages from the ISP POP3 server If you tell VPOP3's POP3 mail collector to leave messages on the ISP's server for a few days, you may find that sometimes VPOP3 will redownload all the messages from the ISP mailbox again.

VPOP3 Server Access Not Allowed

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

VPOP3 Server Access Not Allowed If you get an error like: -ERR VPOP3 Server access not allowed! when trying to access VPOP3, then this means that the relevant server's IP Access Restrictions defined in VPOP3 do not allow access from your client computer.