PSCS Wiki

GDPR for VPOP3 self-hosted software

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

GDPR for VPOP3 self-hosted software VPOP3 is an email server program, it is not a service, so if you use VPOP3 on your own computer we are not a “data controller” or a “data processor” under GDPR rules as we never see any of your data (unless you give us permission to remotely connect to your PC for technical support purposes).

Mappings

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Mappings In VPOP3, Mappings are a way of explicitly linking an email address to a user or list. They can also be used to indicate that an email address is remote, even though it would otherwise appear to be a local email address. In other email servers, a similar feature may be called 'aliases'

Sending mail from different email addresses or domains

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Sending mail from different email addresses or domains VPOP3 does not (by default) place any restrictions on which email addresses or domains you can send mail from. However, there may be external restrictions on which email addresses/domains you can send from. For instance, if you send mail through your ISP's mail server, they may only allow you to send mail from specific addresses, or the domain you send mail from may have a sender policy defined, such as

ListServer Commands

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

ListServer Commands The ListServer is an automated process in VPOP3 which manages mailing lists. People can send commands to the ListServer to perform various functions remotely. Whether these commands are allowed, and exactly how they work depends on the particular mailing list's settings.

GDPR for hosted VPOP3 service

Anonymous (anonymous@undisclosed.example.com) — 2025-10-14T15:43:01+00:00

GDPR for hosted VPOP3 service (Since Brexit, the UK has “UK GDPR” instead of “EU GDPR”, so this document refers to UK GDPR) Also see GDPR for VPOP3 as most of that applies to the VPOP3 hosting service as well. This Data Processing Agreement is part of our hosted VPOP3 service terms. You can view the revision history by clicking on the 'clock' icon to the right.

Setting up VPOP3 to work with Exchange 2003

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Setting up VPOP3 to work with Exchange 2003 The instructions below are for Exchange Server 2003. For other versions of Exchange see here. You can link VPOP3 to Exchange Server, so that Exchange Server sends outgoing mail through VPOP3 and VPOP3 sends any incoming mail directly to Exchange Server.

Exchange 2007

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Exchange 2007 You can link VPOP3 to Exchange Server, so that Exchange Server sends outgoing mail through VPOP3 and VPOP3 sends any incoming mail directly to Exchange Server. You should first of all set up VPOP3 to send and receive Internet email as normal.

Quarantine Report Mailer Scripting

Anonymous (anonymous@undisclosed.example.com) — 2026-05-26T12:55:21+00:00

Quarantine Report Mailer Scripting (Added in v9.1) This script is called when VPOP3 is mailing out (or considering mailing out) spamfilter quarantine reports. It allows customisation of the emailed reports and whether they're generated AreMailsNeeded

SMTP Service -> Advanced Tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTP Service -> Advanced Tab Services -> SMTP Server -> Advanced Tab Refuse SMTP Connections from This setting should be rarely needed, and should be normally left blank. It is here for historic purposes. If you put some text in this box, then VPOP3 will refuse any SMTP connections from clients whose 'HELO'/'EHLO' command data contains the text specified here as a substring. Eg, if this setting is set to '.myisp.com', then VPOP3 would refuse SMTP connections from any client which sends the c…

German Webmail Language Page

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

German Webmail Language Page Copy/paste the text below to a file 'german.lng' in the VPOP3 directory. (German users, feel free to update/correct the text below) #login page logintitle=VPOP3 Login webadminlogin=web admin login webmaillogin=Webmail Anmeldung enterusername=Sie müssen einen Benutzernamen angeben bookmarksnotsupported=I'm sorry, but your web browser does not support this function. You will have to add this page to your bookmarks manually. loginfailed=Anmeldung fehlgeschlagen …

Groups

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Groups In VPOP3 a 'group' is mainly an administrative feature. If you only wish to have a list of email addresses to send messages to under one address, you should use the 'List' feature instead. The main function of Groups is to let you set certain user attributes for a whole group of users at once.

SMTP Relay Service FAQ

Anonymous (anonymous@undisclosed.example.com) — 2021-06-29T08:35:43+00:00

SMTP Relay Service FAQ We provide an SMTP Relay Service for many of our customers. The price starts from £40 (+VAT if applicable) per year, for up to 5000 messages, or 750MB, per month. How do I order the SMTP Relay Service? To order the SMTP relay service, either email

French Webmail Language File

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

French Webmail Language File Copy/paste the text below to a file 'french.lng' or 'francais.lng' in the VPOP3 directory. (French users, feel free to update/correct the text below) #login page logintitle=VPOP3 Login webadminlogin=web admin login webmaillogin=web mail login enterusername=You must specify your VPOP3 username here bookmarksnotsupported=I'm sorry, but your web browser does not support this function. You will have to add this page to your bookmarks manually. loginfailed=Login Faile…

Using a Mobile Phone with VPOP3

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Using a Mobile Phone with VPOP3 Many people want to use a mobile phone to send/receive their email nowadays. This is usually easy to do with VPOP3. The recommended way is to have the phone connect directly to VPOP3 for sending/receiving email. To do this, you need to do three things:

Autoresponder Global Scripting

Anonymous (anonymous@undisclosed.example.com) — 2026-03-23T15:29:29+00:00

Autoresponder Global Scripting For scripting to modify the autoresponder text which is embedded in the autoresponder itself, see Autoresponder Scripting The Autoresponder Global Script is executed for every autoresponse. It is stored in the 'Autoresponder.lua' script in Settings → Scripts

End()

Anonymous (anonymous@undisclosed.example.com) — 2026-05-29T10:39:35+00:00

End() End() This function is called by VPOP3 when the SMTP service session ends SMTP Server Lua Scripting The SMTP Server Lua Script is called SMTPSVR.LUA and can be edited from the Settings -> Scripts page in the VPOP3 settings. This script is called whenever an instance of the VPOP3 SMTP server is launched - ie whenever someone opens a connection to port 25 on the VPOP3 server to send it a message, whether from a local user or an incoming SMTP message.

How do I write an email to technical support?

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How do I write an email to technical support? Please send the email to support@pscs.co.uk Note that free technical support is currently only available for version 3.0 and later When sending the email, please make sure you include all relevant information:

Configure Email Signatures

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Configure Email Signatures * Global Signatures * Personal Signatures * Webmail Signatures Notes When creating a signature it is generally best to keep it as short as possible. Disclaimers & confidentiality notices in emails are generally regarded as having little or no legal significance, so lengthy signatures just use up bandwidth.

Lists

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Lists The Lists section in VPOP3 lets you view and manage the various types of 'List' which VPOP3 supports * Distribution Lists * Mailing Lists * Forwardings * ODBC Mailing Lists * Groups Using a list A list will contain zero or more 'members' (usually email addresses) which can be messaged all at once. To send a message to all the members of a list, you will usually send an email to the listname at a valid domain.

550/553 Not Permitted error from BT Internet's mail servers

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

550/553 Not Permitted error from BT Internet's mail servers BT Internet's mail servers only allow messages to be sent from 'approved' email addresses. If you try to send messages from other addresses BT's mail servers may return a '550 Not Permitted' error, a '553' error, or may silently discard the message depending on what their server feels like doing today.

How to send a fax by email using the VPOP3 FaxServer

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to send a fax by email using the VPOP3 FaxServer VPOP3 2.1.0 and later together with the VPOP3 FaxServer software allows you to send specially crafted emails to VPOP3 to have them sent as faxes. To do this, send an email to fax@ . The email subject will be the subject of the fax used on the fax cover page. The email should be in plain text (not

Sender Policy Framework / SPF

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Sender Policy Framework / SPF SPF is a system used to tell mail servers which IP addresses can send mail from which domains. It is designed to reduce 'spoofing' of email addresses. For instance, if you receive an email message from your bank, your mail software can check that it came from an IP address authorised to send mail from your bank, and treat the message with suspicion if it didn't come from an authorised IP address.

Transmission Receipt Message

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Transmission Receipt Message This is not an error message, but we are listing it here because it confuses some people. VPOP3 sends a 'Transmission Receipt' when a message is sent out, and it contains a header asking for the receipt. The default configuration is that it will send the transmission receipt if the sender asks for a read receipt.

Misc -> Advanced Tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Misc -> Advanced Tab Settings -> Misc Settings -> Advanced You will normally not need to change any settings on this page unless VPOP3 technical support have suggested it. If you do make changes, and want to go back to the original settings, the Restore Defaults button will restore the settings to their defaults.

SMTP Reputation Stats

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTP Reputation Stats (Added in v6.20) If you receive email by direct incoming SMTP (not via an ISP or filtering service) then you can tell VPOP3 to report sender reputation statistics back to VPOP3. This is enabled/disabled in the Settings -> Misc Settings page.

How do I get support?

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How do I get support? You can get support for our software products in several ways. By telephone * You can purchase an annual priority support contract. The cost depends on your current VPOP3 licence, and costs 50% of the licence price per year (with a minimum of £100) per software licence (+VAT if applicable) . This entitles you to software upgrades, remote support and telephone support during UK office hours and priority email support where we aim to respond to your email within 3 hours …

POP3 Protocol

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

POP3 Protocol POP3 is the most basic email protocol for collecting mail which is in common use. Almost all email client programs (such as Microsoft Outlook & Outlook Express, Mozilla Thunderbird, etc) can collect mail using POP3. With POP3, mail is usually downloaded by the email client and stored on the user's local PC. It is then deleted from the mail server, so the only copy is on the user's PC. Any mail folders etc are all managed on the user's PC.

What is the VPOP3 Antivirus solution?

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

What is the VPOP3 Antivirus solution? “VPOP3 Antivirus” is a new product to replace the avast! for VPOP3 product which will no longer be supported after the end of 2012. VPOP3 Antivirus uses the popular 'ClamAV' virus scanner to scan incoming and outgoing messages for viruses.

Backscatter

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Backscatter In email, “backscatter” is the term used if you send bounce messages back to spam messages. As most spam messages use forged email addresses, then the bounce messages will go to an innocent person, who will find them very annoying. Stopping VPOP3 from sending Backscatter

How to move messages between users

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to move messages between users There are several ways to do this, depending on your exact needs Via Administrator Console You can view a user's 'Inbox' messages by clicking on the message count on the Users list, then select the messages, choose the target user, and press the

Spanish Webmail Language File

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spanish Webmail Language File Copy/paste the text below to a file 'spanish.lng' or 'espanol.lng' in the VPOP3 directory. (Spanish users, feel free to update/correct the text below) #login page logintitle=VPOP3 Login webadminlogin=web admin login webmaillogin=web mail login enterusername=Especificar aca el usuario de Correo bookmarksnotsupported=Disculpe, pero su navegador no soporta esta funcion. loginfailed=Login Fallido - Favor reintente nuevamente invalidlogin=Detalles del login inválidos…

Using VPOP3 with Microsoft Exchange Server

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Using VPOP3 with Microsoft Exchange Server You can link VPOP3 to Exchange Server, so that Exchange Server sends outgoing mail through VPOP3 and VPOP3 sends any incoming mail directly to Exchange Server. You should first of all set up VPOP3 to send and receive Internet email as described in the online help.

Address Book tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Address Book tab The Address Book tab within VPOP3 webmail enables you to manage your lists of contacts and add those contacts into a new or existing message. Substantial alterations to the interface were introduced in version 5. Both interfaces are documented.

ListServer Settings

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

ListServer Settings Settings -> ListServer Settings In VPOP3, the ListServer is an automated 'user' which handles mailing list requests, such as subscribe & unsubscribe commands. Anyone can send an email to the ListServer to subscribe to (public) mailing lists, or unsubscribe from mailing lists they are on, or see a list of public mailing lists etc.

SMTP -> General tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTP -> General tab This page is reached from Services -> SMTP Server, then the General tab. This page lets you set general settings for the SMTP service component of VPOP3. The SMTP service is how users send outgoing mail, and how incoming SMTP messages arrive. Service Name

Spamfilter.Whitelist table

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spamfilter.Whitelist table The Spamfilter.Whitelist table contains the spamfilter whitelist entries which do not contain wildcards or regular expressions. They are separated out to speed up checking. Columns * address - this is the email address in the whitelist

Spamrules example - increase spam score if there are many links in the email

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spamrules example - increase spam score if there are many links in the email This script is for the case where you to increase the spamminess of emails where the email contains many links - in this case we'll say if the email contains 10 or more links. Note that we do not necessarily recommend that you do this as it is not a very good indicator of spam, and will probably catch a lot of newsletter type emails, but it is something we've been asked for, so here it is.

Spam Filter Rules: GetAddressType

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spam Filter Rules: GetAddressType Statement GetAddressType Version 2.4.6+ Purpose Analyses a specified email address and reports what 'type' of address it is The GetAddressType statement requires an email address and variable name, in the format

Encryption

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Encryption There are several different encryption methods used on the Internet which are relevant to VPOP3. Current versions of VPOP3 Basic will be able to connect to other POP3 or SMTP servers using either SSL or TLS. This allows you to use VPOP3 to access services such as GMail which require SSL/TLS.

GDPR for other hosting services (eg web hosting)

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

GDPR for other hosting services (eg web hosting) As a hosted service provider, we are classed as a “Data Processor” under the GDPR regulations. For our hosting services: * Data is held in the UK. Data is not transmitted outside of the EU except at your explicit request or command.

Lost Licence Details

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Lost Licence Details If you have lost your VPOP3 licence key, we will be able to find it for you, but we do have to make a nominal charge of £5.00 (+ VAT if applicable) to search for it as it is a time consuming task. If you need us to do this search, then email sales@pscs.co.uk.

550 5.7.1 Unable to Relay for...

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

550 5.7.1 Unable to Relay for... When trying to send emails from your email client software you get an error in your email client 550 5.7.1 Unable to relay for ... This error is happening because you have installed the Microsoft IIS SMTP Service, and your email client is talking to that service rather than to VPOP3.

VPOP3 Is Responding Slowly

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

VPOP3 Is Responding Slowly If VPOP3 is responding slowly to users there are several common causes: * The VPOP3 server disk may be badly fragmented. Defragment the server disk(s). Note that sometimes the Windows defragmenter will say that the disk doesn't need defragmenting even if it does, so it is best to do it anyway. Also, there is a better free defragmenter available called

Mail Sender Advanced Relay Settings

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Mail Sender Advanced Relay Settings SMTP Return Address The SMTP Return Address (or Return Path) is a hidden part of a message which says where bounce messages (and other automated responses) should be sent. (It is not the same as the Reply address

How To Allow Mail Relay Through VPOP3

Anonymous (anonymous@undisclosed.example.com) — 2025-05-21T07:57:18+00:00

How To Allow Mail Relay Through VPOP3 If you are allowing remote access into VPOP3 to collect mail then you may also want those remote users to be able to send their outgoing mail through VPOP3 as well. This is more complex than allowing users to collect mail, because, by default, SMTP connections are not authenticated. This means that when someone tries to send a message through VPOP3, VPOP3 doesn't know who that user is. This can cause a problem if unauthorised users try to send mail through…

How to create an SSL Certificate

Anonymous (anonymous@undisclosed.example.com) — 2026-03-23T10:18:43+00:00

How to create an SSL Certificate VPOP3 Enterprise supports SSL certificates for encrypted sessions. The basic mechanism to create an SSL certificate is that you have to generate a CSR (Certificate Signing Request) then send that to a CA (Certificate Authority) who will sign your certificate and give you the certificate back.

How To Encrypt Sessions

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How To Encrypt Sessions VPOP3 Enterprise 2.6 and later supports SSL/STARTTLS encrypted sessions to VPOP3 itself. So, the email client or web browser will encrypt the data passed to VPOP3 so it cannot be intercepted. This requires an SSL Certificate to be created for VPOP3.

-ERR Unknown User

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

-ERR Unknown User -ERR Unknown User is a POP3 error. There are two places you can receive it: * If you receive it as part of a 'POP3 Client Error' email message from VPOP3, then it means that VPOP3 was unable to log on to your ISP's mail server because the ISP POP3 server reported an error

How to Forward Messages to an External Address

Anonymous (anonymous@undisclosed.example.com) — 2025-08-18T15:13:06+00:00

How to Forward Messages to an External Address There are two possible methods to forward messages to an external address: * Use this method if it is for a person who might want to receive their email whilst in the office and/or get the mail sent to an external address.

General instructions for setting up an email client

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

General instructions for setting up an email client If your specific email client program is not listed, you can set up any other email client by using the following instructions: * In your email client create a new 'account' * For the incoming and outgoing server name/address use the

Using IMAP4 with VPOP3 Enterprise

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Using IMAP4 with VPOP3 Enterprise VPOP3 Enterprise supports IMAP4 email clients (VPOP3 Basic does not). With IMAP4 the email folders and messages are stored on the mail server. The email client then synchronises with the server. Also, unlike with POP3, several things can access the same mailbox at once.

How to Install VPOP3

Anonymous (anonymous@undisclosed.example.com) — 2021-03-08T10:48:40+00:00

How to Install VPOP3 Simply download VPOP3 from the website, and run the installation program and follow the prompts. Occasionally people may have problems with the PostgreSQL part of the installation. If that happens, please contact us either by email at support@pscs.co.uk or by phone to +44 (0)1484 855800, and we will do our best to help.

How to configure Mozilla Thunderbird

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to configure Mozilla Thunderbird This article won't show you all the possible settings in Thunderbird, because there are so many. Thunderbird is one of the most powerful & flexible email clients available at the time of writing, especially if you use IMAP4 (with VPOP3 Enterprise).

Sharing IMAP4 folders

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Sharing IMAP4 folders Some email clients will allow you to share IMAP4 folders from within the client itself (eg eM Client) or have plugins to allow this (eg Mozilla Thunderbird with the Imap-ACL extension). In that case, you will need to see the documentation for that to set up sharing.

Signing outgoing mail with DKIM

Anonymous (anonymous@undisclosed.example.com) — 2020-07-22T10:32:40+00:00

Signing outgoing mail with DKIM DKIM, also known as DomainKeys Identified Mail, is a form of email authentication that digitally signs emails to prove that they were sent from authorized domains and aren't fake emails. Companies like Google and Yahoo use DKIM to sign their emails and it is becoming ever more popular.

Spamfilter Whitelist & Blacklist

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spamfilter Whitelist & Blacklist The VPOP3 spamfilter has a whitelist and a blacklist for sender addresses. It also has a whitelist and blacklist for words/phrases. You can view these lists in the VPOP3 settings by going to Settings -> Spamfilter ->

Error message: Your connection has been blocked temporarily - Try again later

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Error message: Your connection has been blocked temporarily - Try again later If you get an error message in your email client software saying Your connection has been blocked temporarily - Try again later or Server access temporarily blocked! Please try again later

Delete list member from all lists

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Delete list member from all lists You can delete an email address from all VPOP3 distribution & mailing lists. Go to Settings → Database → Query Alternatively, at a command prompt in the VPOP3 directory run psql (The password is 'vpop3pass')

DMARC Reporter Script

Anonymous (anonymous@undisclosed.example.com) — 2023-11-12T09:51:40+00:00

DMARC Reporter Script (from VPOP3 v8.6 onwards) This script lets you customise how VPOP3 sends DMARC reports to the sending domain. This can be useful in case the sending domain's DMARC configuration is incorrect as that can cause errors sending the reports or cause messages to be 'stuck' in VPOP3's Outqueue. These problems won't cause any lasting damage, but may be inconvenient or annoying, so you can alter the behaviour using Lua scripting

Global Signature

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Global Signature You can set a Global Signature in VPOP3 by going to Settings -> Global Signature The Global Signature option lets you tell VPOP3 to add a standard piece of text or HTML to the bottom of all outgoing messages. You can create just a plain text, or

Import Users From File

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Import Users From File VPOP3 supports the importation and exportation of users, via a CSV file (see for a specification of the CSV file format). NOTE: This process is not designed to provide a complete backup of user data, nor is it intended to facilitate moving VPOP3 to a new computer. Instead, see the following relevant pages:

POP3 Server -> General Tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

POP3 Server -> General Tab Services -> POP3 Server -> General tab This page sets the general settings for the POP3 service component in VPOP3. The POP3 service is how users collect their email from VPOP3 using a POP3 email client Service Name The Service Name is a name you give the service for your reference. It is only used in administrative displays and logging, so the name doesn't matter. Most people leave it at the default.

Signature Script

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Signature Script If you want more complex signatures on outgoing emails, rather than the static text/HTML you can define within VPOP3, then you can use a simple Lua script to define the signature. The Lua script is stored in a file called signature.lua

Summary Log File Format

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Summary Log File Format VPOP3 creates a file called SUMMARY.LOG in the VPOP3 directory which contains summary information which is compiled daily into a daily summary reports sent to the administrator. VPOP3 can keep these summary logs in a subdirectory called

Autoresponder

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Autoresponder An autoresponder is a way of automatically replying to messages as they arrive in a user's mailbox. In VPOP3, an incoming message must arrive in a user's mailbox for the autoresponder to trigger. If you use forwards, assistants, mappings, etc to divert a message before it arrives in the mailbox, the autoresponder will never trigger. If you want to use an autoresponder, but not keep the original message, then make sure the message arrives in the mailbox (eg by using an 'Assistant'…

Message Rules

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Message Rules The Edit User -> Message Rules tab can be used to create/edit rules which are processed when messages arrive in a User's mailbox. They can be used to copy messages, mark them as read, delete them, etc VPOP3 will process Message Rules in the order they appear in the list. If you want to change the order of the rules, you can drag & drop them into the correct order. Usually when VPOP3 has processed a rule, it will go on to check further rules, but you can use the

Permissions

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Permissions This section lets you configure the permissions that a particular user has. Allowed Protocols The Allowed Protocols section lets you specify which services this user has access to. Note that these settings affect access to the whole service. If you want users to be able to access a service from some IP addresses, but not from others, then use the

VPOP3.SendMessage

Anonymous (anonymous@undisclosed.example.com) — 2021-08-09T10:58:46+00:00

VPOP3.SendMessage The Lua function 'VPOP3.SendMessage' sends a text email message It takes four parameters: * The email address of the sender * The email address of the recipient * The subject line * The message body The function returns one value:

Spamfilter White/Blacklists

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spamfilter White/Blacklists This lets you set whitelists & blacklists for the spam filter. There are four lists you can manage. The Whitelist Addresses & Blacklist Addresses lists let you specify sender email addresses to check. With the default rule weights, if a sender's address is on the Whitelist, it will be allowed through the spam filter, and if it is on the Blacklist it will be blocked. If an address is on both the Whitelist and the Blacklist, they will cancel each other out, and the me…

How can I place an order

Anonymous (anonymous@undisclosed.example.com) — 2018-12-05T15:24:44+00:00

How can I place an order Online The easiest way to place an order is online. Click on the Purchase item in our website navigation bar, and select the appropriate product. You will be presented with a price list. Choose the required item and click the

How do I login to the PSCS website?

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How do I login to the PSCS website? You can access your licence details and invoices on the www.pscs.co.uk website. To log into the website click the Login button at the top right of the website. You will log in using the email address you specified linked to your account (usually the email address you used when placing your order) and your password. The password is initially randomly generated and emailed to you with your invoice(s). If you have not received the password, or have forgotten i…

Windows Server Port Conflicts

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Windows Server Port Conflicts LDAP Server Conflict When you run VPOP3 on a server edition of Windows you may receive an error saying LDAP server not started - couldn't bind socket port 389 (10048) This error happens because VPOP3 contains an LDAP (Lightweight Directory Access Protocol) server for its global address book functionality, and the Windows 2000/2003 'Active Directory Service' also uses LDAP as its mechanism. These two services are conflicting.

550 5.7.1 Relaying not allowed! Bad sender IP address

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

550 5.7.1 Relaying not allowed! Bad sender IP address This SMTP error message means that the computer which is sending the message is not permitted to send outgoing messages based on the VPOP3 SMTP Service's Access Restrictions. This is probably because someone is trying to send messages from outside your local network, and you have not configured VPOP3 to allow this. You have to be careful when allowing this, because you may configure VPOP3 to be an open-relay, which is a

Allow Remote Access to VPOP3 Mailboxes

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Allow Remote Access to VPOP3 Mailboxes Sometimes people want to be able to access their office VPOP3 mail server from a remote site or mobile phone etc. These instructions assume you have a permanent Internet connection (eg ADSL, Cable etc). If you don't have a permanent Internet connection, see

Android - Stock Client

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Android - Stock Client Warning If you use the stock email client from Android 4.x, then be VERY careful if you are using POP3 download. It appears that the stock client will download all the messages from your mail server every time it checks for mail, so you could use a

Error expanding recipient - Nesting Level too deep

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Error expanding recipient - Nesting Level too deep You receive an error message saying: Error expanding recipient "" Nesting Level too deep (51) Check the configuration for loops (Note the '51' number may be slightly different - that's the nesting level - anything over 50 is detected as an error)

Initial Configuration Tasks

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Initial Configuration Tasks After installing VPOP3, you will need to get into the VPOP3 settings. The easiest way of doing this is to find the VPOP3 Status Monitor in the Windows task tray. Right-click this icon, and choose 'VPOP3 Settings'. (If that doesn't work, see this article to troubleshoot Status Monitor problems). Alternatively, on the VPOP3 PC, you can go to Start

IMAP4 'Ghost Folders'

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

IMAP4 'Ghost Folders' Sometimes your IMAP4 email client may show folders in the folder tree, but when you select them, you get an error that the folder does not exist. This happens because IMAP4 has the concept of being able to 'subscribe' to folders - this means that you can hide folders by unsubscribing from them.

"How To" Articles

Anonymous (anonymous@undisclosed.example.com) — 2026-03-18T20:20:50+00:00

"How To" Articles Installation/Upgrades * Download VPOP3 * Install VPOP3 * Move VPOP3 * Upgrade VPOP3 * Upgrade VPOP3 to version 5.x or 6.x from version 4 or earlier * Upgrade VPOP3 to version 7.x from version 6 or earlier * Upgrade VPOP3 to version 8.x from version 7 or earlier * Upgrade VPOP3 to version 9 or later from version 7 or 8 * Performance Requirements * Installation Checklist General Configuration * Initial Configuration * Users * Add an Alias * Create…

How to tell VPOP3 that some users in the local domain are not to be handled by VPOP3

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to tell VPOP3 that some users in the local domain are not to be handled by VPOP3 In some situations you will have a situation where most of your users are handled by VPOP3, but several users will collect their mail directly from a separate POP3 account on your ISP, even though they may have an email address on the same domain as other users.

Installation conficts

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Installation conficts During installation, the installer program does some basic checks for conflicting software. This is software which is providing the same services as the VPOP3 software - i.e. SMTP, POP3 and/or LDAP services. For POP3/SMTP it will show the text which the conflicting software announces itself as.

Setting up an iPhone/iPad/iPod Touch

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Setting up an iPhone/iPad/iPod Touch To set up an iPhone to access VPOP3's mail, you first of all need to configure VPOP3 to allow access by remote users (unless you will only be using the iPhone in the office, connected via WiFi to the office LAN). Adding the mail account to your iPhone/iPad

Make VPOP3 retry outgoing messages immediately

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Make VPOP3 retry outgoing messages immediately If VPOP3 has a temporary problem sending a message it will retry it later. When it will retry it depends on how many times it has already tried to send it, and is based on the 'Sender Retry' setting in the Mail Connectors

Outlook/Windows Messaging reports "No transport provider is available"

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Outlook/Windows Messaging reports "No transport provider is available" If Outlook or Windows Messaging reports No transport provider is available when trying to connect to VPOP3, it can mean several things. (This must be a contender for “the world's most meaningless error message

Obtaining Windows Event Log

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Obtaining Windows Event Log Sometimes, the VPOP3 technical support team may need to see entries from the Windows Event log, especially those relating to VPOP3 or the PostgreSQL service. If there are too many entries simply to copy, you can save them to a file to email to technical support.

PostgreSQL Replication

Anonymous (anonymous@undisclosed.example.com) — 2019-02-06T17:10:31+00:00

PostgreSQL Replication PostgreSQL 9.1 (used in VPOP3 5 and later) supports replication from a 'Master' to a 'Slave' database server. This can be used with VPOP3 for having a near-realtime backup of your settings & messages. To use the replication, you need to have a file share which is accessible from both PCs. The thing to watch out for is that the PostgreSQL services may be running as a different user from the currently logged in user, so make sure that the user(s) which the PostgreSQL servi…

SMTP Rule Example - restrict who can send to a local email address

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTP Rule Example - restrict who can send to a local email address If you have a local email address (a user, group or distribution list) and you want to restrict which email addresses can send messages to this address, you can use SMTP rules. There are a few ways you can configure the SMTP rules for this scenario.

Training the VPOP3 Spam Filter

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Training the VPOP3 Spam Filter The VPOP3 spam filter has a couple of mechanisms which can be used to 'train' it to distinguish between spam and not-spam. Bayesian Filter The Bayesian filter this looks at words in messages sent and received and their probabilities of being contained in spam and not-spam, and works out an overall probability of the message being spam or not-spam based on the combination of those probabilities.

Using VPOP3 Spam Filtering with LAN Forwarding

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Using VPOP3 Spam Filtering with LAN Forwarding When using the VPOP3 Spam filter with LAN forwarding you need to be aware a bit of how it works. The spam filter will only quarantine messages which are going to a VPOP3 user. This is because that user needs to be able to log into VPOP3 to be able to view their quarantined messages.

Settings -> Attachment Processing

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Settings -> Attachment Processing The Attachment Processing page allows you to configure VPOP3 to perform two distinct functions on messages that contain attachments: * * Filtering The Filtering tab is divided into four main sections: Attachment Filtering

Autoresponder scripting

Anonymous (anonymous@undisclosed.example.com) — 2025-05-28T09:24:38+00:00

Autoresponder scripting For scripting to alter the whole autoresponder definition and set in the VPOP3 settings rather than embedded in an autoresponder itself, see Autoresponder Global Scripting In an autoresponder, you can create a Lua script by surrounding it with & tags, eg

Settings -> Diagnostics

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Settings -> Diagnostics The Diagnostics page allows you to enable, configure and disable various methods of diagnostic logging, within VPOP3. Log file overview By default, VPOP3 will keep two copies of most log files: * The current log file, with a

LAN Forwarding Scripting

Anonymous (anonymous@undisclosed.example.com) — 2025-08-20T16:08:40+00:00

LAN Forwarding Scripting (Added in V8.7) This is stored in the 'LanForwarding.lua' script in Settings -> Scripts Pre-send These functions are called before the message is placed in the LAN Forwarding queue There are two global variables set: *

Monitor Scripting

Anonymous (anonymous@undisclosed.example.com) — 2019-08-27T16:13:40+00:00

Monitor Scripting (Added in V6.15) This script has three functions: * MonitorIncoming * MonitorInternal * MonitorOut The functions are similar, except they are called when different messages are to be monitored (incoming, internal and outgoing messages respectively).

Message Monitoring

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Message Monitoring Message monitoring in VPOP3 will tell VPOP3 to send a copy of all the outgoing, internal and/or incoming mail from/to specified users to be sent to another specified user. In the current versions of VPOP3, all monitored messages are sent to the same user (or list), you cannot specify different recipients for different monitored users. (This may be something that is added/enhanced in the future)

POP3 Mail Collection

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

POP3 Mail Collection POP3 Mail Collection is when VPOP3 will collect mail from an external POP3 mailbox - for instance, from an Internet Provider. POP3 General This page tells VPOP3 how to collect mail. * POP3 Server Address - this is the name (or IP address) of the POP3 server from which you want VPOP3 to collect mail

Route incoming POP3 mail by parsing message headers

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Route incoming POP3 mail by parsing message headers This routing method is generally used if you have a catch-all or 'multi-catch' mailbox with your Internet provider. With this method, VPOP3 will look at the To/Cc and other fields in the message headers to try to work out who the message is for. If the recipient is not listed in the headers (eg for BCCd mail) it may not be able to automatically detect who the message is for.

SMTP Server -> Spam Reduction

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTP Server -> Spam Reduction The Spam Reduction tab lets you configure various ways VPOP3 can reduce spam and email address spoofing Domainkeys “Domainkeys” is a way of signing a message to show that it comes from the person it claims to come from. The system is too complex to go into here, but it essentially takes key parts of the message header, as well as the message body and creates a PKI digital signature on it, using a 'private key' on your system. The receiving end will find the same…

Spamrules example - increase spam score for long sender domain

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spamrules example - increase spam score for long sender domain This script is for the case where you to increase the spamminess of emails where the sender's email address contains a long domain. In this case we'll say if the sender's domain has 20 or more characters in the first section (between the @ and first .). Note that we do not necessarily recommend that you do this as it is not a very good indicator of spam, but it is something we've been asked for, so here it is.

User Delivery Script

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

User Delivery Script (VPOP3 v6.5 or later) If there is a /delivery.lua script, this Lua script can override VPOP3's message delivery options. You can edit this in the Settings -> Scripts page in the settings. This script affects how VPOP3 will handle how messages being delivered to this user are handled.

VPOP3 Webmail Help

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

VPOP3 Webmail Help Webmail is a way of accessing your mail using a normal web browser. It is designed to be close in functionality to a 'normal' email client, so should be straightforward to use. If you use VPOP3 Enterprise, then the mail visible through the web browser will be the same as that visible through your IMAP4 email client - the IMAP4 client will synchronise with Webmail.

What is IMAP4

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

What is IMAP4 IMAP4 (Internet Mail Access Protocol V4) is a new mail retrieval protocol which can be used as an alternative to the POP3 (Post Office Protocol V3). The main difference between IMAP4 and POP3 is that with POP3 the messages are only stored temporarily on the mail server until they are downloaded to the email client where the messages are stored, manipulated, searched etc. With IMAP4 the messages are stored permanently on the server, and they are manipulated, searched etc on the ma…

Formatting Syntax

Anonymous (anonymous@undisclosed.example.com) — 2026-03-16T16:00:10+00:00

Formatting Syntax DokuWiki supports some simple markup language, which tries to make the datafiles to be as readable as possible. This page contains all possible syntax you may use when editing the pages. Simply have a look at the source of this page by pressing

UserRuleActions Replacement

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

UserRuleActions Replacement Use: ~userruleactions~ ~end~ Required parameter: Account, RuleId This returns the message rule actions for the specified rule The format string can have the replacements * id - numeric ID of the action * type - action type

What is Software Maintenance?

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

What is Software Maintenance? VPOP3 Software Maintenance includes basic email support (target turnaround within 3 days) as well as version upgrades (eg 6.19 to 6.20) free of charge when they are released during the period of validity of your Software Maintenance.

What is Software Maintenance?

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

What is Software Maintenance? VPOP3 Software Maintenance includes basic email support (target turnaround within 3 days) as well as version upgrades (eg 4.x to 5.x) free of charge when they are released during the period of validity of your Software Maintenance.

Socket Error 10053 - An established connection was aborted by the software in your host machine.

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Socket Error 10053 - An established connection was aborted by the software in your host machine. Error 10053 means that an established connection has been dropped. There are three descriptions of this error message we know about, but the descriptions are given by Windows, so they may vary depending on your version of Windows:

Attachments have been removed or renamed

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Attachments have been removed or renamed If you have received an email and one or more of its attachments have been removed or renamed, it might be a result of Attachment Filtering. You can inspect the filtering rules by going to Administration Settings -> Settings ->

Controlling VPOP3 via Email

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Controlling VPOP3 via Email You can control certain aspects of VPOP3 by sending emails to 'mailer_daemon@' The subject line must be one of the lines below: * Set Assistant * Query Assistant * Password * Set Forwarding * Query Forwarding

Data stream contained NUL character

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Data stream contained NUL character Description of the problem NUL characters (bytes with value 0) are not allowed in email messages and should not be transmitted over POP3, SMTP or IMAP4 except in certain circumstances. If an attachment contains such a byte it must be encoded using

Forwarded Emails Not Arriving

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Forwarded Emails Not Arriving If you are having problems having VPOP3 forward incoming messages to an external address, but sending messages directly to that address works OK, and forwarding internal messages to that address works OK, then the problem may be the SMTP return address which VPOP3 is using.

Handling mail for multiple incoming domains

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Handling mail for multiple incoming domains VPOP3 can easily handle mail for several incoming domains. Exactly how you do it depends on the exact situation. All domains are 'aliases' If the domains are aliases of each other, for instance, you have 'mycompany.com' and 'mycompany.org', both of which are the same, so each address at mycompany.com also exists at mycompany.org, and the emails go to the same people regardless of which domain is used, then you simply configure the domains in the ma…

Incoming SMTP Feed

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Incoming SMTP Feed An incoming SMTP feed is where incoming mail is sent directly to your mail server without going through your ISP's POP3 mail server on the way. Advantages An incoming SMTP feed has several advantages over going via a POP3 mailbox:

Installation checklist

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Installation checklist This list contains some things you may want to check before or after installing VPOP3 to make sure it's not going to encounter any common issues. Before installation * Make sure that VPOP3 is not installed on a RAID 5 or RAID 6 array.

Not Working As Expected

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Not Working As Expected This is the page to come to if you think you've set something up correctly but it isn't doing what you think it should be doing. If you're getting an error message or some other concrete indication that something has actually 'gone wrong' then the

Out of Disk Space When Sending Mail

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Out of Disk Space When Sending Mail The first thing you should do is check that there is enough free disk space on the disk where VPOP3 is installed. VPOP3 requires a certain amount of free space before it will allow new messages to be sent, so the disk might not be totally full, but VPOP3 will still report that there is insufficient disk space when you try to send a new message. This buffer zone is designed to help prevent the disk totally filling up, which can cause lots of bigger problems!

Outgoing Mail

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Outgoing Mail * Create a Mail Sender * Route MX Sent (Direct) Outbound Mail Through Your ISP's Relay Server * ISP needs SSL connection * ISP needs you to connect on port 587 * ISP needs SMTP Authentication * ISP Needs POP3 Before SMTP Authentication * Limit size of sent mail * Require SMTP Authentication when users send mail to VPOP3 * Sending different users' mail through different ISP relay accounts * Restricting number of messages sent (per hour etc) * Restricting numbe…

How to configure Outlook 2007

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to configure Outlook 2007 Email SMTP Authentication To set up SMTP authentication in Outlook 2007, if your VPOP3 requires it, go to Tools -> Account Settings, select your email account and press Change.... Then, press the More Settings... button

How to configure Outlook 2010

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to configure Outlook 2010 In many ways, configuring Outlook 2010 is a similar to configuring Outlook 2007. The biggest difference you are likely to notice is the new “Ribbon” interface, in place of the traditional menu bar (File, Edit, View, etc.) Email

Problems sending messages to spam@

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Problems sending messages to spam@ If a VPOP3 user forwards a message to spam@, then the VPOP3 spam filter will train itself that that message was spam. If, when you forward the message, you get an error message like: Subject: Mail Delivery Failure Delivery Failure Report. The following message was incorrectly addressed. Recipient: "spam" is unrecognised.

Restore a single user's mailbox or folder in v3 or v4

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Restore a single user's mailbox or folder in v3 or v4 To restore a single user's Mailbox or folder is currently only possible in VPOP3 Enterprise, and requires a second PC to act as a temporary VPOP3 server. You need to: * Restore your latest VPOP3 backup to another PC (a temporary VPOP3 server)

Sender Domain Must Resolve

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Sender Domain Must Resolve If you receive an 'SMTP Client Error' something like: 451 (user@domain.com) Sender Domain Must Resolve this means that the ISP's mail server cannot find the domain.com part of the email address. Often this means that the FROM address of the message is invalid, or that the

SMTP Rules

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTP Rules Download rules are applied to messages which arrive at VPOP3 using SMTP - either locally sent messages, or incoming messages received through an SMTP mail feed. To configure the rules, go to the VPOP3 settings, then Services -> SMTP Service

Timeout problems downloading/uploading messages with attachments

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Timeout problems downloading/uploading messages with attachments There are various possible reasons for this, usually to do with third party internet security software but they may also be associated with Windows TCP/IP or dial-up adapter issues. You may not have problems with other software, but that doesn't mean the problem is being caused by VPOP3.

"Too many logins" error message

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

"Too many logins" error message VPOP3 version 4 and later have a limit on the number of concurrent logins which can be received for a single user or from a single IP address. This is to prevent a single user from bringing the server down. The current default limits are 20 per user, or 1000 per IP address (to allow multiple people sharing a NAT IP address)

Troubleshooting Tips

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Troubleshooting Tips Telnet One of the most basic, and useful, tools for troubleshooting email systems is a Telnet client. Installing Telnet Client Unfortunately, since Windows XP, Microsoft do not install the Telnet client into Windows by default, so you may need to install the Telnet client yourself.

v3/4 - Move the message store to a new folder/drive

Anonymous (anonymous@undisclosed.example.com) — 2018-12-05T15:25:24+00:00

v3/4 - Move the message store to a new folder/drive This guide assumes you want to just move the VPOP3 message store/database to a new folder on the same PC, and leave the VPOP3 installation directory where it is. * Stop VPOP3 * Stop PostgreSQL

v5 - Move the message store to a new folder/drive

Anonymous (anonymous@undisclosed.example.com) — 2019-11-12T16:10:42+00:00

v5 - Move the message store to a new folder/drive Here is an alternative method, which may be simpler, but only moves the data, not the whole database store (which is a subtle difference) This guide assumes you want to just move the VPOP3 message store/database to a new folder on the same PC, and leave the VPOP3 installation directory where it is.

SMTP Relay Protection in VPOP3

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTP Relay Protection in VPOP3 SMTP Relay Protection should be used on ALL SMTP mail servers (such as VPOP3) which have a permanent connection to the Internet. You may also want to use it on servers which are only connected occasionally via a dial-up connection.

AutoresponderInfo Replacement

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

AutoresponderInfo Replacement Use: ~autoresponderinfo~ Required parameter: responderid - the ID of the autoresponder This returns a JSON structure containing the details of the specified autoresponder. The return structure is an object containing:

UserRuleActions Replacement

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

UserRuleActions Replacement Use: ~userruleactions~ ~end~ Required parameter: RuleId This returns the message rule actions for the specified rule The format string can have the replacements * id - numeric ID of the action * type - action type

Autoresponder Commands

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Autoresponder Commands This article only applies to VPOP3 v4 and earlier A VPOP3 autoresponder can contain special text strings to create special behaviour, in addition to plain text as part of the response. There are three types of 'command' *

Error Handling Scripting

Anonymous (anonymous@undisclosed.example.com) — 2023-11-20T10:18:01+00:00

Error Handling Scripting For most error messages that VPOP3 generates, it allows control of error messages, eg to limit the frequency of error messages if they would be generated repeatedly. These limits are set in Settings -> Admin Settings -> Message Control. However, if you want more granular control, you can use Lua scripting for more fine-grained control

Settings -> Global Address Book

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Settings -> Global Address Book The VPOP3 global address book allows users to access a shared address book from any email client which supports the 'LDAP' protocol (most modern email clients do, but they may call it 'directory service' Importing Entries

IMAP4 -> Advanced tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

IMAP4 -> Advanced tab This page is reached from Services -> IMAP4 Server, then the Advanced tab. Here are some advanced options for the IMAP4 service in VPOP3 Fake access to inaccessible mailboxes In the IMAP4 service you may have folders which do not exist. For instance, if you are accessing a shared Inbox folder from a user called 'Karen', then their folder will be called

LAN Forwarding Queue Status

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

LAN Forwarding Queue Status To view the LAN Forwarding Queue Status, go to Settings -> Local Mail -> LAN Forwarding -> Queue Status The LAN Forwarding Queue shows the messages which VPOP3 has currently got queued to be sent to another mail server on your network using SMTP. The LAN Forwarding Queue status page shows a simple list of the messages waiting to be sent. The four columns in the table show:

Mail tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Mail tab The Mail tab within VPOP3 webmail enables you to manage your sent and received messages. As you can see from the screenshot, the page is divided into three main sections: Menu bar General tab bar Status bar [Mail tab - VPOP3 Version 5 Webmail] Page structure Mail toolbar The Mail toolbar contains the following buttons:

Message Headers

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Message Headers This article describes some of the headers which VPOP3 can add to messages. Note that some of these may be added by customisable scripts used by VPOP3, so may not match exactly, but the descriptions below are for the defaults distributed with VPOP3.

Send Admin Message

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Send Admin Message It is possible for administrator users to send a bulk email message to an entire group or list. To begin composing an email, go to the Administration Settings -> Users page, and click Send Admin Message. This should then open a window, which allows you to specify various options.

Spam Filter Rules

Anonymous (anonymous@undisclosed.example.com) — 2023-01-18T15:57:13+00:00

Spam Filter Rules VPOP3 Versions 2.1.7 and later have a built-in spam filter system which supports a simple script language optimised for content- and spam-filtering of email messages. This reference contains a definition of the spam filtering script language supported by VPOP3. Note that as later versions of VPOP3 are released, more language features may be added, so this reference indicates in which version of VPOP3 a particular feature was added.

Temporary Files

Anonymous (anonymous@undisclosed.example.com) — 2026-05-13T14:03:39+00:00

Temporary Files This is for files in the VPOP3\_temp folder Most of the filename is the hexadecimal timestamp (in Windows 'FILETIME'/65536 form) with a 4 digit hex sequential number afterwards. The first letter or two (usually G-Z) can tell something about what caused the file.

User Manager Script

Anonymous (anonymous@undisclosed.example.com) — 2026-05-29T13:47:01+00:00

User Manager Script If you want people to be able to log in using a different username than their VPOP3 username (eg if you want them to be able to log in using an email address), then you can use the UserManager Lua script The Lua script is managed through the Settings → Scripts page in VPOP3 v8.0 and later and is called 'UserManager.LUA'

User Routing Options

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

User Routing Options Assistant The assistant for a user is an email address (or set of email addresses, separated by semicolons) where incoming messages to this user will be copied or redirected. Normally messages will be copied to the assistant, but if the

VPOP3.GetMessages Lua function

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

VPOP3.GetMessages Lua function The Lua management function 'VPOP3.GetMessages' retrieves a table containing all the mail messages in a specified folder. VPOP3.GetFolders(username, folder); * username is the username from VPOP3.GetUsers * folder is the folder from VPOP3.GetFolders It returns a table where the key is the message UID and the value is a table of:

VPOP3 Wiki

Anonymous (anonymous@undisclosed.example.com) — 2022-10-01T11:36:44+00:00

VPOP3 Wiki Welcome to the VPOP3 Wiki. Here you will find VPOP3 documentation, FAQs and “How To” articles * FAQs * How Tos / Troubleshooting * Reference * Tips & Tricks If you want to add information, hints & tips, etc, you can register on this Wiki and modify or create new pages. Please don't ask questions on the Wiki; if you have a question, ask it on

OutMsgRecipients Replacement

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

OutMsgRecipients Replacement Use: [~outmsgrecipients~] Required parameter: MsgID This returns a JSON array containing details on the recipients for the specified message in the VPOP3 out queue. There is one object returned per recipient, and the object is:

Frequently Asked Questions

Anonymous (anonymous@undisclosed.example.com) — 2026-03-18T20:51:33+00:00

Frequently Asked Questions Pre-Sales Questions * What is the difference between VPOP3 Basic/Standard and VPOP3 Enterprise? * Do I have to pay VAT? * Will I receive a VAT invoice? * What are the limitations of the Home User licence Sales Questions * How can I place an order? * Can I add two licences together? * I got a copy of VPOP3 via Trialpay and would like a refund General * How do I get support? * VPOP3 Roadmap * What do I do if I have lost my VPOP3 licence details?…

Hosted Exchange Service

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Hosted Exchange Service We can provide a Hosted Exchange Service if you requirements mean that you need to have an Exchange Server. For most users, a hosted Exchange server is more complicated, more expensive and more limiting that having your own VPOP3 server or a dedicated hosted VPOP3 server, but some people require features that only Exchange can provide, such as shared calendars where the company policy restricts you to using Microsoft Outlook as the email client.

How can I download old versions of VPOP3?

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How can I download old versions of VPOP3? You can download old versions of VPOP3 by going to the VPOP3 downloads page on our website and clicking on the “download previous versions” link near the top of the page Note that old versions of VPOP3 may no longer be supported under our free email support

What are the limitations of the Home User licence

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

What are the limitations of the Home User licence The VPOP3 Home User licence allows you to have up to 5 users for a lower price than the standard 5 user licence, but there are some restrictions in functionality. These are described below: * There is no Mailing List Server (you can still have distribution lists)

What is Webmail?

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

What is Webmail? “Webmail” is a term used to describe an email client which is accessed through a web page rather than as a standalone program. Some well known services which offer webmail are services such as Hotmail, Yahoo, Gmail etc. All versions of VPOP3 have a Webmail service included as standard.

Will I receive a VAT invoice?

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Will I receive a VAT invoice? We always send out VAT invoices for all purchases. These are sent as PDF files by email within a few days after your purchase. You can also access the invoices on our website, by logging into our website using your login details. vat invoice

535 Authentication Failed

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

535 Authentication Failed This is an SMTP error meaning that an attempt to authenticate has failed. If this error is appearing when the email client is trying to log into VPOP3, then you can check the VPOP3 'SECURITY.LOG' file which may contain more information, such as an invalid password, unknown username, etc. (This information is not returned in the SMTP session because it would help an attacker).

552 5.2.3 Message too large - contact your administrator

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

552 5.2.3 Message too large - contact your administrator Or 552 5.2.3 Message exceeds fixed maximum message size If this error message is coming from VPOP3 when you are sending a message, it means that the message you are sending is prohibited by your VPOP3 settings. There are two places where the size limit could be set.

Socket Error 10054 - The virtual circuit was reset by the remote end

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Socket Error 10054 - The virtual circuit was reset by the remote end Error 10054 means that the connection between VPOP3 and a remote computer (eg the ISP or another computer on your LAN) was disconnected by something outside of VPOP3. This is often caused by anti-virus software or Internet security/firewall on the VPOP3 machine but it could be any of a number of things. Any software or hardware that is sitting between VPOP3 and the ISP could be the root cause.

Socket Error 10503 - No More Data

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Socket Error 10503 - No More Data Error 10503 means that the connection between VPOP3 and a remote computer (normally your ISP) was dropped at an unexpected time. This is different from the error 10054 in that this is a controlled line drop. One way this can happen is if the ISP's POP3 server uses an obsolete standard which allows it to drop the connection if a POP3 'LIST' command is performed on an empty mailbox. The current standard requires that the connection is not dropped until the clien…

How to automatically forward spam to the PSCS spamtrap

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to automatically forward spam to the PSCS spamtrap Spam filter companies use “spamtraps” to catch samples of spam for analysis so filters can be updated. We do this here as well. Most types of spam are already caught by our spam traps, however sometimes people get lots of spam which gets through the filter because their particular type of spam does not currently get sent to our spam traps.

Calendars in Mozilla Thunderbird

Anonymous (anonymous@undisclosed.example.com) — 2022-01-26T10:47:35+00:00

Calendars in Mozilla Thunderbird The Thunderbird email client supports CalDAV calendars as standard. This can be used to access VPOP3's CalDAV server. To add a VPOP3 CalDAV calendar to Mozilla Thunderbirdis straightforward * Add the calendar to Thunderbird

Calendars

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Calendars To use the calendar facility in VPOP3 you need a CalDAV aware client. We have tested it with the free Mozilla Sunbird & Lightning products as well as the emClient email client. These products need a URL to be able to access the CalDAV data store. Once you have the URL (see below), copy it into the

Changing a user's password

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Changing a user's password To change a user's password in VPOP3, you should log into the VPOP3 settings, go to the 'Users' page, then double-click on the user whose password you want to change. This will bring up a window giving you access to the user's settings. Go to the 'Passwords' tab where you can set the passwords.

Configure SRS

Anonymous (anonymous@undisclosed.example.com) — 2025-08-18T15:28:11+00:00

Configure SRS In VPOP3 8.8 and later, you can use Lua scripting to implement 'SRS' (Sender Rewriting Scheme') in VPOP3 This involves adding a couple of functions to rewrite outgoing return paths in 'relayout.lua' or 'mxout.lua' as appropriate and a couple of functions to redirect rewritten bounce message recipients in 'smtpsvr.lua'

Copy Outgoing mail

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Copy Outgoing mail Sometimes people need to copy outgoing mail for various reasons. There are several ways of doing this in VPOP3 depending on your exact requirements: * Message Monitoring - this copies all outgoing, incoming and/or internal mail sent by/to specific users to another specific user

Custom filtering incoming mail

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Custom filtering incoming mail If you want to filter incoming mail using custom rules there are a few ways of doing this, depending on your exact requirements. * Download rules - if your incoming mail is via POP3 collection, you want to filter on headers, size etc (not contents)

How to download VPOP3

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to download VPOP3 To download VPOP3 go to www.pscs.co.uk and click on Download/Try underneath VPOP3 Email Server (1) If you are wanting to download a previous version of VPOP3, click on the download previous versions link (2) Full Downloads If you are wanting to download the current version of VPOP3, click on the appropriate link (3).

Emptying a user's mailbox

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Emptying a user's mailbox To empty a user's 'Inbox' folder, go to the VPOP3 settings. Then click on the Users tab at the top to go to the user list. In the user's list there will be a column displaying the number of messages in the user's Inbox folder. Just to the right of that will be an icon of a waste bin. If you click on that, you will delete all the messages in the user's Inbox folder.

How to configure Encore 32 Estate Agent Software

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to configure Encore 32 Estate Agent Software * Close down the Encore software * Open up the “Maintenance 32” program * Click on “Email Configuration” * Enter the IP address of the VPOP3 computer into the “SMTP Server address”

-ERR Mailbox Locked error

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

-ERR Mailbox Locked error If your email client displays an '-ERR Mailbox Locked' or '-ERR [IN-USE] Mailbox Locked' error when trying to log into VPOP3 it means that the mailbox is locked. The POP3 standard requires that POP3 mailboxes have an 'exclusive lock' on them when they are in use. This means that only one POP3 client can access the mailbox at once. Also, if a POP3 mailbox is currently accessing a mailbox, then no IMAP4, Webmail or administrator access is allowed to the mailbox at the s…

Exceptions

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Exceptions An exception happens if VPOP3 encounters a problem it did not expect. In some cases it can recover automatically, but in other cases that isn't possible. Common causes VPOP3 2.6 and earlier In VPOP3 2.6 and earlier it was quite common for there to be database corruption problems with the SQLite database which was used in those versions.

How to filter attachments

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to filter attachments VPOP3 can filter attachments in several ways. The most general is to use the Settings -> Attachment Processing -> Filtering tab as described below. VPOP3 can also filter attachments using the content/spam filter, or by using an integrated virus scanner.

How to 'share' domains between Exchange and VPOP3

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to 'share' domains between Exchange and VPOP3 If you want to have a VPOP3 server and Exchange Server using the same email domain, then you need to ensure that Exchange does not think it is 'authoritative' for the domain in question. See for details of how to do this in Exchange 2000 and 2003 (a similar process may be used in later versions of Exchange - contact your Microsoft Support technician if you need more help).

We installed a new router and now nothing works

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

We installed a new router and now nothing works If you installed a new router on your network and left it at the default settings, you may find that VPOP3 doesn't seem to work afterwards. This is because it may be that the new router allocates new IP addresses on your network.

How to limit size of sent mail

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to limit size of sent mail There are several ways to limit the size of mail which can be sent * Limit the size of mail accepted by the SMTP component of VPOP3 * Limit the size sent for a particular user * Limit size based on 'rules' * Limit size based on

Message Downloads Not Completing

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Message Downloads Not Completing The normal reason for message downloads not completing is that a third-party antivirus program is scanning the messages and getting stuck at some point. We recommend that the first thing you do is to temporarily disable the email scanning part of any antivirus program or Internet Security software on the VPOP3 computer (other than those integrated fully with VPOP3 - i.e. 'avast! for VPOP3' or 'Sophos SAV Interface'). Usually that will solve the problem.

MX Send Warning - .....

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

MX Send Warning - ..... If you see the text 'MX Send Warning - ' in the VPOP3 status monitor, that means that VPOP3 is trying to send a message to another mail server using the MX send method (direct to the recipient's mail server) and

Outbound Messages Not Appearing in Monitor Target Mailbox

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Outbound Messages Not Appearing in Monitor Target Mailbox For VPOP3 to monitor outbound messages it needs to be able to work out that the message is FROM: a user whose mail should be monitored. To do this it has to examine the FROM: address in the message header.

How to configure Outlook 2003

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to configure Outlook 2003 Email (to be completed) Address Book To configure Outlook to use the VPOP3 global address book, go to Tools -> E-Mail Accounts in Outlook Then choose Add a new directory or address book and press Next Choose Internet Directory Service (LDAP)

Outlook behaviour when deleting messages from IMAP4

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Outlook behaviour when deleting messages from IMAP4 When you delete a message in Outlook it marks the message as deleted (putting a line through it). You have to 'purge' the mailbox to actually delete the message. See this Microsoft article for more information on this.

Outlook not able to connect to VPOP3 Enterprise v6.8 when using SSL/TLS

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Outlook not able to connect to VPOP3 Enterprise v6.8 when using SSL/TLS In VPOP3 6.8 SSL v2 is disabled by default (it is considered to be insecure). SSL v3 was released in 1996 and SSL v2 was deprecated because of the well known security flaws. However, it seems that Microsoft Outlook (up to at least Outlook 2010) will not connect to VPOP3 using SSL if VPOP3's SSL v2 is disabled.

Outlook / Outlook Express is sending mail repeatedly

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Outlook / Outlook Express is sending mail repeatedly If you are using Outlook or Outlook Express you may occasionally find that mail is being sent repeatedly. There are a couple of possible reasons for this which we know of Sending taking too long

PostgreSQL server won't start due to damaged log files

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

PostgreSQL server won't start due to damaged log files If the PostgreSQL server won't start at all, because its transaction logs are damaged, you will probably need to recreate the database store totally. To rebuild the database: * Open a command prompt and find the VPOP\pgsql folder

Redirect message for a user if a sender is a particular email address

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Redirect message for a user if a sender is a particular email address Say you want messages addressed to 'user1' to be redirected to 'user2' if they came from customer@domain.com This is an unusual requirement, so there is no way to do it in VPOP3.

Restore selected mail folders or mailbox in VPOP3 v5 or later

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Restore selected mail folders or mailbox in VPOP3 v5 or later (This option is only available in VPOP3 Enterprise) First - if the problem is that messages were deleted very recently (the default is within 3 days), you can probably use the Undelete feature in VPOP3.

Router Problem error messages

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Router Problem error messages If you get an error message to the VPOP3 administrator with subject Router Problem and text Local Distribute to Failed Error: Database Error "ERROR: could not open file "base//": Permission denied"

Seeing where a message came from

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Seeing where a message came from Sometimes you need to check to see where a message really came from. The 'From:' email address is easily forged, so that cannot be relied upon. The first thing you have to do is to get the full message headers. These may look daunting, but are very useful for problem diagnosis.

Setup steps for multiple POP3 accounts at the ISP

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Setup steps for multiple POP3 accounts at the ISP * Set up all the local users you need in the 'Users' page in the VPOP3 settings. The usernames & passwords do not have to have any relation to the ISP's accounts. These are the details which the users will put in their email clients (eg Outlook) to collect their mail from VPOP3.

How to start VPOP3

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to start VPOP3 There are two ways to start VPOP3 * as a service * as a normal application For normal operation, you will start VPOP3 as a service, as this means that VPOP3 will run even when no one is logged into the PC. To help with some types of problem diagnosis it can be better to start it as an application. This makes VPOP3 run in the account of the currently logged in user, rather than the service account, so it can eliminate access permission problems. Also, when VPOP3 starts a…

How to stop VPOP3

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to stop VPOP3 You can stop VPOP3 by going to the Services applet in Windows, find the VPOP3 Email Server service and stop it, or, if you have the VPOP3 status monitor running with appropriate permissions, you can right-click that and choose 'Shutdown Server'

Undelete Messages in VPOP3 Enterprise v5 or later

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Undelete Messages in VPOP3 Enterprise v5 or later If a user accidentally deletes messages or a message folder, you can easily undelete this within a few days. The amount of time that messages are stored in the VPOP3 'recycle bin' is set in Settings

Use Download Rules for incoming POP3 message filtering

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Use Download Rules for incoming POP3 message filtering If you have VPOP3 retrieving messages from a POP3 account on an ISP, then you can use Download Rules to do basic filtering on incoming messages. (If you have incoming SMTP, then use SMTP Rules instead) Download rules cannot perform all mail filtering tasks. For more features,

How to use the VPOP3 Status Monitor

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to use the VPOP3 Status Monitor The VPOP3 Status Monitor is a small program which displays a postbox icon (usually red) in the Windows notification area (usually at the bottom right of the screen - by the clock). This icon can be used for quick access to various VPOP3 facilities. Note that the Status Monitor is

User Administration

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

User Administration * Add a User * Delete a User * Changing a user's password * Remove user from Everyone List * Configure Email Signatures

How To Move VPOP3 Version 2 to a New PC

Anonymous (anonymous@undisclosed.example.com) — 2019-11-12T16:06:44+00:00

How To Move VPOP3 Version 2 to a New PC (Also applies to version 1.x) To move VPOP3 to a new PC you should go through the following steps: * Copy the VPOP3 files * Copy the VPOP3 directory and subdirectories from the old PC to the new PC. (If you are moving to Windows Vista/2008/7/2012/8 or later, do NOT copy the files to a 'Program Files' folder on the new PC. Recent versions of Windows have special protection for those folders, which is not compatible with VPOP3)

How to move VPOP3 V3 to a new folder

Anonymous (anonymous@undisclosed.example.com) — 2018-12-05T15:25:41+00:00

How to move VPOP3 V3 to a new folder This guide assumes you want to move the whole of VPOP3 (including the message store) to a new folder on the same PC * Stop VPOP3 * Stop PostgreSQL * Remove the PostgreSQL service * Move VPOP3 to the new folder

How to move VPOP3 V5+ to a new folder

Anonymous (anonymous@undisclosed.example.com) — 2021-03-19T16:01:48+00:00

How to move VPOP3 V5+ to a new folder This guide assumes you want to move the whole of VPOP3 (including the message store) to a new folder on the same PC * Stop VPOP3 * Stop VPOP3DB * Remove the VPOP3DB service * Move VPOP3 to the new folder

VPOP3 2.x crashes when user tries to download mail

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

VPOP3 2.x crashes when user tries to download mail If VPOP3 2.x crashes when a user tries to download mail, there are a few possible causes we know of: * A virus scanner or Internet security software is interfering with the connection between VPOP3 and the email client and is either terminating VPOP3 deliberately, or is blocking VPOP3 causing another part of it to crash

How To Setup VPOP3 Service Security

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How To Setup VPOP3 Service Security VPOP3 can be configured to restrict access to its various services depending on the client computer's IP address. This is useful if you want to allow access from only certain IP addresses (eg within your LAN) and prevent access from other IP addresses (eg the Internet).

Error message: VPOP3 Alert - Non-existent user -

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Error message: VPOP3 Alert - Non-existent user - If you receive an error message like: Subject: VPOP3 Alert - Non-existent user - Delivery Failure Report. There was incoming mail for non-existent user "". This means that VPOP3 downloaded a message using POP3 and it was addressed to an email address which does not exist.

VPOP3 Historical Logger Backlog

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

VPOP3 Historical Logger Backlog This problem is primarily related to VPOP3 versions 2.5 -> 2.6. Theoretically it could happen on later versions, but would be extremely unusual (see the note at the bottom if you are using version 3.0 or later) You get an error message with subject

VPOP3 re-downloading old messages from the ISP POP3 server

Anonymous (anonymous@undisclosed.example.com) — 2026-01-05T09:31:47+00:00

VPOP3 re-downloading old messages from the ISP POP3 server If you tell VPOP3's POP3 mail collector to leave messages on the ISP's server for a few days, you may find that sometimes VPOP3 will redownload all the messages from the ISP mailbox again.

When sending mail, VPOP3 adds 'PRVS=...' to the sender address

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

When sending mail, VPOP3 adds 'PRVS=...' to the sender address This is because VPOP3 version 5 and later support BATV. BATV helps to eliminate 'backscatter spam', where someone else sends spam pretending to be from you, and then you receive all the bounce messages from those messages. BATV encodes the sender address in a special way so that VPOP3 can detect that a bounce message is in response to a message that you actually sent.

How to write your own spam filter rules

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to write your own spam filter rules VPOP3's spam filter uses a basic scripting language designed for filtering email messages, so a full description of writing your own rules would be very long and complex, as it is really something that only a programmer should do.

About

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

About The VPOP3 'About' page lets you see the version and build number of your VPOP3 installation, along with any licence details, and supplier details (if any) Licence Information The Licence Information section shows your current licence information

Settings -> Admin Settings

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Settings -> Admin Settings The Admin Settings page allows you to perform three key functions: * * * Choosing a Main Administrator The Main Administrator receives notification emails, such as daily reports and errors/problems which may require manual intervention.

Archive Script

Anonymous (anonymous@undisclosed.example.com) — 2023-03-25T23:33:31+00:00

Archive Script (from VPOP3 v6 onwards) Archive scripting lets you indicate whether full message content should be stored in the message archive. This could be used, for instance, for filtering out messages containing credit card details. The message headers will still be archived, along with the explanation text returned by the script.

Attachment Extraction Scripting

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Attachment Extraction Scripting This is the 'extraction.lua' script. (Added in V6.17) This script has one functions: * Extract This functions is called if the attachment extraction is enabled in Settings -> Attachment Processing -> Extraction.

Database files used in VPOP3 2.x

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Database files used in VPOP3 2.x VPOP3 2.x usually uses SQLite 2.8.3 as its database engine. This stores databases in discrete *.db files in the VPOP3\_database directory on the server PC. We do not recommend that you access these databases directly unless you know what you are doing, and we strongly discourage the alteration of data in the databases directly unless technical support request you to.

Database -> Restore Tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Database -> Restore Tab This tab is only in VPOP3 Enterprise (v5 and later), and is for performing a partial (mailbox/mail folder) restore of the database. To do a full restore of the database, or for VPOP3 Basic/Standard, see the “Restore a Backup of VPOP3” topic Using the

Database query to get all lists and members

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Database query to get all lists and members At a command prompt in the VPOP3 directory run psql (The password is 'vpop3pass') Then, type \copy (select l.name, address from users.listmembers m inner join users.lists l on m.list=l.id) to 'c:/temp/x.csv' csv header;

IMAP4 Server Scripting

Anonymous (anonymous@undisclosed.example.com) — 2026-05-26T16:46:24+00:00

IMAP4 Server Scripting (Added in V6.12) DoCapability function When the IMAP4 CAPABILITY command is received, VPOP3 generates a capability string based on settings, then calls DoCapability(ipaddr, capabilities) * ipaddr = IP address of the client computer

Settings -> Local Mail -> General

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Settings -> Local Mail -> General The Local Mail -> General page allows you to configure a few simple, but fundamentally important settings. Default Domain In the majority† of cases, this is the domain name that VPOP3 will use when sending automated messages; for instance, users may receive a message from

LogDB.Recipients table

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

LogDB.Recipients table The LogDB.Recipients table contains a record of the recipients for messages logged by VPOP3. A message may have one or more recipients Columns * rcptid - this is a bigint sequential value which identifies the recipient uniquely in the database

LogDB.Sessions table

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

LogDB.Sessions table The LogDB.Sessions table contains a record of all 'sessions' logged by VPOP3. A session is something like a POP3 server session as an email client downloads messages, or an SMTP client session as VPOP3 sends a message out to the Internet, and so on.

Logging

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Logging Activity Summary Reports You can tell VPOP3 to send you a daily summary report each day. To do this check the box to say Send daily summary logs to, and choose the appropriate user (or “Main Administrator” if you want the reports to be sent to the

POP3 Client Lua Scripting

Anonymous (anonymous@undisclosed.example.com) — 2023-08-16T07:48:01+00:00

POP3 Client Lua Scripting The POP3 Client Lua Script is called POP3CLT.LUA and is edited in Settings -> Scripts. This script is called whenever VPOP3 runs a POP3 session to download messages from a remote POP3 server. VPOP3 will call the following Lua functions in the script at the following times:

Lua SMTP MX Control

Anonymous (anonymous@undisclosed.example.com) — 2026-02-24T15:49:48+00:00

Lua SMTP MX Control Every time VPOP3 is going to send messages using direct MX sending, it runs a script called mxout.lua which can be created/edited in Settings -> Scripts (or in the VPOP3 directory in VPOP3 v6.6 or earlier). Global Variables Starting with v8.8, the following global variables are defined:

Message Archive

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Message Archive The Message Archive facility is for VPOP3 to store copies of all messages sent or received. It stores the messages in a central archive store which can be searched by an administrator. The prime purpose of the archive facility is for recording messages in case of possible disputes, as you can see what was sent/received by email. It can also be used as a backup/restore facility in an emergency, but that is not its prime purpose, so it is better to have a proper

Misc -> General Tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Misc -> General Tab VPOP3 Host Name The VPOP3 Host Name is used by VPOP3 when it is telling other mail software what it is called. For instance, when it connects to another SMTP server it will send the host name as the parameter for the HELO or EHLO command, and when an SMTP client connects to VPOP3, it announces its name in the welcome banner as required by the SMTP standard.

New message tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

New message tab The New message tab within VPOP3 webmail is where you prepare, edit and send messages, including replies and forwards. As you can see from the screenshot, the page is divided into two main sections: Menu bar General tab bar Status bar [New message tab - VPOP3 Version 5 Webmail] Page structure New message toolbar

Outgoing Message Scripting

Anonymous (anonymous@undisclosed.example.com) — 2024-03-21T10:49:54+00:00

Outgoing Message Scripting Every time VPOP3 adds a message to the Outgoing mail queue, it runs a script called outmessage.lua. Scripts are stored as files in the VPOP3 directory in VPOP3 v6.6 and earlier, or managed through the Settings -> Scripts page in VPOP3 v6.7 and later.

POP3 Server

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

POP3 Server This page lets you configure the POP3 server component of VPOP3. This is how users collect mail from VPOP3 using a POP3 email client. In VPOP3 Enterprise, you can create multiple POP3 servers with different settings for instance, to allow SSL connections for local users using the older

Mail Sender Advanced Settings

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Mail Sender Advanced Settings Mail Connectors -> Mail Senders -> (name) -> Advanced Advanced Domain Filtering For VPOP3 v6.11 and later, see the Domain Filtering section of the user manual. The Domain Filtering box lets you restrict which email messages are sent via this Mail Sender. You specify each rule on a separate line, and the message will be sent if it matches any sender rule

Services

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Services This page lets you see and manage the services which VPOP3 provides for other programs, such as email clients. These are how users communicate with VPOP3. * General * POP3 Server * SMTP Server * IMAP4 Server (VPOP3 Enterprise Only) * Password Server * Finger Server * LDAP Server * WebMail Server * Status Server * NNTP Server

SMTP Service -> VRFY/EXPN Tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTP Service -> VRFY/EXPN Tab Services -> SMTP Server -> VRFY/EXPN Tab VRFY and EXPN are SMTP commands which allow another computer to verify email addresses without sending mail to them. See RFC 5321 for technical details. Usually, these commands should be disabled for security purposes, but some other software may be able to use these commands for various reasons. In this case, you can enable them, but restrict access to the IP address(es) you trust.

Spamfilter Rule Weights

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spamfilter Rule Weights To edit the spamfilter rule weights, go to Settings -> Spamfilter -> General -> Rule Weights The VPOP3 spamfilter contains several rules which test for certain things, eg 'adult words', or entries in real-time blacklist databases, or whitelisted email addresses etc.

Spamfilter Script Configuration tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spamfilter Script Configuration tab You reach this tab by going to Settings --> Spam Filter -> General, and then choose the General tab. The Spamfilter script has various settings that can be changed to alter the behaviour of the spamfilter. These are defined in the script, so may change with different versions of the script. The settings are currently:

Spam Filter Rules: AddNullAddress

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spam Filter Rules: AddNullAddress Statement AddNullAddress Version 2.2.1+ Purpose Temporarily adds an email address to VPOP3's configuration where the mail will be discarded AddNullAddress is intended for use to make 'pseudo' addresses, such as 'spam@' and 'notspam@' for the spam filter to process.

Spam Filter Rules: ForEach

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spam Filter Rules: ForEach Statement ForEach Version 2.1.7+ Purpose Causes a loop to be run through for all values within specified criteria The ForEach statement requires either two or three parameters (depending on the type of loop that is being conducted), in the format

Spam Filter Rules: IfLocalAddress

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spam Filter Rules: IfLocalAddress Statement IfLocalAddress Version 2.2.1+ Purpose Allows you to check if a specified email address is local to your VPOP3 installation IfLocalAddress requires just one paramater; the address, in the format IfLocalAddress

Spam Filter Rules: Redirect

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spam Filter Rules: Redirect Statement Redirect Version 2.1.7+ Purpose Remove all original recipients, and send the message to the specified recipient (and optionally folder) Examples To redirect the message to the Postmaster user's inbox Redirect Postmaster

Status

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Status The VPOP3 Status screen has two tabs * Server Status * Sessions Server Status The Server Status tab is essentially a copy of the VPOP3 Status Monitor information. * Connection Status - this shows the 'online' status of VPOP3. If it says idle, it does not mean VPOP3 is not working, or not doing anything, it just means that it is not currently sending or collecting mail from the Internet.

Prune Rules

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Prune Rules The Edit User -> Prune Rules tab can be used to create/edit rules which cause messages to be automatically deleted according to specified criteria. To add or edit a “prune rule”, press the Add Rule button. This will add a new rule to the table, with a set of default settings. Don't worry, this rule doesn't take effect until you press the Submit button.

User Routing Script

Anonymous (anonymous@undisclosed.example.com) — 2023-03-27T10:32:18+00:00

User Routing Script If there is a /user_redirect.lua script, this Lua script can override VPOP3's message routing options. You can edit this either in the Settings -> Scripts page in the settings, or via the 'Routing' tab in the user's settings in the VPOP3 administration console. This script affects how VPOP3 will handle how messages

Users.Autoresponders table

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Users.Autoresponders table The Users.Autoresponders table contains the users' autoresponder definitions Columns * autoresponderid - this is a numeric id of the autoresponder entry (primary key) * owneruser - this is the numeric id of the user which the autoresponder belongs to (or 0 for a 'template' autoresponder)

What's new in version 5 webmail?

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

What's new in version 5 webmail? This is a list of some of the most noticeable changes to VPOP3's webmail interface for version 5. For a more detailed list of changes, view our bugtracker. [VPOP3 Version 5 - mobile compatible webmail] Mobile compatible webmail If you access version 5 webmail from a mobile device, you will probably be redirected to the mobile compatible version. It is a cut-down version of Webmail, which retains the key features, but doesn't utilise the extra features which w…