PSCS Wiki

Mail Connectors -> Connector Schedule

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Mail Connectors -> Connector Schedule The Connector Schedule tells VPOP3 when to connect to send mail using Mail Senders and collect mail using Mail Collectors. It does not affect incoming SMTP over a permanent connection, or LAN Forwarding. The connection schedule also tells VPOP3 when to check for updates to the

Connections

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Connections In VPOP3 a Connection tells VPOP3 how to 'connect' to the Internet. VPOP3 supports up to 10 Connections, which can be either network connections or Dial-Up connections (using a modem) A Connection is linked to one Mail Sender and zero or more Mail Collectors.

Incoming SMTP Mail

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Incoming SMTP Mail If you have an incoming SMTP mail feed, then the mail server sending mail to you will connect to your VPOP3 computer to send the mail. The mail connection is controlled by the sending computer. IMPORTANT If you have a permanent Internet connection with a static IP address, the usual way of having incoming SMTP is to configure your

Settings -> Diagnostics

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Settings -> Diagnostics The Diagnostics page allows you to enable, configure and disable various methods of diagnostic logging, within VPOP3. Log file overview By default, VPOP3 will keep two copies of most log files: * The current log file, with a

Lua SMTP MX Control

Anonymous (anonymous@undisclosed.example.com) — 2026-02-24T15:49:48+00:00

Lua SMTP MX Control Every time VPOP3 is going to send messages using direct MX sending, it runs a script called mxout.lua which can be created/edited in Settings -> Scripts (or in the VPOP3 directory in VPOP3 v6.6 or earlier). Global Variables Starting with v8.8, the following global variables are defined:

FATAL: connection limit exceeded for non-superusers

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

FATAL: connection limit exceeded for non-superusers This error means that there are too many connections to the PostgreSQL database server. VPOP3 having exclusive use of database If only VPOP3 is using the PostgreSQL database, then you can reduce the number of connections that VPOP3 will make to the database at once. This is set in the VPOP3 settings at

How To Encrypt Sessions

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How To Encrypt Sessions VPOP3 Enterprise 2.6 and later supports SSL/STARTTLS encrypted sessions to VPOP3 itself. So, the email client or web browser will encrypt the data passed to VPOP3 so it cannot be intercepted. This requires an SSL Certificate to be created for VPOP3.

Restricting the number of recipients sent to

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Restricting the number of recipients sent to Some ISPs set restrictions on the number of recipients that you are allowed to send in a certain time period, eg 50 messages per hour, or the number of recipients that you are allowed to send per message or per connection.

Restricting the number of messages sent

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Restricting the number of messages sent Some ISPs set restrictions on the number of messages that you are allowed to send in a certain time period, eg 50 messages per hour, or the number of messages that you are allowed to send per connection. Restriction of messages per connection

SMTP Server -> IDS/IPS

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTP Server -> IDS/IPS The IDS/IPS tab lets you set logging and automatic blocking parameters for the IDS (Intrusion Detection System) and IPS (Intrusion Prevention System) component of the SMTP server. SMTP servers are regularly attacked, both by incoming mail attacks (spam/viruses etc) and relay attacks (by spammers and other malware distributors trying to send mail through them). Because of this, there is a system in VPOP3 which will track attack attempts on the SMTP service and can automat…

Socket Error 10054 - The virtual circuit was reset by the remote end

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Socket Error 10054 - The virtual circuit was reset by the remote end Error 10054 means that the connection between VPOP3 and a remote computer (eg the ISP or another computer on your LAN) was disconnected by something outside of VPOP3. This is often caused by anti-virus software or Internet security/firewall on the VPOP3 machine but it could be any of a number of things. Any software or hardware that is sitting between VPOP3 and the ISP could be the root cause.

SMTP Server Lua Scripting

Anonymous (anonymous@undisclosed.example.com) — 2025-05-08T08:23:35+00:00

SMTP Server Lua Scripting The SMTP Server Lua Script is called SMTPSVR.LUA and can be edited from the Settings -> Scripts page in the VPOP3 settings. This script is called whenever an instance of the VPOP3 SMTP server is launched - ie whenever someone opens a connection to port 25 on the VPOP3 server to send it a message, whether from a local user or an incoming SMTP message.

How to Create a Connection

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to Create a Connection There are two ways that VPOP3 can be configured to connect to the Internet. Which one you use depends on the service provided by your ISP. Using a Permanent 'Always On' Connection This is the most common connection method. It assumes you are connecting to the Internet via a router which is permanently connected. In this scenario VPOP3 simply needs to connect to the router so setting up VPOP3 is very simple.

How to use the VPOP3 Status Monitor

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to use the VPOP3 Status Monitor The VPOP3 Status Monitor is a small program which displays a postbox icon (usually red) in the Windows notification area (usually at the bottom right of the screen - by the clock). This icon can be used for quick access to various VPOP3 facilities. Note that the Status Monitor is

Socket Error 10060 - Operation Timed Out

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Socket Error 10060 - Operation Timed Out This error is quite self explanatory. It means that Windows reported that a connection attempt or idle connection timed out. If this error occurs during a connection attempt (eg in a VPOP3 - SMTP Client connection problem error message), then it means that Windows couldn't connect to the ISP mail server within a fixed time (the timeout limit is fixed within Windows itself). This problem can either mean that your ISP is having a problem, that you are con…

Incoming SMTP Feed

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Incoming SMTP Feed An incoming SMTP feed is where incoming mail is sent directly to your mail server without going through your ISP's POP3 mail server on the way. Advantages An incoming SMTP feed has several advantages over going via a POP3 mailbox:

Mail Collectors

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Mail Collectors A Mail Collector is how you tell VPOP3 to collect incoming mail. Each Mail Collector is associated with one or more Connections. The VPOP3 Connector Schedule determines when each Connection is run. Mail Collector General Tab Each Mail Collector has a General

Socket Error 10503 - No More Data

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Socket Error 10503 - No More Data Error 10503 means that the connection between VPOP3 and a remote computer (normally your ISP) was dropped at an unexpected time. This is different from the error 10054 in that this is a controlled line drop. One way this can happen is if the ISP's POP3 server uses an obsolete standard which allows it to drop the connection if a POP3 'LIST' command is performed on an empty mailbox. The current standard requires that the connection is not dropped until the clien…

Remote Access to VPOP3 without a permanent Internet connection

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Remote Access to VPOP3 without a permanent Internet connection If you do not have a permanent connection to the Internet, then the user will need to dial directly into the VPOP3 computer or another computer on the network. This only works reliably if the dial-inserver is running Windows NT, Windows 2000 or later versions.

IMAP4 -> Advanced tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

IMAP4 -> Advanced tab This page is reached from Services -> IMAP4 Server, then the Advanced tab. Here are some advanced options for the IMAP4 service in VPOP3 Fake access to inaccessible mailboxes In the IMAP4 service you may have folders which do not exist. For instance, if you are accessing a shared Inbox folder from a user called 'Karen', then their folder will be called

Mail Connectors -> Mail Senders -> SMTP Direct

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Mail Connectors -> Mail Senders -> SMTP Direct VPOP3 can be configured to send mail directly to the recipient's mail server (or the recipient's mail service provider). Usually this is only used if you have a high-end business class Internet connection - such as a leased line, or your mail server is co-located in a data centre. Attempts to use SMTP Direct sending on a dial-up/ADSL/Cable/FTTC/etc connection may be problematic since the receiving mail server may think you a home user who has been …

421 4.3.2 VPOP3 Too many connections from your IP address - try later

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

421 4.3.2 VPOP3 Too many connections from your IP address - try later If you see this error message when you are sending messages, then it means that VPOP3 has detected too many simultaneous connections from your IP address. This would usually happen if the sender is another mail server as they can make many simultaneous connections when there are lots of messages to send. The error code that VPOP3 gives means that the sender should try sending the messages later, so it should be possible to e…

VPOP3 - POP3 Client Problem

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

VPOP3 - POP3 Client Problem These errors occur whilst VPOP3 is communicating with your ISP's POP3 mail server to retrieve your mail. The server connection was closed unexpectedly If the message text is Error with Pop3 Client (XXXX (YY)) The server connection was closed unexpectedly

SMTP Relay Protection in VPOP3

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTP Relay Protection in VPOP3 SMTP Relay Protection should be used on ALL SMTP mail servers (such as VPOP3) which have a permanent connection to the Internet. You may also want to use it on servers which are only connected occasionally via a dial-up connection.

Bandwidth Control

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Bandwidth Control (VPOP3 Enterprise Only) Every time a connection is made to a VPOP3 service, or a user logs into a service, VPOP3 Enterprise runs a Lua function which can assign the connection a bandwidth pool, or assign a bandwidth limit on the connection.

Lua SMTP Relay Control

Anonymous (anonymous@undisclosed.example.com) — 2025-08-14T09:24:55+00:00

Lua SMTP Relay Control Every time VPOP3 is going to send messages via SMTP Relay, it runs a script called relayout.lua in the VPOP3 directory. Global Variables This script may have global variables, depending on your version of VPOP3. In VPOP3 3.0.0L and later, there are two read-only global variables set at the start of the script:

Status

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Status The VPOP3 Status screen has two tabs * Server Status * Sessions Server Status The Server Status tab is essentially a copy of the VPOP3 Status Monitor information. * Connection Status - this shows the 'online' status of VPOP3. If it says idle, it does not mean VPOP3 is not working, or not doing anything, it just means that it is not currently sending or collecting mail from the Internet.

Socket Error 10053 - An established connection was aborted by the software in your host machine.

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Socket Error 10053 - An established connection was aborted by the software in your host machine. Error 10053 means that an established connection has been dropped. There are three descriptions of this error message we know about, but the descriptions are given by Windows, so they may vary depending on your version of Windows:

Socket Error 10055 - No Buffer Space Available

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Socket Error 10055 - No Buffer Space Available Error 10055 means that Windows has run out of TCP/IP socket buffers because too many connections are open at once. Things to check if this happens are: * Is there any other TCP/IP software running on the same PC as VPOP3 - eg a proxy server

Error Messages

Anonymous (anonymous@undisclosed.example.com) — 2025-10-06T15:21:37+00:00

Error Messages This is the place to look if you are trying to trouble shoot a problem and you have received or have access to a specific error message or error code. If instead your problem is that something you think is set up correctly is not working then the best place to look would be the

Initial Configuration Tasks

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Initial Configuration Tasks After installing VPOP3, you will need to get into the VPOP3 settings. The easiest way of doing this is to find the VPOP3 Status Monitor in the Windows task tray. Right-click this icon, and choose 'VPOP3 Settings'. (If that doesn't work, see this article to troubleshoot Status Monitor problems). Alternatively, on the VPOP3 PC, you can go to Start

ISP needs SSL connection

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

ISP needs SSL connection A few ISPs use a non-standard and not recommended system of encrypting connections to their SMTP mail servers. These generally are called 'SSL' connections and work on an alternate port other than the standard SMTP port 25. (The correct way to encrypt connections is to use a system called TLS which works on the standard SMTP port).

Setup steps for multiple POP3 accounts at the ISP

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Setup steps for multiple POP3 accounts at the ISP * Set up all the local users you need in the 'Users' page in the VPOP3 settings. The usernames & passwords do not have to have any relation to the ISP's accounts. These are the details which the users will put in their email clients (eg Outlook) to collect their mail from VPOP3.

VPOP3 - SMTP Client Problem

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

VPOP3 - SMTP Client Problem These errors occur whilst VPOP3 is communicating with your ISP's SMTP mail server to send your mail. If the message text is: Error with SMTP Client (XXXX (YY)) The server connection was closed unexpectedly Then this means that the the connection between VPOP3 and your ISP's SMTP mail server was closed when VPOP3 did not expect it to be. This can be caused by the network connection failing or a bug in the ISP's mail server which drops the connection in abnormal circ…

IMAP4 Server Scripting

Anonymous (anonymous@undisclosed.example.com) — 2025-06-23T10:51:46+00:00

IMAP4 Server Scripting (Added in V6.12) DoCapability function When the IMAP4 CAPABILITY command is received, VPOP3 generates a capability string based on settings, then calls DoCapability(ipaddr, capabilities) * ipaddr = IP address of the client computer

Lua SMTP MX Server Rules

Anonymous (anonymous@undisclosed.example.com) — 2026-02-24T15:50:03+00:00

Lua SMTP MX Server Rules Every time VPOP3 checks for remote MX server for sending messages using direct MX sending, it runs a script called mxserverrules.lua which can be created/edited in Settings -> Scripts (or in the VPOP3 directory in VPOP3 v6.6 or earlier).

POP3 Mail Collection

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

POP3 Mail Collection POP3 Mail Collection is when VPOP3 will collect mail from an external POP3 mailbox - for instance, from an Internet Provider. POP3 General This page tells VPOP3 how to collect mail. * POP3 Server Address - this is the name (or IP address) of the POP3 server from which you want VPOP3 to collect mail

Mail Sender Advanced Settings

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Mail Sender Advanced Settings Mail Connectors -> Mail Senders -> (name) -> Advanced Advanced Domain Filtering For VPOP3 v6.11 and later, see the Domain Filtering section of the user manual. The Domain Filtering box lets you restrict which email messages are sent via this Mail Sender. You specify each rule on a separate line, and the message will be sent if it matches any sender rule

SMTP -> General tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTP -> General tab This page is reached from Services -> SMTP Server, then the General tab. This page lets you set general settings for the SMTP service component of VPOP3. The SMTP service is how users send outgoing mail, and how incoming SMTP messages arrive. Service Name

Status Monitor (port 5109) protocol

Anonymous (anonymous@undisclosed.example.com) — 2019-08-19T08:58:45+00:00

Status Monitor (port 5109) protocol This page documents the protocol used between VPOP3 and the Status Monitor. It's not intended for any other purpose, so it's a bit limited, but in certain cases you may find this useful Login Before the Status Monitor receives any updates or can issue commands it must log in using a user's credentials.

Encryption

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Encryption There are several different encryption methods used on the Internet which are relevant to VPOP3. Current versions of VPOP3 Basic will be able to connect to other POP3 or SMTP servers using either SSL or TLS. This allows you to use VPOP3 to access services such as GMail which require SSL/TLS.

Accepting Incoming SMTP through a router

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Accepting Incoming SMTP through a router If your ISP is providing you with an SMTP mail feed (incoming SMTP) and you have VPOP3 connecting to the ISP through a router then you will probably need to modify the router configuration to allow this. Most routers' default configuration will only allow outbound connections (ie connections from the local network out to the Internet). If you need to accept incoming SMTP mail, then you need to tell the router to allow inbound connections on port 25 for …

How to delete a Mail Collector or Connection

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to delete a Mail Collector or Connection To delete a Mail Collector or Connection in version 3, click on the little waste-bin icon at the left of the green bar on the Mail Collector or Connection settings page. We have made this more obvious in version 4, by including a bigger

VPOP3 - POP3 Client Connection Problem

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

VPOP3 - POP3 Client Connection Problem These errors occur during the period when VPOP3 is trying to establish a connection to your ISP's POP3 mail server to receive incoming mail. They can mean that you have entered the POP3 Server address incorrectly, or that there is a problem with the network, or that your ISP's mail server is not working properly.

VPOP3 - SMTP Client Connection Problem

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

VPOP3 - SMTP Client Connection Problem These errors occur during the period when VPOP3 is trying to establish a connection to your ISP's SMTP mail server to send outgoing mail. They can mean that you have entered the SMTP Server address incorrectly, or that there is a problem with the network, or that your ISP's mail server is not working properly.

Database -> Restore Tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Database -> Restore Tab This tab is only in VPOP3 Enterprise (v5 and later), and is for performing a partial (mailbox/mail folder) restore of the database. To do a full restore of the database, or for VPOP3 Basic/Standard, see the “Restore a Backup of VPOP3” topic Using the

Database schema used in VPOP3 5.x

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Database schema used in VPOP3 5.x Note that all information in this section is subject to change. We do not guarantee that the database schema will remain constant, even between minor upgrade versions, so use this information at your own risk. Do not alter the database schema used by VPOP3 (including indexes, triggers & functions) or your whole VPOP3 data store may collapse.

LAN Forwarding

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

LAN Forwarding LAN Forwarding is a feature of VPOP3 where it can send messages to another mail server using SMTP. This other mail server is usually on your local network (LAN), hence the name, but it can actually be anywhere that has a permanent network connection to VPOP3. VPOP3 will send messages using

Mail Connectors -> Mail Senders

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Mail Connectors -> Mail Senders The Mail Sender tells VPOP3 how to send mail out to the Internet. If you want to send mail for specific users to another specific mail server (e.g. a local Microsoft Exchange Server or another VPOP3 server) then use the

SMTP Service -> Advanced Tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTP Service -> Advanced Tab Services -> SMTP Server -> Advanced Tab Refuse SMTP Connections from This setting should be rarely needed, and should be normally left blank. It is here for historic purposes. If you put some text in this box, then VPOP3 will refuse any SMTP connections from clients whose 'HELO'/'EHLO' command data contains the text specified here as a substring. Eg, if this setting is set to '.myisp.com', then VPOP3 would refuse SMTP connections from any client which sends the c…

Socket Error 10061 - The attempt to connect was forcefully rejected

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Socket Error 10061 - The attempt to connect was forcefully rejected Error 10061 means that the computer which VPOP3 was trying to connect to (probably at your ISP) refused the connection from the computer running VPOP3. There are several possibilities that can cause error 10061:

Allow Remote Access to VPOP3 Mailboxes

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Allow Remote Access to VPOP3 Mailboxes Sometimes people want to be able to access their office VPOP3 mail server from a remote site or mobile phone etc. These instructions assume you have a permanent Internet connection (eg ADSL, Cable etc). If you don't have a permanent Internet connection, see

How to create a Mail Sender

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to create a Mail Sender In VPOP3 a Mail Sender tells VPOP3 how to send mail out to another mail server, usually for sending mail across the Internet. To create a mail sender, go to the VPOP3 Settings, then Mail Connectors. In the Mail Senders section on the left, choose

Data stream contained NUL character

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Data stream contained NUL character Description of the problem NUL characters (bytes with value 0) are not allowed in email messages and should not be transmitted over POP3, SMTP or IMAP4 except in certain circumstances. If an attachment contains such a byte it must be encoded using

-ERR Can't open the message file - it's gone!

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

-ERR Can't open the message file - it's gone! If VPOP3 receives the error message “-ERR Can't open the message file - it's gone!” from your ISP's POP3 server when it is downloading messages, this is a symptom of a fundamental bug in your ISP's POP3 server.

Find the IP address of the VPOP3 Computer

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Find the IP address of the VPOP3 Computer To find the IP address of the VPOP3 computer, in Windows go to Control Panel -> Network and Sharing Center. Press the Local Area Connection link Then press 'Details'. Look for the 'IPv4 Address' setting.

Incoming Mail

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Incoming Mail Incoming mail is configured through Mail Collectors (on Mail Connectors -> Mail Collectors) * Create a Mail Collector * Delete a Mail Collector or Connection * Handling mail for multiple incoming domains * Custom filtering incoming mail

Install VPOP3 using external PostgreSQL database

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Install VPOP3 using external PostgreSQL database (VPOP3 version 5 or later) In some cases, advanced users may wish to have VPOP3 use an external PostgreSQL database instead of the one installed with VPOP3. This is possible by telling VPOP3 the connection details during installation.

The ISP needs POP3 before SMTP authentication

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

The ISP needs POP3 before SMTP authentication Some ISPs (especially in Germany) require you to log on to collect your POP3 mail before they will allow you to send any mail through their SMTP relay servers. VPOP3 actually connects to the POP3 server and SMTP server at the same time, so usually it will not have successfully logged onto the ISP's POP3 server before it tries to start sending mail.

Timeout problems downloading/uploading messages with attachments

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Timeout problems downloading/uploading messages with attachments There are various possible reasons for this, usually to do with third party internet security software but they may also be associated with Windows TCP/IP or dial-up adapter issues. You may not have problems with other software, but that doesn't mean the problem is being caused by VPOP3.

Using VPOP3 with Microsoft Exchange Server

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Using VPOP3 with Microsoft Exchange Server You can link VPOP3 to Exchange Server, so that Exchange Server sends outgoing mail through VPOP3 and VPOP3 sends any incoming mail directly to Exchange Server. You should first of all set up VPOP3 to send and receive Internet email as described in the online help.

Error message: Your connection has been blocked temporarily - Try again later

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Error message: Your connection has been blocked temporarily - Try again later If you get an error message in your email client software saying Your connection has been blocked temporarily - Try again later or Server access temporarily blocked! Please try again later

Settings -> Database

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Settings -> Database The Settings -> Database page lets you configure the use of the back-end database which VPOP3 uses for configuration data, message storage and other uses. Tabs * Backups * Query * Connection * Message Store * Restore

POP3 Server -> General Tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

POP3 Server -> General Tab Services -> POP3 Server -> General tab This page sets the general settings for the POP3 service component in VPOP3. The POP3 service is how users collect their email from VPOP3 using a POP3 email client Service Name The Service Name is a name you give the service for your reference. It is only used in administrative displays and logging, so the name doesn't matter. Most people leave it at the default.

POP3 Server

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

POP3 Server This page lets you configure the POP3 server component of VPOP3. This is how users collect mail from VPOP3 using a POP3 email client. In VPOP3 Enterprise, you can create multiple POP3 servers with different settings for instance, to allow SSL connections for local users using the older

Mail Connectors -> Mail Senders -> SMTP Relay

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Mail Connectors -> Mail Senders -> SMTP Relay VPOP3 can be configured to send through an SMTP Relay server (sometimes known as a smarthost). This is the usual configuration for small/medium sized businesses and home users. If you have a dial-up, ADSL, Cable, FTTC etc connection, then your Internet Provider will normally give you access to their SMTP relay service.

SMTP Server

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTP Server This page lets you configure the SMTP server component of VPOP3. This is how users send mail (either outgoing or internal), and also how VPOP3 receives incoming SMTP messages. In VPOP3 Enterprise, you can create multiple SMTP servers with different settings for instance, to allow SSL connections for local users using the older

Spam Filter Rules: HTTPGet

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spam Filter Rules: HTTPGet Statement HTTPGet Version 2.3.7+ Purpose Enables the script to retrieve a web page The HTTPGet statement requires a url, headers variable name and content variable name, in the format HTTPGet

OutMsgRecipients Replacement

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

OutMsgRecipients Replacement Use: [~outmsgrecipients~] Required parameter: MsgID This returns a JSON array containing details on the recipients for the specified message in the VPOP3 out queue. There is one object returned per recipient, and the object is:

What are the limitations of the Home User licence

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

What are the limitations of the Home User licence The VPOP3 Home User licence allows you to have up to 5 users for a lower price than the standard 5 user licence, but there are some restrictions in functionality. These are described below: * There is no Mailing List Server (you can still have distribution lists)

450 4.3.2 Content Filter Timeout

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

450 4.3.2 Content Filter Timeout If you get this error appearing when messages are sent to VPOP3, either in a bounce message, or in the VPOP3 status monitor, it means that the VPOP3 computer filter is taking more than the allowed amount of time (usually 60 seconds).

550 5.7.1 Relaying not allowed! Bad sender IP address

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

550 5.7.1 Relaying not allowed! Bad sender IP address This SMTP error message means that the computer which is sending the message is not permitted to send outgoing messages based on the VPOP3 SMTP Service's Access Restrictions. This is probably because someone is trying to send messages from outside your local network, and you have not configured VPOP3 to allow this. You have to be careful when allowing this, because you may configure VPOP3 to be an open-relay, which is a

550/553 Not Permitted error from BT Internet's mail servers

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

550/553 Not Permitted error from BT Internet's mail servers BT Internet's mail servers only allow messages to be sent from 'approved' email addresses. If you try to send messages from other addresses BT's mail servers may return a '550 Not Permitted' error, a '553' error, or may silently discard the message depending on what their server feels like doing today.

How To Allow Mail Relay Through VPOP3

Anonymous (anonymous@undisclosed.example.com) — 2025-05-21T07:57:18+00:00

How To Allow Mail Relay Through VPOP3 If you are allowing remote access into VPOP3 to collect mail then you may also want those remote users to be able to send their outgoing mail through VPOP3 as well. This is more complex than allowing users to collect mail, because, by default, SMTP connections are not authenticated. This means that when someone tries to send a message through VPOP3, VPOP3 doesn't know who that user is. This can cause a problem if unauthorised users try to send mail through…

Backscatter

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Backscatter In email, “backscatter” is the term used if you send bounce messages back to spam messages. As most spam messages use forged email addresses, then the bounce messages will go to an innocent person, who will find them very annoying. Stopping VPOP3 from sending Backscatter

C++ Error Popup

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

C++ Error Popup If VPOP3 crashes with a C++ error popup window, that means that an 'exception' has been thrown - something unusual has happened, and VPOP3 doesn't know how to recover automatically. Often these are due to database errors. There are two places you can look for the cause of the error:

Database Maintenance

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Database Maintenance VPOP3 uses the PostgreSQL database server for most of its data storage. Normally this will not require any special maintenance, because it will manage itself. To do any special database maintenance you will need to close down VPOP3 first, because PostgreSQL needs exclusive access to the database to perform any operations such as decreasing the size of database files. Note that these operations may take some time! There are some PostgreSQL utility programs in the VPOP3\pgs…

Error message after sending RCPTTO: - error 0 - text 550 5.7.1 Relaying not allowed! Bad sender IP address

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Error message after sending RCPTTO: - error 0 - text 550 5.7.1 Relaying not allowed! Bad sender IP address If you get this error message from within Webmail, then it usually means that the SMTP service access restrictions are blocking Webmail from sending mail.

Error Message Handling

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Error Message Handling VPOP3 will normally send an error message to the Main Administrator every time it encounters an error. We recommend you leave it like this in most cases - if an error message occurs repeatedly, then it usually means there's an underlying problem which needs resolving rather than ignoring.

"How To" Articles

Anonymous (anonymous@undisclosed.example.com) — 2026-03-18T20:20:50+00:00

"How To" Articles Installation/Upgrades * Download VPOP3 * Install VPOP3 * Move VPOP3 * Upgrade VPOP3 * Upgrade VPOP3 to version 5.x or 6.x from version 4 or earlier * Upgrade VPOP3 to version 7.x from version 6 or earlier * Upgrade VPOP3 to version 8.x from version 7 or earlier * Upgrade VPOP3 to version 9 or later from version 7 or 8 * Performance Requirements * Installation Checklist General Configuration * Initial Configuration * Users * Add an Alias * Create…

Locked Accounts

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Locked Accounts VPOP3 has a security feature which will lock out an account after it has had several failed login attempts. This feature is to make it harder for an attacker to use a brute force or dictionary password attack on an account. The default settings are that after more than 3 attempts to log into an account with an incorrect password, VPOP3 will lock the account for 30 minutes. You can change these settings on the

Mail Not Downloading From ISP

Anonymous (anonymous@undisclosed.example.com) — 2026-04-06T17:59:47+00:00

Mail Not Downloading From ISP This normally happens because you have told VPOP3 to Leave Messages On Server (on the Mail Connectors -> Mail Collectors -> (name) -> POP3 General tab). If you do this, VPOP3 will leave messages on the ISP's mail server for several days, and remember that it has already downloaded them. Then, the next time it connects it will see that there are some messages waiting, but it may find that it has already downloaded them, so it won't download them again.

How to make VPOP3 re-download POP3 messages from the ISP

Anonymous (anonymous@undisclosed.example.com) — 2026-04-06T17:57:00+00:00

How to make VPOP3 re-download POP3 messages from the ISP If you have the VPOP3 Mail Collector setting Leave Mail On Server enabled, then VPOP3 will leave your messages on the ISP POP3 server for the specified number of days after downloading it. If, during this time, you want to make VPOP3 download those messages again, then you can do so.

Many instances of Postgres.exe are running

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Many instances of Postgres.exe are running If you are running VPOP3 3.0 or later, and look in the 'Processes' list in Windows TaskManager you will probably see multiple instances of postgres.exe running. This is perfectly normal, and does not indicate a problem. The PostgreSQL database works by having a separate instance of postgres.exe for each connection to the database (as well as a few extra for management and house keeping). This behaviour is documented on the

Message Downloads Not Completing

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Message Downloads Not Completing The normal reason for message downloads not completing is that a third-party antivirus program is scanning the messages and getting stuck at some point. We recommend that the first thing you do is to temporarily disable the email scanning part of any antivirus program or Internet Security software on the VPOP3 computer (other than those integrated fully with VPOP3 - i.e. 'avast! for VPOP3' or 'Sophos SAV Interface'). Usually that will solve the problem.

Outgoing Mail

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Outgoing Mail * Create a Mail Sender * Route MX Sent (Direct) Outbound Mail Through Your ISP's Relay Server * ISP needs SSL connection * ISP needs you to connect on port 587 * ISP needs SMTP Authentication * ISP Needs POP3 Before SMTP Authentication * Limit size of sent mail * Require SMTP Authentication when users send mail to VPOP3 * Sending different users' mail through different ISP relay accounts * Restricting number of messages sent (per hour etc) * Restricting numbe…

How to configure Outlook 2007

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to configure Outlook 2007 Email SMTP Authentication To set up SMTP authentication in Outlook 2007, if your VPOP3 requires it, go to Tools -> Account Settings, select your email account and press Change.... Then, press the More Settings... button

How to configure Outlook 2010

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How to configure Outlook 2010 In many ways, configuring Outlook 2010 is a similar to configuring Outlook 2007. The biggest difference you are likely to notice is the new “Ribbon” interface, in place of the traditional menu bar (File, Edit, View, etc.) Email

Problems accessing VPOP3 Settings

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Problems accessing VPOP3 Settings If you have problems accessing the VPOP3 settings: * Go to Start -> Programs -> VPOP3 -> Configure VPOP3 on the VPOP3 computer. That should open up a web browser and take you to the login page * If VPOP3 doesn't show the login page, and shows a '403' error page instead, that means that the access restrictions for the WebMail service have been restricted so that this computer cannot access the WebMail service.

Some PCs cannot access VPOP3 when VPOP3 is connected to the Internet

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Some PCs cannot access VPOP3 when VPOP3 is connected to the Internet This error happens when you have multiple TCP/IP subnets on your network. The computers which are on different subnets from the VPOP3 computer will not be able to see VPOP3 whilst VPOP3 is connected to the Internet (through a dial-up connection). Whenever VPOP3 is offline, it will work correctly.

Troubleshooting Tips

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Troubleshooting Tips Telnet One of the most basic, and useful, tools for troubleshooting email systems is a Telnet client. Installing Telnet Client Unfortunately, since Windows XP, Microsoft do not install the Telnet client into Windows by default, so you may need to install the Telnet client yourself.

Using a Mobile Phone with VPOP3

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Using a Mobile Phone with VPOP3 Many people want to use a mobile phone to send/receive their email nowadays. This is usually easy to do with VPOP3. The recommended way is to have the phone connect directly to VPOP3 for sending/receiving email. To do this, you need to do three things:

VPOP3 2.x crashes when user tries to download mail

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

VPOP3 2.x crashes when user tries to download mail If VPOP3 2.x crashes when a user tries to download mail, there are a few possible causes we know of: * A virus scanner or Internet security software is interfering with the connection between VPOP3 and the email client and is either terminating VPOP3 deliberately, or is blocking VPOP3 causing another part of it to crash

How To Setup VPOP3 Service Security

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

How To Setup VPOP3 Service Security VPOP3 can be configured to restrict access to its various services depending on the client computer's IP address. This is useful if you want to allow access from only certain IP addresses (eg within your LAN) and prevent access from other IP addresses (eg the Internet).

VPOP3 cannot access PostgreSQL - timeout expired

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

VPOP3 cannot access PostgreSQL - timeout expired This is an error which may be logged in the Windows event log It is event 4547 from the source 'VPOP3' If the event message DLL is not correctly installed it may display as: The description for Event ID ( 4547 ) in Source ( VPOP3 ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this desc…

Settings -> Admin Settings

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Settings -> Admin Settings The Admin Settings page allows you to perform three key functions: * * * Choosing a Main Administrator The Main Administrator receives notification emails, such as daily reports and errors/problems which may require manual intervention.

Database files used in VPOP3 2.x

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Database files used in VPOP3 2.x VPOP3 2.x usually uses SQLite 2.8.3 as its database engine. This stores databases in discrete *.db files in the VPOP3\_database directory on the server PC. We do not recommend that you access these databases directly unless you know what you are doing, and we strongly discourage the alteration of data in the databases directly unless technical support request you to.

Error Handling Scripting

Anonymous (anonymous@undisclosed.example.com) — 2023-11-20T10:18:01+00:00

Error Handling Scripting For most error messages that VPOP3 generates, it allows control of error messages, eg to limit the frequency of error messages if they would be generated repeatedly. These limits are set in Settings -> Admin Settings -> Message Control. However, if you want more granular control, you can use Lua scripting for more fine-grained control

Mail Connectors

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Mail Connectors Mail Connectors tell VPOP3 how to send and receive mail from the outside world, or other mail servers. This page lets you set: * Connections - how VPOP3 connects to the outside world * Mail Collectors - how VPOP3 collects mail from remote mail servers *

Misc -> DNS Tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Misc -> DNS Tab Settings -> Misc Settings -> DNS The DNS tab lets you specify which DNS servers VPOP3 will use. DNS (Domain Name System) is a system which converts Internet host names (eg www.google.com) into a numeric IP address (eg 1.2.3.4), because all connections on the Internet are actually performed using numeric IP addresses, but it is easier for people to remember names.

Security Settings -> Intrusion Protection Tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Security Settings -> Intrusion Protection Tab Settings -> Security Settings -> Intrusion Protection Tab Starting in VPOP3 v6.0, VPOP3 can monitor failed logins for all accounts across all services and block an attacker's IP address from accessing VPOP3 for a specified time

SMTP Direct Sender Settings

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTP Direct Sender Settings Mail Connectors -> Mail Senders -> SMTP Direct Sender -> Settings tab The SMTP Direct Settings tab lets you set how VPOP3 will send mail using SMTP Direct DNS Servers to Use This setting tells VPOP3 the IP addresses of the DNS servers it should use to find the recipients' mail servers. Separate multiple addresses with commas.

SMTP Service - Filtering

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTP Service - Filtering The SMTP Server -> Filtering tab lets you set up filtering of messages going through the VPOP3 SMTP service. This may be incoming SMTP messages, or locally sent messages. SMTP Rules SMTP Rules let you create custom rules for processing messages as they go through the VPOP3 SMTP service.

SMTP -> Load Limiting tab

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

SMTP -> Load Limiting tab This page is reached from Services -> SMTP Server, then the Load Limiting tab. Here you can set limits on how many active SMTP sessions there are, and other related settings. This lets you limit the load on the VPOP3 server. This is especially important if VPOP3 is performing spam filtering on incoming SMTP messages, because the spam filter can add considerable load. You can reduce the spamfilter load by using the

Lua SMTP Rules Scripts

Anonymous (anonymous@undisclosed.example.com) — 2026-03-26T11:41:59+00:00

Lua SMTP Rules Scripts When VPOP3 is processing SMTP Rules for messages received by SMTP, it runs a script called smtprules_(x).lua, where (x) is replaced by the numeric ID of the SMTP service VPOP3 processes SMTP Rules at least three times for each message - once when MAIL FROM has been received, once for each RCPT TO, and once when the whole message data has been received.

Spam Filter Rules: WinHTTPGet

Anonymous (anonymous@undisclosed.example.com) — 2018-11-14T10:45:49+00:00

Spam Filter Rules: WinHTTPGet Statement WinHTTPGet Version 2.4.9+ Purpose Enables the script to retrieve a web page using the WinINET functionality The WinHTTPGet statement requires a url, headers variable name and content variable name, in the format