https://wiki.pscs.co.uk/ 2026-05-05T15:28:47+00:00 https://wiki.pscs.co.uk/ https://wiki.pscs.co.uk/_media/wiki:dokuwiki.svg text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:misc_advanced?rev=1542192349&do=diff Misc -> Advanced Tab Settings -> Misc Settings -> Advanced You will normally not need to change any settings on this page unless VPOP3 technical support have suggested it. If you do make changes, and want to go back to the original settings, the Restore Defaults button will restore the settings to their defaults. text/html 2025-10-14T15:43:01+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/faq:gdpr_hosted_vpop3?rev=1760456581&do=diff GDPR for hosted VPOP3 service (Since Brexit, the UK has “UK GDPR” instead of “EU GDPR”, so this document refers to UK GDPR) Also see GDPR for VPOP3 as most of that applies to the VPOP3 hosting service as well. This Data Processing Agreement is part of our hosted VPOP3 service terms. You can view the revision history by clicking on the 'clock' icon to the right. text/html 2021-06-29T08:35:43+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/faq:smtp_relay_service?rev=1624955743&do=diff SMTP Relay Service FAQ We provide an SMTP Relay Service for many of our customers. The price starts from £40 (+VAT if applicable) per year, for up to 5000 messages, or 750MB, per month. How do I order the SMTP Relay Service? To order the SMTP relay service, either email text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:whitelist_blacklist?rev=1542192349&do=diff Spamfilter Whitelist & Blacklist The VPOP3 spamfilter has a whitelist and a blacklist for sender addresses. It also has a whitelist and blacklist for words/phrases. You can view these lists in the VPOP3 settings by going to Settings -> Spamfilter -> text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:connections?rev=1542192349&do=diff Connections In VPOP3 a Connection tells VPOP3 how to 'connect' to the Internet. VPOP3 supports up to 10 Connections, which can be either network connections or Dial-Up connections (using a modem) A Connection is linked to one Mail Sender and zero or more Mail Collectors. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:smtp_advanced?rev=1542192349&do=diff SMTP Service -> Advanced Tab Services -> SMTP Server -> Advanced Tab Refuse SMTP Connections from This setting should be rarely needed, and should be normally left blank. It is here for historic purposes. If you put some text in this box, then VPOP3 will refuse any SMTP connections from clients whose 'HELO'/'EHLO' command data contains the text specified here as a substring. Eg, if this setting is set to '.myisp.com', then VPOP3 would refuse SMTP connections from any client which sends the c… text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:spamrules_db_comparator?rev=1542192349&do=diff Spamfilter database comparators Several Spamfilter DB statements allow comparators which are listed below If the value specified in the statement is numeric: * = or == compare numeric values for equality * <> or != compare numeric values for inequality text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:spamrules_statement_ifmatch?rev=1542192349&do=diff Spam Filter Rules: IfMatch Statement IfMatch Version 2.1.7+ Purpose Allows you to perform a regular or substring match on a variable or part of the message being processed IfMatch statements require a data parameter and a search value, in the format text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/faq:gdpr_other_hosting?rev=1542192349&do=diff GDPR for other hosting services (eg web hosting) As a hosted service provider, we are classed as a “Data Processor” under the GDPR regulations. For our hosting services: * Data is held in the UK. Data is not transmitted outside of the EU except at your explicit request or command. text/html 2024-01-15T11:35:45+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:repairing_corrupted_database?rev=1705318545&do=diff Repairing corrupted database With PostgreSQL (as with most high-end databases) the database system will automatically recover after power failures etc, if it can. If it can't then there is no manual 'repair' function, because the data cannot totally be recovered (or it would automatically have been recovered). text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:vpop3_not_starting_properly?rev=1542192349&do=diff VPOP3 Not Starting Properly If VPOP3 is not starting properly, then the first thing to check is whether the database server is starting. In VPOP3 v3 and later, VPOP3 uses a PostgreSQL Database server for data storage, so if the database server is not running, VPOP3 will not be able to start properly. In this case, the VPOP3.EXE process may appear in Task Manager, but it won't respond to anything, or it may appear in Task Manager and then stop after a short period. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:incoming_smtp?rev=1542192349&do=diff Incoming SMTP Mail If you have an incoming SMTP mail feed, then the mail server sending mail to you will connect to your VPOP3 computer to send the mail. The mail connection is controlled by the sending computer. IMPORTANT If you have a permanent Internet connection with a static IP address, the usual way of having incoming SMTP is to configure your text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:misc_general?rev=1542192349&do=diff Misc -> General Tab VPOP3 Host Name The VPOP3 Host Name is used by VPOP3 when it is telling other mail software what it is called. For instance, when it connects to another SMTP server it will send the host name as the parameter for the HELO or EHLO command, and when an SMTP client connects to VPOP3, it announces its name in the welcome banner as required by the SMTP standard. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:reset_message_folder_counts?rev=1542192349&do=diff Reset Message Folder Counts In extremely rare cases, the mail folder message counts in the database may get out of step with the actual stored messages. There are database triggers which will keep the counts in sync during normal operation, but if you have to manipulate the database directly (eg to recover from a corrupted database) it is possible that they will get out of step. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:user_message_rules?rev=1542192349&do=diff Message Rules The Edit User -> Message Rules tab can be used to create/edit rules which are processed when messages arrive in a User's mailbox. They can be used to copy messages, mark them as read, delete them, etc VPOP3 will process Message Rules in the order they appear in the list. If you want to change the order of the rules, you can drag & drop them into the correct order. Usually when VPOP3 has processed a rule, it will go on to check further rules, but you can use the text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/adminapi:version_5_webadmin_api?rev=1542192349&do=diff Version 5 Web Admin API This section is only relevant for people who may want to access the Administration features from their own scripts, or want to customise the standard administration pages. Note that no free support is available for this. This is not a full list of features, but it will be updated from time to time. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:550_not_permitted?rev=1542192349&do=diff 550/553 Not Permitted error from BT Internet's mail servers BT Internet's mail servers only allow messages to be sent from 'approved' email addresses. If you try to send messages from other addresses BT's mail servers may return a '550 Not Permitted' error, a '553' error, or may silently discard the message depending on what their server feels like doing today. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:delete_outqueue_messages_directly_from_the_database?rev=1542192349&do=diff Delete OutQueue messages directly from the database If there is an extremely large number of messages (eg hundreds of thousands) in the VPOP3 OutQueue, then it may take a very long time for VPOP3 v5 and later to start as it check the message database tables for consistency during initialisation. text/html 2021-03-08T10:48:40+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:install_vpop3?rev=1615200520&do=diff How to Install VPOP3 Simply download VPOP3 from the website, and run the installation program and follow the prompts. Occasionally people may have problems with the PostgreSQL part of the installation. If that happens, please contact us either by email at support@pscs.co.uk or by phone to +44 (0)1484 855800, and we will do our best to help. text/html 2026-04-06T17:59:47+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:mail_not_downloading_from_isp?rev=1775498387&do=diff Mail Not Downloading From ISP This normally happens because you have told VPOP3 to Leave Messages On Server (on the Mail Connectors -> Mail Collectors -> (name) -> POP3 General tab). If you do this, VPOP3 will leave messages on the ISP's mail server for several days, and remember that it has already downloaded them. Then, the next time it connects it will see that there are some messages waiting, but it may find that it has already downloaded them, so it won't download them again. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:non-administrator?rev=1542192349&do=diff Trying to perform administrative tasks without rights This problem can have two symptoms: * When trying to access the VPOP3 settings you get an error “You are trying to perform an VPOP3 administration task while logged in as a non-administrator text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:pop3_client_problem?rev=1542192349&do=diff VPOP3 - POP3 Client Problem These errors occur whilst VPOP3 is communicating with your ISP's POP3 mail server to retrieve your mail. The server connection was closed unexpectedly If the message text is Error with Pop3 Client (XXXX (YY)) The server connection was closed unexpectedly text/html 2019-11-12T16:06:44+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:v2_-_move_to_a_new_pc?rev=1573574804&do=diff How To Move VPOP3 Version 2 to a New PC (Also applies to version 1.x) To move VPOP3 to a new PC you should go through the following steps: * Copy the VPOP3 files * Copy the VPOP3 directory and subdirectories from the old PC to the new PC. (If you are moving to Windows Vista/2008/7/2012/8 or later, do NOT copy the files to a 'Program Files' folder on the new PC. Recent versions of Windows have special protection for those folders, which is not compatible with VPOP3) text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/mailapi:version_5_webmail_api?rev=1542192349&do=diff Version 5 Web Mail API This section is only relevant for people who may want to access the WebMail features from their own scripts, or want to customise the standard Webmail pages. Note that no free support is available for this. This is not a full list of features, but it will be updated from time to time. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:delete_list_member_from_all_lists?rev=1542192349&do=diff Delete list member from all lists You can delete an email address from all VPOP3 distribution & mailing lists. Go to Settings → Database → Query Alternatively, at a command prompt in the VPOP3 directory run psql (The password is 'vpop3pass') text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:imap4_advanced?rev=1542192349&do=diff IMAP4 -> Advanced tab This page is reached from Services -> IMAP4 Server, then the Advanced tab. Here are some advanced options for the IMAP4 service in VPOP3 Fake access to inaccessible mailboxes In the IMAP4 service you may have folders which do not exist. For instance, if you are accessing a shared Inbox folder from a user called 'Karen', then their folder will be called text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:schedule?rev=1542192349&do=diff Mail Connectors -> Connector Schedule The Connector Schedule tells VPOP3 when to connect to send mail using Mail Senders and collect mail using Mail Collectors. It does not affect incoming SMTP over a permanent connection, or LAN Forwarding. The connection schedule also tells VPOP3 when to check for updates to the text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:send_admin_message?rev=1542192349&do=diff Send Admin Message It is possible for administrator users to send a bulk email message to an entire group or list. To begin composing an email, go to the Administration Settings -> Users page, and click Send Admin Message. This should then open a window, which allows you to specify various options. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:smtp_general?rev=1542192349&do=diff SMTP -> General tab This page is reached from Services -> SMTP Server, then the General tab. This page lets you set general settings for the SMTP service component of VPOP3. The SMTP service is how users send outgoing mail, and how incoming SMTP messages arrive. Service Name text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:spamfilter_whitelist?rev=1542192349&do=diff Spamfilter.Whitelist table The Spamfilter.Whitelist table contains the spamfilter whitelist entries which do not contain wildcards or regular expressions. They are separated out to speed up checking. Columns * address - this is the email address in the whitelist text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/adminapi:smtpidsevents?rev=1542192349&do=diff SMTPIDSEvents Replacement Use: ~smtpidsevents~ This returns the latest entries from the SMTP client logging database. It will return 100 entries unless the count parameter is specified in the URL, in which case that will specify the maximum number of entries to return. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/faq:lost_licence_details?rev=1542192349&do=diff Lost Licence Details If you have lost your VPOP3 licence key, we will be able to find it for you, but we do have to make a nominal charge of £5.00 (+ VAT if applicable) to search for it as it is a time consuming task. If you need us to do this search, then email sales@pscs.co.uk. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:calendars_on_em_client?rev=1542192349&do=diff Calendars on eM Client If you have used CalDAV calendars on Mozilla Lightning/Sunbird, then the eM Client configuration is quite different, but simple. To add a CalDAV account to eM Client * Go to Tools -> Accounts * Click New Account... * Open the text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:database_disk_caching?rev=1542192349&do=diff Database & Disk Caching Disk Caching One key point is that, like all other high-end databases, PostgreSQL should not be run on a server with disk level write back caching. With write back caching, the disk will report data as being written to disk when it is still in the disk's cache memory. If the power then fails, this data is lost and can cause database corruption. As long as the database server really knows when the data has been written to disk, power failure will not cause database corru… text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:error_message_handling?rev=1542192349&do=diff Error Message Handling VPOP3 will normally send an error message to the Main Administrator every time it encounters an error. We recommend you leave it like this in most cases - if an error message occurs repeatedly, then it usually means there's an underlying problem which needs resolving rather than ignoring. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:exceptions?rev=1542192349&do=diff Exceptions An exception happens if VPOP3 encounters a problem it did not expect. In some cases it can recover automatically, but in other cases that isn't possible. Common causes VPOP3 2.6 and earlier In VPOP3 2.6 and earlier it was quite common for there to be database corruption problems with the SQLite database which was used in those versions. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:handling_mail_for_multiple_incoming_domains?rev=1542192349&do=diff Handling mail for multiple incoming domains VPOP3 can easily handle mail for several incoming domains. Exactly how you do it depends on the exact situation. All domains are 'aliases' If the domains are aliases of each other, for instance, you have 'mycompany.com' and 'mycompany.org', both of which are the same, so each address at mycompany.com also exists at mycompany.org, and the emails go to the same people regardless of which domain is used, then you simply configure the domains in the ma… text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:ical_on_mac_osx?rev=1542192349&do=diff Configuring iCal on Mac OSX to connect to VPOP3's CalDAV service This requires VPOP3 v6 or later. The following instructions are for Mac OS X v10.7.5 but should work with similar versions. We have not been able to create an account by going to System Preferences text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:installed_new_router_and_now_nothing_works?rev=1542192349&do=diff We installed a new router and now nothing works If you installed a new router on your network and left it at the default settings, you may find that VPOP3 doesn't seem to work afterwards. This is because it may be that the new router allocates new IP addresses on your network. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:no_transport_provider_is_available?rev=1542192349&do=diff Outlook/Windows Messaging reports "No transport provider is available" If Outlook or Windows Messaging reports No transport provider is available when trying to connect to VPOP3, it can mean several things. (This must be a contender for “the world's most meaningless error message text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:obtaining_error_logs?rev=1542192349&do=diff How to Obtain Error Logs As part of diagnosing a support issue our support team may ask you to send them various log files. This page explains how to obtain the right files at the right time. How Logging Works Under its default settings VPOP3 logs a minimal amount of information about what it is doing to various files in the main VPOP3 directory. When investigating a support issue it is often the case that we will need you to switch on logging to extra files or increase the level of detail be… text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:outlook_outlook_express_are_sending_mail_repeatedly?rev=1542192349&do=diff Outlook / Outlook Express is sending mail repeatedly If you are using Outlook or Outlook Express you may occasionally find that mail is being sent repeatedly. There are a couple of possible reasons for this which we know of Sending taking too long text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:seeing_where_a_message_came_from?rev=1542192349&do=diff Seeing where a message came from Sometimes you need to check to see where a message really came from. The 'From:' email address is easily forged, so that cannot be relied upon. The first thing you have to do is to get the full message headers. These may look daunting, but are very useful for problem diagnosis. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:spam_filter_not_working?rev=1542192349&do=diff Spam filter not working If the VPOP3 spam filter appears not to be working at all, the first thing to do is to look at the message headers of an incoming message to see if the spam filter is being run at all. Check to see if a header line beginning with X-VPOP3-Spam text/html 2020-09-03T15:07:34+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:upgrade_vpop3_to_version_8?rev=1599145654&do=diff Upgrading VPOP3 to version 8.x from v7 or earlier VPOP3 v8.x uses PostgreSQL 10 as its database engine, which is the latest supported 32 bit version of PostgreSQL. Later versions of PostgreSQL are 64-bit only, which means we cannot use them while continuing to support 32 bit versions of Windows. text/html 2026-04-21T11:12:40+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:v5_-_move_to_a_new_pc?rev=1776769960&do=diff Move VPOP3 Version 5 (or later) to a new PC Moving VPOP3 Version 5 or later to a new PC is slightly different from moving earlier versions, because of the database system, which was introduced for version 3 and modified for version 5. The summary of steps is: * Stop VPOP3 on the original PC text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:vpop3_access_security?rev=1542192349&do=diff How To Setup VPOP3 Service Security VPOP3 can be configured to restrict access to its various services depending on the client computer's IP address. This is useful if you want to allow access from only certain IP addresses (eg within your LAN) and prevent access from other IP addresses (eg the Internet). text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:vpop3_is_using_a_lot_of_disk_space?rev=1542192349&do=diff VPOP3 is using a lot of disk space If VPOP3 is using a lot of disk space, the problem is usually that there is lots of data there, so it has to use the disk space. Message Storage In VPOP3 version 5 and later, all users' messages are stored in the database, so they will occupy space in the VPOP3\pgsql\data folder. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:what_is_the_best_practice_to_delete_old_messages_from_the_vpop3_archive_folder?rev=1542192349&do=diff What is the best practice to delete old messages from the VPOP3 archive folder? You should use the 'Offline' tab in the VPOP3 Message Archive settings to tell VPOP3 to move old messages into a ZIP file. You can then store this ZIP file somewhere safe in case you need to refer to it in the future. (If you know you won't want to ever refer to these old messages, you could just delete the ZIP file, but storage costs nowadays are so cheap, we'd recommend keeping it, just in case). text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:lists?rev=1542192349&do=diff Lists The Lists section in VPOP3 lets you view and manage the various types of 'List' which VPOP3 supports * Distribution Lists * Mailing Lists * Forwardings * ODBC Mailing Lists * Groups Using a list A list will contain zero or more 'members' (usually email addresses) which can be messaged all at once. To send a message to all the members of a list, you will usually send an email to the listname at a valid domain. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:listserver_settings?rev=1542192349&do=diff ListServer Settings Settings -> ListServer Settings In VPOP3, the ListServer is an automated 'user' which handles mailing list requests, such as subscribe & unsubscribe commands. Anyone can send an email to the ListServer to subscribe to (public) mailing lists, or unsubscribe from mailing lists they are on, or see a list of public mailing lists etc. text/html 2026-02-24T15:49:48+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:lua_smtp_mx_control?rev=1771948188&do=diff Lua SMTP MX Control Every time VPOP3 is going to send messages using direct MX sending, it runs a script called mxout.lua which can be created/edited in Settings -> Scripts (or in the VPOP3 directory in VPOP3 v6.6 or earlier). Global Variables Starting with v8.8, the following global variables are defined: text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:sender_advanced_settings?rev=1542192349&do=diff Mail Sender Advanced Settings Mail Connectors -> Mail Senders -> (name) -> Advanced Advanced Domain Filtering For VPOP3 v6.11 and later, see the Domain Filtering section of the user manual. The Domain Filtering box lets you restrict which email messages are sent via this Mail Sender. You specify each rule on a separate line, and the message will be sent if it matches any sender rule text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:signature_script?rev=1542192349&do=diff Signature Script If you want more complex signatures on outgoing emails, rather than the static text/HTML you can define within VPOP3, then you can use a simple Lua script to define the signature. The Lua script is stored in a file called signature.lua text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:smtp_relay?rev=1542192349&do=diff Mail Connectors -> Mail Senders -> SMTP Relay VPOP3 can be configured to send through an SMTP Relay server (sometimes known as a smarthost). This is the usual configuration for small/medium sized businesses and home users. If you have a dial-up, ADSL, Cable, FTTC etc connection, then your Internet Provider will normally give you access to their SMTP relay service. text/html 2026-03-26T11:41:59+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:smtp_rules_script?rev=1774525319&do=diff Lua SMTP Rules Scripts When VPOP3 is processing SMTP Rules for messages received by SMTP, it runs a script called smtprules_(x).lua, where (x) is replaced by the numeric ID of the SMTP service VPOP3 processes SMTP Rules at least three times for each message - once when MAIL FROM has been received, once for each RCPT TO, and once when the whole message data has been received. text/html 2022-01-25T11:59:27+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:spamrules_ipwhitelist?rev=1643111967&do=diff Allow messages through from a specific IP address This script allows messages through the spam filter if they arrive at VPOP3 from a specific SMTP sender (only when the message is sent directly to VPOP3 using SMTP, not via another server). Add the following to the spamrules_userlocal.txt file. This script file gets processed on all messages. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:spamrules_longsenderdomain?rev=1542192349&do=diff Spamrules example - increase spam score for long sender domain This script is for the case where you to increase the spamminess of emails where the sender's email address contains a long domain. In this case we'll say if the sender's domain has 20 or more characters in the first section (between the @ and first .). Note that we do not necessarily recommend that you do this as it is not a very good indicator of spam, but it is something we've been asked for, so here it is. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:spamrules_manylinks?rev=1542192349&do=diff Spamrules example - increase spam score if there are many links in the email This script is for the case where you to increase the spamminess of emails where the email contains many links - in this case we'll say if the email contains 10 or more links. Note that we do not necessarily recommend that you do this as it is not a very good indicator of spam, and will probably catch a lot of newsletter type emails, but it is something we've been asked for, so here it is. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:spamrules_statement_convert?rev=1542192349&do=diff Spam Filter Rules: Convert Statement Convert Version 2.4.9+ Purpose Allows you to convert data from one form to another The Convert statement requires a data parameter, conversion method and variable name, in the format Convert <data> <conversion method> <variable name> text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:spamrules_statement_dbqueryone?rev=1542192349&do=diff Spam Filter Rules: DBQueryOne Statement DBQueryOne Version 6.16+ Purpose Queries the spam filter database for a single record/aggregate The DBQueryOne statement performs a query on the spam filter database and returns a single value which is either the value of a record or an aggregate of several records. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:summary_log_file_format?rev=1542192349&do=diff Summary Log File Format VPOP3 creates a file called SUMMARY.LOG in the VPOP3 directory which contains summary information which is compiled daily into a daily summary reports sent to the administrator. VPOP3 can keep these summary logs in a subdirectory called text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:user_permissions?rev=1542192349&do=diff Permissions This section lets you configure the permissions that a particular user has. Allowed Protocols The Allowed Protocols section lets you specify which services this user has access to. Note that these settings affect access to the whole service. If you want users to be able to access a service from some IP addresses, but not from others, then use the text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:users_autoresponderconditions?rev=1542192349&do=diff Users.AutoresponderConditions table The Users.AutoresponderConditions table contains a record of all autoresponder trigger conditions created in VPOP3. These tell VPOP3 when a particular autoresponder should fire for a particular user. Each autoresponder can have zero or more conditions. An autoresponder with zero conditions will never fire but can be reactivated later by adding a new condition. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:users_users?rev=1542192349&do=diff Users.Users table The Users.Users table contains a record of all users created in VPOP3. Columns * usernumber - this is a number which is used to refer to the user in other database tables * username - this is the text name of the user username is case insensitive and is indexed in lower case, so to take advantage of the index use something like text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:webmail_advanced?rev=1542192349&do=diff Webmail -> Advanced tab This page is reached from Services -> Webmail Server, then the Advanced tab. Here you can set various options for the VPOP3 Webmail/settings service. Allow Password in URL If you check this option, then you can specify the user's password in a text/html 2026-03-16T16:00:10+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/wiki:syntax?rev=1773676810&do=diff Formatting Syntax DokuWiki supports some simple markup language, which tries to make the datafiles to be as readable as possible. This page contains all possible syntax you may use when editing the pages. Simply have a look at the source of this page by pressing text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/adminapi:userruleconditions?rev=1542192349&do=diff UserRuleConditions Replacement Use: ~userruleconditions~ <format string> ~end~ Required parameter: Account, RuleId This returns the message rule conditions for the specified rule The format string can have the replacements * id - numeric ID of the condition text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/faq:can_i_add_two_licences_together?rev=1542192349&do=diff Can I add two licences together? No, you cannot add VPOP3 licences together. If you have a 10 user licence, and you need more users, you need to upgrade to the next step (25 users in this case). You cannot buy a 5 user licence and add it to the existing 10 user licence. text/html 2018-12-05T15:24:44+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/faq:how_can_i_place_an_order?rev=1544023484&do=diff How can I place an order Online The easiest way to place an order is online. Click on the Purchase item in our website navigation bar, and select the appropriate product. You will be presented with a price list. Choose the required item and click the text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/faq:what_is_vpop3_software_maintenance?rev=1542192349&do=diff What is Software Maintenance? VPOP3 Software Maintenance includes basic email support (target turnaround within 3 days) as well as version upgrades (eg 6.19 to 6.20) free of charge when they are released during the period of validity of your Software Maintenance. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/faq:what_is_vpop3_upgrade_protection?rev=1542192349&do=diff What is Software Maintenance? VPOP3 Software Maintenance includes basic email support (target turnaround within 3 days) as well as version upgrades (eg 4.x to 5.x) free of charge when they are released during the period of validity of your Software Maintenance. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/faq:windows_server_port_conflicts?rev=1542192349&do=diff Windows Server Port Conflicts LDAP Server Conflict When you run VPOP3 on a server edition of Windows you may receive an error saying LDAP server not started - couldn't bind socket port 389 (10048) This error happens because VPOP3 contains an LDAP (Lightweight Directory Access Protocol) server for its global address book functionality, and the Windows 2000/2003 'Active Directory Service' also uses LDAP as its mechanism. These two services are conflicting. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:550_5.7.1_relaying_not_allowed_bad_sender_ip_address?rev=1542192349&do=diff 550 5.7.1 Relaying not allowed! Bad sender IP address This SMTP error message means that the computer which is sending the message is not permitted to send outgoing messages based on the VPOP3 SMTP Service's Access Restrictions. This is probably because someone is trying to send messages from outside your local network, and you have not configured VPOP3 to allow this. You have to be careful when allowing this, because you may configure VPOP3 to be an open-relay, which is a text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:1068_-_the_dependency_service_or_group_failed_to_start?rev=1542192349&do=diff Error 1068 - the dependency service or group failed to start If you get an error 1068 when you try to start VPOP3, then this usually means that the VPOP3DB service (if you are using VPOP3 v5 and later) did not start. In this case try starting that service manually and see what error message is generated then. text/html 2022-12-21T23:35:22+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:1348_-_the_validation_information_class_requested_was_invalid_-_error_when_vpop3_tries_to_access_a_nas_file_server?rev=1671665722&do=diff Error 1348 - The validation information class requested was invalid We have had a report of this error when VPOP3 is trying to access a file share, eg for storing backups or archived messages. In the case where it was reported, it turned out that a Windows Update had converted a 'local' user account into a 'Microsoft' account and that was preventing VPOP3 from accessing the file share, because VPOP3 was trying to use a local account. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:10053?rev=1542192349&do=diff Socket Error 10053 - An established connection was aborted by the software in your host machine. Error 10053 means that an established connection has been dropped. There are three descriptions of this error message we know about, but the descriptions are given by Windows, so they may vary depending on your version of Windows: text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:10060?rev=1542192349&do=diff Socket Error 10060 - Operation Timed Out This error is quite self explanatory. It means that Windows reported that a connection attempt or idle connection timed out. If this error occurs during a connection attempt (eg in a VPOP3 - SMTP Client connection problem error message), then it means that Windows couldn't connect to the ISP mail server within a fixed time (the timeout limit is fixed within Windows itself). This problem can either mean that your ISP is having a problem, that you are con… text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:10061?rev=1542192349&do=diff Socket Error 10061 - The attempt to connect was forcefully rejected Error 10061 means that the computer which VPOP3 was trying to connect to (probably at your ISP) refused the connection from the computer running VPOP3. There are several possibilities that can cause error 10061: text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:10503?rev=1542192349&do=diff Socket Error 10503 - No More Data Error 10503 means that the connection between VPOP3 and a remote computer (normally your ISP) was dropped at an unexpected time. This is different from the error 10054 in that this is a controlled line drop. One way this can happen is if the ISP's POP3 server uses an obsolete standard which allows it to drop the connection if a POP3 'LIST' command is performed on an empty mailbox. The current standard requires that the connection is not dropped until the clien… text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:allow_remote_access_to_vpop3_mailboxes?rev=1542192349&do=diff Allow Remote Access to VPOP3 Mailboxes Sometimes people want to be able to access their office VPOP3 mail server from a remote site or mobile phone etc. These instructions assume you have a permanent Internet connection (eg ADSL, Cable etc). If you don't have a permanent Internet connection, see text/html 2025-05-21T07:57:18+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:allowing_mail_relay_through_vpop3?rev=1747814238&do=diff How To Allow Mail Relay Through VPOP3 If you are allowing remote access into VPOP3 to collect mail then you may also want those remote users to be able to send their outgoing mail through VPOP3 as well. This is more complex than allowing users to collect mail, because, by default, SMTP connections are not authenticated. This means that when someone tries to send a message through VPOP3, VPOP3 doesn't know who that user is. This can cause a problem if unauthorised users try to send mail through… text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:alternative_method_of_automatically_starting_vpop3?rev=1542192349&do=diff Alternative method of automatically starting VPOP3 VPOP3 usually automatically starts as a Windows service. Sometimes this does not work, either because other services need to start first, or Windows is going very slowly at startup, causing the database service to time out, or there are certain database control files which did not get cleared after a previous Windows shutdown. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:archiving_not_saving_messages_on_a_shared_drive?rev=1542192349&do=diff Archiving not saving messages on a shared drive If the VPOP3 archive facility is reporting “Possible error accessing main store directory” and the archive store directory is a drive on another network computer, then there are a few possible difficulties that you have to be aware of. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:attachments_have_been_removed_or_renamed?rev=1542192349&do=diff Attachments have been removed or renamed If you have received an email and one or more of its attachments have been removed or renamed, it might be a result of Attachment Filtering. You can inspect the filtering rules by going to Administration Settings -> Settings -> text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:backscatter?rev=1542192349&do=diff Backscatter In email, “backscatter” is the term used if you send bounce messages back to spam messages. As most spam messages use forged email addresses, then the bounce messages will go to an innocent person, who will find them very annoying. Stopping VPOP3 from sending Backscatter text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:backup_vpop3?rev=1542192349&do=diff How to Backup VPOP3 By default VPOP3 v3 and later will automatically perform a daily backup of the database into a file called DBBACK-x.DMP, where the backup file rotates on a weekly basis (DBBACK-0.DMP is Sunday's backup, DBBACK-1.DMP is Monday's backup, etc). text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:configure_email_signatures?rev=1542192349&do=diff Configure Email Signatures * Global Signatures * Personal Signatures * Webmail Signatures Notes When creating a signature it is generally best to keep it as short as possible. Disclaimers & confidentiality notices in emails are generally regarded as having little or no legal significance, so lengthy signatures just use up bandwidth. text/html 2026-03-23T10:18:43+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:create_an_ssl_certificate?rev=1774261123&do=diff How to create an SSL Certificate VPOP3 Enterprise supports SSL certificates for encrypted sessions. The basic mechanism to create an SSL certificate is that you have to generate a CSR (Certificate Signing Request) then send that to a CA (Certificate Authority) who will sign your certificate and give you the certificate back. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:data_stream_contained_nul_character?rev=1542192349&do=diff Data stream contained NUL character Description of the problem NUL characters (bytes with value 0) are not allowed in email messages and should not be transmitted over POP3, SMTP or IMAP4 except in certain circumstances. If an attachment contains such a byte it must be encoded using text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:err_can_t_open_the_message_file_-_it_s_gone?rev=1542192349&do=diff -ERR Can't open the message file - it's gone! If VPOP3 receives the error message “-ERR Can't open the message file - it's gone!” from your ISP's POP3 server when it is downloading messages, this is a symptom of a fundamental bug in your ISP's POP3 server. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:err_password_supplied_for_xx_is_incorrect?rev=1542192349&do=diff -ERR Password supplied for "xx" is incorrect If you receive a 'POP3 Client Error' something like: -ERR Password supplied for “xx” is incorrect this means that the password on the 'In Mail' tab in VPOP3 for the indicated user is entered incorrectly. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:err_unknown_user?rev=1542192349&do=diff -ERR Unknown User -ERR Unknown User is a POP3 error. There are two places you can receive it: * If you receive it as part of a 'POP3 Client Error' email message from VPOP3, then it means that VPOP3 was unable to log on to your ISP's mail server because the ISP POP3 server reported an error text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:error_creating_service_entry_vpop_-_5?rev=1542192349&do=diff Error creating Service Entry (VPOP3) - 5 If you get this error while running VPOP3SVC QuickConfig to install the VPOP3 service this might mean that some security software is blocking it from creating the service. This has been observed with Sophos Antivirus. In that case, go to the Quarantine Manager in Sophos, and text/html 2025-10-06T15:21:37+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:error_messages?rev=1759764097&do=diff Error Messages This is the place to look if you are trying to trouble shoot a problem and you have received or have access to a specific error message or error code. If instead your problem is that something you think is set up correctly is not working then the best place to look would be the text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:forwarded_emails_not_arriving?rev=1542192349&do=diff Forwarded Emails Not Arriving If you are having problems having VPOP3 forward incoming messages to an external address, but sending messages directly to that address works OK, and forwarding internal messages to that address works OK, then the problem may be the SMTP return address which VPOP3 is using. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:how_to_tell_vpop3_some_users_in_the_local_domain_are_not_to_be_handled_by_vpop3?rev=1542192349&do=diff How to tell VPOP3 that some users in the local domain are not to be handled by VPOP3 In some situations you will have a situation where most of your users are handled by VPOP3, but several users will collect their mail directly from a separate POP3 account on your ISP, even though they may have an email address on the same domain as other users. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:install_to_external_pgsql?rev=1542192349&do=diff Install VPOP3 using external PostgreSQL database (VPOP3 version 5 or later) In some cases, advanced users may wish to have VPOP3 use an external PostgreSQL database instead of the one installed with VPOP3. This is possible by telling VPOP3 the connection details during installation. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:installation_checklist?rev=1542192349&do=diff Installation checklist This list contains some things you may want to check before or after installing VPOP3 to make sure it's not going to encounter any common issues. Before installation * Make sure that VPOP3 is not installed on a RAID 5 or RAID 6 array. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:mozilla_thunderbird?rev=1542192349&do=diff How to configure Mozilla Thunderbird This article won't show you all the possible settings in Thunderbird, because there are so many. Thunderbird is one of the most powerful & flexible email clients available at the time of writing, especially if you use IMAP4 (with VPOP3 Enterprise). text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:outlook_not_able_to_connect_to_vpop3_enterprise_v6.8_when_using_ssl_tls?rev=1542192349&do=diff Outlook not able to connect to VPOP3 Enterprise v6.8 when using SSL/TLS In VPOP3 6.8 SSL v2 is disabled by default (it is considered to be insecure). SSL v3 was released in 1996 and SSL v2 was deprecated because of the well known security flaws. However, it seems that Microsoft Outlook (up to at least Outlook 2010) will not connect to VPOP3 using SSL if VPOP3's SSL v2 is disabled. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:rbl_checking_not_working_in_vpop3_enterprise?rev=1542192349&do=diff RBL Checking not working in VPOP3 Enterprise VPOP3 Enterprise has an RBL checking feature which is configured in the VPOP3 Settings at Services -> SMTP Server -> SPAM Reduction -> Realtime Blacklist Rules If it does not seem to be working properly, there are a few reasons why the RBL feature may not work. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:require_smtp_authentication?rev=1542192349&do=diff Require SMTP Authentication There are some situations where VPOP3 needs to know who is sending mail. This may be if you have VPOP3 configured to behave differently depending on who is sending messages - eg if you have different message size limits depending on the sender, or if you have message monitoring configured for certain users, or you don't want certain people to be able to send mail at all. text/html 2025-12-17T09:19:40+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:restore_a_database_backup?rev=1765963180&do=diff Restore a database backup By default VPOP3 makes a daily backup of the VPOP3 database to a file 'DBBACK-n.DMP' in the VPOP3 installation directory (it is possible to change this in the settings). These are cycled on a weekly basis so you will usually have the last seven days' worth of backups. These can be useful if the database gets damaged somehow. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:sender_domain_must_resolve?rev=1542192349&do=diff Sender Domain Must Resolve If you receive an 'SMTP Client Error' something like: 451 (user@domain.com) Sender Domain Must Resolve this means that the ISP's mail server cannot find the domain.com part of the email address. Often this means that the FROM address of the message is invalid, or that the text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:sender_policy_framework?rev=1542192349&do=diff Sender Policy Framework / SPF SPF is a system used to tell mail servers which IP addresses can send mail from which domains. It is designed to reduce 'spoofing' of email addresses. For instance, if you receive an email message from your bank, your mail software can check that it came from an IP address authorised to send mail from your bank, and treat the message with suspicion if it didn't come from an authorised IP address. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:sharing_folders?rev=1542192349&do=diff Sharing IMAP4 folders Some email clients will allow you to share IMAP4 folders from within the client itself (eg eM Client) or have plugins to allow this (eg Mozilla Thunderbird with the Imap-ACL extension). In that case, you will need to see the documentation for that to set up sharing. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:smtp_client_problem?rev=1542192349&do=diff VPOP3 - SMTP Client Problem These errors occur whilst VPOP3 is communicating with your ISP's SMTP mail server to send your mail. If the message text is: Error with SMTP Client (XXXX (YY)) The server connection was closed unexpectedly Then this means that the the connection between VPOP3 and your ISP's SMTP mail server was closed when VPOP3 did not expect it to be. This can be caused by the network connection failing or a bug in the ISP's mail server which drops the connection in abnormal circ… text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:the_message_could_not_be_loaded._please_return_to_the_quarantine_page_and_try_again?rev=1542192349&do=diff The message could not be loaded. Please return to the Quarantine page and try again This error normally means the message file has been deleted from the hard disk (probably by a virus scanner or something else on the PC). If you can find the message in the VPOP3 settings (Settings text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:timeout_problems_when_sending_or_receiving_attachments?rev=1542192349&do=diff Timeout problems downloading/uploading messages with attachments There are various possible reasons for this, usually to do with third party internet security software but they may also be associated with Windows TCP/IP or dial-up adapter issues. You may not have problems with other software, but that doesn't mean the problem is being caused by VPOP3. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:total_rebuild_of_database?rev=1542192349&do=diff Total Rebuild of Database If you suspect database corruption, sometimes the best thing to do is to totally rebuild the database. This involves six steps: * Stop VPOP3 * Backup Database * Delete Database * Re-create Database * Restore/Create Database text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:upgrade_vpop3?rev=1542192349&do=diff How To Upgrade VPOP3 Note: if you are upgrading to VPOP3 version 5 or later from version 4 or earlier, please see How To Upgrade VPOP3 to version 5 Upgrading VPOP3 is a straightforward process. Download VPOP3 from our web site and ideally back up your current installation just in case something goes wrong. Then simply run the installer that you downloaded and install it over the top of your existing VPOP3. All your settings and mail will be preserved. text/html 2019-11-08T15:37:52+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:upgrade_vpop3_to_version_5?rev=1573227472&do=diff How To Upgrade VPOP3 to version 5 or later Upgrading VPOP3 is usually a straightforward process. Download VPOP3 from our web site and back up your current installation just in case something goes wrong. Then simply run the installer that you downloaded and install it over the top of your existing VPOP3. All your settings and mail will be preserved. text/html 2020-06-29T10:43:58+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:upgrade_vpop3_to_version_7?rev=1593427438&do=diff How to upgrade VPOP3 to version 7 or later from version 6 or earlier As usual the process to upgrade is simply to install the later version over your existing installation (do not uninstall anything first). The below is technical information detailing an extra step performed by the installer in this particular upgrade step. text/html 2026-03-18T20:49:54+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:upgrade_vpop3_to_version_9?rev=1773866994&do=diff Upgrading VPOP3 to version 9.x from v7 or v8 VPOP3 v9 and later requires a 64 bit version of Windows 8.1 or later VPOP3 v9.x uses PostgreSQL 18 as its database engine. This can only easily be upgraded from PostgreSQL 9.3 or later, which means it must be an upgrade of VPOP3 v7 or later. If you are using an earlier version of VPOP3, then upgrade it to v8.7 first, then upgrade to v9 or later text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:vpop3_deleting_messages_as_old_messages?rev=1542192349&do=diff VPOP3 Deleting messages as 'old' messages If VPOP3 says 'deleting old message' in the status window activity log that means that it has seen the unique ID of that message before, longer ago than the time specified for VPOP3 to leave messages on the server, so it thinks that the message is an old message, and so deletes it. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:vpop3_does_not_have_write_access_to_the_registry_-_please_check_and_restart_vpop3?rev=1542192349&do=diff Error message: VPOP3 does not have write access to the registry - please check and restart VPOP3 VPOP3 needs to be able to write to the Windows Registry at HKEY_LOCAL_MACHINE\Software\PaulSmith. Usually, VPOP3 will run in the 'Local System' user account which has full permission to the HKEY_LOCAL_MACHINE part of the registry. However, it is possible to lock down permissions further, or to run VPOP3 in a different user account. In that case, you may encounter this error message. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:vpop3_is_responding_slowly?rev=1542192349&do=diff VPOP3 Is Responding Slowly If VPOP3 is responding slowly to users there are several common causes: * The VPOP3 server disk may be badly fragmented. Defragment the server disk(s). Note that sometimes the Windows defragmenter will say that the disk doesn't need defragmenting even if it does, so it is best to do it anyway. Also, there is a better free defragmenter available called text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:vpop3db_service_doesn_t_exist?rev=1542192349&do=diff VPOP3DB Service doesn't exist If VPOP3 v3 or later won't start, and you find that the VPOP3DB (or PostgreSQL-VPOP3) service does not exist in the Windows Services list, it may be that you have just moved VPOP3 and made a mistake following the move procedure or something has removed the service for some reason. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:your_connection_has_been_blocked_temporarily_-_try_again_later?rev=1542192349&do=diff Error message: Your connection has been blocked temporarily - Try again later If you get an error message in your email client software saying Your connection has been blocked temporarily - Try again later or Server access temporarily blocked! Please try again later text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/mailapi:userruleconditions?rev=1542192349&do=diff UserRuleConditions Replacement Use: ~userruleconditions~ <format string> ~end~ Required parameter: RuleId This returns the message rule conditions for the specified rule The format string can have the replacements * id - numeric ID of the condition * field - field/data to test text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:archive_search_results?rev=1542192349&do=diff Message Archive -> Results Tab Settings -> Message Archive -> Results tab The Results tab only exists if you have previously done a search operation and are viewing the results of that search. The Results page shows you a list of the messages (up to 1000 entries are available) returned by the search. You can select multiple entries by using shift+click or ctrl+click text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:attachment_processing?rev=1542192349&do=diff Settings -> Attachment Processing The Attachment Processing page allows you to configure VPOP3 to perform two distinct functions on messages that contain attachments: * * Filtering The Filtering tab is divided into four main sections: Attachment Filtering text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:autoresponder_commands?rev=1542192349&do=diff Autoresponder Commands This article only applies to VPOP3 v4 and earlier A VPOP3 autoresponder can contain special text strings to create special behaviour, in addition to plain text as part of the response. There are three types of 'command' * text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:autoresponders_v3_v4?rev=1542192349&do=diff Autoresponders - v3 and v4 This section lets you define an autoresponder for a user. An autoresponder is a message which is sent back in response to a message which arrives in this user's mailbox. The Autoresponder Type can be set to None, Simple Autoresponder text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:database_backups?rev=1542192349&do=diff Database -> Backups Tab The Backups tab lets you specify how VPOP3 will make its daily backup of its database. We strongly recommend that you backup the database regularly in case of disk problems or file corruption. You can use the VPOP3 backup feature, or manually backup the PostgreSQL database using the pg_dump command, or use another program to backup the PostgreSQL database if you wish. Note that a simple disk copy will text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:database_message_store?rev=1542192349&do=diff Database -> Message Store Tab This tab says how VPOP3 handles its message store Message Store The Delay while moving messages setting tells VPOP3 how quickly to import messages into the new database structure if it was upgraded from version 2.x or earlier. Usually this is OK to be left as it is, but if there is some special requirement to import the messages more quickly, you can decrease this number, but that will increase the load on the server. text/html 2023-11-12T09:51:40+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:dmarc_reporter_script?rev=1699782700&do=diff DMARC Reporter Script (from VPOP3 v8.6 onwards) This script lets you customise how VPOP3 sends DMARC reports to the sending domain. This can be useful in case the sending domain's DMARC configuration is incorrect as that can cause errors sending the reports or cause messages to be 'stuck' in VPOP3's Outqueue. These problems won't cause any lasting damage, but may be inconvenient or annoying, so you can alter the behaviour using Lua scripting text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:download_rules?rev=1542192349&do=diff Download Rules Download rules are a facility in VPOP3 where it can look at message summary information before downloading a message from an ISP POP3 mailbox (they do not work on incoming SMTP messages - use SMTP Rules for that) To edit download rules, go to text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:global_address_book?rev=1542192349&do=diff Settings -> Global Address Book The VPOP3 global address book allows users to access a shared address book from any email client which supports the 'LDAP' protocol (most modern email clients do, but they may call it 'directory service' Importing Entries text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:groups?rev=1542192349&do=diff Groups In VPOP3 a 'group' is mainly an administrative feature. If you only wish to have a list of email addresses to send messages to under one address, you should use the 'List' feature instead. The main function of Groups is to let you set certain user attributes for a whole group of users at once. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:list_all_messages_in_lan_forwrding_queue?rev=1542192349&do=diff Database query to list ALL messages in the LAN forwarding queue The VPOP3 settings show the first 100 messages in the LAN forwarding queue. Usually this is sufficient as the LAN forwarding queue is usually nearly empty, but in case of a problem it may be much bigger. The database queries below may help in that situation. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:list_messages_in_lan_forwrding_queue_waiting_to_go_to_a_specific_server?rev=1542192349&do=diff Database query to list messages in the LAN forwarding queue waiting to go to a specific server The VPOP3 settings show the first 100 messages in the LAN forwarding queue. Usually this is sufficient as the LAN forwarding queue is usually nearly empty, but in case of a problem it may be much bigger. The database queries below let you list just messages going to a specific server. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:local_mail_general?rev=1542192349&do=diff Settings -> Local Mail -> General The Local Mail -> General page allows you to configure a few simple, but fundamentally important settings. Default Domain In the majority† of cases, this is the domain name that VPOP3 will use when sending automated messages; for instance, users may receive a message from text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:mappings?rev=1542192349&do=diff Mappings In VPOP3, Mappings are a way of explicitly linking an email address to a user or list. They can also be used to indicate that an email address is remote, even though it would otherwise appear to be a local email address. In other email servers, a similar feature may be called 'aliases' text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:message_archive?rev=1542192349&do=diff Message Archive The Message Archive facility is for VPOP3 to store copies of all messages sent or received. It stores the messages in a central archive store which can be searched by an administrator. The prime purpose of the archive facility is for recording messages in case of possible disputes, as you can see what was sent/received by email. It can also be used as a backup/restore facility in an emergency, but that is not its prime purpose, so it is better to have a proper text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:misc_dns?rev=1542192349&do=diff Misc -> DNS Tab Settings -> Misc Settings -> DNS The DNS tab lets you specify which DNS servers VPOP3 will use. DNS (Domain Name System) is a system which converts Internet host names (eg www.google.com) into a numeric IP address (eg 1.2.3.4), because all connections on the Internet are actually performed using numeric IP addresses, but it is easier for people to remember names. text/html 2026-01-05T09:25:39+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:password_strength_checking_script?rev=1767605139&do=diff Password Strength Checking Script You can tell VPOP3 to enforce password strength checks by using a Lua script which performs the checks for you. The Lua script can be edited in Settings -> Scripts and is called passwordcheck.lua (in older versions of VPOP3 it is stored in a file called text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:pop3_general?rev=1542192349&do=diff POP3 Server -> General Tab Services -> POP3 Server -> General tab This page sets the general settings for the POP3 service component in VPOP3. The POP3 service is how users collect their email from VPOP3 using a POP3 email client Service Name The Service Name is a name you give the service for your reference. It is only used in administrative displays and logging, so the name doesn't matter. Most people leave it at the default. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:sender_advanced_relay_settings?rev=1542192349&do=diff Mail Sender Advanced Relay Settings SMTP Return Address The SMTP Return Address (or Return Path) is a hidden part of a message which says where bounce messages (and other automated responses) should be sent. (It is not the same as the Reply address text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:smtp_direct?rev=1542192349&do=diff Mail Connectors -> Mail Senders -> SMTP Direct VPOP3 can be configured to send mail directly to the recipient's mail server (or the recipient's mail service provider). Usually this is only used if you have a high-end business class Internet connection - such as a leased line, or your mail server is co-located in a data centre. Attempts to use SMTP Direct sending on a dial-up/ADSL/Cable/FTTC/etc connection may be problematic since the receiving mail server may think you a home user who has been … text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:smtp_vrfy_expn?rev=1542192349&do=diff SMTP Service -> VRFY/EXPN Tab Services -> SMTP Server -> VRFY/EXPN Tab VRFY and EXPN are SMTP commands which allow another computer to verify email addresses without sending mail to them. See RFC 5321 for technical details. Usually, these commands should be disabled for security purposes, but some other software may be able to use these commands for various reasons. In this case, you can enable them, but restrict access to the IP address(es) you trust. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:spamfilter_script_configuration?rev=1542192349&do=diff Spamfilter Script Configuration tab You reach this tab by going to Settings --> Spam Filter -> General, and then choose the General tab. The Spamfilter script has various settings that can be changed to alter the behaviour of the spamfilter. These are defined in the script, so may change with different versions of the script. The settings are currently: text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:spamrules_addrandomtexttosubject?rev=1542192349&do=diff Use the spam filter scripting to add random text to the subject on incoming messages This needs VPOP3 version 5 or later. This script is for the case where you want a message to the 'support' user to have the text [XXX-99999] added to an incoming message's subject if it does not already exist. Some people want this text to use as reference numbers for a text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:spamrules_checkrecipient?rev=1542192349&do=diff Increase the spam score for certain recipients This script is for the case where you want certain recipients to have a weighted score. For instance if you have users who have left and who mostly receive spam, but you don't want to reject their mail totally. text/html 2020-10-05T16:14:12+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:spamrules_header?rev=1601914452&do=diff Increase the spam score for header marker This script is for the case where your ISP adds a header eg 'X-Spam: Yes' to the message header, and you want the VPOP3 spamfilter to quarantine messages with that marker. Add the following to the spamrules_userchecks.txt file. This script file only gets processed on incoming messages (the spamrules_localmail.txt script ends the processing of locally sent messages) text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:spamrules_statement_dbupdate?rev=1542192349&do=diff Spam Filter Rules: DBUpdate Statement DBUpdate Version 6.16+ Purpose Updates a record in the spam filter database The DBUpdate statement requires a component name, key, operator and value, in the format DBUpdate <component name> <key> <operator> <value> text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:spamrules_subject?rev=1542192349&do=diff Increase the spam score for subject marker This script is for the case where your ISP adds a marker eg '[spam]' to the message subject, and you want the VPOP3 spamfilter to quarantine messages with that marker. Add the following to the spamrules_userchecks.txt file. This script file only gets processed on incoming messages (the spamrules_localmail.txt script ends the processing of locally sent messages) text/html 2023-08-14T16:01:01+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:spamrules_variables?rev=1692028861&do=diff Spam Filter Rules: Variables The VPOP3 spam filter script language supports simple variables. In most places these are specified as ${<variable name>}, but in some places they are just specified as <variable name> - for instance where a statement always puts its result into a variable. text/html 2019-08-19T08:58:45+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:status_monitor_protocol?rev=1566205125&do=diff Status Monitor (port 5109) protocol This page documents the protocol used between VPOP3 and the Status Monitor. It's not intended for any other purpose, so it's a bit limited, but in certain cases you may find this useful Login Before the Status Monitor receives any updates or can issue commands it must log in using a user's credentials. text/html 2026-03-16T11:02:32+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:useful_database_queries?rev=1773658952&do=diff Useful Database Queries Below are some database (SQL) queries which may be useful in some situations. You can run these from the 'psql' program at the command prompt. Some can also be run from the Settings -> Database -> Query page in the VPOP3 settings. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:user_advanced?rev=1542192349&do=diff User Advanced settings The Edit User → Advanced tab contains some 'advanced' settings for a VPOP3 user. Message Recycle Bin In VPOP3 Enterprise (v5 and later) the Message Recycle Bin will keep messages in the message store for a short time after the user has deleted the messages. This is to allow easier recovery from the inevitable case where a user has deleted messages by mistake, and wants them back. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:using_tables?rev=1542192349&do=diff Using tables/grids Many VPOP3 settings pages use grids to show you a set of data, for instance on the Users, Mappings and Lists pages. These have several standard features which are described below. * Most of the grids are 'delayed-fill'. This means that they don't fill up with data immediately when the page is loaded, this is to speed up the page load times. Only the first (visible) section of the grid is filled at first (sometimes there may be a short delay before this is filled, if the da… text/html 2024-10-29T16:08:01+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:vpop3.hexstring?rev=1730218081&do=diff VPOP3.HexString Added in VPOP3 8.7 This function returns a Hex string encoding of the supplied parameter VPOP3.HexString(text) or VPOP3.HexString(byte-array) It can be passed either a text string or a table containing one byte per table-entry (eg as returned from the text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:whats_new_in_version_5_webmail?rev=1542192349&do=diff What's new in version 5 webmail? This is a list of some of the most noticeable changes to VPOP3's webmail interface for version 5. For a more detailed list of changes, view our bugtracker. [VPOP3 Version 5 - mobile compatible webmail] Mobile compatible webmail If you access version 5 webmail from a mobile device, you will probably be redirected to the mobile compatible version. It is a cut-down version of Webmail, which retains the key features, but doesn't utilise the extra features which w… text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:white_black_lists?rev=1542192349&do=diff Spamfilter White/Blacklists This lets you set whitelists & blacklists for the spam filter. There are four lists you can manage. The Whitelist Addresses & Blacklist Addresses lists let you specify sender email addresses to check. With the default rule weights, if a sender's address is on the Whitelist, it will be allowed through the spam filter, and if it is on the Blacklist it will be blocked. If an address is on both the Whitelist and the Blacklist, they will cancel each other out, and the me… text/html 2022-10-01T11:32:39+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/wiki:dokuwiki?rev=1664623959&do=diff DokuWiki wiki:dokuwiki DokuWiki is a simple to use and highly versatile Open Source wiki software that doesn't require a database. It is loved by users for its clean and readable syntax. The ease of maintenance, backup and integration makes it an administrator's favorite. Built in