https://wiki.pscs.co.uk/ 2026-05-13T04:01:48+00:00 https://wiki.pscs.co.uk/ https://wiki.pscs.co.uk/_media/wiki:dokuwiki.svg text/html 2025-05-08T08:23:35+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:lua_smtp_server_script?rev=1746692615&do=diff SMTP Server Lua Scripting The SMTP Server Lua Script is called SMTPSVR.LUA and can be edited from the Settings -> Scripts page in the VPOP3 settings. This script is called whenever an instance of the VPOP3 SMTP server is launched - ie whenever someone opens a connection to port 25 on the VPOP3 server to send it a message, whether from a local user or an incoming SMTP message. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:sender_advanced_settings?rev=1542192349&do=diff Mail Sender Advanced Settings Mail Connectors -> Mail Senders -> (name) -> Advanced Advanced Domain Filtering For VPOP3 v6.11 and later, see the Domain Filtering section of the user manual. The Domain Filtering box lets you restrict which email messages are sent via this Mail Sender. You specify each rule on a separate line, and the message will be sent if it matches any sender rule text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:spamrules_assignments?rev=1542192349&do=diff Spam Filter Rules: Assignments You can assign values to variables using the syntax ${variable} = value | ${variable} Assignment operators The spam filter rules support the following assignment operators: = Specify the value of the variable to equal the value after the assignment operator text/html 2024-01-15T11:35:45+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:repairing_corrupted_database?rev=1705318545&do=diff Repairing corrupted database With PostgreSQL (as with most high-end databases) the database system will automatically recover after power failures etc, if it can. If it can't then there is no manual 'repair' function, because the data cannot totally be recovered (or it would automatically have been recovered). text/html 2021-08-09T10:55:07+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:scheduler_script?rev=1628506507&do=diff Scheduled Task Script Note that this functionality is only available in VPOP3 Enterprise VPOP3 Enterprise can run Lua script periodically to do custom background tasks. It can run a function every minute, 5 minutes, hourly or daily. The Lua script is stored in a file called text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:user_message_rules?rev=1542192349&do=diff Message Rules The Edit User -> Message Rules tab can be used to create/edit rules which are processed when messages arrive in a User's mailbox. They can be used to copy messages, mark them as read, delete them, etc VPOP3 will process Message Rules in the order they appear in the list. If you want to change the order of the rules, you can drag & drop them into the correct order. Usually when VPOP3 has processed a rule, it will go on to check further rules, but you can use the text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:error_message_handling?rev=1542192349&do=diff Error Message Handling VPOP3 will normally send an error message to the Main Administrator every time it encounters an error. We recommend you leave it like this in most cases - if an error message occurs repeatedly, then it usually means there's an underlying problem which needs resolving rather than ignoring. text/html 2025-10-06T15:21:37+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:error_messages?rev=1759764097&do=diff Error Messages This is the place to look if you are trying to trouble shoot a problem and you have received or have access to a specific error message or error code. If instead your problem is that something you think is set up correctly is not working then the best place to look would be the text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:error_sending_message_after_authentication?rev=1542192349&do=diff "Error Sending Message After Authentication" in Webmail If you get an error while sending a message using Webmail, such as “Error sending message after authentication - error 0 - text 502 Error: command not implemented” this means that you have another SMTP server running on the VPOP3 computer, and when the VPOP3 Webmail service tries to send the message it is sending it to this other SMTP server, rather than to the VPOP3 server. The Webmail service uses internal commands which the other SMTP… text/html 2026-04-06T17:59:47+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:mail_not_downloading_from_isp?rev=1775498387&do=diff Mail Not Downloading From ISP This normally happens because you have told VPOP3 to Leave Messages On Server (on the Mail Connectors -> Mail Collectors -> (name) -> POP3 General tab). If you do this, VPOP3 will leave messages on the ISP's mail server for several days, and remember that it has already downloaded them. Then, the next time it connects it will see that there are some messages waiting, but it may find that it has already downloaded them, so it won't download them again. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:problems_accessing_vpop3_settings?rev=1542192349&do=diff Problems accessing VPOP3 Settings If you have problems accessing the VPOP3 settings: * Go to Start -> Programs -> VPOP3 -> Configure VPOP3 on the VPOP3 computer. That should open up a web browser and take you to the login page * If VPOP3 doesn't show the login page, and shows a '403' error page instead, that means that the access restrictions for the WebMail service have been restricted so that this computer cannot access the WebMail service. text/html 2025-12-17T09:19:40+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:restore_a_database_backup?rev=1765963180&do=diff Restore a database backup By default VPOP3 makes a daily backup of the VPOP3 database to a file 'DBBACK-n.DMP' in the VPOP3 installation directory (it is possible to change this in the settings). These are cycled on a weekly basis so you will usually have the last seven days' worth of backups. These can be useful if the database gets damaged somehow. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:smtp_rule_example_-_restrict_who_can_send_to_a_local_email_address?rev=1542192349&do=diff SMTP Rule Example - restrict who can send to a local email address If you have a local email address (a user, group or distribution list) and you want to restrict which email addresses can send messages to this address, you can use SMTP rules. There are a few ways you can configure the SMTP rules for this scenario. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:the_message_could_not_be_loaded._please_return_to_the_quarantine_page_and_try_again?rev=1542192349&do=diff The message could not be loaded. Please return to the Quarantine page and try again This error normally means the message file has been deleted from the hard disk (probably by a virus scanner or something else on the PC). If you can find the message in the VPOP3 settings (Settings text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:upgrade_vpop3?rev=1542192349&do=diff How To Upgrade VPOP3 Note: if you are upgrading to VPOP3 version 5 or later from version 4 or earlier, please see How To Upgrade VPOP3 to version 5 Upgrading VPOP3 is a straightforward process. Download VPOP3 from our web site and ideally back up your current installation just in case something goes wrong. Then simply run the installer that you downloaded and install it over the top of your existing VPOP3. All your settings and mail will be preserved. text/html 2019-11-12T16:09:08+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:v3_-_move_to_a_new_pc?rev=1573574948&do=diff Move VPOP3 Version 3 or 4 to a new PC Moving VPOP3 Version 3 or 4 to a new PC is slightly different from moving earlier versions, because of the database system. The summary of steps is: * Stop VPOP3 on the original PC * Manually make a backup of the database on the original PC text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:vpop3_deleting_messages_as_old_messages?rev=1542192349&do=diff VPOP3 Deleting messages as 'old' messages If VPOP3 says 'deleting old message' in the status window activity log that means that it has seen the unique ID of that message before, longer ago than the time specified for VPOP3 to leave messages on the server, so it thinks that the message is an old message, and so deletes it. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:archive_offline?rev=1542192349&do=diff Message Archive -> Offline Tab Settings -> Message Archive -> Offline Tab. The Offline tab lets you tell VPOP3 to move old archived messages to an alternative store, such as CD/DVD or external drive etc. VPOP3 will create a ZIP file containing the old messages. The archive index will still remember the messages, and the name of the ZIP file they are contained in, so you will still be able to search for messages on date, sender, subject, etc, but not on the message content. text/html 2023-08-16T07:48:01+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:lua_pop3_client_script?rev=1692172081&do=diff POP3 Client Lua Scripting The POP3 Client Lua Script is called POP3CLT.LUA and is edited in Settings -> Scripts. This script is called whenever VPOP3 runs a POP3 session to download messages from a remote POP3 server. VPOP3 will call the following Lua functions in the script at the following times: text/html 2024-03-21T10:49:54+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:outgoing_message_script?rev=1711018194&do=diff Outgoing Message Scripting Every time VPOP3 adds a message to the Outgoing mail queue, it runs a script called outmessage.lua. Scripts are stored as files in the VPOP3 directory in VPOP3 v6.6 and earlier, or managed through the Settings -> Scripts page in VPOP3 v6.7 and later. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:spamrules_statement_ifmatch?rev=1542192349&do=diff Spam Filter Rules: IfMatch Statement IfMatch Version 2.1.7+ Purpose Allows you to perform a regular or substring match on a variable or part of the message being processed IfMatch statements require a data parameter and a search value, in the format text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:user_delivery_script?rev=1542192349&do=diff User Delivery Script (VPOP3 v6.5 or later) If there is a <username>/delivery.lua script, this Lua script can override VPOP3's message delivery options. You can edit this in the Settings -> Scripts page in the settings. This script affects how VPOP3 will handle how messages being delivered to this user are handled. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:white_black_lists?rev=1542192349&do=diff Spamfilter White/Blacklists This lets you set whitelists & blacklists for the spam filter. There are four lists you can manage. The Whitelist Addresses & Blacklist Addresses lists let you specify sender email addresses to check. With the default rule weights, if a sender's address is on the Whitelist, it will be allowed through the spam filter, and if it is on the Blacklist it will be blocked. If an address is on both the Whitelist and the Blacklist, they will cancel each other out, and the me… text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/faq:what_is_vpop3_software_maintenance?rev=1542192349&do=diff What is Software Maintenance? VPOP3 Software Maintenance includes basic email support (target turnaround within 3 days) as well as version upgrades (eg 6.19 to 6.20) free of charge when they are released during the period of validity of your Software Maintenance. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/faq:what_is_vpop3_upgrade_protection?rev=1542192349&do=diff What is Software Maintenance? VPOP3 Software Maintenance includes basic email support (target turnaround within 3 days) as well as version upgrades (eg 4.x to 5.x) free of charge when they are released during the period of validity of your Software Maintenance. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:alternative_method_of_automatically_starting_vpop3?rev=1542192349&do=diff Alternative method of automatically starting VPOP3 VPOP3 usually automatically starts as a Windows service. Sometimes this does not work, either because other services need to start first, or Windows is going very slowly at startup, causing the database service to time out, or there are certain database control files which did not get cleared after a previous Windows shutdown. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:autoresponders_out_of_office?rev=1542192349&do=diff Autoresponders / Out of Office VPOP3 has an autoresponder facility for sending automatic replies when a message arrives in a mailbox. This is often used for 'Out of Office' replies, but it is not limited to that use. To set an autoresponder, the administrator can edit the user and go to the text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:can_t_alter_dates_in_autoresponder_rules?rev=1542192349&do=diff Can't alter dates in Autoresponder Rules If you try to edit an Autoresponder Rule which has a start/end time set, you may notice that you can't edit the dates in there. This is because VPOP3 prevents you from setting it so that the “start date” is after the “end date text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:controlling_vpop3_via_email?rev=1542192349&do=diff Controlling VPOP3 via Email You can control certain aspects of VPOP3 by sending emails to 'mailer_daemon@<your domain>' The subject line must be one of the lines below: * Set Assistant * Query Assistant * Password * Set Forwarding * Query Forwarding text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:database_disk_caching?rev=1542192349&do=diff Database & Disk Caching Disk Caching One key point is that, like all other high-end databases, PostgreSQL should not be run on a server with disk level write back caching. With write back caching, the disk will report data as being written to disk when it is still in the disk's cache memory. If the power then fails, this data is lost and can cause database corruption. As long as the database server really knows when the data has been written to disk, power failure will not cause database corru… text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:database_maintenance?rev=1542192349&do=diff Database Maintenance VPOP3 uses the PostgreSQL database server for most of its data storage. Normally this will not require any special maintenance, because it will manage itself. To do any special database maintenance you will need to close down VPOP3 first, because PostgreSQL needs exclusive access to the database to perform any operations such as decreasing the size of database files. Note that these operations may take some time! There are some PostgreSQL utility programs in the VPOP3\pgs… text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:french_webmail_language_file?rev=1542192349&do=diff French Webmail Language File Copy/paste the text below to a file 'french.lng' or 'francais.lng' in the VPOP3 directory. (French users, feel free to update/correct the text below) #login page logintitle=VPOP3 Login webadminlogin=web admin login webmaillogin=web mail login enterusername=You must specify your VPOP3 username here bookmarksnotsupported=I'm sorry, but your web browser does not support this function. You will have to add this page to your bookmarks manually. loginfailed=Login Faile… text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:full_text_search?rev=1542192349&do=diff Full Text Search In VPOP3 Enterprise v7.0 a facility for full-text-search on message content was added. Because the full-text-search indexes can be quite big, this facility is optional. For several reasons, the full-text-search is stored in a separate PostgreSQL database. This means that it is not backed up with your standard backups. After a restore, the full-text-search index can be rebuilt from the raw message content. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:german_webmail_language_file?rev=1542192349&do=diff German Webmail Language Page Copy/paste the text below to a file 'german.lng' in the VPOP3 directory. (German users, feel free to update/correct the text below) #login page logintitle=VPOP3 Login webadminlogin=web admin login webmaillogin=Webmail Anmeldung enterusername=Sie m&uuml;ssen einen Benutzernamen angeben bookmarksnotsupported=I'm sorry, but your web browser does not support this function. You will have to add this page to your bookmarks manually. loginfailed=Anmeldung fehlgeschlagen … text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:installation_checklist?rev=1542192349&do=diff Installation checklist This list contains some things you may want to check before or after installing VPOP3 to make sure it's not going to encounter any common issues. Before installation * Make sure that VPOP3 is not installed on a RAID 5 or RAID 6 array. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:locked_accounts?rev=1542192349&do=diff Locked Accounts VPOP3 has a security feature which will lock out an account after it has had several failed login attempts. This feature is to make it harder for an attacker to use a brute force or dictionary password attack on an account. The default settings are that after more than 3 attempts to log into an account with an incorrect password, VPOP3 will lock the account for 30 minutes. You can change these settings on the text/html 2026-04-06T17:57:00+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:make_vpop3_redownload_messages_from_isp?rev=1775498220&do=diff How to make VPOP3 re-download POP3 messages from the ISP If you have the VPOP3 Mail Collector setting Leave Mail On Server enabled, then VPOP3 will leave your messages on the ISP POP3 server for the specified number of days after downloading it. If, during this time, you want to make VPOP3 download those messages again, then you can do so. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:outlook_outlook_express_are_sending_mail_repeatedly?rev=1542192349&do=diff Outlook / Outlook Express is sending mail repeatedly If you are using Outlook or Outlook Express you may occasionally find that mail is being sent repeatedly. There are a couple of possible reasons for this which we know of Sending taking too long text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:vpop3_not_starting_properly?rev=1542192349&do=diff VPOP3 Not Starting Properly If VPOP3 is not starting properly, then the first thing to check is whether the database server is starting. In VPOP3 v3 and later, VPOP3 uses a PostgreSQL Database server for data storage, so if the database server is not running, VPOP3 will not be able to start properly. In this case, the VPOP3.EXE process may appear in Task Manager, but it won't respond to anything, or it may appear in Task Manager and then stop after a short period. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:autoresponders_v3_v4?rev=1542192349&do=diff Autoresponders - v3 and v4 This section lets you define an autoresponder for a user. An autoresponder is a message which is sent back in response to a message which arrives in this user's mailbox. The Autoresponder Type can be set to None, Simple Autoresponder text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:import_users_from_file?rev=1542192349&do=diff Import Users From File VPOP3 supports the importation and exportation of users, via a CSV file (see for a specification of the CSV file format). NOTE: This process is not designed to provide a complete backup of user data, nor is it intended to facilitate moving VPOP3 to a new computer. Instead, see the following relevant pages: text/html 2025-08-20T16:08:40+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:lan_forwarding_script?rev=1755706120&do=diff LAN Forwarding Scripting (Added in V8.7) This is stored in the 'LanForwarding.lua' script in Settings -> Scripts Pre-send These functions are called before the message is placed in the LAN Forwarding queue There are two global variables set: * text/html 2026-02-24T15:49:48+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:lua_smtp_mx_control?rev=1771948188&do=diff Lua SMTP MX Control Every time VPOP3 is going to send messages using direct MX sending, it runs a script called mxout.lua which can be created/edited in Settings -> Scripts (or in the VPOP3 directory in VPOP3 v6.6 or earlier). Global Variables Starting with v8.8, the following global variables are defined: text/html 2025-08-14T09:24:55+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:lua_smtp_relay_control?rev=1755163495&do=diff Lua SMTP Relay Control Every time VPOP3 is going to send messages via SMTP Relay, it runs a script called relayout.lua in the VPOP3 directory. Global Variables This script may have global variables, depending on your version of VPOP3. In VPOP3 3.0.0L and later, there are two read-only global variables set at the start of the script: text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:management_scripting?rev=1542192349&do=diff Management Scripting In VPOP3 Enterprise, from version 6.17 there is the facility to run Lua scripts manually or according to a schedule. These scripts can do things like access mail folders & messages and perform some maintenance on them. Creating a new script text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:misc_advanced?rev=1542192349&do=diff Misc -> Advanced Tab Settings -> Misc Settings -> Advanced You will normally not need to change any settings on this page unless VPOP3 technical support have suggested it. If you do make changes, and want to go back to the original settings, the Restore Defaults button will restore the settings to their defaults. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:pop3_collection?rev=1542192349&do=diff POP3 Mail Collection POP3 Mail Collection is when VPOP3 will collect mail from an external POP3 mailbox - for instance, from an Internet Provider. POP3 General This page tells VPOP3 how to collect mail. * POP3 Server Address - this is the name (or IP address) of the POP3 server from which you want VPOP3 to collect mail text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:schedule?rev=1542192349&do=diff Mail Connectors -> Connector Schedule The Connector Schedule tells VPOP3 when to connect to send mail using Mail Senders and collect mail using Mail Collectors. It does not affect incoming SMTP over a permanent connection, or LAN Forwarding. The connection schedule also tells VPOP3 when to check for updates to the text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:spamrules_db_comparator?rev=1542192349&do=diff Spamfilter database comparators Several Spamfilter DB statements allow comparators which are listed below If the value specified in the statement is numeric: * = or == compare numeric values for equality * <> or != compare numeric values for inequality text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:status?rev=1542192349&do=diff Status The VPOP3 Status screen has two tabs * Server Status * Sessions Server Status The Server Status tab is essentially a copy of the VPOP3 Status Monitor information. * Connection Status - this shows the 'online' status of VPOP3. If it says idle, it does not mean VPOP3 is not working, or not doing anything, it just means that it is not currently sending or collecting mail from the Internet. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:users_autoresponders?rev=1542192349&do=diff Users.Autoresponders table The Users.Autoresponders table contains the users' autoresponder definitions Columns * autoresponderid - this is a numeric id of the autoresponder entry (primary key) * owneruser - this is the numeric id of the user which the autoresponder belongs to (or 0 for a 'template' autoresponder) text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/adminapi:smtpclientblocks?rev=1542192349&do=diff SMTPClientBlocks Replacement Use: ~smtpclientblocks~ <format string> ~end~ The format string can have the replacements * address - IP address (returned as host address or CIDR address as appropriate) * date - the date/time the address was added to the database in YYYYMMDDHHMMSS format text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/adminapi:userruleactions?rev=1542192349&do=diff UserRuleActions Replacement Use: ~userruleactions~ <format string> ~end~ Required parameter: Account, RuleId This returns the message rule actions for the specified rule The format string can have the replacements * id - numeric ID of the action * type - action type text/html 2025-10-14T15:43:01+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/faq:gdpr_hosted_vpop3?rev=1760456581&do=diff GDPR for hosted VPOP3 service (Since Brexit, the UK has “UK GDPR” instead of “EU GDPR”, so this document refers to UK GDPR) Also see GDPR for VPOP3 as most of that applies to the VPOP3 hosting service as well. This Data Processing Agreement is part of our hosted VPOP3 service terms. You can view the revision history by clicking on the 'clock' icon to the right. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/faq:i_got_a_copy_of_vpop3_via_trialpay_and_would_like_a_refund?rev=1542192349&do=diff I got a copy of VPOP3 via TrialPay and would like a refund If you obtained a VPOP3 Home User licence via <http://www.trialpay.com> and are unhappy with it, you will need to get in touch with TrialPay directly. Our licence is given as a complimentary offer after you have purchased through them, and they have notified us with your details. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/faq:pop3?rev=1542192349&do=diff POP3 Protocol POP3 is the most basic email protocol for collecting mail which is in common use. Almost all email client programs (such as Microsoft Outlook & Outlook Express, Mozilla Thunderbird, etc) can collect mail using POP3. With POP3, mail is usually downloaded by the email client and stored on the user's local PC. It is then deleted from the mail server, so the only copy is on the user's PC. Any mail folders etc are all managed on the user's PC. text/html 2021-06-29T08:35:43+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/faq:smtp_relay_service?rev=1624955743&do=diff SMTP Relay Service FAQ We provide an SMTP Relay Service for many of our customers. The price starts from £40 (+VAT if applicable) per year, for up to 5000 messages, or 750MB, per month. How do I order the SMTP Relay Service? To order the SMTP relay service, either email text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/faq:vpop3av?rev=1542192349&do=diff What is the VPOP3 Antivirus solution? “VPOP3 Antivirus” is a new product to replace the avast! for VPOP3 product which will no longer be supported after the end of 2012. VPOP3 Antivirus uses the popular 'ClamAV' virus scanner to scan incoming and outgoing messages for viruses. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/faq:will_i_receive_a_vat_invoice?rev=1542192349&do=diff Will I receive a VAT invoice? We always send out VAT invoices for all purchases. These are sent as PDF files by email within a few days after your purchase. You can also access the invoices on our website, by logging into our website using your login details. vat invoice text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/faq:windows_server_port_conflicts?rev=1542192349&do=diff Windows Server Port Conflicts LDAP Server Conflict When you run VPOP3 on a server edition of Windows you may receive an error saying LDAP server not started - couldn't bind socket port 389 (10048) This error happens because VPOP3 contains an LDAP (Lightweight Directory Access Protocol) server for its global address book functionality, and the Windows 2000/2003 'Active Directory Service' also uses LDAP as its mechanism. These two services are conflicting. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/fatal:connection_limit_exceeded_for_non-superusers?rev=1542192349&do=diff FATAL: connection limit exceeded for non-superusers This error means that there are too many connections to the PostgreSQL database server. VPOP3 having exclusive use of database If only VPOP3 is using the PostgreSQL database, then you can reduce the number of connections that VPOP3 will make to the database at once. This is set in the VPOP3 settings at text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:421_4.3.2_vpop3_smtp_server_access_disabled_-_content_scanner_problem?rev=1542192349&do=diff 421 4.3.2 VPOP3 SMTP Server access disabled - content scanner problem! This usually happens if the “VPOP3 AV” virus scanner has a problem it can't automatically recover from. This may be a fatal error, or a licencing issue. You can check this on the Settings text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:10503?rev=1542192349&do=diff Socket Error 10503 - No More Data Error 10503 means that the connection between VPOP3 and a remote computer (normally your ISP) was dropped at an unexpected time. This is different from the error 10054 in that this is a controlled line drop. One way this can happen is if the ISP's POP3 server uses an obsolete standard which allows it to drop the connection if a POP3 'LIST' command is performed on an empty mailbox. The current standard requires that the connection is not dropped until the clien… text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:creating_extra_smtp_services?rev=1542192349&do=diff Creating Extra SMTP Services In VPOP3 Enterprise (not VPOP3 Basic) you can create multiple SMTP services. This can be useful if you want VPOP3 to listen on different ports and/or have different settings. There are two ways of doing this. Have a single SMTP service listening on multiple ports or IP addresses text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:data_stream_contained_nul_character?rev=1542192349&do=diff Data stream contained NUL character Description of the problem NUL characters (bytes with value 0) are not allowed in email messages and should not be transmitted over POP3, SMTP or IMAP4 except in certain circumstances. If an attachment contains such a byte it must be encoded using text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:database_size?rev=1542192349&do=diff VPOP3 Database Size The VPOP3 directory is stored in the VPOP3\pgsql\data folder and subfolders. If you are concerned about the size of the VPOP3 database, there are several factors which may make the database larger than you would expect: * The VPOP3 database contains a lot more information than just messages in mailboxes. This can include settings, outgoing messages, historical logging information, statistical information for the spamfilter, information about archived messages, etc. Also,… text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:delete_outqueue_messages_directly_from_the_database?rev=1542192349&do=diff Delete OutQueue messages directly from the database If there is an extremely large number of messages (eg hundreds of thousands) in the VPOP3 OutQueue, then it may take a very long time for VPOP3 v5 and later to start as it check the message database tables for consistency during initialisation. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:err_can_t_open_the_message_file_-_it_s_gone?rev=1542192349&do=diff -ERR Can't open the message file - it's gone! If VPOP3 receives the error message “-ERR Can't open the message file - it's gone!” from your ISP's POP3 server when it is downloading messages, this is a symptom of a fundamental bug in your ISP's POP3 server. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:error_message_after_sending_rcptto_-_error_0_-_text_550_5.7.1_relaying_not_allowed_bad_sender_ip_address?rev=1542192349&do=diff Error message after sending RCPTTO: - error 0 - text 550 5.7.1 Relaying not allowed! Bad sender IP address If you get this error message from within Webmail, then it usually means that the SMTP service access restrictions are blocking Webmail from sending mail. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:exchange_2003?rev=1542192349&do=diff Setting up VPOP3 to work with Exchange 2003 The instructions below are for Exchange Server 2003. For other versions of Exchange see here. You can link VPOP3 to Exchange Server, so that Exchange Server sends outgoing mail through VPOP3 and VPOP3 sends any incoming mail directly to Exchange Server. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:general_configuration_tasks?rev=1542192349&do=diff Initial Configuration Tasks After installing VPOP3, you will need to get into the VPOP3 settings. The easiest way of doing this is to find the VPOP3 Status Monitor in the Windows task tray. Right-click this icon, and choose 'VPOP3 Settings'. (If that doesn't work, see this article to troubleshoot Status Monitor problems). Alternatively, on the VPOP3 PC, you can go to Start text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:incoming_smtp_feed?rev=1542192349&do=diff Incoming SMTP Feed An incoming SMTP feed is where incoming mail is sent directly to your mail server without going through your ISP's POP3 mail server on the way. Advantages An incoming SMTP feed has several advantages over going via a POP3 mailbox: text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:installed_new_router_and_now_nothing_works?rev=1542192349&do=diff We installed a new router and now nothing works If you installed a new router on your network and left it at the default settings, you may find that VPOP3 doesn't seem to work afterwards. This is because it may be that the new router allocates new IP addresses on your network. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:installing_postgresql_database_on_another_port?rev=1542192349&do=diff How to install PostgreSQL to use another port If the VPOP3 computer has a version of PostgreSQL older than version 8.3 installed for other software, and you can't/don't want to remove that you need to set up the PostgreSQL 8.3 or later for VPOP3 to use a different TCP/IP port number. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:internationalisation?rev=1542192349&do=diff Internationalisation VPOP3 has two places where internationalisation can be carried out. In the VPOP3 directory on the server are some *.LNG files. These are language files for the WebMail interface. You can create a new language file by copying the ENGLISH.LNG to another file, eg FRANCAIS.LNG, and then use a text editor (eg Notepad) to edit the text strings in there (the text after the '=' on each line text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:is_it_possible_to_stop_messages_that_vpop3_downloads_from_being_marked_as_read?rev=1542192349&do=diff Is it possible to stop messages that VPOP3 downloads from being marked as read? VPOP3 does not mark messages as read when it downloads them. In fact, the POP3 protocol doesn't have a system available for marking messages as read, so it is impossible for VPOP3 to mark messages as read. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:mx_send_warning?rev=1542192349&do=diff MX Send Warning - ..... If you see the text 'MX Send Warning - <error message>' in the VPOP3 status monitor, that means that VPOP3 is trying to send a message to another mail server using the MX send method (direct to the recipient's mail server) and text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:out_of_disk_space_when_sending_mail?rev=1542192349&do=diff Out of Disk Space When Sending Mail The first thing you should do is check that there is enough free disk space on the disk where VPOP3 is installed. VPOP3 requires a certain amount of free space before it will allow new messages to be sent, so the disk might not be totally full, but VPOP3 will still report that there is insufficient disk space when you try to send a new message. This buffer zone is designed to help prevent the disk totally filling up, which can cause lots of bigger problems! text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:quarantine?rev=1542192349&do=diff Spam Quarantine By default, when the VPOP3 spam filter detects a message as being spam, it will go to the user's quarantine. Users can release messages from the quarantine by going to their webmail page and selecting the message from the quarantine list there. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:rbl_checking_not_working_in_vpop3_enterprise?rev=1542192349&do=diff RBL Checking not working in VPOP3 Enterprise VPOP3 Enterprise has an RBL checking feature which is configured in the VPOP3 Settings at Services -> SMTP Server -> SPAM Reduction -> Realtime Blacklist Rules If it does not seem to be working properly, there are a few reasons why the RBL feature may not work. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:restore_a_backup_of_vpop3?rev=1542192349&do=diff How to Restore a backup of VPOP3 The instructions below are to restore a full backup. You may also be able to recover deleted messages if you do not need to restore a full backup. Version 5 or later If you just need to restore a database backup, see steps 4 to 7 below. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:sender_policy_framework?rev=1542192349&do=diff Sender Policy Framework / SPF SPF is a system used to tell mail servers which IP addresses can send mail from which domains. It is designed to reduce 'spoofing' of email addresses. For instance, if you receive an email message from your bank, your mail software can check that it came from an IP address authorised to send mail from your bank, and treat the message with suspicion if it didn't come from an authorised IP address. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:smtp_client_problem?rev=1542192349&do=diff VPOP3 - SMTP Client Problem These errors occur whilst VPOP3 is communicating with your ISP's SMTP mail server to send your mail. If the message text is: Error with SMTP Client (XXXX (YY)) The server connection was closed unexpectedly Then this means that the the connection between VPOP3 and your ISP's SMTP mail server was closed when VPOP3 did not expect it to be. This can be caused by the network connection failing or a bug in the ISP's mail server which drops the connection in abnormal circ… text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:some_client_pcs_cannot_access_vpop3?rev=1542192349&do=diff Some PCs cannot access VPOP3 when VPOP3 is connected to the Internet This error happens when you have multiple TCP/IP subnets on your network. The computers which are on different subnets from the VPOP3 computer will not be able to see VPOP3 whilst VPOP3 is connected to the Internet (through a dial-up connection). Whenever VPOP3 is offline, it will work correctly. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:timeout_while_vpop3db_is_starting?rev=1542192349&do=diff Timeout while VPOP3DB is starting (Note that VPOP3 v6.11 and later, the service startup system has changed so it should not suffer from this problem) When VPOP3DB starts up, the service control manager component waits a set time for a response from the database server before it knows the service has started. If the PC is going slow (eg after a Windows update or if the PC is just slow) then this wait may not be long enough. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:too_many_logins?rev=1542192349&do=diff "Too many logins" error message VPOP3 version 4 and later have a limit on the number of concurrent logins which can be received for a single user or from a single IP address. This is to prevent a single user from bringing the server down. The current default limits are 20 per user, or 1000 per IP address (to allow multiple people sharing a NAT IP address) text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:v2_-_move_to_a_new_folder?rev=1542192349&do=diff How To Move VPOP3 Version 2 to a New Folder/Drive on the same PC (Also applies to version 1.x) To move VPOP3 to a new folder or drive on the same PC you should go through the following steps: * Copy the VPOP3 directory and subdirectories from the old folder to the new folder. text/html 2018-12-05T15:25:41+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:v3_-_move_to_a_new_folder?rev=1544023541&do=diff How to move VPOP3 V3 to a new folder This guide assumes you want to move the whole of VPOP3 (including the message store) to a new folder on the same PC * Stop VPOP3 * Stop PostgreSQL * Remove the PostgreSQL service * Move VPOP3 to the new folder text/html 2026-04-21T11:12:40+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:v5_-_move_to_a_new_pc?rev=1776769960&do=diff Move VPOP3 Version 5 (or later) to a new PC Moving VPOP3 Version 5 or later to a new PC is slightly different from moving earlier versions, because of the database system, which was introduced for version 3 and modified for version 5. The summary of steps is: * Stop VPOP3 on the original PC text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:vpop3_is_using_a_lot_of_disk_space?rev=1542192349&do=diff VPOP3 is using a lot of disk space If VPOP3 is using a lot of disk space, the problem is usually that there is lots of data there, so it has to use the disk space. Message Storage In VPOP3 version 5 and later, all users' messages are stored in the database, so they will occupy space in the VPOP3\pgsql\data folder. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/how_to:vpop3_xxxxx_server_access_not_allowed_-_see_your_administrator?rev=1542192349&do=diff Error Message - VPOP3 xxxx Server Access Not Allowed - See Your Administrator If you get an error message when trying to connect to the VPOP3 SMTP/POP3/IMAP4/etc service which says VPOP3 xxxx Server Access not allowed - See your administrator (where xxxx is replaced with the specific service name, and there may be protocol specific error codes before the message) text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/mailapi:userruleactions?rev=1542192349&do=diff UserRuleActions Replacement Use: ~userruleactions~ <format string> ~end~ Required parameter: RuleId This returns the message rule actions for the specified rule The format string can have the replacements * id - numeric ID of the action * type - action type text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:address_book_tab?rev=1542192349&do=diff Address Book tab The Address Book tab within VPOP3 webmail enables you to manage your lists of contacts and add those contacts into a new or existing message. Substantial alterations to the interface were introduced in version 5. Both interfaces are documented. text/html 2026-03-23T15:29:29+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:autoresponder_global_script?rev=1774279769&do=diff Autoresponder Global Scripting For scripting to modify the autoresponder text which is embedded in the autoresponder itself, see Autoresponder Scripting The Autoresponder Global Script is executed for every autoresponse. It is stored in the 'Autoresponder.lua' script in Settings → Scripts text/html 2025-05-28T09:24:38+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:autoresponder_script?rev=1748424278&do=diff Autoresponder scripting For scripting to alter the whole autoresponder definition and set in the VPOP3 settings rather than embedded in an autoresponder itself, see Autoresponder Global Scripting In an autoresponder, you can create a Lua script by surrounding it with <lua> & </lua> tags, eg text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:connections?rev=1542192349&do=diff Connections In VPOP3 a Connection tells VPOP3 how to 'connect' to the Internet. VPOP3 supports up to 10 Connections, which can be either network connections or Dial-Up connections (using a modem) A Connection is linked to one Mail Sender and zero or more Mail Collectors. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:copy_smtp_rules?rev=1542192349&do=diff Copy SMTP Rules - Database Query This is an advanced Database action. There is no simple query that will perform the required operation, so we have to create a custom PostgreSQL function to copy the data. At a command prompt in the VPOP3 directory run text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:database_files_used_in_vpop3_2.x?rev=1542192349&do=diff Database files used in VPOP3 2.x VPOP3 2.x usually uses SQLite 2.8.3 as its database engine. This stores databases in discrete *.db files in the VPOP3\_database directory on the server PC. We do not recommend that you access these databases directly unless you know what you are doing, and we strongly discourage the alteration of data in the databases directly unless technical support request you to. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:diagnostics?rev=1542192349&do=diff Settings -> Diagnostics The Diagnostics page allows you to enable, configure and disable various methods of diagnostic logging, within VPOP3. Log file overview By default, VPOP3 will keep two copies of most log files: * The current log file, with a text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:groups?rev=1542192349&do=diff Groups In VPOP3 a 'group' is mainly an administrative feature. If you only wish to have a list of email addresses to send messages to under one address, you should use the 'List' feature instead. The main function of Groups is to let you set certain user attributes for a whole group of users at once. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:imap4_advanced?rev=1542192349&do=diff IMAP4 -> Advanced tab This page is reached from Services -> IMAP4 Server, then the Advanced tab. Here are some advanced options for the IMAP4 service in VPOP3 Fake access to inaccessible mailboxes In the IMAP4 service you may have folders which do not exist. For instance, if you are accessing a shared Inbox folder from a user called 'Karen', then their folder will be called text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:incoming_smtp?rev=1542192349&do=diff Incoming SMTP Mail If you have an incoming SMTP mail feed, then the mail server sending mail to you will connect to your VPOP3 computer to send the mail. The mail connection is controlled by the sending computer. IMPORTANT If you have a permanent Internet connection with a static IP address, the usual way of having incoming SMTP is to configure your text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:listserver_commands?rev=1542192349&do=diff ListServer Commands The ListServer is an automated process in VPOP3 which manages mailing lists. People can send commands to the ListServer to perform various functions remotely. Whether these commands are allowed, and exactly how they work depends on the particular mailing list's settings. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:logging?rev=1542192349&do=diff Logging Activity Summary Reports You can tell VPOP3 to send you a daily summary report each day. To do this check the box to say Send daily summary logs to, and choose the appropriate user (or “Main Administrator” if you want the reports to be sent to the text/html 2026-02-24T15:50:03+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:lua_smtp_mx_server_rules?rev=1771948203&do=diff Lua SMTP MX Server Rules Every time VPOP3 checks for remote MX server for sending messages using direct MX sending, it runs a script called mxserverrules.lua which can be created/edited in Settings -> Scripts (or in the VPOP3 directory in VPOP3 v6.6 or earlier). text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:message_archive?rev=1542192349&do=diff Message Archive The Message Archive facility is for VPOP3 to store copies of all messages sent or received. It stores the messages in a central archive store which can be searched by an administrator. The prime purpose of the archive facility is for recording messages in case of possible disputes, as you can see what was sent/received by email. It can also be used as a backup/restore facility in an emergency, but that is not its prime purpose, so it is better to have a proper text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:quarantine_viewer?rev=1542192349&do=diff Spamfilter Quarantine Viewer Settings -> Spamfilter -> Quarantine Viewer The Quarantine Viewer lets you see messages which have been quarantined by the VPOP3 Spam Filter. As an administrator you can see quarantined messages for any user, and release them if appropriate. If you release a message, it will be sent into the original recipient's Inbox, not into your Inbox. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:running_database_updates_within_a_transaction?rev=1542192349&do=diff Running database updates within a transaction This is a trick which database experts use, because they have learned (often the hard way) that a simple mistype can trash a database... Before running any database query which can alter the database (UPDATE, DELETE, INSERT, DROP, CREATE, ALTER) begin a database transaction using the text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:scheduling_management_scripts?rev=1542192349&do=diff Scheduling Management Scripts VPOP3 runs a script called scheduler.lua in the background, it will periodically call functions in this script at approximately 1 minute, 5 minute, 1 hour and 1 day intervals. These times are only approximate so should not be relied upon for timing. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:security_intrusion_protection?rev=1542192349&do=diff Security Settings -> Intrusion Protection Tab Settings -> Security Settings -> Intrusion Protection Tab Starting in VPOP3 v6.0, VPOP3 can monitor failed logins for all accounts across all services and block an attacker's IP address from accessing VPOP3 for a specified time text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:sender_direct_settings?rev=1542192349&do=diff SMTP Direct Sender Settings Mail Connectors -> Mail Senders -> SMTP Direct Sender -> Settings tab The SMTP Direct Settings tab lets you set how VPOP3 will send mail using SMTP Direct DNS Servers to Use This setting tells VPOP3 the IP addresses of the DNS servers it should use to find the recipients' mail servers. Separate multiple addresses with commas. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:smtp_filtering?rev=1542192349&do=diff SMTP Service - Filtering The SMTP Server -> Filtering tab lets you set up filtering of messages going through the VPOP3 SMTP service. This may be incoming SMTP messages, or locally sent messages. SMTP Rules SMTP Rules let you create custom rules for processing messages as they go through the VPOP3 SMTP service. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:smtp_ids_ips?rev=1542192349&do=diff SMTP Server -> IDS/IPS The IDS/IPS tab lets you set logging and automatic blocking parameters for the IDS (Intrusion Detection System) and IPS (Intrusion Prevention System) component of the SMTP server. SMTP servers are regularly attacked, both by incoming mail attacks (spam/viruses etc) and relay attacks (by spammers and other malware distributors trying to send mail through them). Because of this, there is a system in VPOP3 which will track attack attempts on the SMTP service and can automat… text/html 2026-03-26T11:41:59+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:smtp_rules_script?rev=1774525319&do=diff Lua SMTP Rules Scripts When VPOP3 is processing SMTP Rules for messages received by SMTP, it runs a script called smtprules_(x).lua, where (x) is replaced by the numeric ID of the SMTP service VPOP3 processes SMTP Rules at least three times for each message - once when MAIL FROM has been received, once for each RCPT TO, and once when the whole message data has been received. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:spamfilter_rule_weights?rev=1542192349&do=diff Spamfilter Rule Weights To edit the spamfilter rule weights, go to Settings -> Spamfilter -> General -> Rule Weights The VPOP3 spamfilter contains several rules which test for certain things, eg 'adult words', or entries in real-time blacklist databases, or whitelisted email addresses etc. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:spamfilter_script_configuration?rev=1542192349&do=diff Spamfilter Script Configuration tab You reach this tab by going to Settings --> Spam Filter -> General, and then choose the General tab. The Spamfilter script has various settings that can be changed to alter the behaviour of the spamfilter. These are defined in the script, so may change with different versions of the script. The settings are currently: text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:spamrules_longsenderdomain?rev=1542192349&do=diff Spamrules example - increase spam score for long sender domain This script is for the case where you to increase the spamminess of emails where the sender's email address contains a long domain. In this case we'll say if the sender's domain has 20 or more characters in the first section (between the @ and first .). Note that we do not necessarily recommend that you do this as it is not a very good indicator of spam, but it is something we've been asked for, so here it is. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:spamrules_statement_addheader?rev=1542192349&do=diff Spam Filter Rules: AddHeader Statement AddHeader Version 2.1.7+ Purpose Allows you to add, replace or remove the specified header line in the message headers The AddHeader statement requires the full header line in one continuous string, in the format text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:spamrules_statement_dbupdate?rev=1542192349&do=diff Spam Filter Rules: DBUpdate Statement DBUpdate Version 6.16+ Purpose Updates a record in the spam filter database The DBUpdate statement requires a component name, key, operator and value, in the format DBUpdate <component name> <key> <operator> <value> text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:spamrules_statement_getdecodedsection?rev=1542192349&do=diff Spam Filter Rules: GetDecodedSection Statement GetDecodedSection Version 2.1.11+ Purpose Returns a specified MIME section of a message into a variable, after processing any Base64 or Quoted-Printable encoding of the raw message data The GetDecodedSection text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:spamrules_statement_star_stop?rev=1542192349&do=diff Spam Filter Rules: *STOP Statement *STOP Version 2.2.5+ Purpose Stops the parsing of the current spam filter script file The statements after the *STOP statement are not parsed, so will not cause syntax errors if they involve unrecognised commands. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:spamrules_statement_zipcontents?rev=1542192349&do=diff Spam Filter Rules: ZipContents Statement ZipContents Version 6.7+ Purpose Enables the script to obtain the list of files contained in a ZIP attachment The ZipContents statement requires a message section number and bag name, in the format ZipContent <message section number> <bag name> text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:spamrules_statement_zipcontentsfull?rev=1542192349&do=diff Spam Filter Rules: ZipContentsFull Statement ZipContentsFull Version 6.7+ Purpose Enables the script to obtain the list of files contained in a ZIP attachment The ZipContentsFull statement requires a message section number and bag name, in the format text/html 2026-02-19T17:56:27+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:temporary_files?rev=1771523787&do=diff Temporary Files This is for files in the VPOP3\_temp folder Most of the filename is the hexadecimal timestamp (in Windows 'FILETIME'/65536 form) with a 4 digit hex sequential number afterwards. The first letter or two (usually G-Z) can tell something about what caused the file. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:user_advanced?rev=1542192349&do=diff User Advanced settings The Edit User → Advanced tab contains some 'advanced' settings for a VPOP3 user. Message Recycle Bin In VPOP3 Enterprise (v5 and later) the Message Recycle Bin will keep messages in the message store for a short time after the user has deleted the messages. This is to allow easier recovery from the inevitable case where a user has deleted messages by mistake, and wants them back. text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:user_autoresponder?rev=1542192349&do=diff Autoresponder An autoresponder is a way of automatically replying to messages as they arrive in a user's mailbox. In VPOP3, an incoming message must arrive in a user's mailbox for the autoresponder to trigger. If you use forwards, assistants, mappings, etc to divert a message before it arrives in the mailbox, the autoresponder will never trigger. If you want to use an autoresponder, but not keep the original message, then make sure the message arrives in the mailbox (eg by using an 'Assistant'… text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:using_tables?rev=1542192349&do=diff Using tables/grids Many VPOP3 settings pages use grids to show you a set of data, for instance on the Users, Mappings and Lists pages. These have several standard features which are described below. * Most of the grids are 'delayed-fill'. This means that they don't fill up with data immediately when the page is loaded, this is to speed up the page load times. Only the first (visible) section of the grid is filled at first (sometimes there may be a short delay before this is filled, if the da… text/html 2018-11-14T10:45:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/reference:webmail_status_bar?rev=1542192349&do=diff Webmail Status bar The Status bar within VPOP3 webmail displays important information at a glance. [VPOP3 version 5.0 Webmail Status bar] User - At the far left, is a display to let you know which user is currently logged in. Version - After the username, there is an indication of the current VPOP3 version. text/html 2026-03-16T16:00:10+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.pscs.co.uk/wiki:syntax?rev=1773676810&do=diff Formatting Syntax DokuWiki supports some simple markup language, which tries to make the datafiles to be as readable as possible. This page contains all possible syntax you may use when editing the pages. Simply have a look at the source of this page by pressing