Fulltext results:
- Settings -> Diagnostics @reference
- . ===VPOP3 Service Logs=== * **Log POP3 Server Connections** (Connections between POP3 email client and VPOP3) - //pop3svr.log// * **Log SMTP Server Connections** (incoming SMTP or connections between email client and VPOP3) - //smtpsvr.log// * **Log IMAP4 Server Conne
- Mail Connectors -> Connector Schedule @reference
- , VPOP3 will immediately connect to the 'default' Connections If you create a file called **CONNECT.PAUSE** in... v6.1 and later), VPOP3 will not perform scheduled connections. This can be useful if you wish to start VPOP3 'p... ule is enabled or not. ====Caution with multiple connections===== Note that if you have multiple connections configured, then each time the scheduler 'triggers', all the c
- Connections @reference
- ======Connections====== In VPOP3 a **Connection** tells VPOP3 how to 'connect' to the Internet. VPOP3 supports up to 10 **Connections**, which can be either network connections or Dial-Up connections (using a modem) A **Connection** is linked to one **[[mail senders|Mail Sender]]** and
- How To Encrypt Sessions @how_to
- also support this for backward compatibility. SSL connections are usually done on a different TCP port from nor... g POP3 is on port 110, POP3S is on port 995). SSL connections are encrypted from the start, so any connections on that port MUST be encrypted. - STARTTLS - (this is call... thod, but recent versions of Outlook do. STARTTLS connections are carried out on the same port as normal (eg po
- FATAL: connection limit exceeded for non-superusers @fatal
- s====== This error means that there are too many connections to the PostgreSQL database server. =====VPOP3 ha... reSQL database, then you can reduce the number of connections that VPOP3 will make to the database at once. Thi... s at **Settings -> Database -> Connection**, "Max Connections". The default value here is 50 Also, there's a r... ses'. The default of this is 80. If the number of connections has reached the normal 'Max Connections' limit, a
- 421 4.3.2 VPOP3 Too many connections from your IP address - try later @how_to
- ======421 4.3.2 VPOP3 Too many connections from your IP address - try later====== If you see this error message... ans that VPOP3 has detected too many simultaneous connections from your IP address. This would usually happen ... er mail server as they can make many simultaneous connections when there are lots of messages to send. The erro... ssions once they have been finished, thus leaving connections open until the limit is reached. This can be chec
- Mail Collectors @reference
- il Collector** is associated with one or more **[[Connections]]**. The VPOP3 **[[Schedule|Connector Schedule]]*... ail, then you can associate them with different [[Connections]] and define different [[Schedule|Schedules]] for the different Connections. ====Use this Mail Collector with these Connections==== This section lets you select which Connections this M
- Incoming SMTP Feed @how_to
- off at night. * You have to allow incoming SMTP connections through your firewall (port 25 TCP) to the VPOP3 computer * Your ISP has to allow incoming SMTP connections to you on port 25. A few ISPs will block port 25 ... , as it is always listening out for incoming SMTP connections. Usually all you need to do is: - Open up incoming TCP port 25 connections on your firewall, and direct them to the VPOP3 co
- Socket Error 10055 - No Buffer Space Available @how_to
- run out of TCP/IP socket buffers because too many connections are open at once. Things to check if this happen... me malware is badly written and will use a lot of connections * Use a program such as [[http://technet.micros... with the -b parameter) to see which programs have connections open Current versions of Windows can support many thousands of IP connections at once. Server versions can support more than de
- IMAP4 -> Advanced tab @reference
- n mean that VPOP3 suddenly has to handle 200+ new connections. It will do this, but it may take some time - the... is happening, and will reconnect with a new 200+ connections. After a short time VPOP3 will grind to a halt pr... well-behaved clients will limit themselves to 3-5 connections, so allowing 20 concurrent connections will allow about 4 people/devices to access the same mailbox at once. I
- Remote Access to VPOP3 without a permanent Internet connection @how_to
- rvice and configure this to allow incoming TCP/IP connections. If the Remote Access Server is running on the V... this by going to ''Settings - Network and Dial-up connections - Make New Connection''. Then choose ''Accept Incoming Connections'' and set it up appropriately. If the ''Remote A
- ISP needs SSL connection @how_to
- standard and not recommended system of encrypting connections to their SMTP mail servers. These generally are called 'SSL' connections and work on an alternate port other than the standard SMTP port 25. (The correct way to encrypt connections is to use a system called TLS which works on the
- SMTP Relay Protection in VPOP3 @how_to
- to local users (this is needed for incoming SMTP connections). =====To protect VPOP3 2.0.0 and later===== On ... .255.255.255 If you don't do this, any incoming connections through the proxy server will be allowed, regardl... he user's computer is - this is because all these connections will appear to be coming from the proxy server's
- Accepting Incoming SMTP through a router @how_to
- s' default configuration will only allow outbound connections (ie connections from the local network out to the Internet). If you need to accept incoming SMTP mail, then you need to tell the router to allow inbound connections on port 25 for the IP address of the mail server.
- SMTP Service -> Advanced Tab @reference
- [[SMTP Server]] -> Advanced Tab ====Refuse SMTP Connections from==== This setting should be rarely needed, an... text in this box, then VPOP3 will refuse any SMTP connections from clients whose 'HELO'/'EHLO' command data con... set to '.myisp.com', then VPOP3 would refuse SMTP connections from any client which sends the command 'HELO box