Fulltext results:
- VPOP3 Status Monitor Problems @how_to
- g into VPOP3 as a user, so different users can be configured to access different features through the status ... se **Disconnect from VPOP3 Server** then choose **Configure Status Monitor**. In the settings window that app... Settings** then that usually means that you have configured to status monitor to log in as a user who is not... , choose **Disconnect from VPOP3 Server**, then **Configure Status Monitor**, and check the username and pass
- 550 5.7.1 Relaying not allowed! Bad sender IP address @how_to
- from outside your local network, and you have not configured VPOP3 to allow this. You have to be careful when allowing this, because you may configure VPOP3 to be an open-relay, which is a **bad thing... ough_vpop3|instructions here]] telling you how to configure VPOP3 to allow relaying of mail from outside your... are many different possible ways that you need to configure it, so you need some networking experience to dec
- VPOP3 Server Access Not Allowed @how_to
- -192.168.0.255 In VPOP3 2.0.0 and later, it will configure itself with automatically detected access restric... r go to the **Local Servers** tab and press the **Configure** button on the relevant line). In the Window th... 1.5.0 will ask at installation if you want it to configure a default set of access restrictions, with a mess... l the default access restrictions, but you should configure them manually on the Local Servers -> Config wind
- How To Setup VPOP3 Service Security @how_to
- Setup VPOP3 Service Security====== VPOP3 can be configured to restrict access to its various services depen... allowed). Note that with SMTP, if the service is configured never to require authentication, then you cannot... hy, it should be relatively clear how you need to configure the access restrictions to do what you require. ... details are changed since VPOP3 started, it will configure the settings incorrectly using this button. This
- Incoming SMTP Mail @reference
- ress, the usual way of having incoming SMTP is to configure your DNS 'MX' records to point to your external I... uration to allow this to work. You do NOT need to configure an //SMTP Mail Collector// in VPOP3. See [[how_to... account, then, in this case, you //may// need to configure an SMTP Mail Collector. In these days of permanen... need an SMTP Mail Collector===== You will need to configure an SMTP Mail Collector in VPOP3 if either: * Yo
- Using a Mobile Phone with VPOP3 @how_to
- il. To do this, you need to do three things: * Configure your router/firewall to allow incoming connection... ote_access_to_vpop3_mailboxes#vpop3_configuration|Configure VPOP3 to allow access from the Internet]] * Configure the mobile phone's email client software to connect
- We installed a new router and now nothing works @how_to
- ion Protocol) Usually the best thing to do is to configure the new router's DHCP service to match the settin... ns**. * Go to **Start -> Programs -> VPOP3 -> Configure VPOP3** which should get you into the VPOP3 setti... twork range. In this case you will need to change the manually configured IP address of the VPOP3 computer.
- ListServer Settings @reference
- ably forged, email address about the problem ====Configured ListServers List==== In VPOP3 Enterprise, you co... you about the lists which it manages itself. You configure the extra list servers in the [[mailing_lists|Lis... criptions]] configuration itself. This section here just lets you view the list servers which are configured.
- Incoming SMTP Feed @how_to
- n if you ask). This is a security thing, as badly configured mail servers can be used by spammers. * You have to make sure that you don't configure your VPOP3 server as an **open relay**. By defaul... short time, it is usually no problem at all. Well configured mail servers will queue and retry messages which
- Creating Extra SMTP Services @how_to
- 2525, etc or multiple IP addresses (if your PC is configured with them). The SMTP service will have an identi... the list at the left of the screen. This will be configured to listen on port 5025 (or the first spare port ... on levels above, you must have [[encrypt_sessions|configured an SSL certificate into VPOP3]]) Often people w
- How to configure Outlook 2010 @how_to
- ======How to configure Outlook 2010====== In many ways, configuring Outlook 2010 is a similar to configuring ... utlook2010smtp3.png|}} =====Address Book===== To configure Outlook to use the VPOP3 global address book, go
- Mappings @reference
- n the appropriate Mail Collector (POP3 Routing -> Configure Routing Options, the "Disable default user -> use... e a Mapping of ''mike -> *REMOTE''. What then is configured, then if a local user sends a message to mike@my
- How to configure Outlook 2003 @how_to
- ======How to configure Outlook 2003====== =====Email===== (to be completed) =====Address Book===== To configure Outlook to use the VPOP3 global address book, go
- How to configure Outlook 2007 @how_to
- ======How to configure Outlook 2007====== =====Email===== =====SMTP Authentication===== To set up SMTP aut... utlook2007smtp3.png|}} =====Address Book===== To configure Outlook to use the VPOP3 global address book, go
- Mail Connectors -> Mail Senders @reference
- almost certainly need to have a reverse DNS entry configured for your Internet IP address, contact your ISP f... ial-up account from your IP address, and they are configured to reject mail from dial-up accounts. If you sti